View in EDS

Investigation of the Impact of Selected Face Milling Parameters on the Roughness of the Machined Surface for 1.4301 Steel.

Saved in:
Bibliographic Details
Title: Investigation of the Impact of Selected Face Milling Parameters on the Roughness of the Machined Surface for 1.4301 Steel.
Authors: Bembenek, Michał, Dzienniak, Damian, Dzindziora, Agnieszka, Sułowski, Maciej, Ropyak, Liubomyr
Source: Advances in Science & Technology Research Journal; 2023, Vol. 17 Issue 4, p299-312, 14p
Subject Terms: SURFACE roughness, STEEL, STAINLESS steel, TEETH, PETROLEUM chemicals
Abstract: The objective of this research was to analyze how different milling parameters impact the roughness of the surface produced during the machining process. Kinematic parameters, such as cutting speed and feed per tooth, as well as geometric parameters, such as axial and radial depth of machining, were considered in various configurations to determine which one had the greatest impact on the surface quality of 1.4301 stainless steel (also known as AISI 304, among other designations). This type of steel is commonly used in a number of industries, such as construction, automotive, food, chemical, decoration, oil, and petrochemical, owing to its favorable properties. It is also relatively cheap. The analyzed roughness parameters included Ra, Rq, Rz, Rt, which, considered collectively, provide a comprehensive picture of the overall surface quality. Based on the results, feed per tooth is the one parameter that was to a large degree responsible for the overall quality roughness of the surface of the analyzed samples. The remaining tested parameters also had an impact on the surface quality, which resulted in a dynamic increase or decrease in roughness (extremes), but not to the same degree as in the case of feed per tooth. At one point, for a relatively low axial depth of cut, a sudden increase in the resulting roughness was recorded. [ABSTRACT FROM AUTHOR]
Copyright of Advances in Science & Technology Research Journal is the property of Society of Polish Mechanical Engineers & Technicians and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database: Complementary Index
Description
Abstract:The objective of this research was to analyze how different milling parameters impact the roughness of the surface produced during the machining process. Kinematic parameters, such as cutting speed and feed per tooth, as well as geometric parameters, such as axial and radial depth of machining, were considered in various configurations to determine which one had the greatest impact on the surface quality of 1.4301 stainless steel (also known as AISI 304, among other designations). This type of steel is commonly used in a number of industries, such as construction, automotive, food, chemical, decoration, oil, and petrochemical, owing to its favorable properties. It is also relatively cheap. The analyzed roughness parameters included Ra, Rq, Rz, Rt, which, considered collectively, provide a comprehensive picture of the overall surface quality. Based on the results, feed per tooth is the one parameter that was to a large degree responsible for the overall quality roughness of the surface of the analyzed samples. The remaining tested parameters also had an impact on the surface quality, which resulted in a dynamic increase or decrease in roughness (extremes), but not to the same degree as in the case of feed per tooth. At one point, for a relatively low axial depth of cut, a sudden increase in the resulting roughness was recorded. [ABSTRACT FROM AUTHOR]
ISSN:20804075
DOI:10.12913/22998624/170422