Zobrazit v EDS

Springback Control in Complex Sheet-Metal Forming Based on Advanced High-Strength Steel.

Uloženo v:
Podrobná bibliografie
Název: Springback Control in Complex Sheet-Metal Forming Based on Advanced High-Strength Steel.
Autoři: Lu, Zipeng, Li, Di, Cao, Linlin, Cui, Hongjian, Xu, Jiachuan
Zdroj: Coatings (2079-6412); May2023, Vol. 13 Issue 5, p930, 18p
Témata: SHEET metal, OPTIMIZATION algorithms, STEEL, MANUFACTURING processes
Abstrakt: Sheet-metal forming is one of the most important manufacturing processes in the automotive industry. This study proposes a multiobjective optimisation scheme that controls both sheet-metal formability and springback. First, the mechanical properties of DP590 steel were characterised to obtain the mechanical parameters and forming limit diagram (FLD) of DP590. Then, the FLD, thinning rate, and average springback were selected as forming quality evaluation indices. Response surface tests were then conducted for different process parameters for the A-pillar side-stiffener drawing process to analyse the DP590 steel's formability and springback. The optimal process parameters for the drawing process were obtained using a multiobjective optimisation algorithm based on an improved particle swarm method. Finally, a springback compensation scheme was proposed based on the results of the multiprocess simulation. The scheme was applied experimentally to the A-pillar side-stiffener drawing process, and the formability and springback compensation performances verified that the scheme successfully and efficiently eliminated springback and rupture in formed DP590 steel. [ABSTRACT FROM AUTHOR]
Copyright of Coatings (2079-6412) is the property of MDPI and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Databáze: Complementary Index
Popis
Abstrakt:Sheet-metal forming is one of the most important manufacturing processes in the automotive industry. This study proposes a multiobjective optimisation scheme that controls both sheet-metal formability and springback. First, the mechanical properties of DP590 steel were characterised to obtain the mechanical parameters and forming limit diagram (FLD) of DP590. Then, the FLD, thinning rate, and average springback were selected as forming quality evaluation indices. Response surface tests were then conducted for different process parameters for the A-pillar side-stiffener drawing process to analyse the DP590 steel's formability and springback. The optimal process parameters for the drawing process were obtained using a multiobjective optimisation algorithm based on an improved particle swarm method. Finally, a springback compensation scheme was proposed based on the results of the multiprocess simulation. The scheme was applied experimentally to the A-pillar side-stiffener drawing process, and the formability and springback compensation performances verified that the scheme successfully and efficiently eliminated springback and rupture in formed DP590 steel. [ABSTRACT FROM AUTHOR]
ISSN:20796412
DOI:10.3390/coatings13050930