Optimized Trade-off Design of Gain and Noise Figure in LNAs for SDR-Based Compressed Spectrum Sensing

This paper presents a comprehensive study on the design and validation of Low-Noise Amplifiers (LNAs) optimized for Software-Defined Radio (SDR)-based Cognitive Radio Networks (CRNs). Aimed at enhancing the Signal-to-Noise Ratio (SNR) and improving compressed sensing efficiency, we developed a MATLA...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:2025 3rd International Conference on Electronics, Energy and Measurement (IC2EM) S. 1 - 6
Hauptverfasser: Benzater, Hadj Abdelkader, Azrar, Arab, Lassami, Nacerredine, Teguig, Djamal, Zeraoula, Hamza
Format: Tagungsbericht
Sprache:Englisch
Veröffentlicht: IEEE 06.05.2025
Schlagworte:
Cognitive radio
Cognitive Radio Networks
Compressed sensing
Compressed Spectrum Sensing
Gain
Graphical User Interface
Graphical user interfaces
MATLAB
Noise figure
Sensors
Signal to noise ratio
Software radio
Software-Defined Radio
System software
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:This paper presents a comprehensive study on the design and validation of Low-Noise Amplifiers (LNAs) optimized for Software-Defined Radio (SDR)-based Cognitive Radio Networks (CRNs). Aimed at enhancing the Signal-to-Noise Ratio (SNR) and improving compressed sensing efficiency, we developed a MATLAB-based graphical user interface to facilitate LNA design. The GUI integrates analytical methods to calculate critical parameters, including available gain, reflection coefficients, and matching networks, ensuring accuracy through comparison with simulations in Advanced Design System software. The proposed method delivers a peak gain of 17.16 dB, representing an improvement of 3.71 dB, while maintaining a noise figure of 0.35 dB, which is only 0.13 dB higher than the minimum achievable value, demonstrating an optimized trade-off between gain and noise performance. Real-case LNA parameters were used to validate the design, with ADS simulations confirming a negligible deviation of 0.02 dB in gain. These results highlight the effectiveness of the proposed approach in improving the SNR (by 7 dB) and detection efficiency for SDR-based systems.
DOI:10.1109/IC2EM63689.2025.11100394