Effects of water inlet configuration in a service reservoir applying CFD modelling

This study investigated the state of a service reservoir of a drinking water distribution network. Numerical simulation was applied to establish its flow pattern, mixing conditions, and free residual chlorine decay. The influence of the change in the water inlet configuration on these characteristic...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Ingeniería e investigación Jg. 36; H. 1; S. 31 - 40
Hauptverfasser: Montoya Pachongo, Carolina, Laín Beatove, Santiago, Torres Lozada, Patricia, Cruz-Vélez, Camilo Hernán, Escobar Rivera, Juan Carlos
Format: Journal Article
Sprache:Englisch
Veröffentlicht: Bogota Universidad Nacional de Colombia 01.01.2016
Facultad de Ingeniería, Universidad Nacional de Colombia
Schlagworte:
CFD
Computational fluid dynamics
Computers
Drinking water
ENGINEERING, MULTIDISCIPLINARY
Fluid dynamics
free residual chlorine
mixing time
momentum flow
Reservoirs
service reservoir
tracer
CFD
tiempo de mezcla
Computational fluid dynamics
trazador
free residual chlorine
tracer
tanque de compensación
momentum flow
cloro residual libre
service reservoir
Dinámica de fluidos computacional
flujo de momento
mixing time
ISSN:0120-5609, 2248-8723
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:This study investigated the state of a service reservoir of a drinking water distribution network. Numerical simulation was applied to establish its flow pattern, mixing conditions, and free residual chlorine decay. The influence of the change in the water inlet configuration on these characteristics was evaluated. Four scenarios were established with different water level and flow rate as the differences between the first three scenarios. The fourth scenario was evaluated to assess the influence of the inlet configuration, momentum flow and water level on hydrodynamic conditions within the service reservoir. The distribution of four nozzles of 152.4mm diameter was identified as a viable measure to preserve the water quality in this type of hydraulic structures.
Bibliographie:ObjectType-Article-1
SourceType-Scholarly Journals-1
ObjectType-Feature-2
content type line 14
ISSN:0120-5609
2248-8723
DOI:10.15446/ing.investig.v36n1.50631