Microstructure evolution mechanism of tungsten induced by ultrasonic elliptical vibration cutting at atomic/nano scale
•Dislocation, amorphous and nanocrystal are the mechanisms of plastic deformation of tungsten.•Tungsten surface forms nanocrystals under UEVC compared with common cutting.•The instantaneous shear stress of UEVC is three times that of common cutting.•The relationship between shear stress and microstr...
Uloženo v:
| Vydáno v: | International journal of mechanical sciences Ročník 253; s. 108397 |
|---|---|
| Hlavní autoři: | , , , , , |
| Médium: | Journal Article |
| Jazyk: | angličtina |
| Vydáno: |
Elsevier Ltd
01.09.2023
|
| Témata: | |
| ISSN: | 0020-7403, 1879-2162 |
| On-line přístup: | Získat plný text |
| Tagy: |
Přidat tag
Žádné tagy, Buďte první, kdo vytvoří štítek k tomuto záznamu!
|
| Abstract | •Dislocation, amorphous and nanocrystal are the mechanisms of plastic deformation of tungsten.•Tungsten surface forms nanocrystals under UEVC compared with common cutting.•The instantaneous shear stress of UEVC is three times that of common cutting.•The relationship between shear stress and microstructure evolution in UEVC is given.•The microstructure evolution mechanism of tungsten induced by UEVC is revealed.
Ultrasonic elliptical vibration cutting (UEVC) technology has been utilized for ultra-precision machining of difficult-to-machine metal materials such as tungsten. Nevertheless, the microstructure evolution mechanism of tungsten under the synergistic effect of ultrasonic and mechanical loads remains unclear, particularly at the atomic/nano scale. Additionally, the plastic deformation mechanism of tungsten differs from that of other metallic materials due to its low dislocation mobility (brittle at room temperature). Hence, the molecular dynamics simulation of UEVC for single crystal tungsten was established to study its mechanisms in plastic deformation and microstructure evolution under stress induction in this study. The results indicated that the main plastic deformation mechanisms including dislocation slip, amorphous phase transformation and nanocrystal were found during the tungsten removal, and accompanied by some extent of lattice distortion. The instantaneous shear stress of UEVC reached 16.88 GPa. Compared with common cutting (CC), the formation of nanocrystals mainly occurred in UEVC because the instantaneous shear stress exceeded the critical shear stress of multiple slip systems during cutting. Similarly, the high dislocation density and high plastic deformation degree of the machined zone in UEVC were also attributed to the high shear stress. The dynamic recrystallization of tungsten induced by UEVC was realized from dislocation slip to the formation of dense dislocation walls, followed by the formation of sub-grain boundaries, and finally to the formation of nanocrystals.
[Display omitted] |
|---|---|
| AbstractList | •Dislocation, amorphous and nanocrystal are the mechanisms of plastic deformation of tungsten.•Tungsten surface forms nanocrystals under UEVC compared with common cutting.•The instantaneous shear stress of UEVC is three times that of common cutting.•The relationship between shear stress and microstructure evolution in UEVC is given.•The microstructure evolution mechanism of tungsten induced by UEVC is revealed.
Ultrasonic elliptical vibration cutting (UEVC) technology has been utilized for ultra-precision machining of difficult-to-machine metal materials such as tungsten. Nevertheless, the microstructure evolution mechanism of tungsten under the synergistic effect of ultrasonic and mechanical loads remains unclear, particularly at the atomic/nano scale. Additionally, the plastic deformation mechanism of tungsten differs from that of other metallic materials due to its low dislocation mobility (brittle at room temperature). Hence, the molecular dynamics simulation of UEVC for single crystal tungsten was established to study its mechanisms in plastic deformation and microstructure evolution under stress induction in this study. The results indicated that the main plastic deformation mechanisms including dislocation slip, amorphous phase transformation and nanocrystal were found during the tungsten removal, and accompanied by some extent of lattice distortion. The instantaneous shear stress of UEVC reached 16.88 GPa. Compared with common cutting (CC), the formation of nanocrystals mainly occurred in UEVC because the instantaneous shear stress exceeded the critical shear stress of multiple slip systems during cutting. Similarly, the high dislocation density and high plastic deformation degree of the machined zone in UEVC were also attributed to the high shear stress. The dynamic recrystallization of tungsten induced by UEVC was realized from dislocation slip to the formation of dense dislocation walls, followed by the formation of sub-grain boundaries, and finally to the formation of nanocrystals.
[Display omitted] |
| ArticleNumber | 108397 |
| Author | Dong, Zhigang Guo, Xiaoguang Wang, Kaixuan Bao, Yan Kang, Renke Wang, Hao |
| Author_xml | – sequence: 1 givenname: Hao orcidid: 0000-0001-9418-5998 surname: Wang fullname: Wang, Hao – sequence: 2 givenname: Renke orcidid: 0000-0001-7447-3140 surname: Kang fullname: Kang, Renke – sequence: 3 givenname: Yan orcidid: 0000-0002-2310-6129 surname: Bao fullname: Bao, Yan – sequence: 4 givenname: Kaixuan surname: Wang fullname: Wang, Kaixuan – sequence: 5 givenname: Xiaoguang orcidid: 0000-0002-5837-2021 surname: Guo fullname: Guo, Xiaoguang – sequence: 6 givenname: Zhigang orcidid: 0000-0002-3053-7381 surname: Dong fullname: Dong, Zhigang email: dongzg@dlut.edu.cn |
| BookMark | eNqFkN1KAzEQhYNUsFZfQfIC2yab7f6AF0rxDyre6HVIsrN1yjYpSbbQtzdt9cabwsDAcM5hzndNRtZZIOSOsylnvJytp7jegAkGpznLRTrWoqkuyJjXVZPlvMxHZMxYzrKqYOKKXIewZoxXbC7GZPeOxrsQ_WDi4IHCzvVDRGdpivxWFsOGuo7Gwa5CBEvRtoOBluo9HfroVXAWDYW-x21Eo3q6Q-3VMcAMMaJdURXTuA2amVXW0ZBUcEMuO9UHuP3dE_L1_PS5eM2WHy9vi8dlZgTPY9Zo1bSN0HXZqW4-r6CsNau7VpdNUXBTMyMqDQYqoXMtmq5roWxaPoeiNAWoWkzI_Sn3UDJ46KTBeHwv_Y695EweGMq1_GMoDwzliWGyl__sW48b5ffnjQ8nI6RyOwQvkwJsIoceTJStw3MRP6XxlwI |
| CitedBy_id | crossref_primary_10_1016_j_surfin_2025_107205 crossref_primary_10_1016_j_jmatprotec_2025_119024 crossref_primary_10_1016_j_jmrt_2025_08_278 crossref_primary_10_1016_j_triboint_2025_110661 crossref_primary_10_1088_1361_651X_ad6a74 crossref_primary_10_1016_j_ijrmhm_2025_107405 crossref_primary_10_1016_j_jmrt_2025_07_216 crossref_primary_10_1007_s43452_025_01184_9 crossref_primary_10_3390_mi16090976 crossref_primary_10_1016_j_mtcomm_2023_107668 crossref_primary_10_1016_j_mtcomm_2024_109827 crossref_primary_10_1016_j_triboint_2025_111197 crossref_primary_10_1016_j_ijmecsci_2025_110769 crossref_primary_10_1063_5_0231194 crossref_primary_10_1007_s12541_024_01204_3 crossref_primary_10_1016_j_ijmecsci_2025_110806 crossref_primary_10_1016_j_ymssp_2023_110540 crossref_primary_10_1016_j_triboint_2025_110757 crossref_primary_10_1016_j_precisioneng_2024_01_018 crossref_primary_10_1016_j_intermet_2024_108293 crossref_primary_10_1016_j_measurement_2024_115708 crossref_primary_10_1080_10910344_2025_2531989 crossref_primary_10_1016_j_triboint_2023_109121 crossref_primary_10_1016_j_jmatprotec_2023_118187 crossref_primary_10_1016_j_jmrt_2025_03_167 crossref_primary_10_1007_s00170_025_16311_2 crossref_primary_10_1016_j_jmapro_2024_07_139 crossref_primary_10_1016_j_jmrt_2025_02_229 crossref_primary_10_1016_j_ijmecsci_2024_109070 crossref_primary_10_1016_j_jmapro_2024_12_038 crossref_primary_10_1016_j_jmatprotec_2024_118649 |
| Cites_doi | 10.1016/j.ijplas.2022.103329 10.1016/j.jclepro.2019.119254 10.1007/s00170-012-4146-8 10.1016/j.ceramint.2020.09.078 10.1016/j.apsusc.2020.146608 10.1007/s00170-018-2015-9 10.1016/j.apsusc.2022.153692 10.1115/1.4049965 10.1016/0001-6160(53)90106-0 10.1016/j.jmapro.2020.01.027 10.1007/s40436-022-00398-x 10.1016/j.ijmachtools.2022.103890 10.1016/j.triboint.2020.106492 10.1016/j.ijmecsci.2022.107172 10.1016/j.ijmecsci.2022.107790 10.1016/j.ijmecsci.2021.106888 10.1007/s00170-015-7645-6 10.1007/s10845-020-01669-9 10.1007/s00170-019-04463-x 10.1016/j.matdes.2020.108658 10.1016/j.ijmecsci.2022.107375 10.1016/j.ijmecsci.2016.08.004 10.3390/met11010071 10.1016/j.ijmecsci.2022.107433 10.1080/10910344.2022.2129980 10.1007/s00170-022-10293-1 10.1007/s00170-022-09494-5 10.1016/j.ijmachtools.2020.103687 10.1016/j.mssp.2021.105760 10.1016/j.matdes.2022.110859 10.1016/j.ijmecsci.2022.108072 10.1007/s00170-020-05939-x 10.1103/PhysRevB.64.184102 10.1016/j.jmapro.2018.09.029 10.1016/j.apsusc.2022.155151 10.1038/s41467-021-22447-y 10.1016/j.apsusc.2021.149668 10.1016/j.matdes.2020.108501 10.1007/s00170-021-06684-5 10.1016/j.ijmachtools.2020.103594 10.1016/j.ijmecsci.2022.107384 10.1016/j.ijmachtools.2021.103827 10.1115/1.4054839 10.1016/j.ceramint.2019.04.238 10.1016/j.jmrt.2021.08.096 10.3390/mi13060819 10.1016/j.matdes.2020.108755 10.1016/j.ijmachtools.2014.09.013 10.1016/j.commatsci.2020.109851 10.1016/j.apsusc.2021.149771 10.1016/j.intermet.2020.107079 10.1016/j.scriptamat.2022.115154 10.1016/j.jmapro.2023.02.053 10.1016/j.ijmachtools.2021.103718 10.1016/j.commatsci.2020.109915 10.1007/s00170-015-8274-9 10.1016/j.jmapro.2022.04.067 10.1016/j.apsusc.2022.152944 10.1016/j.apsusc.2015.03.061 10.1016/j.scriptamat.2021.114154 |
| ContentType | Journal Article |
| Copyright | 2023 |
| Copyright_xml | – notice: 2023 |
| DBID | AAYXX CITATION |
| DOI | 10.1016/j.ijmecsci.2023.108397 |
| DatabaseName | CrossRef |
| DatabaseTitle | CrossRef |
| DatabaseTitleList | |
| DeliveryMethod | fulltext_linktorsrc |
| Discipline | Engineering |
| EISSN | 1879-2162 |
| ExternalDocumentID | 10_1016_j_ijmecsci_2023_108397 S0020740323002990 |
| GroupedDBID | --K --M -~X .~1 0R~ 1B1 1~. 1~5 4.4 457 4G. 5GY 5VS 7-5 71M 8P~ 9JN AACTN AAEDT AAEDW AAIAV AAIKJ AAKOC AALRI AAOAW AAQFI AAXUO ABFRF ABJNI ABMAC ABYKQ ACDAQ ACGFO ACGFS ACRLP ADBBV ADEZE ADTZH AEBSH AECPX AEFWE AEKER AENEX AFKWA AFTJW AGHFR AGUBO AGYEJ AHHHB AHJVU AIEXJ AIKHN AITUG AJOXV ALMA_UNASSIGNED_HOLDINGS AMFUW AMRAJ AXJTR BJAXD BKOJK BLXMC CS3 DU5 EBS EFJIC EFLBG EO8 EO9 EP2 EP3 FDB FIRID FNPLU FYGXN G-Q GBLVA IHE J1W JJJVA KOM LY7 M41 MO0 N9A O-L O9- OAUVE OZT P-8 P-9 P2P PC. Q38 RNS ROL RPZ SDF SDG SES SEW SPC SPCBC SST SSZ T5K TN5 UNMZH XPP XSW ZMT ~G- 29J 6TJ 9DU AAQXK AATTM AAXKI AAYWO AAYXX ABFNM ABWVN ABXDB ACKIV ACLOT ACNNM ACRPL ACVFH ADCNI ADIYS ADMUD ADNMO AEIPS AEUPX AFJKZ AFPUW AGQPQ AIGII AIIUN AKBMS AKRWK AKYEP ANKPU APXCP ASPBG AVWKF AZFZN CITATION EFKBS EJD FEDTE FGOYB G-2 HVGLF HZ~ R2- SET WUQ ~HD |
| ID | FETCH-LOGICAL-c312t-9ba9d93b86faf557e68b08fdb69441c80c37bece73b2b39ffde69d15e46c4ea83 |
| ISICitedReferencesCount | 39 |
| ISICitedReferencesURI | http://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=Summon&SrcAuth=ProQuest&DestLinkType=CitingArticles&DestApp=WOS_CPL&KeyUT=000989012900001&url=https%3A%2F%2Fcvtisr.summon.serialssolutions.com%2F%23%21%2Fsearch%3Fho%3Df%26include.ft.matches%3Dt%26l%3Dnull%26q%3D |
| ISSN | 0020-7403 |
| IngestDate | Sat Nov 29 07:01:34 EST 2025 Tue Nov 18 22:35:05 EST 2025 Fri Feb 23 02:34:12 EST 2024 |
| IsPeerReviewed | true |
| IsScholarly | true |
| Keywords | Microstructure evolution mechanism Molecular dynamics Ultrasonic elliptical vibration cutting Stress induction Body-centered cubic tungsten Deformation mechanism |
| Language | English |
| LinkModel | OpenURL |
| MergedId | FETCHMERGED-LOGICAL-c312t-9ba9d93b86faf557e68b08fdb69441c80c37bece73b2b39ffde69d15e46c4ea83 |
| ORCID | 0000-0001-7447-3140 0000-0002-2310-6129 0000-0002-3053-7381 0000-0001-9418-5998 0000-0002-5837-2021 |
| ParticipantIDs | crossref_citationtrail_10_1016_j_ijmecsci_2023_108397 crossref_primary_10_1016_j_ijmecsci_2023_108397 elsevier_sciencedirect_doi_10_1016_j_ijmecsci_2023_108397 |
| PublicationCentury | 2000 |
| PublicationDate | 2023-09-01 2023-09-00 |
| PublicationDateYYYYMMDD | 2023-09-01 |
| PublicationDate_xml | – month: 09 year: 2023 text: 2023-09-01 day: 01 |
| PublicationDecade | 2020 |
| PublicationTitle | International journal of mechanical sciences |
| PublicationYear | 2023 |
| Publisher | Elsevier Ltd |
| Publisher_xml | – name: Elsevier Ltd |
| References | Zhang, Kumar, Rahman, Liu (bib0018) 2013; 65 Goel, Luo, Agrawal, Reuben (bib0036) 2014; 88 Tong, Zhao, Chen, Zhao (bib0025) 2020; 106 Wang, Zhai, Wang, Wei (bib0045) 2023; 225 Bai, Sun, Gao, Leopold (bib0022) 2016; 83 Liu, Xu, Zhang, Xiao, Chen, Xu (bib0035) 2022; 220 Zhang, Zhang, Geng, Liu, Shao, Jiang (bib0053) 2020; 191 Li, Hu, Zhang, Geng, Meng (bib0030) 2022; 239 Li, Guo, Yuan, Li, Kang, Guo (bib0028) 2021; 554 Yao, Liu, Song, Wang, Cai (bib0055) 2022; 10 Doan, Fang, Chen (bib0069) 2021; 131 Wang, Song, Li, Jiao (bib0056) 2022; 121 Ding, Guo, Li, Liu, Ran, Wu, Qiu, Deng, Wu, Li, Huang (bib0001) 2021; 204 Wang, Jin, Zhao, Niu, Guo (bib0005) 2021; 482 Wang, Hu, Cong, Hu, Wang (bib0043) 2020; 52 Tan, Zhao, Guo, Zou, He, Geng, Hu, Sun (bib0008) 2020; 248 Jung, Hayasaka, Shamoto, Xu (bib0016) 2020; 64 Huang, Tang, Zhou, Shao, Yi, Zhao, Wen (bib0058) 2022; 597 Zhao, Zhang, Zhang, Hartmaier (bib0042) 2021; 47 Li, Zhang, Piao (bib0064) 2019; 45 Li, Piao, Zhang, Zhang, Hu, Wang (bib0051) 2022; 5 Zhang, Kang, Dong, Wang, Zhu, Xu, Guo (bib0060) 2020; 189 Yang, Zhu, Zhang, Ni, Lin (bib0011) 2020; 156 Guo, Gou, Dong, Yuan, Li, Du, Kang (bib0038) 2020; 526 Lin, Han, Zhou, Hao, Lu (bib0007) 2016; 117 Peng, Li, Chang, Wang, Chen, Xie, Wang, Geng, Huang, Zhou, Luo (bib0027) 2021; 57 Dong, Wang, Qi, Guo, Kang, Bao (bib0040) 2023; 237 Tan, Zhao, Zou, Sun (bib0044) 2018; 97 Zhang, Cheng, Chen (bib0037) 2022; 588 Kang, Song, Dong, Pan, Zhang, Bao (bib0066) 2021; 50 Liu, Sheng, Xu (bib0013) 2023; 244 Zhang, Dong, Yuan, Guo, Kang, Guo (bib0032) 2021; 128 Liao, la Monaca, Murray, Speidel, Ushmaev, Clare (bib0070) 2021; 162 Zhao, Guo, Wang, Yin, Kang, Dong, Bao (bib0021) 2023; 92 Guo, Wang, Gao, Chen, Liu, Hu, Xiao, Wang, Gao, Deng (bib0062) 2022; 155 Wang, Zhang, Fang, Xu, Chen, Xue (bib0049) 2020; 183 Zhang, Zhang, Yu, Wang (bib0019) 2021; 26 Bai, Xu, Qian (bib0020) 2022; 220 Pan, Kang, Dong, Du, Yin, Bao (bib0046) 2020; 33 Gay, Hirsch, Kelly (bib0067) 1953; 1 Lotfi, Amini, Akbari (bib0017) 2020; 151 Wang, Liang, Zhao, Wang, Wang (bib0014) 2020; 192 Long, Qiu, Zheng, Liu, Chen (bib0026) 2021; 50 Nava, Coello-Velazquez, Menendez-Aguado (bib0006) 2021; 11 Zhang, Guo, Yuan, Dong, Kang (bib0029) 2021; 556 Wang, Yu, Zhang (bib0034) 2020; 184 Wang, Pan, Zhang, Men, Fu, Ren (bib0047) 2022; 13 Wang, Guo, Dong, Yuan, Bao, Kang (bib0003) 2022; 144 Luo, Wang, Zhang (bib0023) 2020; 110 Zhang, Li, Li, Zhai, Zhang, Ma, Mao, Deng, Li, Li, Wang, Liu, Zhang, Han (bib0002) 2021; 12 Wang, Bai, Chen, Sun, Guo, Liang (bib0048) 2015; 344 Zhou, Lu, Lin, Du (bib0052) 2022; 15 Ahmadpoor, Khajehzadeh, Razfar (bib0059) 2022; 26 Huo, Zhao, Yin, Guo, Wang (bib0024) 2021; 113 Liu, Xu, Zhang, Liu, He, Zhao, Liu (bib0065) 2022; 177 Zhang, Dong, Zhang, Guo, Yuan, Jin, Kang, Guo (bib0033) 2022; 214 Pan, Bai, Xu (bib0004) 2022; 123 Huang, Yan (bib0012) 2022; 311 Zhou, Zhao (bib0010) 2016; 86 Li, Piao, Meng, Zhang, Li, Zhang (bib0031) 2021; 578 Huang, Yu, Zhang, Zhang, Chen (bib0015) 2019; 36 Yin, Dong, Bao, Kang, Du, Pan (bib0009) 2021; 143 Zhou, Lu, Lin, Zhou, Guo, Du (bib0054) 2022; 79 Qin, Zhu, Wiercigroch, Ren, Hao, Ning, Zhao (bib0057) 2022; 227 Lee, Baskes, Kim, Cho (bib0041) 2001; 64 Li, Piao, Meng, Hu, Li, Zhang (bib0050) 2022; 172 Monaca, Murray, Liao, Speidel, Robles-Linares, Axinte (bib0063) 2021; 164 Zhou, Huang, Li, Zhu (bib0068) 2023; 608 Tiwari, Balaji, Krishnaswamy, mirthalingam (bib0061) 2022; 227 Wang, Dong, Yuan, Guo, Kang, Bao (bib0039) 2022; 225 Tan (10.1016/j.ijmecsci.2023.108397_bib0008) 2020; 248 Goel (10.1016/j.ijmecsci.2023.108397_bib0036) 2014; 88 Nava (10.1016/j.ijmecsci.2023.108397_bib0006) 2021; 11 Tiwari (10.1016/j.ijmecsci.2023.108397_bib0061) 2022; 227 Lotfi (10.1016/j.ijmecsci.2023.108397_bib0017) 2020; 151 Qin (10.1016/j.ijmecsci.2023.108397_bib0057) 2022; 227 Wang (10.1016/j.ijmecsci.2023.108397_bib0034) 2020; 184 Liao (10.1016/j.ijmecsci.2023.108397_bib0070) 2021; 162 Zhou (10.1016/j.ijmecsci.2023.108397_bib0054) 2022; 79 Zhou (10.1016/j.ijmecsci.2023.108397_bib0052) 2022; 15 Wang (10.1016/j.ijmecsci.2023.108397_bib0045) 2023; 225 Huang (10.1016/j.ijmecsci.2023.108397_bib0015) 2019; 36 Zhang (10.1016/j.ijmecsci.2023.108397_bib0019) 2021; 26 Wang (10.1016/j.ijmecsci.2023.108397_bib0048) 2015; 344 Yang (10.1016/j.ijmecsci.2023.108397_bib0011) 2020; 156 Wang (10.1016/j.ijmecsci.2023.108397_bib0056) 2022; 121 Gay (10.1016/j.ijmecsci.2023.108397_bib0067) 1953; 1 Doan (10.1016/j.ijmecsci.2023.108397_bib0069) 2021; 131 Wang (10.1016/j.ijmecsci.2023.108397_bib0014) 2020; 192 Zhou (10.1016/j.ijmecsci.2023.108397_bib0010) 2016; 86 Zhang (10.1016/j.ijmecsci.2023.108397_bib0037) 2022; 588 Wang (10.1016/j.ijmecsci.2023.108397_bib0005) 2021; 482 Zhang (10.1016/j.ijmecsci.2023.108397_bib0018) 2013; 65 Yao (10.1016/j.ijmecsci.2023.108397_bib0055) 2022; 10 Lee (10.1016/j.ijmecsci.2023.108397_bib0041) 2001; 64 Peng (10.1016/j.ijmecsci.2023.108397_bib0027) 2021; 57 Guo (10.1016/j.ijmecsci.2023.108397_bib0038) 2020; 526 Pan (10.1016/j.ijmecsci.2023.108397_bib0004) 2022; 123 Zhang (10.1016/j.ijmecsci.2023.108397_bib0060) 2020; 189 Monaca (10.1016/j.ijmecsci.2023.108397_bib0063) 2021; 164 Kang (10.1016/j.ijmecsci.2023.108397_bib0066) 2021; 50 Zhang (10.1016/j.ijmecsci.2023.108397_bib0029) 2021; 556 Long (10.1016/j.ijmecsci.2023.108397_bib0026) 2021; 50 Wang (10.1016/j.ijmecsci.2023.108397_bib0047) 2022; 13 Bai (10.1016/j.ijmecsci.2023.108397_bib0020) 2022; 220 Li (10.1016/j.ijmecsci.2023.108397_bib0030) 2022; 239 Zhou (10.1016/j.ijmecsci.2023.108397_bib0068) 2023; 608 Zhang (10.1016/j.ijmecsci.2023.108397_bib0002) 2021; 12 Ding (10.1016/j.ijmecsci.2023.108397_bib0001) 2021; 204 Bai (10.1016/j.ijmecsci.2023.108397_bib0022) 2016; 83 Li (10.1016/j.ijmecsci.2023.108397_bib0031) 2021; 578 Wang (10.1016/j.ijmecsci.2023.108397_bib0039) 2022; 225 Huang (10.1016/j.ijmecsci.2023.108397_bib0012) 2022; 311 Dong (10.1016/j.ijmecsci.2023.108397_bib0040) 2023; 237 Wang (10.1016/j.ijmecsci.2023.108397_bib0003) 2022; 144 Zhao (10.1016/j.ijmecsci.2023.108397_bib0042) 2021; 47 Huang (10.1016/j.ijmecsci.2023.108397_bib0058) 2022; 597 Liu (10.1016/j.ijmecsci.2023.108397_bib0035) 2022; 220 Li (10.1016/j.ijmecsci.2023.108397_bib0028) 2021; 554 Jung (10.1016/j.ijmecsci.2023.108397_bib0016) 2020; 64 Liu (10.1016/j.ijmecsci.2023.108397_bib0065) 2022; 177 Wang (10.1016/j.ijmecsci.2023.108397_bib0043) 2020; 52 Wang (10.1016/j.ijmecsci.2023.108397_bib0049) 2020; 183 Li (10.1016/j.ijmecsci.2023.108397_bib0064) 2019; 45 Tong (10.1016/j.ijmecsci.2023.108397_bib0025) 2020; 106 Liu (10.1016/j.ijmecsci.2023.108397_bib0013) 2023; 244 Yin (10.1016/j.ijmecsci.2023.108397_bib0009) 2021; 143 Huo (10.1016/j.ijmecsci.2023.108397_bib0024) 2021; 113 Zhang (10.1016/j.ijmecsci.2023.108397_bib0032) 2021; 128 Luo (10.1016/j.ijmecsci.2023.108397_bib0023) 2020; 110 Li (10.1016/j.ijmecsci.2023.108397_bib0050) 2022; 172 Guo (10.1016/j.ijmecsci.2023.108397_bib0062) 2022; 155 Zhang (10.1016/j.ijmecsci.2023.108397_bib0033) 2022; 214 Tan (10.1016/j.ijmecsci.2023.108397_bib0044) 2018; 97 Ahmadpoor (10.1016/j.ijmecsci.2023.108397_bib0059) 2022; 26 Lin (10.1016/j.ijmecsci.2023.108397_bib0007) 2016; 117 Zhang (10.1016/j.ijmecsci.2023.108397_bib0053) 2020; 191 Pan (10.1016/j.ijmecsci.2023.108397_bib0046) 2020; 33 Li (10.1016/j.ijmecsci.2023.108397_bib0051) 2022; 5 Zhao (10.1016/j.ijmecsci.2023.108397_bib0021) 2023; 92 |
| References_xml | – volume: 97 start-page: 1397 year: 2018 end-page: 1406 ident: bib0044 article-title: A novel ultrasonic elliptical vibration cutting device based on a sandwiched and symmetrical structure publication-title: Int J Adv Manuf Technol – volume: 131 year: 2021 ident: bib0069 article-title: Machining mechanism and deformation behavior of high-entropy alloy under elliptical vibration cutting publication-title: Intermetallics – volume: 52 start-page: 12 year: 2020 end-page: 25 ident: bib0043 article-title: A novel investigation on horizontal and 3D elliptical ultrasonic vibrations in rotary ultrasonic surface machining of carbon fiber reinforced plastic composites publication-title: J Manuf Process – volume: 12 start-page: 2218 year: 2021 ident: bib0002 article-title: Timely and atomic-resolved high-temperature mechanical investigation of ductile fracture and atomistic mechanisms of tungsten publication-title: Nat Commun – volume: 183 year: 2020 ident: bib0049 article-title: Study on nano-cutting of brittle material by molecular dynamics using dynamic modeling publication-title: Comput Mater Sci – volume: 79 start-page: 654 year: 2022 end-page: 665 ident: bib0054 article-title: Investigation of surface integrity transition of SiCp/Al composites based on specific cutting energy during ultrasonic elliptical vibration assisted cutting publication-title: J Manuf Process – volume: 26 start-page: 377 year: 2022 end-page: 395 ident: bib0059 article-title: Finite element simulation and experimental investigation of machining induced residual stresses in ultrasonic elliptical vibration-assisted turning publication-title: Mach Sci Technol – volume: 344 start-page: 38 year: 2015 end-page: 46 ident: bib0048 article-title: Subsurface defects structural evolution in nano-cutting of single crystal copper publication-title: Appl Surf Sci – volume: 1 start-page: 315 year: 1953 end-page: 319 ident: bib0067 article-title: The estimation of dislocation densities in metals from X-ray data publication-title: Acta Metal – volume: 177 year: 2022 ident: bib0065 article-title: The state of the art for numerical simulations of the effect of the microstructure and its evolution in the metal-cutting processes publication-title: Int J Mach Tools Manuf – volume: 10 start-page: 411 year: 2022 end-page: 427 ident: bib0055 article-title: Effects of process parameters on periodic impact force exerting on cutting tool in ultrasonic vibration-assisted oblique turning publication-title: Adv Manuf – volume: 123 start-page: 3943 year: 2022 end-page: 3953 ident: bib0004 article-title: Theoretical and numerical studies of surface microstructural transformation in ultrasonic elliptical vibration cutting tungsten heavy alloys publication-title: Int J Adv Manuf Technol – volume: 597 year: 2022 ident: bib0058 article-title: Revealing nanoscale material deformation mechanism and surface/subsurface characteristics in vibration-assisted nano-grinding of single-crystal iron publication-title: Appl Surf Sci – volume: 50 start-page: 321 year: 2021 end-page: 328 ident: bib0066 article-title: Study on surface integrity of tungsten alloy processed by ultrasonic elliptical vibration cutting publication-title: Surf Technol – volume: 106 start-page: 1397 year: 2020 end-page: 1407 ident: bib0025 article-title: Effect of ultrasonic elliptical vibration turning on the microscopic morphology of aluminum alloy surface publication-title: Int J Adv Manuf Technol – volume: 164 year: 2021 ident: bib0063 article-title: Surface integrity in metal machining-Part II: functional performance publication-title: Int J Mach Tools Manuf – volume: 13 start-page: 819 year: 2022 ident: bib0047 article-title: Study on the material removal mechanism of ultrasonic elliptical vibration cutting of medical beta titanium Alloy publication-title: Micromachines (Basel) – volume: 244 year: 2023 ident: bib0013 article-title: Molecular dynamics simulation on crystal defects of single-crystal silicon during elliptical vibration cutting publication-title: Int J Mech Sci – volume: 554 year: 2021 ident: bib0028 article-title: Effects of grinding speeds on the subsurface damage of single crystal silicon based on molecular dynamics simulations publication-title: Appl Surf Sci – volume: 227 year: 2022 ident: bib0061 article-title: Dislocation density based modelling of electrically assisted deformation process by finite element approach publication-title: Int J Mech Sci – volume: 151 year: 2020 ident: bib0017 article-title: Surface integrity and microstructure changes in 3D elliptical ultrasonic assisted turning of Ti-6Al-4V: FEM and experimental examination publication-title: Tribol Int – volume: 121 start-page: 3989 year: 2022 end-page: 3997 ident: bib0056 article-title: Study on the influence of fiber cutting angle on cutting force in ultrasonic assisted cutting CFRP disk publication-title: Int J Adv Manuf Technol – volume: 144 year: 2022 ident: bib0003 article-title: Effects of cutting force on formation of subsurface damage during nano-cutting of single-crystal tungsten publication-title: J Manuf Sci Eng-Trans ASME – volume: 225 year: 2022 ident: bib0039 article-title: Effects of tool geometry on tungsten removal behavior during nano-cutting publication-title: Int J Mech Sci – volume: 45 start-page: 15015 year: 2019 end-page: 15024 ident: bib0064 article-title: Strain-rate dependence of surface/subsurface deformation mechanisms during nanoscratching tests of GGG single crystal publication-title: Ceram Int – volume: 220 year: 2022 ident: bib0035 article-title: Numerical investigation on the temperature effect in nanometric cutting of polycrystalline silicon publication-title: Int J Mech Sci – volume: 110 start-page: 2035 year: 2020 end-page: 2047 ident: bib0023 article-title: Effect of cutting parameters on machinability of 7075-T651 aluminum alloy in different processing methods publication-title: Int J Adv Manuf Technol – volume: 33 start-page: 675 year: 2020 end-page: 685 ident: bib0046 article-title: On-line prediction of ultrasonic elliptical vibration cutting surface roughness of tungsten heavy alloy based on deep learning publication-title: J Intell Manuf – volume: 227 year: 2022 ident: bib0057 article-title: Material removal and surface generation in longitudinal-torsional ultrasonic assisted milling publication-title: Int J Mech Sci – volume: 204 year: 2021 ident: bib0001 article-title: In-situ TEM observation and MD simulation of the reaction and transformation of < 100 >loops in tungsten during H (+)(2) & He+ dual-beam irradiation publication-title: Scr Mater – volume: 50 start-page: 123 year: 2021 end-page: 133 ident: bib0026 article-title: Review on the corrosion behavior and coating protection of plasma facing materials publication-title: Surf Technol – volume: 192 year: 2020 ident: bib0014 article-title: Effect of ultrasonic elliptical vibration assistance on the surface layer defect of M-plane sapphire in microcutting publication-title: Mater Des – volume: 220 year: 2022 ident: bib0020 article-title: Precision-improving manufacturing produces ordered ultra-fine grained surface layer of tungsten heavy alloy through ultrasonic elliptical vibration cutting publication-title: Mater Des – volume: 191 year: 2020 ident: bib0053 article-title: Surface and sub-surface analysis of rotary ultrasonic elliptical end milling of Ti-6Al-4V publication-title: Mater Des – volume: 184 year: 2020 ident: bib0034 article-title: Nano-cutting mechanical properties and microstructure evolution mechanism of amorphous/single crystal alloy interface publication-title: Comput Mater Sci – volume: 311 year: 2022 ident: bib0012 article-title: Towards understanding the mechanism of vibration-assisted cutting of monocrystalline silicon by cyclic nanoindentation publication-title: J Mater Process Technol – volume: 83 start-page: 1025 year: 2016 end-page: 1036 ident: bib0022 article-title: Analysis and modeling of force in orthogonal elliptical vibration cutting publication-title: Int J Adv Manuf Technol – volume: 239 year: 2022 ident: bib0030 article-title: Molecular dynamics simulation of laser assisted grinding of GaN crystals publication-title: Int J Mech Sci – volume: 88 start-page: 131 year: 2014 end-page: 164 ident: bib0036 article-title: Diamond machining of silicon: a review of advances in molecular dynamics simulation publication-title: Int J Mach Tools Manuf – volume: 189 year: 2020 ident: bib0060 article-title: Microstructural evolution of soft magnetic 49Fe-49Co-2V alloy induced by drilling publication-title: Mater Des – volume: 64 start-page: 98 year: 2020 end-page: 107 ident: bib0016 article-title: Suppression of forced vibration due to chip segmentation in ultrasonic elliptical vibration cutting of titanium alloy Ti-6Al-4V publication-title: Precis. Eng-J Int Soc Precis Eng Nanotechnol – volume: 92 start-page: 147 year: 2023 end-page: 156 ident: bib0021 article-title: Effects of ultrasonic vibration cutting trajectories on chip formation of tungsten alloys publication-title: J Manuf Process – volume: 155 year: 2022 ident: bib0062 article-title: Orientation dependence of shock-induced change of habit plane for the 1/2<111>dislocation loop and plasticity in tungsten publication-title: Int J Plast – volume: 128 year: 2021 ident: bib0032 article-title: Study on subsurface damage mechanism of gallium nitride in nano-grinding publication-title: Mater Sci Semicond Process – volume: 11 start-page: 71 year: 2021 ident: bib0006 article-title: Grinding kinetics study of tungsten ore publication-title: Metals (Basel) – volume: 143 year: 2021 ident: bib0009 article-title: Development and optimization of ultrasonic elliptical vibration cutting device based on single excitation publication-title: J Manuf Sci Eng-Trans ASME – volume: 26 year: 2021 ident: bib0019 article-title: Research on the nanocutting mechanism of Ni-Fe-Cr-based superalloys: conventional cutting versus UEVC publication-title: Mater Today Commun – volume: 172 year: 2022 ident: bib0050 article-title: Phase transition and plastic deformation mechanisms induced by self-rotating grinding of GaN single crystals publication-title: Int J Mach Tools Manuf – volume: 65 start-page: 35 year: 2013 end-page: 42 ident: bib0018 article-title: Modeling of the effect of tool edge radius on surface generation in elliptical vibration cutting publication-title: Int J Adv Manuf Technol – volume: 5 year: 2022 ident: bib0051 article-title: Understand anisotropy dependence of damage evolution and material removal during nanoscratch of MgF2 single crystals publication-title: Int J Extreme Manuf – volume: 248 year: 2020 ident: bib0008 article-title: Sustainable production of dry-ultra-precision machining of Ti-6Al-4V alloy using PCD tool under ultrasonic elliptical vibration-assisted cutting publication-title: J Clean Prod – volume: 117 start-page: 43 year: 2016 end-page: 52 ident: bib0007 article-title: Study on predictive model of cutting force and geometry parameters for oblique elliptical vibration cutting publication-title: Int J Mech Sci – volume: 86 start-page: 1775 year: 2016 end-page: 1784 ident: bib0010 article-title: Prediction of critical cutting depth for ductile-brittle transition in ultrasonic vibration assisted grinding of optical glasses publication-title: Int J Adv Manuf Technol – volume: 578 year: 2021 ident: bib0031 article-title: Anisotropy dependence of material removal and deformation mechanisms during nanoscratch of gallium nitride single crystals on (0001) plane publication-title: Appl Surf Sci – volume: 47 start-page: 2358 year: 2021 end-page: 2366 ident: bib0042 article-title: Atomistic investigation of machinability of monocrystalline 3C-SiC in elliptical vibration-assisted diamond cutting publication-title: Ceram Int – volume: 588 year: 2022 ident: bib0037 article-title: Surface deformation, phase transition and dislocation mechanisms of single crystalline 6H-SiC in oblique nano-cutting publication-title: Appl Surf Sci – volume: 225 year: 2023 ident: bib0045 article-title: Strength and ductility enhancement of high-entropy FeCoNi2Al0.9 alloy by ultrasonically refining eutectic structures publication-title: Scr Mater – volume: 36 start-page: 68 year: 2019 end-page: 76 ident: bib0015 article-title: Ductile-regime machining model for ultrasonic elliptical vibration cutting of brittle materials publication-title: J Manuf Process – volume: 482 year: 2021 ident: bib0005 article-title: A comparative study on tool life and wear of uncoated and coated cutting tools in turning of tungsten heavy alloys publication-title: Wear – volume: 237 year: 2023 ident: bib0040 article-title: Effects of minimum uncut chip thickness on tungsten nano-cutting mechanism publication-title: Int J Mech Sci – volume: 162 year: 2021 ident: bib0070 article-title: Surface integrity in metal machining-Part I: fundamentals of surface characteristics and formation mechanism publication-title: Int J Mach Tools Manuf – volume: 214 year: 2022 ident: bib0033 article-title: The deformation mechanism of gallium-faces and nitrogen-faces gallium nitride during nanogrinding publication-title: Int J Mech Sci – volume: 608 year: 2023 ident: bib0068 article-title: Evolution and influence of GaN/AlN heterointerface during the thinning process of GaN film publication-title: Appl Surf Sci – volume: 556 year: 2021 ident: bib0029 article-title: Effects of initial temperature on the damage of GaN during nanogrinding publication-title: Appl Surf Sci – volume: 113 start-page: 1401 year: 2021 end-page: 1414 ident: bib0024 article-title: Effect of double-excitation ultrasonic elliptical vibration turning trajectory on surface morphology publication-title: Int J Adv Manuf Technol – volume: 57 start-page: 831 year: 2021 end-page: 844 ident: bib0027 article-title: A Review on the development of the heat sink of the fusion reactor divertor publication-title: Acta Metal Sin – volume: 15 start-page: 1115 year: 2022 end-page: 1129 ident: bib0052 article-title: Elliptic vibration assisted cutting of metal matrix composite reinforced by silicon carbide: an investigation of machining mechanisms and surface integrity publication-title: J Mater Res Technol-JMRT – volume: 156 year: 2020 ident: bib0011 article-title: Review of ultrasonic vibration-assisted machining in advanced materials publication-title: Int J Mach Tools Manuf – volume: 526 year: 2020 ident: bib0038 article-title: Study on subsurface layer of nano-cutting single crystal tungsten in different orientations publication-title: Appl Surf Sci – volume: 64 year: 2001 ident: bib0041 article-title: Second nearest-neighbor modified embedded atom method potentials for bcc transition metals publication-title: Phys Rev B – volume: 155 year: 2022 ident: 10.1016/j.ijmecsci.2023.108397_bib0062 article-title: Orientation dependence of shock-induced change of habit plane for the 1/2<111>dislocation loop and plasticity in tungsten publication-title: Int J Plast doi: 10.1016/j.ijplas.2022.103329 – volume: 248 year: 2020 ident: 10.1016/j.ijmecsci.2023.108397_bib0008 article-title: Sustainable production of dry-ultra-precision machining of Ti-6Al-4V alloy using PCD tool under ultrasonic elliptical vibration-assisted cutting publication-title: J Clean Prod doi: 10.1016/j.jclepro.2019.119254 – volume: 65 start-page: 35 year: 2013 ident: 10.1016/j.ijmecsci.2023.108397_bib0018 article-title: Modeling of the effect of tool edge radius on surface generation in elliptical vibration cutting publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-012-4146-8 – volume: 47 start-page: 2358 year: 2021 ident: 10.1016/j.ijmecsci.2023.108397_bib0042 article-title: Atomistic investigation of machinability of monocrystalline 3C-SiC in elliptical vibration-assisted diamond cutting publication-title: Ceram Int doi: 10.1016/j.ceramint.2020.09.078 – volume: 526 year: 2020 ident: 10.1016/j.ijmecsci.2023.108397_bib0038 article-title: Study on subsurface layer of nano-cutting single crystal tungsten in different orientations publication-title: Appl Surf Sci doi: 10.1016/j.apsusc.2020.146608 – volume: 97 start-page: 1397 year: 2018 ident: 10.1016/j.ijmecsci.2023.108397_bib0044 article-title: A novel ultrasonic elliptical vibration cutting device based on a sandwiched and symmetrical structure publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-018-2015-9 – volume: 597 year: 2022 ident: 10.1016/j.ijmecsci.2023.108397_bib0058 article-title: Revealing nanoscale material deformation mechanism and surface/subsurface characteristics in vibration-assisted nano-grinding of single-crystal iron publication-title: Appl Surf Sci doi: 10.1016/j.apsusc.2022.153692 – volume: 143 year: 2021 ident: 10.1016/j.ijmecsci.2023.108397_bib0009 article-title: Development and optimization of ultrasonic elliptical vibration cutting device based on single excitation publication-title: J Manuf Sci Eng-Trans ASME doi: 10.1115/1.4049965 – volume: 1 start-page: 315 year: 1953 ident: 10.1016/j.ijmecsci.2023.108397_bib0067 article-title: The estimation of dislocation densities in metals from X-ray data publication-title: Acta Metal doi: 10.1016/0001-6160(53)90106-0 – volume: 52 start-page: 12 year: 2020 ident: 10.1016/j.ijmecsci.2023.108397_bib0043 article-title: A novel investigation on horizontal and 3D elliptical ultrasonic vibrations in rotary ultrasonic surface machining of carbon fiber reinforced plastic composites publication-title: J Manuf Process doi: 10.1016/j.jmapro.2020.01.027 – volume: 50 start-page: 321 year: 2021 ident: 10.1016/j.ijmecsci.2023.108397_bib0066 article-title: Study on surface integrity of tungsten alloy processed by ultrasonic elliptical vibration cutting publication-title: Surf Technol – volume: 10 start-page: 411 year: 2022 ident: 10.1016/j.ijmecsci.2023.108397_bib0055 article-title: Effects of process parameters on periodic impact force exerting on cutting tool in ultrasonic vibration-assisted oblique turning publication-title: Adv Manuf doi: 10.1007/s40436-022-00398-x – volume: 177 year: 2022 ident: 10.1016/j.ijmecsci.2023.108397_bib0065 article-title: The state of the art for numerical simulations of the effect of the microstructure and its evolution in the metal-cutting processes publication-title: Int J Mach Tools Manuf doi: 10.1016/j.ijmachtools.2022.103890 – volume: 239 year: 2022 ident: 10.1016/j.ijmecsci.2023.108397_bib0030 article-title: Molecular dynamics simulation of laser assisted grinding of GaN crystals publication-title: Int J Mech Sci – volume: 151 year: 2020 ident: 10.1016/j.ijmecsci.2023.108397_bib0017 article-title: Surface integrity and microstructure changes in 3D elliptical ultrasonic assisted turning of Ti-6Al-4V: FEM and experimental examination publication-title: Tribol Int doi: 10.1016/j.triboint.2020.106492 – volume: 220 year: 2022 ident: 10.1016/j.ijmecsci.2023.108397_bib0035 article-title: Numerical investigation on the temperature effect in nanometric cutting of polycrystalline silicon publication-title: Int J Mech Sci doi: 10.1016/j.ijmecsci.2022.107172 – volume: 237 year: 2023 ident: 10.1016/j.ijmecsci.2023.108397_bib0040 article-title: Effects of minimum uncut chip thickness on tungsten nano-cutting mechanism publication-title: Int J Mech Sci doi: 10.1016/j.ijmecsci.2022.107790 – volume: 482 year: 2021 ident: 10.1016/j.ijmecsci.2023.108397_bib0005 article-title: A comparative study on tool life and wear of uncoated and coated cutting tools in turning of tungsten heavy alloys publication-title: Wear – volume: 214 year: 2022 ident: 10.1016/j.ijmecsci.2023.108397_bib0033 article-title: The deformation mechanism of gallium-faces and nitrogen-faces gallium nitride during nanogrinding publication-title: Int J Mech Sci doi: 10.1016/j.ijmecsci.2021.106888 – volume: 83 start-page: 1025 year: 2016 ident: 10.1016/j.ijmecsci.2023.108397_bib0022 article-title: Analysis and modeling of force in orthogonal elliptical vibration cutting publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-015-7645-6 – volume: 33 start-page: 675 year: 2020 ident: 10.1016/j.ijmecsci.2023.108397_bib0046 article-title: On-line prediction of ultrasonic elliptical vibration cutting surface roughness of tungsten heavy alloy based on deep learning publication-title: J Intell Manuf doi: 10.1007/s10845-020-01669-9 – volume: 106 start-page: 1397 year: 2020 ident: 10.1016/j.ijmecsci.2023.108397_bib0025 article-title: Effect of ultrasonic elliptical vibration turning on the microscopic morphology of aluminum alloy surface publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-019-04463-x – volume: 50 start-page: 123 year: 2021 ident: 10.1016/j.ijmecsci.2023.108397_bib0026 article-title: Review on the corrosion behavior and coating protection of plasma facing materials publication-title: Surf Technol – volume: 5 year: 2022 ident: 10.1016/j.ijmecsci.2023.108397_bib0051 article-title: Understand anisotropy dependence of damage evolution and material removal during nanoscratch of MgF2 single crystals publication-title: Int J Extreme Manuf – volume: 191 year: 2020 ident: 10.1016/j.ijmecsci.2023.108397_bib0053 article-title: Surface and sub-surface analysis of rotary ultrasonic elliptical end milling of Ti-6Al-4V publication-title: Mater Des doi: 10.1016/j.matdes.2020.108658 – volume: 227 year: 2022 ident: 10.1016/j.ijmecsci.2023.108397_bib0057 article-title: Material removal and surface generation in longitudinal-torsional ultrasonic assisted milling publication-title: Int J Mech Sci doi: 10.1016/j.ijmecsci.2022.107375 – volume: 117 start-page: 43 year: 2016 ident: 10.1016/j.ijmecsci.2023.108397_bib0007 article-title: Study on predictive model of cutting force and geometry parameters for oblique elliptical vibration cutting publication-title: Int J Mech Sci doi: 10.1016/j.ijmecsci.2016.08.004 – volume: 11 start-page: 71 year: 2021 ident: 10.1016/j.ijmecsci.2023.108397_bib0006 article-title: Grinding kinetics study of tungsten ore publication-title: Metals (Basel) doi: 10.3390/met11010071 – volume: 227 year: 2022 ident: 10.1016/j.ijmecsci.2023.108397_bib0061 article-title: Dislocation density based modelling of electrically assisted deformation process by finite element approach publication-title: Int J Mech Sci doi: 10.1016/j.ijmecsci.2022.107433 – volume: 26 start-page: 377 year: 2022 ident: 10.1016/j.ijmecsci.2023.108397_bib0059 article-title: Finite element simulation and experimental investigation of machining induced residual stresses in ultrasonic elliptical vibration-assisted turning publication-title: Mach Sci Technol doi: 10.1080/10910344.2022.2129980 – volume: 123 start-page: 3943 year: 2022 ident: 10.1016/j.ijmecsci.2023.108397_bib0004 article-title: Theoretical and numerical studies of surface microstructural transformation in ultrasonic elliptical vibration cutting tungsten heavy alloys publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-022-10293-1 – volume: 121 start-page: 3989 year: 2022 ident: 10.1016/j.ijmecsci.2023.108397_bib0056 article-title: Study on the influence of fiber cutting angle on cutting force in ultrasonic assisted cutting CFRP disk publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-022-09494-5 – volume: 162 year: 2021 ident: 10.1016/j.ijmecsci.2023.108397_bib0070 article-title: Surface integrity in metal machining-Part I: fundamentals of surface characteristics and formation mechanism publication-title: Int J Mach Tools Manuf doi: 10.1016/j.ijmachtools.2020.103687 – volume: 128 year: 2021 ident: 10.1016/j.ijmecsci.2023.108397_bib0032 article-title: Study on subsurface damage mechanism of gallium nitride in nano-grinding publication-title: Mater Sci Semicond Process doi: 10.1016/j.mssp.2021.105760 – volume: 220 year: 2022 ident: 10.1016/j.ijmecsci.2023.108397_bib0020 article-title: Precision-improving manufacturing produces ordered ultra-fine grained surface layer of tungsten heavy alloy through ultrasonic elliptical vibration cutting publication-title: Mater Des doi: 10.1016/j.matdes.2022.110859 – volume: 26 year: 2021 ident: 10.1016/j.ijmecsci.2023.108397_bib0019 article-title: Research on the nanocutting mechanism of Ni-Fe-Cr-based superalloys: conventional cutting versus UEVC publication-title: Mater Today Commun – volume: 244 year: 2023 ident: 10.1016/j.ijmecsci.2023.108397_bib0013 article-title: Molecular dynamics simulation on crystal defects of single-crystal silicon during elliptical vibration cutting publication-title: Int J Mech Sci doi: 10.1016/j.ijmecsci.2022.108072 – volume: 110 start-page: 2035 year: 2020 ident: 10.1016/j.ijmecsci.2023.108397_bib0023 article-title: Effect of cutting parameters on machinability of 7075-T651 aluminum alloy in different processing methods publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-020-05939-x – volume: 64 start-page: 98 year: 2020 ident: 10.1016/j.ijmecsci.2023.108397_bib0016 article-title: Suppression of forced vibration due to chip segmentation in ultrasonic elliptical vibration cutting of titanium alloy Ti-6Al-4V publication-title: Precis. Eng-J Int Soc Precis Eng Nanotechnol – volume: 64 year: 2001 ident: 10.1016/j.ijmecsci.2023.108397_bib0041 article-title: Second nearest-neighbor modified embedded atom method potentials for bcc transition metals publication-title: Phys Rev B doi: 10.1103/PhysRevB.64.184102 – volume: 36 start-page: 68 year: 2019 ident: 10.1016/j.ijmecsci.2023.108397_bib0015 article-title: Ductile-regime machining model for ultrasonic elliptical vibration cutting of brittle materials publication-title: J Manuf Process doi: 10.1016/j.jmapro.2018.09.029 – volume: 608 year: 2023 ident: 10.1016/j.ijmecsci.2023.108397_bib0068 article-title: Evolution and influence of GaN/AlN heterointerface during the thinning process of GaN film publication-title: Appl Surf Sci doi: 10.1016/j.apsusc.2022.155151 – volume: 57 start-page: 831 year: 2021 ident: 10.1016/j.ijmecsci.2023.108397_bib0027 article-title: A Review on the development of the heat sink of the fusion reactor divertor publication-title: Acta Metal Sin – volume: 12 start-page: 2218 year: 2021 ident: 10.1016/j.ijmecsci.2023.108397_bib0002 article-title: Timely and atomic-resolved high-temperature mechanical investigation of ductile fracture and atomistic mechanisms of tungsten publication-title: Nat Commun doi: 10.1038/s41467-021-22447-y – volume: 578 year: 2021 ident: 10.1016/j.ijmecsci.2023.108397_bib0031 article-title: Anisotropy dependence of material removal and deformation mechanisms during nanoscratch of gallium nitride single crystals on (0001) plane publication-title: Appl Surf Sci – volume: 554 year: 2021 ident: 10.1016/j.ijmecsci.2023.108397_bib0028 article-title: Effects of grinding speeds on the subsurface damage of single crystal silicon based on molecular dynamics simulations publication-title: Appl Surf Sci doi: 10.1016/j.apsusc.2021.149668 – volume: 189 year: 2020 ident: 10.1016/j.ijmecsci.2023.108397_bib0060 article-title: Microstructural evolution of soft magnetic 49Fe-49Co-2V alloy induced by drilling publication-title: Mater Des doi: 10.1016/j.matdes.2020.108501 – volume: 113 start-page: 1401 year: 2021 ident: 10.1016/j.ijmecsci.2023.108397_bib0024 article-title: Effect of double-excitation ultrasonic elliptical vibration turning trajectory on surface morphology publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-021-06684-5 – volume: 156 year: 2020 ident: 10.1016/j.ijmecsci.2023.108397_bib0011 article-title: Review of ultrasonic vibration-assisted machining in advanced materials publication-title: Int J Mach Tools Manuf doi: 10.1016/j.ijmachtools.2020.103594 – volume: 225 year: 2022 ident: 10.1016/j.ijmecsci.2023.108397_bib0039 article-title: Effects of tool geometry on tungsten removal behavior during nano-cutting publication-title: Int J Mech Sci doi: 10.1016/j.ijmecsci.2022.107384 – volume: 172 year: 2022 ident: 10.1016/j.ijmecsci.2023.108397_bib0050 article-title: Phase transition and plastic deformation mechanisms induced by self-rotating grinding of GaN single crystals publication-title: Int J Mach Tools Manuf doi: 10.1016/j.ijmachtools.2021.103827 – volume: 144 year: 2022 ident: 10.1016/j.ijmecsci.2023.108397_bib0003 article-title: Effects of cutting force on formation of subsurface damage during nano-cutting of single-crystal tungsten publication-title: J Manuf Sci Eng-Trans ASME doi: 10.1115/1.4054839 – volume: 45 start-page: 15015 year: 2019 ident: 10.1016/j.ijmecsci.2023.108397_bib0064 article-title: Strain-rate dependence of surface/subsurface deformation mechanisms during nanoscratching tests of GGG single crystal publication-title: Ceram Int doi: 10.1016/j.ceramint.2019.04.238 – volume: 15 start-page: 1115 year: 2022 ident: 10.1016/j.ijmecsci.2023.108397_bib0052 article-title: Elliptic vibration assisted cutting of metal matrix composite reinforced by silicon carbide: an investigation of machining mechanisms and surface integrity publication-title: J Mater Res Technol-JMRT doi: 10.1016/j.jmrt.2021.08.096 – volume: 13 start-page: 819 year: 2022 ident: 10.1016/j.ijmecsci.2023.108397_bib0047 article-title: Study on the material removal mechanism of ultrasonic elliptical vibration cutting of medical beta titanium Alloy publication-title: Micromachines (Basel) doi: 10.3390/mi13060819 – volume: 192 year: 2020 ident: 10.1016/j.ijmecsci.2023.108397_bib0014 article-title: Effect of ultrasonic elliptical vibration assistance on the surface layer defect of M-plane sapphire in microcutting publication-title: Mater Des doi: 10.1016/j.matdes.2020.108755 – volume: 88 start-page: 131 year: 2014 ident: 10.1016/j.ijmecsci.2023.108397_bib0036 article-title: Diamond machining of silicon: a review of advances in molecular dynamics simulation publication-title: Int J Mach Tools Manuf doi: 10.1016/j.ijmachtools.2014.09.013 – volume: 311 year: 2022 ident: 10.1016/j.ijmecsci.2023.108397_bib0012 article-title: Towards understanding the mechanism of vibration-assisted cutting of monocrystalline silicon by cyclic nanoindentation publication-title: J Mater Process Technol – volume: 183 year: 2020 ident: 10.1016/j.ijmecsci.2023.108397_bib0049 article-title: Study on nano-cutting of brittle material by molecular dynamics using dynamic modeling publication-title: Comput Mater Sci doi: 10.1016/j.commatsci.2020.109851 – volume: 556 year: 2021 ident: 10.1016/j.ijmecsci.2023.108397_bib0029 article-title: Effects of initial temperature on the damage of GaN during nanogrinding publication-title: Appl Surf Sci doi: 10.1016/j.apsusc.2021.149771 – volume: 131 year: 2021 ident: 10.1016/j.ijmecsci.2023.108397_bib0069 article-title: Machining mechanism and deformation behavior of high-entropy alloy under elliptical vibration cutting publication-title: Intermetallics doi: 10.1016/j.intermet.2020.107079 – volume: 225 year: 2023 ident: 10.1016/j.ijmecsci.2023.108397_bib0045 article-title: Strength and ductility enhancement of high-entropy FeCoNi2Al0.9 alloy by ultrasonically refining eutectic structures publication-title: Scr Mater doi: 10.1016/j.scriptamat.2022.115154 – volume: 92 start-page: 147 year: 2023 ident: 10.1016/j.ijmecsci.2023.108397_bib0021 article-title: Effects of ultrasonic vibration cutting trajectories on chip formation of tungsten alloys publication-title: J Manuf Process doi: 10.1016/j.jmapro.2023.02.053 – volume: 164 year: 2021 ident: 10.1016/j.ijmecsci.2023.108397_bib0063 article-title: Surface integrity in metal machining-Part II: functional performance publication-title: Int J Mach Tools Manuf doi: 10.1016/j.ijmachtools.2021.103718 – volume: 184 year: 2020 ident: 10.1016/j.ijmecsci.2023.108397_bib0034 article-title: Nano-cutting mechanical properties and microstructure evolution mechanism of amorphous/single crystal alloy interface publication-title: Comput Mater Sci doi: 10.1016/j.commatsci.2020.109915 – volume: 86 start-page: 1775 year: 2016 ident: 10.1016/j.ijmecsci.2023.108397_bib0010 article-title: Prediction of critical cutting depth for ductile-brittle transition in ultrasonic vibration assisted grinding of optical glasses publication-title: Int J Adv Manuf Technol doi: 10.1007/s00170-015-8274-9 – volume: 79 start-page: 654 year: 2022 ident: 10.1016/j.ijmecsci.2023.108397_bib0054 article-title: Investigation of surface integrity transition of SiCp/Al composites based on specific cutting energy during ultrasonic elliptical vibration assisted cutting publication-title: J Manuf Process doi: 10.1016/j.jmapro.2022.04.067 – volume: 588 year: 2022 ident: 10.1016/j.ijmecsci.2023.108397_bib0037 article-title: Surface deformation, phase transition and dislocation mechanisms of single crystalline 6H-SiC in oblique nano-cutting publication-title: Appl Surf Sci doi: 10.1016/j.apsusc.2022.152944 – volume: 344 start-page: 38 year: 2015 ident: 10.1016/j.ijmecsci.2023.108397_bib0048 article-title: Subsurface defects structural evolution in nano-cutting of single crystal copper publication-title: Appl Surf Sci doi: 10.1016/j.apsusc.2015.03.061 – volume: 204 year: 2021 ident: 10.1016/j.ijmecsci.2023.108397_bib0001 article-title: In-situ TEM observation and MD simulation of the reaction and transformation of < 100 >loops in tungsten during H (+)(2) & He+ dual-beam irradiation publication-title: Scr Mater doi: 10.1016/j.scriptamat.2021.114154 |
| SSID | ssj0017053 |
| Score | 2.5373344 |
| Snippet | •Dislocation, amorphous and nanocrystal are the mechanisms of plastic deformation of tungsten.•Tungsten surface forms nanocrystals under UEVC compared with... |
| SourceID | crossref elsevier |
| SourceType | Enrichment Source Index Database Publisher |
| StartPage | 108397 |
| SubjectTerms | Body-centered cubic tungsten Deformation mechanism Microstructure evolution mechanism Molecular dynamics Stress induction Ultrasonic elliptical vibration cutting |
| Title | Microstructure evolution mechanism of tungsten induced by ultrasonic elliptical vibration cutting at atomic/nano scale |
| URI | https://dx.doi.org/10.1016/j.ijmecsci.2023.108397 |
| Volume | 253 |
| WOSCitedRecordID | wos000989012900001&url=https%3A%2F%2Fcvtisr.summon.serialssolutions.com%2F%23%21%2Fsearch%3Fho%3Df%26include.ft.matches%3Dt%26l%3Dnull%26q%3D |
| hasFullText | 1 |
| inHoldings | 1 |
| isFullTextHit | |
| isPrint | |
| journalDatabaseRights | – providerCode: PRVESC databaseName: Elsevier SD Freedom Collection Journals 2021 customDbUrl: eissn: 1879-2162 dateEnd: 99991231 omitProxy: false ssIdentifier: ssj0017053 issn: 0020-7403 databaseCode: AIEXJ dateStart: 19950101 isFulltext: true titleUrlDefault: https://www.sciencedirect.com providerName: Elsevier |
| link | http://cvtisr.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwtV1bb9MwFLZKxwM8IK5i3OQH3qZsbi6-PE5oaICYEBqiPEWOY0stJa3WNio_Zf9258RO0sKkgRAvUWTFceLz-Xb8nc-EvOYw5BiRqUg4K6M0ScuocI5HQjKHWjJZUbLmsAlxdibHY_VpMLhsY2HqmagqudmoxX81NaSBsTF09i_M3b0UEuAejA5XMDtc_8jwH5Fi52VhcXPA1qG0gx8Wo3zxUAzkBUAjBwMjz7FcGz8NXc9WF3rZHImDMp0L7-aucUHdvMCsPUlaYwgkRjOjqKqu5gdLeG6HUrTrZ9xSpwjf0IVimp7C-DV4rk_1vBsFQtJnW33vd_9149391sO6zflBTzbrkBwcGXHSMbWCd62NsOnpTD7agEUiZb4TtL6TlkJF8Wi3F4-95vBvI4J3TkwPJ1P4Q_izQywamZWJ5wX_oraNm9cMy4OlGcOh-hbZiwHLckj2jt-djN93W1SCBYnT8IFb4efXl3b9zGdrNnN-n9wLyxB67OHzgAxs9ZDc3RKnfETqXSDRDki0AxKdO9oCiQYg0eIn7YFEeyDRDkg0AInqFfVAOkIY0QZGj8mXtyfnb06jcEpHZJJRvIpUoVWpkkJyp12WCctlwaQrC65gqm0kM4mAjsKKpIiLRDlXWq7KUWZTblKrZfKEDKt5ZZ8SylOdMudix22awjpcGu5EaZjgxtkyTvZJ1tZgboKEPZ6kMstbruI0b2s-x5rPfc3vk6Mu38KLuNyYQ7UGykNz8FPMHHB1Q95n_5D3ObnTN40XZAg2ti_JbVOvJsuLVwGCV1vducI |
| linkProvider | Elsevier |
| openUrl | ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Microstructure+evolution+mechanism+of+tungsten+induced+by+ultrasonic+elliptical+vibration+cutting+at+atomic%2Fnano+scale&rft.jtitle=International+journal+of+mechanical+sciences&rft.au=Wang%2C+Hao&rft.au=Kang%2C+Renke&rft.au=Bao%2C+Yan&rft.au=Wang%2C+Kaixuan&rft.date=2023-09-01&rft.pub=Elsevier+Ltd&rft.issn=0020-7403&rft.eissn=1879-2162&rft.volume=253&rft_id=info:doi/10.1016%2Fj.ijmecsci.2023.108397&rft.externalDocID=S0020740323002990 |
| thumbnail_l | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=0020-7403&client=summon |
| thumbnail_m | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=0020-7403&client=summon |
| thumbnail_s | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=0020-7403&client=summon |