Simplified and programmable design approach for strain sensor interface

In this paper, a simplified technique is proposed which enables the user to nullify offset whenever power is switched on of the circuit and also based on the requirement of the user. In this method strain sensor is the part of the resistive bridge which is used as Quarter Bridge. The voltage excitat...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:ICRAIE : 2016 International Conference on Recent Advances and Innovations in Engineering : 23-25 December 2016 S. 1 - 4
Hauptverfasser: Rai, Anjali, Yadav, Deepak
Format: Tagungsbericht
Sprache:Englisch
Veröffentlicht: IEEE 01.12.2016
Schlagworte:
Analog-digital conversion
Auto Zeroing
Bridge circuits
Copper alloys
IDLE-Python 3.4
Nickel alloys
Resistance
Strain
Strain gauge
Strain measurement
ISSN:5090-2806
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:In this paper, a simplified technique is proposed which enables the user to nullify offset whenever power is switched on of the circuit and also based on the requirement of the user. In this method strain sensor is the part of the resistive bridge which is used as Quarter Bridge. The voltage excitation to the bridge is provided by a voltage reference. The output of the bridge reaches precision sensor signal amplifier through over-voltage protection circuit. Dynamic range and bridge offset adjustment both can be achieved in the circuit as per requirement. High precision Analog to Digital Converter digitizes data. The output is then captured on the monitoring computer to verify the results.
ISSN:5090-2806
DOI:10.1109/ICRAIE.2016.7939569