Feasibility Study of the Mechanical Cooler System for LiteBIRD

LiteBIRD is the second strategic large-class mission of JAXA aiming to test inflation models. In this mission, cryogenic telescopes and low-temperature scientific instruments are needed to provide high-sensitivity. A mechanical cooler system will cool these telescopes to 5 K or lower, using the 4K-c...

Celý popis

Uložené v:
Podrobná bibliografia
Vydané v:Cryogenics (Guildford) Ročník 152; s. 104216
Hlavní autori: Shinozaki, Keisuke, Odagiri, Kimihide, Yoshihara, Keisuke, Sekimoto, Yutaro, Dotani, Tadayasu, Fujimoto, Ryuichi, Narasaki, Katsuhiro, Yoshida, Seiji, Tsunematsu, Shoji, Isshiki, Masahito, Kanao, Kenichi
Médium: Journal Article
Jazyk:English
Vydavateľské údaje: Elsevier Ltd 15.12.2025
Predmet:
Cryogenics
Joule Thomson
LiteBIRD
Mechanical cooler
Stirling
Joule Thomson
Stirling
Mechanical cooler
Cryogenics
LiteBIRD
ISSN:0011-2275
On-line prístup:Získať plný text
Tagy: Pridať tag
Žiadne tagy, Buďte prvý, kto otaguje tento záznam!
Popis
Shrnutí:LiteBIRD is the second strategic large-class mission of JAXA aiming to test inflation models. In this mission, cryogenic telescopes and low-temperature scientific instruments are needed to provide high-sensitivity. A mechanical cooler system will cool these telescopes to 5 K or lower, using the 4K-class Joule Thomson cooler (4K-JT) that provides 4.5 K and the 2K Joule Thomson cooler (2K-JT) that provides 1.7 K, which serve as the precoolers of the multistage adiabatic demagnetization refrigerator (ADR). The 20K-class double-stage Stirling coolers (2ST) are also used as precoolers for the JT coolers and shield coolers. This paper presents a feasibility study of the mechanical cooler system and the status of these cooler developments. •A cryogen-free mechanical cooler system is proposed for the LiteBIRD payload module.•The 4K-JT provides 4.5 K and the 2K-JT provides 1.7 K.•The heat exchanger length is proposed based on the cooling performance test.•The heater control is needed at the 2K-JT cold tip and the 1.75 K stage to satisfy a required temperature stability.•The 2ST compressor was upgraded to prevent a mechanical wear and reduce a vibration levels.
ISSN:0011-2275
DOI:10.1016/j.cryogenics.2025.104216