6K 초극저온 인장 시험 : Fe-Mn-Cr 강의 미세조직 및 기계적 물성

Materials with superior cryogenic strength and good ductility are increasingly in demand for resident friendly liquid-hydrogen (20K) storage tanks. Additionally, the space industry also requires materials that retain excellent mechanical properties at extremely low temperatures. However, mechanical...

Celý popis

Uložené v:
Podrobná bibliografia
Vydané v:대한금속재료학회지 Ročník 61; číslo 6; s. 389 - 396
Hlavní autori: 김영균, Young-kyun Kim, 임가람, Ka-ram Lim, 나영상, Young-sang Na
Médium: Journal Article
Jazyk:Korean
Vydavateľské údaje: 대한금속재료학회 05.06.2023
Predmet:
cryogenic strength
Fe-Mn-Cr steel
liquid helium
mechanical properties
microstructure
ISSN:1738-8228
On-line prístup:Získať plný text
Tagy: Pridať tag
Žiadne tagy, Buďte prvý, kto otaguje tento záznam!
Popis
Shrnutí:Materials with superior cryogenic strength and good ductility are increasingly in demand for resident friendly liquid-hydrogen (20K) storage tanks. Additionally, the space industry also requires materials that retain excellent mechanical properties at extremely low temperatures. However, mechanical testing at such low temperatures is highly limited due to the difficulties in achieving and maintaining such conditions, while also providing adequate thermal insulation to prevent heat transfer from the surrounding environment. In this study, we present a novel tensile testing technique for a Fe-15Mn-13Cr-3Si-3Ni-0.1C (wt.%) steel at the temperature of liquid helium. To minimize the use of expensive liquid helium, we adopted a method of injecting liquid helium vapor and set the temperature for tensile testing at 6 K. The present alloy has a single face-centered cubic (FCC) structure with a large amount of stacking faults after annealing treatment. The Fe-Mn-Cr steel exhibited a superior ultimate tensile strength of 1200 MPa and good ductility of 35% at 6K. Moreover, compared with room temperature tensile tests, discontinuous plastic flow, i.e. serrated flow, occurred at extremely low temperature. (Received 26 February, 2023; Accepted 13 March, 2023)
Bibliografia:The Korean Institute of Metals and Materials
ISSN:1738-8228
DOI:10.3365/KJMM.2023.61.6.389