Passivity Based Control of Four-Switch Buck-Boost DC-DC Converter without Operation Mode Detection

This paper presents a passivity-based control approach for four-switch buck-boost (FSBB) DC-DC converters. The state variables are selected as the inductor current and the capacitor voltage errors. The passivity based control is formulated that targets to drive the inductor current and capacitor vol...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:IECON 2022 – 48th Annual Conference of the IEEE Industrial Electronics Society S. 1 - 6
Hauptverfasser: Komurcugil, Hasan, Bayhan, Sertac, Guler, Naki, Guzman, Ramon
Format: Tagungsbericht
Sprache:Englisch
Veröffentlicht: IEEE 17.10.2022
Schlagworte:
Capacitors
current control
DC-DC power converters
duty cycle
Four switch buck-boost converter
Inductors
Mathematical models
passivity based control
PI control
Simulation
Voltage control
voltage regulation
ISSN:2577-1647
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:This paper presents a passivity-based control approach for four-switch buck-boost (FSBB) DC-DC converters. The state variables are selected as the inductor current and the capacitor voltage errors. The passivity based control is formulated that targets to drive the inductor current and capacitor voltage to their reference values. The reference of the inductor current is produced by a proportional-integral controller that operates on the capacitor voltage error. Two control input equations are defined for buck and boost operations due to the fact that FSBB converter contains separate switches for buck and boost stages. As a consequence of controlling each stage by the dedicated control input, the passivity based control method eliminates the need for using a mode detection algorithm. The validity and superiority of the proposed approach has been studied by Matlab/Simulink simulations under load step, reference voltage step and operation mode variations for buck and boost modes. The results reveal that the proposed control approach can regulate the output voltage under all cases.
ISSN:2577-1647
DOI:10.1109/IECON49645.2022.9968779