Receptance coupling based algorithm for the identification of contact parameters at holder–tool interface

To identify stable cutting conditions with a high depth of cut, stability lobe diagrams are used. In order to predict these diagrams, frequency response functions (FRF) at the tool tip are required for every tool, holder and machine combination. To reduce the number of experimental tests, receptance...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:CIRP journal of manufacturing science and technology Jg. 13; S. 37 - 45
Hauptverfasser: Matthias, W., Özşahin, O., Altintas, Y., Denkena, B.
Format: Journal Article
Sprache:Englisch
Veröffentlicht: Elsevier Ltd 01.05.2016
Schlagworte:
Chatter stability
Contact dynamics
Machine tool dynamics
Parameter identification
Contact dynamics
Parameter identification
Machine tool dynamics
Chatter stability
ISSN:1755-5817, 1878-0016
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:To identify stable cutting conditions with a high depth of cut, stability lobe diagrams are used. In order to predict these diagrams, frequency response functions (FRF) at the tool tip are required for every tool, holder and machine combination. To reduce the number of experimental tests, receptance coupling substructure analysis (RSCA) is proposed in the literature. In order to take full advantage of this method, contact parameters between holder and tool must be known. To identify these parameters this paper presents a new method based on free-free measurements. The obtained contact parameters led to good results for various tool lengths. Based on this, an extensive investigation is performed for the ER32 holder interface. Afterwards, the RCSA method is tested. Therefore, different spindle–holder–tool assemblies are modeled for two machine tools. Prediction and measurement of obtained tool-tip FRF shows a good match, especially for the frequency position.
ISSN:1755-5817
1878-0016
DOI:10.1016/j.cirpj.2016.02.005