Zobraziť v EDS

Aerodynamic forces on novel tetra-shaped solar panels mounted on flat roof: first insights from field measurements

Uložené v:
Podrobná bibliografia
Názov: Aerodynamic forces on novel tetra-shaped solar panels mounted on flat roof: first insights from field measurements
Autori: Radhakrishnan Jayakumari, Anjali, Gillmeier, Stefanie
Informácie o vydavateľovi: 2025.
Rok vydania: 2025
Predmety: wind effects, flat roof-mounted solar panel, SDG 7 - Affordable and Clean Energy, aerodynamic lift, SDG 7 – Betaalbare en schone energie
Popis: The increasing demand for clean energy necessitates innovations in renewable energy technologies to enhance both performance and cost efficiency. A novel lightweight tetra-shaped solar panel has been developed. This study examines the aerodynamic performance of this design through a field measurement campaign. A 4x4 configuration of tetra-shaped panels was installed on the flat roof of a high-rise building to analyse the aerodynamic lift forces acting on the panels under varying wind conditions. Wind speed and direction at the location, along with the resulting pressures on the upper and lower surfaces of the panels, were measured simultaneously to assess the resulting lift forces. The first results indicate that the innovative tetra design seems to exhibit relatively low average lift forces across various wind speeds and directions, while peak lift forces increase with wind speed.
Druh dokumentu: Conference object
Jazyk: English
Prístupová URL adresa: https://research.tue.nl/en/publications/2b787e9b-e594-4485-8df4-60690ba4bd80
Prístupové číslo: edsair.dris...01180..78bd425214b51fec5a0cceac0a7cbff6
Databáza: OpenAIRE
Popis
Abstrakt:The increasing demand for clean energy necessitates innovations in renewable energy technologies to enhance both performance and cost efficiency. A novel lightweight tetra-shaped solar panel has been developed. This study examines the aerodynamic performance of this design through a field measurement campaign. A 4x4 configuration of tetra-shaped panels was installed on the flat roof of a high-rise building to analyse the aerodynamic lift forces acting on the panels under varying wind conditions. Wind speed and direction at the location, along with the resulting pressures on the upper and lower surfaces of the panels, were measured simultaneously to assess the resulting lift forces. The first results indicate that the innovative tetra design seems to exhibit relatively low average lift forces across various wind speeds and directions, while peak lift forces increase with wind speed.