Biomass to olefins: Cracking of renewable naphtha

► Steam cracking of renewable naphtha was studied in a pilot plant. ► The naphtha was derived from waste fats and greases by catalytic hydrotreatment. ► The pilot plant experiments show that high light olefin yields can be obtained. ► Based on an experimental coking study, high run lengths can be ex...

Celý popis

Uloženo v:
Podrobná bibliografie
Vydáno v:Chemical engineering journal (Lausanne, Switzerland : 1996) Ročník 176; s. 178 - 187
Hlavní autoři: Pyl, Steven P., Schietekat, Carl M., Reyniers, Marie-Françoise, Abhari, Ramin, Marin, Guy. B., Van Geem, Kevin M.
Médium: Journal Article
Jazyk:angličtina
Vydáno: Elsevier B.V 01.12.2011
Témata:
aromatic compounds
Biomass
Biomass conversion
chemical engineering
Comprehensive 2D GC
cracking
Ethylene
ethylene production
Fats
fatty acids
Fossils
Fracture mechanics
fuel oils
gasoline
Naphtha
olefin
Olefin production
Olefins
propylene
Pyrolysis
steam
Steam cracking
triacylglycerols
Biomass conversion
Olefin production
Comprehensive 2D GC
Steam cracking
ISSN:1385-8947, 1873-3212
On-line přístup:Získat plný text
Tagy: Přidat tag
Žádné tagy, Buďte první, kdo vytvoří štítek k tomuto záznamu!
Popis
Shrnutí:► Steam cracking of renewable naphtha was studied in a pilot plant. ► The naphtha was derived from waste fats and greases by catalytic hydrotreatment. ► The pilot plant experiments show that high light olefin yields can be obtained. ► Based on an experimental coking study, high run lengths can be expected. An alternative route for the production of light olefins is proposed starting from low value and waste fats, greases and other renewable fractions. The first step catalytically converts triglycerides and/or fatty acids from bio oils to a high quality paraffinic diesel or jet fuel and renewable naphtha. GC × GC–TOF-MS and GC × GC–FID characterization of the renewable naphtha showed that it mainly consists of n-paraffins (32.6 wt%) and iso-paraffins (60 wt%), with only small amounts of aromatics (0.8 wt%), naphthenics (6.3 wt%) and olefinics (0.3 wt%). No remaining oxygenates are measured, making it a potentially attractive feed for the production of ethylene. Steam cracking of this renewable naphtha in a pilot plant revealed that high light olefin yields can be obtained (ethylene yield of 31 wt% and a propylene yield of 17.5 wt%), while the amount of pyrolysis gasoline (15 wt%) and pyrolysis fuel oil (<1 wt%) produced remains small. An experimental coking study further confirmed the attractive character of this feed. Run length simulations show that higher run lengths can be expected in comparison with the typically used naphtha fractions from fossil resources.
Bibliografie:http://dx.doi.org/10.1016/j.cej.2011.04.062
ObjectType-Article-1
SourceType-Scholarly Journals-1
ObjectType-Feature-2
content type line 23
ISSN:1385-8947
1873-3212
DOI:10.1016/j.cej.2011.04.062