Reproducibility of Areal Topography Parameters Obtained by Atomic Force Microscope
Uloženo v:
| Název: | Reproducibility of Areal Topography Parameters Obtained by Atomic Force Microscope |
|---|---|
| Autoři: | Razumić, Andrej, Runje, Biserka, Keran, Zdenka, Trzun, Zvonko, Pugar, Daniel |
| Zdroj: | Tehnički Glasnik, Vol 19, Iss si1, Pp 1-6 (2025) Tehnički glasnik Volume 19 Issue si1 |
| Informace o vydavateli: | University North, 2025. |
| Rok vydání: | 2025 |
| Témata: | Technology, atomic force microscope, areal topography parameters, reproducibility, Industry 5.0, quality management |
| Popis: | In the context of quality management and Industry 5.0, reproducibility is a critical indicator of the ability to achieve consistent and predictable results in laboratories, research, as well as in systems and processes. Reproducibility is also an indispensable component of measurement uncertainty, which quantifies the precision of measurement results. To standardize the measurement procedure for surface topography parameters obtained using atomic force microscope (AFM) and to establish the accuracy and precision of measurement results, an analysis of repeatability and reproducibility was conducted in accordance with the ISO 5725-2:2019 standard, Accuracy (trueness and precision) of measurement methods and results – Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method. Measurements were performed on two AFM standards and a steel sample. The research was conducted over the course of one year and repeated after four years using the same samples. |
| Druh dokumentu: | Article |
| Popis souboru: | application/pdf |
| ISSN: | 1848-5588 1846-6168 |
| DOI: | 10.31803/tg-20250324183037 |
| Přístupová URL adresa: | https://doaj.org/article/aeaec1417c794920aa528b34fe7d32ea |
| Přístupové číslo: | edsair.doi.dedup.....81018fa8a3996ea957ddb47d5b65d9f7 |
| Databáze: | OpenAIRE |
Nájsť tento článok vo Web of Science | Abstrakt: | In the context of quality management and Industry 5.0, reproducibility is a critical indicator of the ability to achieve consistent and predictable results in laboratories, research, as well as in systems and processes. Reproducibility is also an indispensable component of measurement uncertainty, which quantifies the precision of measurement results. To standardize the measurement procedure for surface topography parameters obtained using atomic force microscope (AFM) and to establish the accuracy and precision of measurement results, an analysis of repeatability and reproducibility was conducted in accordance with the ISO 5725-2:2019 standard, Accuracy (trueness and precision) of measurement methods and results – Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method. Measurements were performed on two AFM standards and a steel sample. The research was conducted over the course of one year and repeated after four years using the same samples. |
|---|---|
| ISSN: | 18485588 18466168 |
| DOI: | 10.31803/tg-20250324183037 |