Optimized Trade-off Design of Gain and Noise Figure in LNAs for SDR-Based Compressed Spectrum Sensing

This paper presents a comprehensive study on the design and validation of Low-Noise Amplifiers (LNAs) optimized for Software-Defined Radio (SDR)-based Cognitive Radio Networks (CRNs). Aimed at enhancing the Signal-to-Noise Ratio (SNR) and improving compressed sensing efficiency, we developed a MATLA...

Celý popis

Uloženo v:
Podrobná bibliografie
Vydáno v:2025 3rd International Conference on Electronics, Energy and Measurement (IC2EM) s. 1 - 6
Hlavní autoři: Benzater, Hadj Abdelkader, Azrar, Arab, Lassami, Nacerredine, Teguig, Djamal, Zeraoula, Hamza
Médium: Konferenční příspěvek
Jazyk:angličtina
Vydáno: IEEE 06.05.2025
Témata:
Cognitive radio
Cognitive Radio Networks
Compressed sensing
Compressed Spectrum Sensing
Gain
Graphical User Interface
Graphical user interfaces
MATLAB
Noise figure
Sensors
Signal to noise ratio
Software radio
Software-Defined Radio
System software
On-line přístup:Získat plný text
Tagy: Přidat tag
Žádné tagy, Buďte první, kdo vytvoří štítek k tomuto záznamu!
Popis
Shrnutí:This paper presents a comprehensive study on the design and validation of Low-Noise Amplifiers (LNAs) optimized for Software-Defined Radio (SDR)-based Cognitive Radio Networks (CRNs). Aimed at enhancing the Signal-to-Noise Ratio (SNR) and improving compressed sensing efficiency, we developed a MATLAB-based graphical user interface to facilitate LNA design. The GUI integrates analytical methods to calculate critical parameters, including available gain, reflection coefficients, and matching networks, ensuring accuracy through comparison with simulations in Advanced Design System software. The proposed method delivers a peak gain of 17.16 dB, representing an improvement of 3.71 dB, while maintaining a noise figure of 0.35 dB, which is only 0.13 dB higher than the minimum achievable value, demonstrating an optimized trade-off between gain and noise performance. Real-case LNA parameters were used to validate the design, with ADS simulations confirming a negligible deviation of 0.02 dB in gain. These results highlight the effectiveness of the proposed approach in improving the SNR (by 7 dB) and detection efficiency for SDR-based systems.
DOI:10.1109/IC2EM63689.2025.11100394