A Whisker-inspired Fin Sensor for Multi-directional Airflow Sensing

This work presents the design, fabrication, and characterization of an airflow sensor inspired by the whiskers of animals. The body of the whisker was replaced with a fin structure in order to increase the air resistance. The fin was suspended by a micro-fabricated spring system at the bottom. A per...

Celý popis

Uložené v:
Podrobná bibliografia
Vydané v:Proceedings of the ... IEEE/RSJ International Conference on Intelligent Robots and Systems s. 1330 - 1337
Hlavní autori: Kim, Suhan, Kubicek, Regan, Paris, Aleix, Tagliabue, Andrea, How, Jonathan P., Bergbreiter, Sarah
Médium: Konferenčný príspevok..
Jazyk:English
Vydavateľské údaje: IEEE 24.10.2020
Predmet:
Magnetic domains
Magnetic fields
Magnetic resonance imaging
Magnetic sensors
Magnetic tunneling
Robot sensing systems
Springs
ISSN:2153-0866
On-line prístup:Získať plný text
Tagy: Pridať tag
Žiadne tagy, Buďte prvý, kto otaguje tento záznam!
Popis
Shrnutí:This work presents the design, fabrication, and characterization of an airflow sensor inspired by the whiskers of animals. The body of the whisker was replaced with a fin structure in order to increase the air resistance. The fin was suspended by a micro-fabricated spring system at the bottom. A permanent magnet was attached beneath the spring, and the motion of fin was captured by a readily accessible and low- cost 3D magnetic sensor located below the magnet. The sensor system was modeled in terms of the dimension parameters of fin and the spring stiffness, which were optimized to improve the performance of the sensor. The system response was then characterized using a commercial wind tunnel and the results were used for sensor calibration. The sensor was integrated into a micro aerial vehicle (MAV) and demonstrated the capability of capturing the velocity of the MAV by sensing the relative airflow during flight.
ISSN:2153-0866
DOI:10.1109/IROS45743.2020.9341723