Black-box accuracy compensation for a cable-driven parallel robot

This paper presents the findings of experiments done to increase the accuracy of a fully constrained cable-driven parallel robot with 8 cables and 6 degrees of freedom. Measurements were conducted using a Laser Tracker in 3 dof and the position accuracy mapped. Measurements were performed in a grid...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:2017 17th International Conference on Control, Automation and Systems (ICCAS) S. 428 - 431
Hauptverfasser: Schmidt, Valentin, Kraus, Wrer, Martin, Christoph, Jin, Xuejun, Pott, Andreas
Format: Tagungsbericht
Sprache:Englisch
Veröffentlicht: Institute of Control, Robotics and Systems - ICROS 01.10.2017
Schlagworte:
Laser noise
Linear approximation
Measurement by laser beam
Measurement uncertainty
Parallel robots
Service robots
Systematics
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:This paper presents the findings of experiments done to increase the accuracy of a fully constrained cable-driven parallel robot with 8 cables and 6 degrees of freedom. Measurements were conducted using a Laser Tracker in 3 dof and the position accuracy mapped. Measurements were performed in a grid with 1920 points. From the measurement data distortion to the actual desired position is measured and using a linear approximation subsequent trajectories are compensated for any systematic errors. On an example robot, this black box correction brought an average improvement from 10.6 mm distance to the desired point to 2.47 mm distance from the desired point. This is a significant improvement m accuracy.
DOI:10.23919/ICCAS.2017.8204477