Multi-objective optimization of reliability-redundancy allocation problem for multi-type production systems considering redundancy strategies

•A new model of multi-type production systems that generalizes the manufacturing systems with multiple switchable production lines is developed.•A binary matrix is used to describe the composition of each production line of the multi-type production system.•RRAP considering redundancy strategies (ei...

Celý popis

Uloženo v:
Podrobná bibliografie
Vydáno v:Reliability engineering & system safety Ročník 193; s. 106681
Hlavní autoři: Wang, Wei, Lin, Mingqiang, Fu, Yongnian, Luo, Xiaoping, Chen, Hanghang
Médium: Journal Article
Jazyk:angličtina
Vydáno: Barking Elsevier Ltd 01.01.2020
Elsevier BV
Témata:
ISSN:0951-8320, 1879-0836
On-line přístup:Získat plný text
Tagy: Přidat tag
Žádné tagy, Buďte první, kdo vytvoří štítek k tomuto záznamu!
Abstract •A new model of multi-type production systems that generalizes the manufacturing systems with multiple switchable production lines is developed.•A binary matrix is used to describe the composition of each production line of the multi-type production system.•RRAP considering redundancy strategies (either active or cold standby) is modeled for enhancing the reliabilities of different production lines.•A NSGA-II is developed to solve the RRAP for the multi-type production system. This paper innovatively proposes a new model of multi-type production system which can process different types of production. The multi-type production system consists of several independent sequentially ordered subsystems which undertaking different tasks. Different types of production require different manufacturing lines: required subsystems will be powered on, while others powered off. The system can switch into different production line based on detection results. A binary matrix is suggested to describe the composition of each production line of the multi-type production system. Reliability-redundancy allocation on each subsystem is considered for achieving higher reliabilities of different production lines. The reliability-redundancy allocation problem for the proposed multi-type production system is essentially multi-objective subject to resource constraints. This paper formulates the multi-objective optimization problem and considers the optimal redundancy strategy, either active or cold standby. The exact reliabilities of cold standby redundant subsystems with imperfect detector/switch are determined by introducing an approach based on continuous time Markov chain. Then, a multi-objective evolutionary algorithm is suggested to solve the proposed reliability-redundancy allocation problem. Finally, numerical examples are presented to illustrate the proposed methods.
AbstractList •A new model of multi-type production systems that generalizes the manufacturing systems with multiple switchable production lines is developed.•A binary matrix is used to describe the composition of each production line of the multi-type production system.•RRAP considering redundancy strategies (either active or cold standby) is modeled for enhancing the reliabilities of different production lines.•A NSGA-II is developed to solve the RRAP for the multi-type production system. This paper innovatively proposes a new model of multi-type production system which can process different types of production. The multi-type production system consists of several independent sequentially ordered subsystems which undertaking different tasks. Different types of production require different manufacturing lines: required subsystems will be powered on, while others powered off. The system can switch into different production line based on detection results. A binary matrix is suggested to describe the composition of each production line of the multi-type production system. Reliability-redundancy allocation on each subsystem is considered for achieving higher reliabilities of different production lines. The reliability-redundancy allocation problem for the proposed multi-type production system is essentially multi-objective subject to resource constraints. This paper formulates the multi-objective optimization problem and considers the optimal redundancy strategy, either active or cold standby. The exact reliabilities of cold standby redundant subsystems with imperfect detector/switch are determined by introducing an approach based on continuous time Markov chain. Then, a multi-objective evolutionary algorithm is suggested to solve the proposed reliability-redundancy allocation problem. Finally, numerical examples are presented to illustrate the proposed methods.
This paper innovatively proposes a new model of multi-type production system which can process different types of production. The multi-type production system consists of several independent sequentially ordered subsystems which undertaking different tasks. Different types of production require different manufacturing lines: required subsystems will be powered on, while others powered off. The system can switch into different production line based on detection results. A binary matrix is suggested to describe the composition of each production line of the multi-type production system. Reliability-redundancy allocation on each subsystem is considered for achieving higher reliabilities of different production lines. The reliability-redundancy allocation problem for the proposed multi-type production system is essentially multi-objective subject to resource constraints. This paper formulates the multi-objective optimization problem and considers the optimal redundancy strategy, either active or cold standby. The exact reliabilities of cold standby redundant subsystems with imperfect detector/switch are determined by introducing an approach based on continuous time Markov chain. Then, a multi-objective evolutionary algorithm is suggested to solve the proposed reliability-redundancy allocation problem. Finally, numerical examples are presented to illustrate the proposed methods.
ArticleNumber 106681
Author Luo, Xiaoping
Lin, Mingqiang
Wang, Wei
Fu, Yongnian
Chen, Hanghang
Author_xml – sequence: 1
  givenname: Wei
  surname: Wang
  fullname: Wang, Wei
  email: wwwayne@mail.ustc.edu.cn
  organization: Northwest Institute of Mechanical and Electrical Engineering, Xianyang 712000, PR China
– sequence: 2
  givenname: Mingqiang
  surname: Lin
  fullname: Lin, Mingqiang
  email: kdlmq@fjirsm.ac.cn
  organization: Quanzhou Institute of Equipment Manufacturing, Haixi Institutes, Chinese Academy of Sciences, Jinjiang 362200, PR China
– sequence: 3
  givenname: Yongnian
  surname: Fu
  fullname: Fu, Yongnian
  organization: Northwest Institute of Mechanical and Electrical Engineering, Xianyang 712000, PR China
– sequence: 4
  givenname: Xiaoping
  surname: Luo
  fullname: Luo, Xiaoping
  organization: Northwest Institute of Mechanical and Electrical Engineering, Xianyang 712000, PR China
– sequence: 5
  givenname: Hanghang
  surname: Chen
  fullname: Chen, Hanghang
  organization: Northwest Institute of Mechanical and Electrical Engineering, Xianyang 712000, PR China
BookMark eNp9kc1q3DAURkVJIJM0L5CVoWtPr6SRJUM2JfQPUrpp10KWroOMLU0lOeC-Q9-5nnEWpYusBJfvfNI9uiYXIQYk5I7CngJt3g_7hDnvGdB2HTSNom_IjirZ1qB4c0F20ApaK87gilznPADAoRVyR_58m8fi69gNaIt_xioei5_8b1N8DFXsq4SjN50ffVnqhG4OzgS7VGYco91CxxS7Eaeqj6mazm1lOeJp7GZ7TuQlF5xyZWPI3mHy4an6pyuXZAo-ecxvyWVvxoy3L-cN-fnp44-HL_Xj989fHz481pYzVWrkoBoHB0uF6WWDUvbQgwNHLUijugaVZIy3B4ROYCsEE5T3Fo0RRtiu5Tfk3da7PvLXjLnoIc4prFdqxjkAY1LCmmJbyqaYc8JeH5OfTFo0BX3Srgd90q5P2vWmfYXUf5D15Sxq3dKPr6P3G4rr6s8ek87WY7DofFp_R7voX8P_AsvWpVs
CitedBy_id crossref_primary_10_1016_j_ejor_2021_04_053
crossref_primary_10_1155_2021_7833641
crossref_primary_10_1002_qre_3732
crossref_primary_10_1016_j_ress_2023_109807
crossref_primary_10_1016_j_ress_2021_108277
crossref_primary_10_1109_TR_2023_3336351
crossref_primary_10_1016_j_ress_2022_108795
crossref_primary_10_1007_s12597_023_00635_2
crossref_primary_10_1016_j_ress_2020_107268
crossref_primary_10_1007_s10479_025_06819_x
crossref_primary_10_1007_s11334_024_00588_9
crossref_primary_10_1016_j_ress_2025_110922
crossref_primary_10_1016_j_ress_2022_108394
crossref_primary_10_1016_j_eswa_2022_117161
crossref_primary_10_1007_s11334_023_00539_w
crossref_primary_10_1016_j_ress_2021_108167
crossref_primary_10_1016_j_cie_2020_106879
crossref_primary_10_1007_s40819_023_01604_5
crossref_primary_10_1016_j_ress_2020_107290
crossref_primary_10_1080_24725854_2020_1836434
crossref_primary_10_33889_IJMEMS_2023_8_4_043
crossref_primary_10_1016_j_ress_2023_109297
crossref_primary_10_1016_j_asoc_2021_107321
crossref_primary_10_1016_j_eswa_2024_124841
crossref_primary_10_1016_j_ress_2025_111279
crossref_primary_10_1007_s10462_022_10363_6
crossref_primary_10_1155_2021_7709788
crossref_primary_10_1007_s00170_021_07843_4
crossref_primary_10_1007_s00521_022_07459_z
crossref_primary_10_1142_S0218539325500147
crossref_primary_10_1016_j_ress_2022_108734
crossref_primary_10_1016_j_chaos_2022_113081
crossref_primary_10_1002_eng2_12221
crossref_primary_10_1016_j_ress_2022_108576
crossref_primary_10_1109_ACCESS_2020_3018860
crossref_primary_10_1007_s00170_024_13223_5
crossref_primary_10_1016_j_ress_2022_108970
crossref_primary_10_1016_j_ress_2024_110700
crossref_primary_10_1016_j_cie_2022_108022
crossref_primary_10_1007_s12597_022_00578_0
crossref_primary_10_3390_math11163534
crossref_primary_10_1016_j_ress_2021_108190
crossref_primary_10_3390_en14133956
crossref_primary_10_1016_j_ress_2022_108529
crossref_primary_10_1016_j_rser_2024_114613
crossref_primary_10_1016_j_ress_2023_109835
crossref_primary_10_1016_j_ress_2021_107694
crossref_primary_10_1177_1748006X231164848
crossref_primary_10_1016_j_ress_2022_108604
crossref_primary_10_1177_1748006X211028699
crossref_primary_10_1016_j_ress_2022_108564
crossref_primary_10_1016_j_ress_2022_108567
crossref_primary_10_1109_TR_2020_2974284
crossref_primary_10_1007_s13198_024_02457_x
crossref_primary_10_1109_ACCESS_2023_3280448
crossref_primary_10_1016_j_ress_2023_109471
crossref_primary_10_1007_s13198_022_01659_5
Cites_doi 10.1016/j.ress.2018.11.008
10.1016/j.swevo.2015.05.001
10.1016/j.ress.2017.12.019
10.1016/j.cie.2012.09.015
10.1162/evco.1994.2.3.221
10.1109/4235.996017
10.1016/j.ress.2017.07.004
10.1080/0740817X.2016.1189631
10.1109/TSMCA.2006.889476
10.1016/j.ress.2018.09.005
10.1016/j.autcon.2018.08.002
10.1016/j.eswa.2018.06.056
10.1016/j.simpat.2013.12.013
10.1631/jzus.2005.A0420
10.1016/j.ress.2017.03.009
10.1016/j.ress.2015.06.002
10.1080/07408170108936846
10.1016/S0142-0615(02)00027-3
10.1109/TEVC.2007.892759
10.1016/j.ress.2007.02.009
10.1177/0954410014560381
10.1016/j.jmsy.2014.02.008
10.1016/j.ress.2016.10.033
10.1016/j.ins.2018.11.041
10.1016/S0925-5273(00)00058-X
10.1109/24.877336
10.1016/j.cie.2012.06.023
10.1016/j.cie.2012.02.004
10.1016/j.ress.2015.09.008
10.1016/j.ijpe.2006.05.012
10.1016/j.ress.2014.06.001
10.1109/TSMC.2016.2633808
10.1016/j.ress.2018.11.006
10.1007/s10845-012-0650-9
10.1016/j.ress.2015.07.019
10.1016/j.eswa.2013.11.014
10.1016/j.ress.2011.09.009
10.1016/j.autcon.2016.08.021
10.1109/TR.2012.2220898
10.1016/j.swevo.2017.06.002
10.1016/j.cor.2013.07.014
10.1016/j.ins.2014.11.036
10.1016/j.ress.2016.10.019
10.1080/0305215X.2017.1337755
10.1007/s41066-018-0106-5
10.1109/4235.797969
10.1016/j.isatra.2014.10.002
10.1049/iet-gtd:20070457
10.1080/03081079.2015.1028541
10.1016/j.ress.2013.05.016
10.1162/106365600568167
10.1080/07408170304420
ContentType Journal Article
Copyright 2019 Elsevier Ltd
Copyright Elsevier BV Jan 2020
Copyright_xml – notice: 2019 Elsevier Ltd
– notice: Copyright Elsevier BV Jan 2020
DBID AAYXX
CITATION
7ST
7TB
8FD
C1K
FR3
SOI
DOI 10.1016/j.ress.2019.106681
DatabaseName CrossRef
Environment Abstracts
Mechanical & Transportation Engineering Abstracts
Technology Research Database
Environmental Sciences and Pollution Management
Engineering Research Database
Environment Abstracts
DatabaseTitle CrossRef
Engineering Research Database
Technology Research Database
Mechanical & Transportation Engineering Abstracts
Environment Abstracts
Environmental Sciences and Pollution Management
DatabaseTitleList
Engineering Research Database
DeliveryMethod fulltext_linktorsrc
Discipline Engineering
EISSN 1879-0836
ExternalDocumentID 10_1016_j_ress_2019_106681
S095183201930287X
GroupedDBID --K
--M
.~1
0R~
123
1B1
1~.
1~5
29P
4.4
457
4G.
5VS
7-5
71M
8P~
9JN
9JO
AABNK
AACTN
AAEDT
AAEDW
AAFJI
AAIAV
AAIKJ
AAKOC
AALRI
AAOAW
AAQFI
AAQXK
AAXUO
ABEFU
ABFNM
ABJNI
ABMAC
ABMMH
ABTAH
ABXDB
ABYKQ
ACDAQ
ACGFS
ACIWK
ACNNM
ACRLP
ADBBV
ADEZE
ADMUD
ADTZH
AEBSH
AECPX
AEKER
AENEX
AFKWA
AFRAH
AFTJW
AGHFR
AGUBO
AGYEJ
AHHHB
AHJVU
AIEXJ
AIKHN
AITUG
AJBFU
AJOXV
AKYCK
ALMA_UNASSIGNED_HOLDINGS
AMFUW
AMRAJ
AOMHK
ASPBG
AVARZ
AVWKF
AXJTR
AZFZN
BJAXD
BKOJK
BLXMC
CS3
DU5
EBS
EFJIC
EFLBG
EJD
EO8
EO9
EP2
EP3
FDB
FEDTE
FGOYB
FIRID
FNPLU
FYGXN
G-2
G-Q
GBLVA
HVGLF
HZ~
IHE
J1W
JJJVA
KOM
LY7
M41
MO0
N9A
O-L
O9-
OAUVE
OZT
P-8
P-9
P2P
PC.
PRBVW
Q38
R2-
RIG
ROL
RPZ
SDF
SDG
SES
SET
SEW
SPC
SPCBC
SSB
SSO
SST
SSZ
T5K
TN5
WUQ
XPP
ZMT
ZY4
~G-
9DU
AATTM
AAXKI
AAYWO
AAYXX
ABWVN
ACLOT
ACRPL
ACVFH
ADCNI
ADNMO
AEIPS
AEUPX
AFJKZ
AFPUW
AGQPQ
AIGII
AIIUN
AKBMS
AKRWK
AKYEP
ANKPU
APXCP
CITATION
EFKBS
~HD
7ST
7TB
8FD
AGCQF
C1K
FR3
SOI
ID FETCH-LOGICAL-c328t-e3086d04c15af76e77f0f0d0d1c07a8b6e8722394e0b5e9552513fceaa5a5cb93
ISICitedReferencesCount 56
ISICitedReferencesURI http://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=Summon&SrcAuth=ProQuest&DestLinkType=CitingArticles&DestApp=WOS_CPL&KeyUT=000501641400072&url=https%3A%2F%2Fcvtisr.summon.serialssolutions.com%2F%23%21%2Fsearch%3Fho%3Df%26include.ft.matches%3Dt%26l%3Dnull%26q%3D
ISSN 0951-8320
IngestDate Wed Aug 13 10:34:44 EDT 2025
Sat Nov 29 07:10:07 EST 2025
Tue Nov 18 21:51:37 EST 2025
Fri Feb 23 02:49:26 EST 2024
IsPeerReviewed true
IsScholarly true
Keywords Structure matrix
NSGA-II
Multi-objective optimization
Multi-type production system
Redundancy strategy
Reliability-redundancy allocation
Language English
LinkModel OpenURL
MergedId FETCHMERGED-LOGICAL-c328t-e3086d04c15af76e77f0f0d0d1c07a8b6e8722394e0b5e9552513fceaa5a5cb93
Notes ObjectType-Article-1
SourceType-Scholarly Journals-1
ObjectType-Feature-2
content type line 14
PQID 2330022770
PQPubID 2045406
ParticipantIDs proquest_journals_2330022770
crossref_primary_10_1016_j_ress_2019_106681
crossref_citationtrail_10_1016_j_ress_2019_106681
elsevier_sciencedirect_doi_10_1016_j_ress_2019_106681
PublicationCentury 2000
PublicationDate January 2020
2020-01-00
20200101
PublicationDateYYYYMMDD 2020-01-01
PublicationDate_xml – month: 01
  year: 2020
  text: January 2020
PublicationDecade 2020
PublicationPlace Barking
PublicationPlace_xml – name: Barking
PublicationTitle Reliability engineering & system safety
PublicationYear 2020
Publisher Elsevier Ltd
Elsevier BV
Publisher_xml – name: Elsevier Ltd
– name: Elsevier BV
References Wang, Xiong, Xie (bib0030) 2015; 44
Ghavidel, Azizivahed, Li (bib0020) 2018; 50
Ardakan, Rezvan (bib0022) 2018; 172
Coit (bib0032) 2003; 35
Ardakan, Hamadani, Alinaghian (bib0025) 2015; 55
Zhao, Cao (bib0045) 2005; 6
Kim (bib0018) 2017; 167
Chambari, Najafi, Rahmati, Karimi (bib0035) 2013; 119
Deb, Pratap, Agarwal, Meyarivan (bib0043) 2002; 6
Lin, Chang (bib0001) 2013; 62
Garg, Rani, Sharma, Vishwakarma (bib0057) 2014; 41
Muhuri, Ashraf, Lohani (bib0021) 2018; 26
Levitin, Xing, Luo (bib0053) 2019; 183
Kim, Kim (bib0017) 2017; 159
Yeh (bib0023) 2018
Ashraf, Muhuri, Lohani, Roy (bib0058) 2019; 4
Zhang, Li (bib0046) 2007; 11
Konak, Kulturel-Konak, Levitin (bib0051) 2012; 98
Zitzler, Thiele (bib0038) 1999; 3
Kong, Gao, Ouyang, Li (bib0036) 2015; 144
Gholinezhad, Hamadani (bib0027) 2017; 164
Corne, Knowles, Oates (bib0041) 2000
Corne, Jerram, Knowles, Oates (bib0042) 2001
Zhang, Chen (bib0059) 2016; 145
Ardakan, Sima, Hamadani, Coit (bib0019) 2016; 48
Abido (bib0044) 2003; 25
Garg, Rani, Sharma, Vishwakarma (bib0012) 2014; 33
Lin, Chang (bib0004) 2012; 63
Tavakkoli-Moghaddam, Safari, Sassani (bib0033) 2008; 93
Srinivas, Deb (bib0037) 2014; 2
Huang (bib0013) 2015; 142
Kuo, Prasad (bib0008) 2000; 49
Chen, Lan (bib0002) 2001; 70
Ma, Yang, Liu, Wu (bib0006) 2018; 95
Ouyang, Liu, Ruan, Jiang (bib0026) 2019; 181
Levitin, Xing, Dai (bib0054) 2016; 48
Kim (bib0055) 2018; 113
Kim, Kim (bib0056) 2017; 159
Lan (bib0003) 2007; 106
Coit (bib0031) 2001; 33
Wang, Ma, Wang (bib0049) 2008; 44
Raouf, Pourtakdoust (bib0014) 2015; 229
Garg (bib0060) 2016; 274
Garg (bib0016) 2015; 24
Garg, Rani, Sharma (bib0011) 2013; 40
Peiravi, Karbasian, Abouei Ardakan (bib0028) 2018; 232
Kuo, Wan (bib0009) 2007; 37
Ventura, Yoon (bib0050) 2013; 24
Ardakan, Hamadani (bib0024) 2014; 130
Peiravi, Karbasian, Ardakan, Coit (bib0029) 2019; 183
Garg, Kumar, Pahuja (bib0007) 2010; 2
Qu, Zhu, Jiao, Wu, Suganthan, Liang (bib0062) 2018; 38
Knowles, Corne (bib0040) 2014; 8
Ardakan, Hamadani (bib0010) 2014; 42
Yang, Ma, Wu (bib0005) 2016; 72
Garg, Sharma (bib0052) 2013; 64
Varadarajan, Swarup (bib0047) 2008; 2
Shen, Yao (bib0048) 2015; 298
Garg (bib0061) 2019; 478
Chambari, Rahmati, Najafi (bib0034) 2012; 63
Zitzler, Laummans, Thiele (bib0039) 2001
Garg (bib0015) 2015; 4
Peiravi (10.1016/j.ress.2019.106681_bib0028) 2018; 232
Kuo (10.1016/j.ress.2019.106681_bib0009) 2007; 37
Zhang (10.1016/j.ress.2019.106681_bib0046) 2007; 11
Ma (10.1016/j.ress.2019.106681_bib0006) 2018; 95
Lin (10.1016/j.ress.2019.106681_bib0004) 2012; 63
Ardakan (10.1016/j.ress.2019.106681_bib0022) 2018; 172
Gholinezhad (10.1016/j.ress.2019.106681_bib0027) 2017; 164
Peiravi (10.1016/j.ress.2019.106681_bib0029) 2019; 183
Zhang (10.1016/j.ress.2019.106681_bib0059) 2016; 145
Ardakan (10.1016/j.ress.2019.106681_bib0019) 2016; 48
Garg (10.1016/j.ress.2019.106681_bib0012) 2014; 33
Chen (10.1016/j.ress.2019.106681_bib0002) 2001; 70
Varadarajan (10.1016/j.ress.2019.106681_bib0047) 2008; 2
Chambari (10.1016/j.ress.2019.106681_bib0035) 2013; 119
Ashraf (10.1016/j.ress.2019.106681_bib0058) 2019; 4
Zitzler (10.1016/j.ress.2019.106681_bib0039) 2001
Kuo (10.1016/j.ress.2019.106681_bib0008) 2000; 49
Ardakan (10.1016/j.ress.2019.106681_bib0010) 2014; 42
Coit (10.1016/j.ress.2019.106681_bib0032) 2003; 35
Ventura (10.1016/j.ress.2019.106681_bib0050) 2013; 24
Lin (10.1016/j.ress.2019.106681_bib0001) 2013; 62
Muhuri (10.1016/j.ress.2019.106681_bib0021) 2018; 26
Ghavidel (10.1016/j.ress.2019.106681_bib0020) 2018; 50
Kim (10.1016/j.ress.2019.106681_bib0018) 2017; 167
Garg (10.1016/j.ress.2019.106681_bib0057) 2014; 41
Raouf (10.1016/j.ress.2019.106681_bib0014) 2015; 229
Ardakan (10.1016/j.ress.2019.106681_bib0025) 2015; 55
Kim (10.1016/j.ress.2019.106681_bib0055) 2018; 113
Yeh (10.1016/j.ress.2019.106681_bib0023) 2018
Garg (10.1016/j.ress.2019.106681_bib0015) 2015; 4
Ouyang (10.1016/j.ress.2019.106681_bib0026) 2019; 181
Levitin (10.1016/j.ress.2019.106681_bib0054) 2016; 48
Wang (10.1016/j.ress.2019.106681_bib0049) 2008; 44
Corne (10.1016/j.ress.2019.106681_bib0041) 2000
Abido (10.1016/j.ress.2019.106681_bib0044) 2003; 25
Konak (10.1016/j.ress.2019.106681_bib0051) 2012; 98
Knowles (10.1016/j.ress.2019.106681_bib0040) 2014; 8
Garg (10.1016/j.ress.2019.106681_bib0052) 2013; 64
Zhao (10.1016/j.ress.2019.106681_bib0045) 2005; 6
Lan (10.1016/j.ress.2019.106681_bib0003) 2007; 106
Deb (10.1016/j.ress.2019.106681_bib0043) 2002; 6
Levitin (10.1016/j.ress.2019.106681_bib0053) 2019; 183
Huang (10.1016/j.ress.2019.106681_bib0013) 2015; 142
Garg (10.1016/j.ress.2019.106681_bib0061) 2019; 478
Qu (10.1016/j.ress.2019.106681_bib0062) 2018; 38
Garg (10.1016/j.ress.2019.106681_bib0016) 2015; 24
Shen (10.1016/j.ress.2019.106681_bib0048) 2015; 298
Garg (10.1016/j.ress.2019.106681_bib0011) 2013; 40
Corne (10.1016/j.ress.2019.106681_bib0042) 2001
Zitzler (10.1016/j.ress.2019.106681_bib0038) 1999; 3
Garg (10.1016/j.ress.2019.106681_bib0007) 2010; 2
Kong (10.1016/j.ress.2019.106681_bib0036) 2015; 144
Chambari (10.1016/j.ress.2019.106681_bib0034) 2012; 63
Coit (10.1016/j.ress.2019.106681_bib0031) 2001; 33
Srinivas (10.1016/j.ress.2019.106681_bib0037) 2014; 2
Garg (10.1016/j.ress.2019.106681_bib0060) 2016; 274
Kim (10.1016/j.ress.2019.106681_bib0056) 2017; 159
Yang (10.1016/j.ress.2019.106681_bib0005) 2016; 72
Kim (10.1016/j.ress.2019.106681_bib0017) 2017; 159
Tavakkoli-Moghaddam (10.1016/j.ress.2019.106681_bib0033) 2008; 93
Ardakan (10.1016/j.ress.2019.106681_bib0024) 2014; 130
Wang (10.1016/j.ress.2019.106681_bib0030) 2015; 44
References_xml – volume: 24
  start-page: 1185
  year: 2013
  end-page: 1196
  ident: bib0050
  article-title: A new genetic algorithm for lot-streaming flow shop scheduling with limited capacity buffers
  publication-title: J Intell Manuf
– volume: 4
  start-page: 145
  year: 2019
  end-page: 166
  ident: bib0058
  article-title: Type-2 fuzzy reliability–redundancy allocation problem and its solution using particle-swarm optimization algorithm
  publication-title: Granul Comput
– volume: 478
  start-page: 499
  year: 2019
  end-page: 523
  ident: bib0061
  article-title: A hybrid GSA-GA algorithm for constrained optimization problems
  publication-title: Inf Sci
– volume: 6
  start-page: 420
  year: 2005
  end-page: 427
  ident: bib0045
  article-title: Multiple objective particle swarm optimization technique for economic load dispatch
  publication-title: J Zhejiang Univ-Sci A
– volume: 44
  start-page: 57
  year: 2008
  end-page: 59
  ident: bib0049
  article-title: Study of improved genetic algorithm based on dual mutation and its simulation
  publication-title: Comput Eng Appl
– volume: 44
  start-page: 876
  year: 2015
  end-page: 888
  ident: bib0030
  article-title: Cold-standby redundancy allocation problem with degrading components
  publication-title: Int J Gen Syst
– volume: 42
  start-page: 107
  year: 2014
  end-page: 118
  ident: bib0010
  article-title: Reliability–redundancy allocation problem with cold-standby redundancy strategy
  publication-title: Simul Model Pract Theory
– volume: 167
  start-page: 572
  year: 2017
  end-page: 582
  ident: bib0018
  article-title: Optimal reliability design of a system with k-out-of-n subsystems considering redundancy strategies
  publication-title: Reliab Eng Syst Saf
– volume: 4
  start-page: 14
  year: 2015
  end-page: 25
  ident: bib0015
  article-title: An approach for solving constrained reliability-redundancy allocation problems using cuckoo search algorithm
  publication-title: Beni-Suef Univ J Basic Appl Sci
– volume: 72
  start-page: 321
  year: 2016
  end-page: 329
  ident: bib0005
  article-title: Optimized flowshop scheduling of multiple production lines for precast production
  publication-title: Autom Constr
– volume: 26
  start-page: 1339
  year: 2018
  end-page: 1355
  ident: bib0021
  article-title: Multiobjective reliability redundancy allocation problem with interval type-2 fuzzy uncertainty
  publication-title: IEEE Trans Fuzzy Syst
– start-page: 839
  year: 2000
  end-page: 848
  ident: bib0041
  article-title: The Pareto envelope-based selection algorithm for multi-objective optimization
  publication-title: International conference on parallel problem solving from nature
– volume: 93
  start-page: 550
  year: 2008
  end-page: 556
  ident: bib0033
  article-title: Reliability optimization of series-parallel systems with a choice of redundancy strategies using a genetic algorithm
  publication-title: Reliab Eng Syst Saf
– volume: 40
  start-page: 2961
  year: 2013
  end-page: 2969
  ident: bib0011
  article-title: An efficient two phase approach for solving reliability–redundancy allocation problem using artificial bee colony technique
  publication-title: Comput Oper Res
– volume: 159
  start-page: 37
  year: 2017
  end-page: 46
  ident: bib0056
  article-title: Reliability models for a nonrepairable system with heterogeneous components having a phase-type time-to-failure distribution
  publication-title: Reliab Eng Syst Saf
– volume: 106
  start-page: 191
  year: 2007
  end-page: 203
  ident: bib0003
  article-title: The design of multiple production lines under deadline constraint
  publication-title: Int J Prod Econ
– volume: 70
  start-page: 175
  year: 2001
  end-page: 184
  ident: bib0002
  article-title: The maximal profit flow model in designing multiple-production-line system with obtainable resource capacity
  publication-title: Int J Prod Econ
– volume: 63
  start-page: 109
  year: 2012
  end-page: 119
  ident: bib0034
  article-title: A bi-objective model to optimize reliability and cost of system with a choice of redundancy strategies
  publication-title: Comput Ind Eng
– volume: 145
  start-page: 83
  year: 2016
  end-page: 92
  ident: bib0059
  article-title: Multi-objective reliability redundancy allocation in an interval environment using particle swarm optimization
  publication-title: Reliab Eng Syst Saf
– volume: 144
  start-page: 147
  year: 2015
  end-page: 158
  ident: bib0036
  article-title: Solving the redundancy allocation problem with multiple strategy choices using a new simplified particle swarm optimization
  publication-title: Reliab Eng Syst Saf
– volume: 48
  start-page: 920
  year: 2016
  end-page: 929
  ident: bib0054
  article-title: Optimizing dynamic performance of multistate systems with heterogeneous 1-out-of-N warm standby components
  publication-title: IEEE Trans Syst Man Cybern
– volume: 37
  start-page: 143
  year: 2007
  end-page: 156
  ident: bib0009
  article-title: Recent advances in optimal reliability allocation
  publication-title: IEEE Trans Syst Man Cybern-Part A
– volume: 33
  start-page: 471
  year: 2001
  end-page: 478
  ident: bib0031
  article-title: Cold-standby redundancy optimization for nonrepairable systems
  publication-title: IIE Trans
– volume: 274
  start-page: 292
  year: 2016
  end-page: 305
  ident: bib0060
  article-title: A hybrid pso-ga algorithm for constrained optimization problems
  publication-title: Appl Math Comput
– volume: 2
  start-page: 720
  year: 2008
  end-page: 730
  ident: bib0047
  article-title: Solving multi-objective optimal power flow using differential evolution
  publication-title: IET Gener Transm Distrib
– volume: 41
  start-page: 3157
  year: 2014
  end-page: 3167
  ident: bib0057
  article-title: Intuitionistic fuzzy optimization technique for solving multi-objective reliability optimization problems in interval environment
  publication-title: Expert Syst Appl
– volume: 24
  start-page: 1
  year: 2015
  end-page: 10
  ident: bib0016
  article-title: An efficient biogeography based optimization algorithm for solving reliability optimization problems
  publication-title: Swarm Evolut Comput
– volume: 38
  start-page: 1
  year: 2018
  end-page: 11
  ident: bib0062
  article-title: A survey on multi-objective evolutionary algorithms for the solution of the environmental/economic dispatch problems
  publication-title: Swarm Evolut Comput
– volume: 172
  start-page: 225
  year: 2018
  end-page: 238
  ident: bib0022
  article-title: Multi-objective optimization of reliability–redundancy allocation problem with cold-standby strategy using NSGA-II
  publication-title: Reliab Eng Syst Saf
– volume: 95
  start-page: 86
  year: 2018
  end-page: 97
  ident: bib0006
  article-title: Optimized rescheduling of multiple production lines for flowshop production of reinforced precast concrete components
  publication-title: Autom Constr
– volume: 159
  start-page: 153
  year: 2017
  end-page: 160
  ident: bib0017
  article-title: Reliability–redundancy allocation problem considering optimal redundancy strategy using parallel genetic algorithm
  publication-title: Reliab Eng Syst Saf
– volume: 48
  start-page: 1043
  year: 2016
  end-page: 1057
  ident: bib0019
  article-title: A novel strategy for redundant components in reliability-redundancy allocation problems
  publication-title: IIE Trans
– volume: 3
  start-page: 257
  year: 1999
  end-page: 271
  ident: bib0038
  article-title: Multiobjective evolutionary algorithms: a comparative case study and the strength pareto approach
  publication-title: IEEE Trans Evolut Comput
– year: 2001
  ident: bib0039
  article-title: SPEA2
– volume: 62
  start-page: 92
  year: 2013
  end-page: 104
  ident: bib0001
  article-title: A novel reliability evaluation technique for stochastic-flow manufacturing networks with multiple production lines
  publication-title: IEEE Trans Reliab
– volume: 232
  start-page: 38
  year: 2018
  end-page: 51
  ident: bib0028
  article-title: K-mixed strategy: a new redundancy strategy for reliability problems
  publication-title: Proc Inst Mech Eng Part O
– year: 2018
  ident: bib0023
  article-title: A novel boundary swarm optimization method for reliability redundancy allocation problems
  publication-title: Reliab Eng Syst Saf
– volume: 8
  start-page: 149
  year: 2014
  end-page: 172
  ident: bib0040
  article-title: Approximating the nondominated front using the pareto archived evolution strategy
  publication-title: Evolut Comput
– volume: 164
  start-page: 66
  year: 2017
  end-page: 73
  ident: bib0027
  article-title: A new model for the redundancy allocation problem with component mixing and mixed redundancy strategy
  publication-title: Reliab Eng Syst Saf
– volume: 35
  start-page: 535
  year: 2003
  end-page: 543
  ident: bib0032
  article-title: Maximization of system reliability with a choice of redundancy strategies
  publication-title: IIE Trans
– volume: 6
  start-page: 182
  year: 2002
  end-page: 197
  ident: bib0043
  article-title: A fast and elitist multi-objective genetic algorithm: NSGA-II
  publication-title: IEEE Trans Evolut Comput
– volume: 2
  start-page: 1088
  year: 2010
  end-page: 1097
  ident: bib0007
  article-title: Redundancy-allocation in pharmaceutical plant
  publication-title: Int J Eng Sci
– volume: 11
  start-page: 712
  year: 2007
  end-page: 731
  ident: bib0046
  article-title: MOEA/D: a multiobjective evolutionary algorithm based on decomposition
  publication-title: IEEE Trans Evolut Comput
– volume: 113
  start-page: 328
  year: 2018
  end-page: 338
  ident: bib0055
  article-title: Parallel genetic algorithm with a knowledge base for a redundancy allocation problem considering the sequence of heterogeneous components
  publication-title: Expert Syst Appl
– volume: 64
  start-page: 247
  year: 2013
  end-page: 255
  ident: bib0052
  article-title: Multi-objective reliability-redundancy allocation problem using particle swarm optimization
  publication-title: Comput Ind Eng
– volume: 119
  start-page: 158
  year: 2013
  end-page: 164
  ident: bib0035
  article-title: An efficient simulated annealing algorithm for the redundancy allocation problem with a choice of redundancy strategies
  publication-title: Reliab Eng Syst Saf
– volume: 49
  start-page: 176
  year: 2000
  end-page: 187
  ident: bib0008
  article-title: An annotated overview of system-reliability optimization
  publication-title: IEEE Trans Reliab
– volume: 142
  start-page: 221
  year: 2015
  end-page: 230
  ident: bib0013
  article-title: A particle-based simplified swarm optimization algorithm for reliability redundancy allocation problems
  publication-title: Reliab Eng Syst Saf
– volume: 229
  start-page: 1785
  year: 2015
  end-page: 1797
  ident: bib0014
  article-title: Launch vehicle multi-objective reliability-redundancy optimization using a hybrid genetic algorithm-particle swarm optimization
  publication-title: Proc Inst Mech Eng Part G
– volume: 98
  start-page: 24
  year: 2012
  end-page: 34
  ident: bib0051
  article-title: Multi-objective optimization of linear multi-state multiple sliding window system
  publication-title: Reliab Eng Syst Saf
– volume: 183
  start-page: 29
  year: 2019
  end-page: 38
  ident: bib0053
  article-title: Influence of failure propagation on mission abort policy in heterogeneous warm standby systems
  publication-title: Reliab Eng Syst Saf
– volume: 181
  start-page: 62
  year: 2019
  end-page: 74
  ident: bib0026
  article-title: An improved particle swarm optimization algorithm for reliability-redundancy allocation problem with mixed redundancy strategy and heterogeneous components
  publication-title: Reliab Eng Syst Saf
– volume: 2
  start-page: 221
  year: 2014
  end-page: 248
  ident: bib0037
  article-title: Muiltiobjective optimization using nondominated sorting in genetic algorithms
  publication-title: Evolut Comput
– volume: 25
  start-page: 97
  year: 2003
  end-page: 105
  ident: bib0044
  article-title: A niched Pareto genetic algorithm for multiobjective environmental/economic dispatch
  publication-title: Int J Electr Power Energy Syst
– volume: 183
  start-page: 17
  year: 2019
  end-page: 28
  ident: bib0029
  article-title: Reliability optimization of series-parallel systems with K-mixed redundancy strategy
  publication-title: Reliab Eng Syst Saf
– volume: 63
  start-page: 1209
  year: 2012
  end-page: 1219
  ident: bib0004
  article-title: Reliability evaluation for a manufacturing network with multiple production lines
  publication-title: Comput Ind Eng
– volume: 50
  start-page: 698
  year: 2018
  end-page: 715
  ident: bib0020
  article-title: A hybrid Jaya algorithm for reliability–redundancy allocation problems
  publication-title: Eng Optim
– volume: 33
  start-page: 335
  year: 2014
  end-page: 347
  ident: bib0012
  article-title: Bi-objective optimization of the reliability-redundancy allocation problem for series-parallel system
  publication-title: J Manuf Syst
– start-page: 283
  year: 2001
  end-page: 290
  ident: bib0042
  article-title: PESA-II: region-based selection in evolutionary multi-objective optimization
  publication-title: Conference on genetic and evolutionary computation
– volume: 130
  start-page: 132
  year: 2014
  end-page: 139
  ident: bib0024
  article-title: Reliability optimization of series–parallel systems with mixed redundancy strategy in subsystems
  publication-title: Reliab Eng Syst Saf
– volume: 298
  start-page: 198
  year: 2015
  end-page: 224
  ident: bib0048
  article-title: Mathematical modeling and multi-objective evolutionary algorithms applied to dynamic flexible job shop scheduling problems
  publication-title: Inf Sci
– volume: 55
  start-page: 116
  year: 2015
  end-page: 128
  ident: bib0025
  article-title: Optimizing bi-objective redundancy allocation problem with a mixed redundancy strategy
  publication-title: ISA Trans
– volume: 183
  start-page: 17
  year: 2019
  ident: 10.1016/j.ress.2019.106681_bib0029
  article-title: Reliability optimization of series-parallel systems with K-mixed redundancy strategy
  publication-title: Reliab Eng Syst Saf
  doi: 10.1016/j.ress.2018.11.008
– volume: 24
  start-page: 1
  year: 2015
  ident: 10.1016/j.ress.2019.106681_bib0016
  article-title: An efficient biogeography based optimization algorithm for solving reliability optimization problems
  publication-title: Swarm Evolut Comput
  doi: 10.1016/j.swevo.2015.05.001
– volume: 172
  start-page: 225
  year: 2018
  ident: 10.1016/j.ress.2019.106681_bib0022
  article-title: Multi-objective optimization of reliability–redundancy allocation problem with cold-standby strategy using NSGA-II
  publication-title: Reliab Eng Syst Saf
  doi: 10.1016/j.ress.2017.12.019
– volume: 64
  start-page: 247
  issue: 1
  year: 2013
  ident: 10.1016/j.ress.2019.106681_bib0052
  article-title: Multi-objective reliability-redundancy allocation problem using particle swarm optimization
  publication-title: Comput Ind Eng
  doi: 10.1016/j.cie.2012.09.015
– volume: 2
  start-page: 221
  issue: 3
  year: 2014
  ident: 10.1016/j.ress.2019.106681_bib0037
  article-title: Muiltiobjective optimization using nondominated sorting in genetic algorithms
  publication-title: Evolut Comput
  doi: 10.1162/evco.1994.2.3.221
– volume: 6
  start-page: 182
  issue: 2
  year: 2002
  ident: 10.1016/j.ress.2019.106681_bib0043
  article-title: A fast and elitist multi-objective genetic algorithm: NSGA-II
  publication-title: IEEE Trans Evolut Comput
  doi: 10.1109/4235.996017
– volume: 167
  start-page: 572
  year: 2017
  ident: 10.1016/j.ress.2019.106681_bib0018
  article-title: Optimal reliability design of a system with k-out-of-n subsystems considering redundancy strategies
  publication-title: Reliab Eng Syst Saf
  doi: 10.1016/j.ress.2017.07.004
– volume: 48
  start-page: 1043
  issue: 11
  year: 2016
  ident: 10.1016/j.ress.2019.106681_bib0019
  article-title: A novel strategy for redundant components in reliability-redundancy allocation problems
  publication-title: IIE Trans
  doi: 10.1080/0740817X.2016.1189631
– volume: 37
  start-page: 143
  issue: 2
  year: 2007
  ident: 10.1016/j.ress.2019.106681_bib0009
  article-title: Recent advances in optimal reliability allocation
  publication-title: IEEE Trans Syst Man Cybern-Part A
  doi: 10.1109/TSMCA.2006.889476
– volume: 181
  start-page: 62
  year: 2019
  ident: 10.1016/j.ress.2019.106681_bib0026
  article-title: An improved particle swarm optimization algorithm for reliability-redundancy allocation problem with mixed redundancy strategy and heterogeneous components
  publication-title: Reliab Eng Syst Saf
  doi: 10.1016/j.ress.2018.09.005
– volume: 95
  start-page: 86
  year: 2018
  ident: 10.1016/j.ress.2019.106681_bib0006
  article-title: Optimized rescheduling of multiple production lines for flowshop production of reinforced precast concrete components
  publication-title: Autom Constr
  doi: 10.1016/j.autcon.2018.08.002
– volume: 113
  start-page: 328
  year: 2018
  ident: 10.1016/j.ress.2019.106681_bib0055
  article-title: Parallel genetic algorithm with a knowledge base for a redundancy allocation problem considering the sequence of heterogeneous components
  publication-title: Expert Syst Appl
  doi: 10.1016/j.eswa.2018.06.056
– volume: 44
  start-page: 57
  issue: 3
  year: 2008
  ident: 10.1016/j.ress.2019.106681_bib0049
  article-title: Study of improved genetic algorithm based on dual mutation and its simulation
  publication-title: Comput Eng Appl
– volume: 42
  start-page: 107
  year: 2014
  ident: 10.1016/j.ress.2019.106681_bib0010
  article-title: Reliability–redundancy allocation problem with cold-standby redundancy strategy
  publication-title: Simul Model Pract Theory
  doi: 10.1016/j.simpat.2013.12.013
– start-page: 839
  year: 2000
  ident: 10.1016/j.ress.2019.106681_bib0041
  article-title: The Pareto envelope-based selection algorithm for multi-objective optimization
– volume: 6
  start-page: 420
  issue: 5
  year: 2005
  ident: 10.1016/j.ress.2019.106681_bib0045
  article-title: Multiple objective particle swarm optimization technique for economic load dispatch
  publication-title: J Zhejiang Univ-Sci A
  doi: 10.1631/jzus.2005.A0420
– volume: 164
  start-page: 66
  year: 2017
  ident: 10.1016/j.ress.2019.106681_bib0027
  article-title: A new model for the redundancy allocation problem with component mixing and mixed redundancy strategy
  publication-title: Reliab Eng Syst Saf
  doi: 10.1016/j.ress.2017.03.009
– volume: 142
  start-page: 221
  year: 2015
  ident: 10.1016/j.ress.2019.106681_bib0013
  article-title: A particle-based simplified swarm optimization algorithm for reliability redundancy allocation problems
  publication-title: Reliab Eng Syst Saf
  doi: 10.1016/j.ress.2015.06.002
– volume: 33
  start-page: 471
  issue: 6
  year: 2001
  ident: 10.1016/j.ress.2019.106681_bib0031
  article-title: Cold-standby redundancy optimization for nonrepairable systems
  publication-title: IIE Trans
  doi: 10.1080/07408170108936846
– volume: 25
  start-page: 97
  issue: 2
  year: 2003
  ident: 10.1016/j.ress.2019.106681_bib0044
  article-title: A niched Pareto genetic algorithm for multiobjective environmental/economic dispatch
  publication-title: Int J Electr Power Energy Syst
  doi: 10.1016/S0142-0615(02)00027-3
– volume: 4
  start-page: 14
  issue: 1
  year: 2015
  ident: 10.1016/j.ress.2019.106681_bib0015
  article-title: An approach for solving constrained reliability-redundancy allocation problems using cuckoo search algorithm
  publication-title: Beni-Suef Univ J Basic Appl Sci
– volume: 2
  start-page: 1088
  issue: 5
  year: 2010
  ident: 10.1016/j.ress.2019.106681_bib0007
  article-title: Redundancy-allocation in pharmaceutical plant
  publication-title: Int J Eng Sci
– volume: 11
  start-page: 712
  issue: 6
  year: 2007
  ident: 10.1016/j.ress.2019.106681_bib0046
  article-title: MOEA/D: a multiobjective evolutionary algorithm based on decomposition
  publication-title: IEEE Trans Evolut Comput
  doi: 10.1109/TEVC.2007.892759
– volume: 93
  start-page: 550
  issue: 4
  year: 2008
  ident: 10.1016/j.ress.2019.106681_bib0033
  article-title: Reliability optimization of series-parallel systems with a choice of redundancy strategies using a genetic algorithm
  publication-title: Reliab Eng Syst Saf
  doi: 10.1016/j.ress.2007.02.009
– volume: 274
  start-page: 292
  year: 2016
  ident: 10.1016/j.ress.2019.106681_bib0060
  article-title: A hybrid pso-ga algorithm for constrained optimization problems
  publication-title: Appl Math Comput
– volume: 229
  start-page: 1785
  issue: 10
  year: 2015
  ident: 10.1016/j.ress.2019.106681_bib0014
  article-title: Launch vehicle multi-objective reliability-redundancy optimization using a hybrid genetic algorithm-particle swarm optimization
  publication-title: Proc Inst Mech Eng Part G
  doi: 10.1177/0954410014560381
– year: 2001
  ident: 10.1016/j.ress.2019.106681_bib0039
– volume: 33
  start-page: 335
  issue: 3
  year: 2014
  ident: 10.1016/j.ress.2019.106681_bib0012
  article-title: Bi-objective optimization of the reliability-redundancy allocation problem for series-parallel system
  publication-title: J Manuf Syst
  doi: 10.1016/j.jmsy.2014.02.008
– volume: 159
  start-page: 153
  year: 2017
  ident: 10.1016/j.ress.2019.106681_bib0017
  article-title: Reliability–redundancy allocation problem considering optimal redundancy strategy using parallel genetic algorithm
  publication-title: Reliab Eng Syst Saf
  doi: 10.1016/j.ress.2016.10.033
– start-page: 283
  year: 2001
  ident: 10.1016/j.ress.2019.106681_bib0042
  article-title: PESA-II: region-based selection in evolutionary multi-objective optimization
– volume: 26
  start-page: 1339
  issue: 3
  year: 2018
  ident: 10.1016/j.ress.2019.106681_bib0021
  article-title: Multiobjective reliability redundancy allocation problem with interval type-2 fuzzy uncertainty
  publication-title: IEEE Trans Fuzzy Syst
– volume: 478
  start-page: 499
  year: 2019
  ident: 10.1016/j.ress.2019.106681_bib0061
  article-title: A hybrid GSA-GA algorithm for constrained optimization problems
  publication-title: Inf Sci
  doi: 10.1016/j.ins.2018.11.041
– volume: 70
  start-page: 175
  issue: 2
  year: 2001
  ident: 10.1016/j.ress.2019.106681_bib0002
  article-title: The maximal profit flow model in designing multiple-production-line system with obtainable resource capacity
  publication-title: Int J Prod Econ
  doi: 10.1016/S0925-5273(00)00058-X
– volume: 49
  start-page: 176
  issue: 2
  year: 2000
  ident: 10.1016/j.ress.2019.106681_bib0008
  article-title: An annotated overview of system-reliability optimization
  publication-title: IEEE Trans Reliab
  doi: 10.1109/24.877336
– volume: 63
  start-page: 1209
  issue: 4
  year: 2012
  ident: 10.1016/j.ress.2019.106681_bib0004
  article-title: Reliability evaluation for a manufacturing network with multiple production lines
  publication-title: Comput Ind Eng
  doi: 10.1016/j.cie.2012.06.023
– volume: 63
  start-page: 109
  issue: 1
  year: 2012
  ident: 10.1016/j.ress.2019.106681_bib0034
  article-title: A bi-objective model to optimize reliability and cost of system with a choice of redundancy strategies
  publication-title: Comput Ind Eng
  doi: 10.1016/j.cie.2012.02.004
– volume: 232
  start-page: 38
  issue: 1
  year: 2018
  ident: 10.1016/j.ress.2019.106681_bib0028
  article-title: K-mixed strategy: a new redundancy strategy for reliability problems
  publication-title: Proc Inst Mech Eng Part O
– volume: 145
  start-page: 83
  year: 2016
  ident: 10.1016/j.ress.2019.106681_bib0059
  article-title: Multi-objective reliability redundancy allocation in an interval environment using particle swarm optimization
  publication-title: Reliab Eng Syst Saf
  doi: 10.1016/j.ress.2015.09.008
– volume: 106
  start-page: 191
  issue: 1
  year: 2007
  ident: 10.1016/j.ress.2019.106681_bib0003
  article-title: The design of multiple production lines under deadline constraint
  publication-title: Int J Prod Econ
  doi: 10.1016/j.ijpe.2006.05.012
– year: 2018
  ident: 10.1016/j.ress.2019.106681_bib0023
  article-title: A novel boundary swarm optimization method for reliability redundancy allocation problems
  publication-title: Reliab Eng Syst Saf
– volume: 130
  start-page: 132
  year: 2014
  ident: 10.1016/j.ress.2019.106681_bib0024
  article-title: Reliability optimization of series–parallel systems with mixed redundancy strategy in subsystems
  publication-title: Reliab Eng Syst Saf
  doi: 10.1016/j.ress.2014.06.001
– volume: 48
  start-page: 920
  issue: 6
  year: 2016
  ident: 10.1016/j.ress.2019.106681_bib0054
  article-title: Optimizing dynamic performance of multistate systems with heterogeneous 1-out-of-N warm standby components
  publication-title: IEEE Trans Syst Man Cybern
  doi: 10.1109/TSMC.2016.2633808
– volume: 183
  start-page: 29
  year: 2019
  ident: 10.1016/j.ress.2019.106681_bib0053
  article-title: Influence of failure propagation on mission abort policy in heterogeneous warm standby systems
  publication-title: Reliab Eng Syst Saf
  doi: 10.1016/j.ress.2018.11.006
– volume: 24
  start-page: 1185
  issue: 6
  year: 2013
  ident: 10.1016/j.ress.2019.106681_bib0050
  article-title: A new genetic algorithm for lot-streaming flow shop scheduling with limited capacity buffers
  publication-title: J Intell Manuf
  doi: 10.1007/s10845-012-0650-9
– volume: 144
  start-page: 147
  year: 2015
  ident: 10.1016/j.ress.2019.106681_bib0036
  article-title: Solving the redundancy allocation problem with multiple strategy choices using a new simplified particle swarm optimization
  publication-title: Reliab Eng Syst Saf
  doi: 10.1016/j.ress.2015.07.019
– volume: 41
  start-page: 3157
  issue: 7
  year: 2014
  ident: 10.1016/j.ress.2019.106681_bib0057
  article-title: Intuitionistic fuzzy optimization technique for solving multi-objective reliability optimization problems in interval environment
  publication-title: Expert Syst Appl
  doi: 10.1016/j.eswa.2013.11.014
– volume: 98
  start-page: 24
  issue: 1
  year: 2012
  ident: 10.1016/j.ress.2019.106681_bib0051
  article-title: Multi-objective optimization of linear multi-state multiple sliding window system
  publication-title: Reliab Eng Syst Saf
  doi: 10.1016/j.ress.2011.09.009
– volume: 72
  start-page: 321
  year: 2016
  ident: 10.1016/j.ress.2019.106681_bib0005
  article-title: Optimized flowshop scheduling of multiple production lines for precast production
  publication-title: Autom Constr
  doi: 10.1016/j.autcon.2016.08.021
– volume: 62
  start-page: 92
  issue: 1
  year: 2013
  ident: 10.1016/j.ress.2019.106681_bib0001
  article-title: A novel reliability evaluation technique for stochastic-flow manufacturing networks with multiple production lines
  publication-title: IEEE Trans Reliab
  doi: 10.1109/TR.2012.2220898
– volume: 38
  start-page: 1
  year: 2018
  ident: 10.1016/j.ress.2019.106681_bib0062
  article-title: A survey on multi-objective evolutionary algorithms for the solution of the environmental/economic dispatch problems
  publication-title: Swarm Evolut Comput
  doi: 10.1016/j.swevo.2017.06.002
– volume: 40
  start-page: 2961
  issue: 12
  year: 2013
  ident: 10.1016/j.ress.2019.106681_bib0011
  article-title: An efficient two phase approach for solving reliability–redundancy allocation problem using artificial bee colony technique
  publication-title: Comput Oper Res
  doi: 10.1016/j.cor.2013.07.014
– volume: 298
  start-page: 198
  year: 2015
  ident: 10.1016/j.ress.2019.106681_bib0048
  article-title: Mathematical modeling and multi-objective evolutionary algorithms applied to dynamic flexible job shop scheduling problems
  publication-title: Inf Sci
  doi: 10.1016/j.ins.2014.11.036
– volume: 159
  start-page: 37
  year: 2017
  ident: 10.1016/j.ress.2019.106681_bib0056
  article-title: Reliability models for a nonrepairable system with heterogeneous components having a phase-type time-to-failure distribution
  publication-title: Reliab Eng Syst Saf
  doi: 10.1016/j.ress.2016.10.019
– volume: 50
  start-page: 698
  issue: 4
  year: 2018
  ident: 10.1016/j.ress.2019.106681_bib0020
  article-title: A hybrid Jaya algorithm for reliability–redundancy allocation problems
  publication-title: Eng Optim
  doi: 10.1080/0305215X.2017.1337755
– volume: 4
  start-page: 145
  issue: 2
  year: 2019
  ident: 10.1016/j.ress.2019.106681_bib0058
  article-title: Type-2 fuzzy reliability–redundancy allocation problem and its solution using particle-swarm optimization algorithm
  publication-title: Granul Comput
  doi: 10.1007/s41066-018-0106-5
– volume: 3
  start-page: 257
  issue: 4
  year: 1999
  ident: 10.1016/j.ress.2019.106681_bib0038
  article-title: Multiobjective evolutionary algorithms: a comparative case study and the strength pareto approach
  publication-title: IEEE Trans Evolut Comput
  doi: 10.1109/4235.797969
– volume: 55
  start-page: 116
  year: 2015
  ident: 10.1016/j.ress.2019.106681_bib0025
  article-title: Optimizing bi-objective redundancy allocation problem with a mixed redundancy strategy
  publication-title: ISA Trans
  doi: 10.1016/j.isatra.2014.10.002
– volume: 2
  start-page: 720
  issue: 5
  year: 2008
  ident: 10.1016/j.ress.2019.106681_bib0047
  article-title: Solving multi-objective optimal power flow using differential evolution
  publication-title: IET Gener Transm Distrib
  doi: 10.1049/iet-gtd:20070457
– volume: 44
  start-page: 876
  issue: 7–8
  year: 2015
  ident: 10.1016/j.ress.2019.106681_bib0030
  article-title: Cold-standby redundancy allocation problem with degrading components
  publication-title: Int J Gen Syst
  doi: 10.1080/03081079.2015.1028541
– volume: 119
  start-page: 158
  year: 2013
  ident: 10.1016/j.ress.2019.106681_bib0035
  article-title: An efficient simulated annealing algorithm for the redundancy allocation problem with a choice of redundancy strategies
  publication-title: Reliab Eng Syst Saf
  doi: 10.1016/j.ress.2013.05.016
– volume: 8
  start-page: 149
  issue: 2
  year: 2014
  ident: 10.1016/j.ress.2019.106681_bib0040
  article-title: Approximating the nondominated front using the pareto archived evolution strategy
  publication-title: Evolut Comput
  doi: 10.1162/106365600568167
– volume: 35
  start-page: 535
  issue: 6
  year: 2003
  ident: 10.1016/j.ress.2019.106681_bib0032
  article-title: Maximization of system reliability with a choice of redundancy strategies
  publication-title: IIE Trans
  doi: 10.1080/07408170304420
SSID ssj0004957
Score 2.5004022
Snippet •A new model of multi-type production systems that generalizes the manufacturing systems with multiple switchable production lines is developed.•A binary...
This paper innovatively proposes a new model of multi-type production system which can process different types of production. The multi-type production system...
SourceID proquest
crossref
elsevier
SourceType Aggregation Database
Enrichment Source
Index Database
Publisher
StartPage 106681
SubjectTerms Evolutionary algorithms
Markov chains
Multi-objective optimization
Multi-type production system
Multiple objective analysis
NSGA-II
Optimization
Production lines
Production planning
Redundancy
Redundancy strategy
Reliability engineering
Reliability-redundancy allocation
Structure matrix
Subsystems
Title Multi-objective optimization of reliability-redundancy allocation problem for multi-type production systems considering redundancy strategies
URI https://dx.doi.org/10.1016/j.ress.2019.106681
https://www.proquest.com/docview/2330022770
Volume 193
WOSCitedRecordID wos000501641400072&url=https%3A%2F%2Fcvtisr.summon.serialssolutions.com%2F%23%21%2Fsearch%3Fho%3Df%26include.ft.matches%3Dt%26l%3Dnull%26q%3D
hasFullText 1
inHoldings 1
isFullTextHit
isPrint
journalDatabaseRights – providerCode: PRVESC
  databaseName: Elsevier SD Freedom Collection Journals 2021
  customDbUrl:
  eissn: 1879-0836
  dateEnd: 99991231
  omitProxy: false
  ssIdentifier: ssj0004957
  issn: 0951-8320
  databaseCode: AIEXJ
  dateStart: 19950101
  isFulltext: true
  titleUrlDefault: https://www.sciencedirect.com
  providerName: Elsevier
link http://cvtisr.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwtV1Lb9QwELaWlgMcEE9RKMgHbpErZx0n8bFCRYBQhVARe4vsxFntapss-6jKj-Dv8PsYP5K4C63ogUsUZe1Za-fLeDw78w1CbxQ4qazOOGFMjUlScUZEVTMiU54oLZVhSbPNJrLT03wyEZ9Ho19dLczFImua_PJSLP-rquEZKNuUzt5C3b1QeAD3oHS4gtrh-k-KtyW1pFVzZ8qiFozCua-2NK7hSi9mjpz7B1lpU0RmDGxk_oB34bvIN5mxGYg24ZDYQO3SkcOaEY7_eW1y1m27TxNvCGStNx0BRej7fhm-ONIDDaIFnxMYrWXteUlckN8Zom961ucNzXyyfzP9DsCe9vDb2r2kbaZNgPdPWxsInsykLQsLIxxjGkQ4ulBlTMDy0CtWW7DA7sLBNnWtX_7YElx0Yn5kohcmlU8cDYOv8m_v7It9tmKXCDcvjIzCyCicjDtof5xxAdZ0__jDyeTjUJErHMdst3JfruUyC3dXcp1LtOMcWI_n7CF64I8q-NhB7BEa6eYxuh8QWD5BP3fAhkOw4bbGfwcbHsCGPdgwgA0PYMMD2LAHGw7AhgNZA9ieoq_vTs7evie-wQcp2TjfEM3gQF3RpIy5rLNUZ1lNa1rRKi5pJnOV6jwD91UkmiquBefgjLO61FJyyUsl2DO017SNfo4wnL5gZsxUbrrnVKkEX5QpyViSqJiK6gDF3W9clJ793jRhWRTXa_cARf2cpeN-uXE071RXeO_VeaUFIPHGeYedngtvRuBzxiy5Z0Zf3GoRL9G94Q06RHub1Va_QnfLi81svXrtUfob-jvQHA
linkProvider Elsevier
openUrl ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Multi-objective+optimization+of+reliability-redundancy+allocation+problem+for+multi-type+production+systems+considering+redundancy+strategies&rft.jtitle=Reliability+engineering+%26+system+safety&rft.au=Wang%2C+Wei&rft.au=Lin%2C+Mingqiang&rft.au=Fu%2C+Yongnian&rft.au=Luo%2C+Xiaoping&rft.date=2020-01-01&rft.issn=0951-8320&rft.volume=193&rft.spage=106681&rft_id=info:doi/10.1016%2Fj.ress.2019.106681&rft.externalDBID=n%2Fa&rft.externalDocID=10_1016_j_ress_2019_106681
thumbnail_l http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=0951-8320&client=summon
thumbnail_m http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=0951-8320&client=summon
thumbnail_s http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=0951-8320&client=summon