3D simulation of a ballistic direct injection cycle for the assessment of fuel property effects on cavitating injector internal flow dynamics and primary breakup

The fuel property effect on a high-pressure ballistic injection cycle is studied by n-dodecane and n-heptane because these pure fuels have well-known and well-specified properties. Distinct differences between both fuels are worked out for a ballistic injection cycle by dynamic 3D flow simulations....

Celý popis

Uloženo v:
Podrobná bibliografie
Vydáno v:Fuel (Guildford) Ročník 308; s. 121775
Hlavní autoři: Schwarz, Philip, Blume, Martin, Weiß, Lukas, Wensing, Michael, Skoda, Romuald
Médium: Journal Article
Jazyk:angličtina
Vydáno: Kidlington Elsevier Ltd 15.01.2022
Elsevier BV
Témata:
Atomization
Cavitation
Computational grids
Computer applications
Density
Dodecane
Flow simulation
Fluid flow
Fuels
Gas mixtures
Heptanes
Hysteresis
Injection
Injectors
Internal flow
Large eddy simulation
Laser induced fluorescence
Ligaments
n-dodecane
n-heptane
Pressure effects
Simulation
Three dimensional flow
Transient hysteresis
Turbulent flow
Viscosity
Transient hysteresis
n-dodecane
Atomization
Cavitation
n-heptane
Large-eddy simulation
ISSN:0016-2361, 1873-7153
On-line přístup:Získat plný text
Tagy: Přidat tag
Žádné tagy, Buďte první, kdo vytvoří štítek k tomuto záznamu!
Popis
Shrnutí:The fuel property effect on a high-pressure ballistic injection cycle is studied by n-dodecane and n-heptane because these pure fuels have well-known and well-specified properties. Distinct differences between both fuels are worked out for a ballistic injection cycle by dynamic 3D flow simulations. A two-phase volume of fluid Euler–Euler method for gas mixture is utilized to capture both cavitation and primary breakup in a seamless simulation of injector internal flow and near-nozzle spray. The split-off of primary ligaments is directly resolved down to the available grid limit in computational grid with about 100 million cells. A large-eddy simulation is employed. The simulation results are complemented by laser-induced fluorescence measurements of the spray’s near field. The spray head exhibits a mushroom shape for n-dodecane during the early opening phase, while a more complex and unstable misty initial spray head, which is attributed to lower density and viscosity, is observed for n-heptane. For high needle lift, the intensity of string cavitation is lower for n-dodecane due to its larger density and viscosity. During the opening phase, highly unsteady turbulent vortex and cavitation structures are generated. For n-dodecane, these structures survive far into the closing phase. This behavior is attributed to an inertia effect due to the larger density. This hysteresis is also observed for the ligament velocity, which still increases during the early closing phase. For n-heptane, the hysteresis is much less pronounced and ligament velocities are higher due to the lower density. •Cavitation and primary breakup are treated simultaneously in a seamless simulation.•Effect of in-nozzle flow on subsequent flow physics is illustrated.•Shape of spray head is density- and viscosity-dependent.•Different structures occur in opening and closing phase (fuel-dependent hysteresis).•High fuel density promotes survival of structures from opening into closing phase.
Bibliografie:ObjectType-Article-1
SourceType-Scholarly Journals-1
ObjectType-Feature-2
content type line 14
ISSN:0016-2361
1873-7153
DOI:10.1016/j.fuel.2021.121775