A new twisted differential line structure in global bus design

Twisted differential line structure can effectively reduce crosstalk noise on global bus, which foresees a wide applicability. However, measured performance based on fabricated circuits is much worse than simulated performance based on the layout. It is suspected that the via resistance variation is...

Celý popis

Uložené v:
Podrobná bibliografia
Vydané v:2007 44th ACM/IEEE Design Automation Conference s. 180 - 183
Hlavní autori: Jiang, Zhanyuan, Hu, Shiyan, Shi, Weiping
Médium: Konferenčný príspevok..
Jazyk:English
Vydavateľské údaje: New York, NY, USA ACM 04.06.2007
IEEE
Edícia:ACM Conferences
Predmet:
Algorithm
Algorithm design and analysis
Circuit simulation
Crosstalk
Design
Differential line
Distortion measurement
Electrical resistance measurement
Frequency synchronization
Global bus
Hardware > Hardware validation
Noise reduction
Performance analysis
Permission
Redundant via
Reliability
Very large scale integration
redundant via
differential line
global bus
ISBN:1595936270, 9781595936271
ISSN:0738-100X
On-line prístup:Získať plný text
Tagy: Pridať tag
Žiadne tagy, Buďte prvý, kto otaguje tento záznam!
Popis
Shrnutí:Twisted differential line structure can effectively reduce crosstalk noise on global bus, which foresees a wide applicability. However, measured performance based on fabricated circuits is much worse than simulated performance based on the layout. It is suspected that the via resistance variation is the cause. In this paper, our extensive simulation confirm this. A new redundant via insertion technique is proposed to reduce via variation and signal distortion. In addition, a new buffer insertion technique is proposed to synchronize the transmitted signals, thus further improving the effectiveness of the twisted differential line. Experimental results demonstrate that the new approaches are highly effective. Under a realistic setup, a 6GHz signal can be transmitted with high fidelity using the new approaches. In contrast, only a 100MHz signal can be reliably transmitted using a single-end model with power/ground shielding. In addition, compared to conventional twisted differential line structure, our new techniques can reduce the magnitude of noise by 45%. Furthermore, compared to unbuffered twisted differential line structure, the maximum signal phase difference is reduced from 37ps to 7ps by the new buffer insertion technique.
Bibliografia:SourceType-Conference Papers & Proceedings-1
ObjectType-Conference Paper-1
content type line 25
ISBN:1595936270
9781595936271
ISSN:0738-100X
DOI:10.1145/1278480.1278524