Novel origami-inspired metamaterials: Design, mechanical testing and finite element modelling
Two novel, origami-inspired, metamaterials were designed, mechanically tested, and modelled. One novel origami model was folded using a triangular based crease pattern and the other was folded using a rectangular based crease pattern. The origami-inspired metamaterial sheets were fabricated from pol...
Uložené v:
| Vydané v: | Materials & design Ročník 186; s. 108242 |
|---|---|
| Hlavní autori: | , |
| Médium: | Journal Article |
| Jazyk: | English |
| Vydavateľské údaje: |
Elsevier Ltd
15.01.2020
Elsevier |
| Predmet: | |
| ISSN: | 0264-1275, 1873-4197 |
| On-line prístup: | Získať plný text |
| Tagy: |
Pridať tag
Žiadne tagy, Buďte prvý, kto otaguje tento záznam!
|
| Abstract | Two novel, origami-inspired, metamaterials were designed, mechanically tested, and modelled. One novel origami model was folded using a triangular based crease pattern and the other was folded using a rectangular based crease pattern. The origami-inspired metamaterial sheets were fabricated from polylactic acid using fused deposition additive manufacturing. Several configurations, parameterized by varying the fold angle, were mechanically tested under compression and impact loads. It was found that the specific elastic compression modulus of these novel designs was higher, ranging from 594 MPa/kg to 926 MPa/kg, than existing origami-inspired structures made based on the popular Ron-Resch design, which had specific elastic compression moduli between 15 MPa/kg to 365 MPa/kg. A finite element model further analysed the stress distribution of the core structures under compression loads. The impact testing results showed that the pattern of the tessellated cores affected the amount of impact force transferred through the samples, whereas the fold angle of the origami-inspired design had little impact on the results. The rectangular structure was shown to transfer approximately 50–75% of the force transferred by the triangular structure under impact loads.
[Display omitted]
•Two novel, origami-inspired, tessellated patterns were designed for use as light-weight cores in sandwich structures.•Compressions tests showed that increasing fold angle improved the metamaterials’ resistance to compression loads.•The elastic compression moduli of both new designs were higher than that of existing Miura-ori and Ron Resch designs.•The ability to absorb impact force was dependant on the tessellated design pattern and independent of the origami fold angle. |
|---|---|
| AbstractList | Two novel, origami-inspired, metamaterials were designed, mechanically tested, and modelled. One novel origami model was folded using a triangular based crease pattern and the other was folded using a rectangular based crease pattern. The origami-inspired metamaterial sheets were fabricated from polylactic acid using fused deposition additive manufacturing. Several configurations, parameterized by varying the fold angle, were mechanically tested under compression and impact loads. It was found that the specific elastic compression modulus of these novel designs was higher, ranging from 594 MPa/kg to 926 MPa/kg, than existing origami-inspired structures made based on the popular Ron-Resch design, which had specific elastic compression moduli between 15 MPa/kg to 365 MPa/kg. A finite element model further analysed the stress distribution of the core structures under compression loads. The impact testing results showed that the pattern of the tessellated cores affected the amount of impact force transferred through the samples, whereas the fold angle of the origami-inspired design had little impact on the results. The rectangular structure was shown to transfer approximately 50–75% of the force transferred by the triangular structure under impact loads. Keywords: Origami, Metamaterial, Fused deposition modelling, Compression, Impact, Finite element modelling Two novel, origami-inspired, metamaterials were designed, mechanically tested, and modelled. One novel origami model was folded using a triangular based crease pattern and the other was folded using a rectangular based crease pattern. The origami-inspired metamaterial sheets were fabricated from polylactic acid using fused deposition additive manufacturing. Several configurations, parameterized by varying the fold angle, were mechanically tested under compression and impact loads. It was found that the specific elastic compression modulus of these novel designs was higher, ranging from 594 MPa/kg to 926 MPa/kg, than existing origami-inspired structures made based on the popular Ron-Resch design, which had specific elastic compression moduli between 15 MPa/kg to 365 MPa/kg. A finite element model further analysed the stress distribution of the core structures under compression loads. The impact testing results showed that the pattern of the tessellated cores affected the amount of impact force transferred through the samples, whereas the fold angle of the origami-inspired design had little impact on the results. The rectangular structure was shown to transfer approximately 50–75% of the force transferred by the triangular structure under impact loads. [Display omitted] •Two novel, origami-inspired, tessellated patterns were designed for use as light-weight cores in sandwich structures.•Compressions tests showed that increasing fold angle improved the metamaterials’ resistance to compression loads.•The elastic compression moduli of both new designs were higher than that of existing Miura-ori and Ron Resch designs.•The ability to absorb impact force was dependant on the tessellated design pattern and independent of the origami fold angle. |
| ArticleNumber | 108242 |
| Author | Wickeler, Anastasia L. Naguib, Hani E. |
| Author_xml | – sequence: 1 givenname: Anastasia L. surname: Wickeler fullname: Wickeler, Anastasia L. organization: Department of Mechanical and Industrial Engineering, University of Toronto, 5 King's College Road, Toronto, ON M5S 3G8, Canada – sequence: 2 givenname: Hani E. orcidid: 0000-0003-4822-9990 surname: Naguib fullname: Naguib, Hani E. email: naguib@mie.utoronto.ca organization: Department of Mechanical and Industrial Engineering, University of Toronto, 5 King's College Road, Toronto, ON M5S 3G8, Canada |
| BookMark | eNqFkcFKHTEUhkOx0Kv2DbqYB-hck0zmZuJCEKtVEN3UZQnnJmduz2UmkSQIfXuj025c6CYH_vB9JP85ZAchBmTsm-BrwcXmZL-eoXjMa8mFqdEglfzEVmLQXauE0QdsxeVGtULq_gs7zHnPuZS6Uyv2-y4-4dTERDuYqaWQHymhb2YsUKWYCKZ82vzATLvwvcbuDwRyMDUFc6GwayD4ZqRABRuccMZQmjl6nKZ6ecw-j5XHr__mEXu4uvx1cd3e3v-8uTi_bZ0SQ2m1194gd3rbj53YGA66593ots4op8beQW-UrOdWc8N9b3qlQW4Fx4ob77ojdrN4fYS9fUw0Q_prI5B9DWLaWUiF3IQWtR6G0WsJVa6lNGIzmEHJEcApLfrqOl1cLsWcE47WUYFCMZQENFnB7Uvpdm-X0u1L6XYpvcLqDfz_MR9gZwuGtaQnwmSzIwwOfV2GK_UX9L7gGW91oH8 |
| CitedBy_id | crossref_primary_10_7736_JKSPE_023_071 crossref_primary_10_1371_journal_pone_0290345 crossref_primary_10_1016_j_mechrescom_2023_104182 crossref_primary_10_1016_j_procir_2022_06_067 crossref_primary_10_1088_1361_665X_ad7f33 crossref_primary_10_1016_j_tws_2020_106993 crossref_primary_10_1016_j_matlet_2023_133903 crossref_primary_10_1002_aisy_202300468 crossref_primary_10_1016_j_ymssp_2024_111659 crossref_primary_10_1088_1361_6463_adade5 crossref_primary_10_1016_j_matdes_2021_109859 crossref_primary_10_1016_j_mattod_2023_03_026 crossref_primary_10_1016_j_matdes_2022_111497 crossref_primary_10_1016_j_matdes_2021_110285 crossref_primary_10_1177_0021955X211061838 crossref_primary_10_1016_j_mtcomm_2020_101872 crossref_primary_10_1038_s41467_023_37343_w crossref_primary_10_1177_1045389X231181940 crossref_primary_10_1016_j_compscitech_2023_110383 crossref_primary_10_1061_JENMDT_EMENG_8048 crossref_primary_10_1016_j_compbiomed_2021_104386 crossref_primary_10_1016_j_apmt_2020_100752 crossref_primary_10_1016_j_matdes_2021_109906 crossref_primary_10_3390_ma16155306 crossref_primary_10_1016_j_ijmecsci_2022_107316 crossref_primary_10_1016_j_jsv_2022_117407 crossref_primary_10_1093_imanum_draf033 crossref_primary_10_1515_cmam_2022_0259 crossref_primary_10_1088_1361_665X_ac980e crossref_primary_10_1007_s11665_023_07872_y crossref_primary_10_1080_15376494_2022_2126567 crossref_primary_10_1002_adem_202300750 crossref_primary_10_1016_j_matpr_2023_04_391 crossref_primary_10_1002_advs_202000636 crossref_primary_10_1063_5_0051088 crossref_primary_10_1007_s11071_024_10012_3 crossref_primary_10_3390_app112311139 crossref_primary_10_1080_23746149_2025_2548208 crossref_primary_10_1007_s41939_025_00897_x crossref_primary_10_1016_j_matpr_2020_05_410 crossref_primary_10_1016_j_tws_2021_107665 crossref_primary_10_1002_adem_202200386 crossref_primary_10_1016_j_engstruct_2022_115377 crossref_primary_10_1016_j_ijmecsci_2024_109220 crossref_primary_10_1088_1361_665X_abff17 crossref_primary_10_1007_s40684_023_00549_w crossref_primary_10_1016_j_eml_2020_100930 crossref_primary_10_1016_j_eml_2023_102087 crossref_primary_10_1016_j_compstruct_2022_116349 crossref_primary_10_3390_mi16091047 crossref_primary_10_1016_j_matdes_2025_113701 crossref_primary_10_1016_j_tws_2024_112452 |
| Cites_doi | 10.1002/adem.201600053 10.1088/0964-1726/23/9/094010 10.1243/09544100JAERO185 10.1088/0964-1726/24/9/095016 10.1016/j.ijmecsci.2017.12.026 10.1016/j.pmatsci.2017.12.003 10.1557/mrc.2015.51 10.1016/j.applthermaleng.2009.12.018 10.1016/j.compstruct.2018.04.084 10.1002/adma.201501708 10.1016/j.tws.2014.05.001 10.1088/1361-665X/aaec40 10.1002/pssb.201451304 10.1016/j.eml.2016.09.001 10.1016/j.compstruct.2017.09.023 10.1016/j.matdes.2017.03.065 10.1073/pnas.1502939112 10.1103/PhysRevLett.114.185502 10.1023/B:JMSC.0000026928.93231.e0 10.1115/1.4032203 10.1016/j.tws.2017.02.021 10.1002/pssb.201084211 10.1088/1361-665X/26/2/025012 10.1088/1361-665X/aa8832 10.1088/0964-1726/22/8/084016 10.1016/j.compositesb.2016.10.023 10.4236/ojapps.2017.76024 10.1016/j.ijmecsci.2015.05.009 10.1002/pssb.201600027 10.1038/srep05979 10.1098/rsos.150067 |
| ContentType | Journal Article |
| Copyright | 2019 The Authors |
| Copyright_xml | – notice: 2019 The Authors |
| DBID | 6I. AAFTH AAYXX CITATION DOA |
| DOI | 10.1016/j.matdes.2019.108242 |
| DatabaseName | ScienceDirect Open Access Titles Elsevier:ScienceDirect:Open Access CrossRef DOAJ Directory of Open Access Journals |
| DatabaseTitle | CrossRef |
| DatabaseTitleList | |
| Database_xml | – sequence: 1 dbid: DOA name: DOAJ Directory of Open Access Journals url: https://www.doaj.org/ sourceTypes: Open Website |
| DeliveryMethod | fulltext_linktorsrc |
| Discipline | Engineering |
| EISSN | 1873-4197 |
| ExternalDocumentID | oai_doaj_org_article_e7788fd72ac9472291689842faac4715 10_1016_j_matdes_2019_108242 S026412751930680X |
| GroupedDBID | --K --M -~X .~1 0SF 1B1 1~. 4.4 457 4G. 5GY 5VS 6I. 7-5 8P~ 9JN AABNK AABXZ AACTN AAEDT AAEDW AAFTH AAIAV AAKOC AALRI AAOAW AAQFI AAXUO ABMAC ABYKQ ACDAQ ACGFS ACRLP ADBBV ADEZE AEBSH AEKER AEZYN AFKWA AFRZQ AFTJW AGHFR AGUBO AHJVU AIEXJ AIKHN AITUG AJOXV ALMA_UNASSIGNED_HOLDINGS AMFUW AMRAJ AXJTR BCNDV BJAXD BKOJK BLXMC EBS EFJIC EJD EO8 EO9 EP2 EP3 F5P FDB FIRID FNPLU FYGXN G-Q GBLVA GROUPED_DOAJ IHE J1W KOM M41 MO0 NCXOZ OAUVE OK1 P2P PC. Q38 ROL SDF SDG SDP SPC SSM SST SSZ T5K ~G- 0R~ 29M AAQXK AATTM AAXKI AAYWO AAYXX ABJNI ABWVN ABXDB ACLOT ACRPL ACVFH ADCNI ADMUD ADNMO ADVLN AEIPS AEUPX AFJKZ AFPUW AGQPQ AHHHB AIGII AIIUN AKBMS AKRWK AKYEP ANKPU APXCP ASPBG AVWKF AZFZN CITATION EFKBS EFLBG FEDTE FGOYB G-2 HVGLF HZ~ JJJVA MAGPM O9- P-8 P-9 R2- RNS RPZ SEW SMS WUQ |
| ID | FETCH-LOGICAL-c418t-7d7d9e0c7b5f31690a7503fcbc94c4f5ca5942ca5b7090d59547a2b10e4189dc3 |
| IEDL.DBID | DOA |
| ISICitedReferencesCount | 63 |
| ISICitedReferencesURI | http://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=Summon&SrcAuth=ProQuest&DestLinkType=CitingArticles&DestApp=WOS_CPL&KeyUT=000505221700071&url=https%3A%2F%2Fcvtisr.summon.serialssolutions.com%2F%23%21%2Fsearch%3Fho%3Df%26include.ft.matches%3Dt%26l%3Dnull%26q%3D |
| ISSN | 0264-1275 |
| IngestDate | Fri Oct 03 12:50:58 EDT 2025 Tue Nov 18 21:28:53 EST 2025 Sat Nov 29 07:21:56 EST 2025 Fri Feb 23 02:46:26 EST 2024 |
| IsDoiOpenAccess | true |
| IsOpenAccess | true |
| IsPeerReviewed | true |
| IsScholarly | true |
| Keywords | Origami Impact Compression Finite element modelling Metamaterial Fused deposition modelling |
| Language | English |
| License | This is an open access article under the CC BY-NC-ND license. |
| LinkModel | DirectLink |
| MergedId | FETCHMERGED-LOGICAL-c418t-7d7d9e0c7b5f31690a7503fcbc94c4f5ca5942ca5b7090d59547a2b10e4189dc3 |
| ORCID | 0000-0003-4822-9990 |
| OpenAccessLink | https://doaj.org/article/e7788fd72ac9472291689842faac4715 |
| ParticipantIDs | doaj_primary_oai_doaj_org_article_e7788fd72ac9472291689842faac4715 crossref_citationtrail_10_1016_j_matdes_2019_108242 crossref_primary_10_1016_j_matdes_2019_108242 elsevier_sciencedirect_doi_10_1016_j_matdes_2019_108242 |
| PublicationCentury | 2000 |
| PublicationDate | 2020-01-15 |
| PublicationDateYYYYMMDD | 2020-01-15 |
| PublicationDate_xml | – month: 01 year: 2020 text: 2020-01-15 day: 15 |
| PublicationDecade | 2020 |
| PublicationTitle | Materials & design |
| PublicationYear | 2020 |
| Publisher | Elsevier Ltd Elsevier |
| Publisher_xml | – name: Elsevier Ltd – name: Elsevier |
| References | Christensen, Kardi, Wegener, Kraft (bb0110) 2015; 5 Sarvestani, Akbarzadeh, Niknam, Hermenean (bb0205) 2018; 200 Klett, Middendorf (bb0060) 2016; 8 Klett, Middendorf, Sobek, Haase, Heidingsfeld (bb0090) 2017 R. D. Resch, "Self-supporting structural units having a series of repetitious goemetrical modules". United States of America Patent 3,407,558, 29 October 1968. American Society of Testing Materials (bb0215) 2016 American Society of Testing Materials (bb0225) 2015 Yasuda, Tang (bb0115) 2015; 114 Kshad, D'Hondt, Naguib (bb0150) 2017; 26 Xiang, Lu, Ruan, You, Zolghadr (bb0020) 2017; 182 Ma, Song, Chen (bb0025) 2018; 136 Shan, Kang, Raney, Wang, Fang, Candido, Lewis, Bertoldi (bb0195) 2015; 27 El-sawi, Wifi, Younan, Elsayed, Basily (bb0100) 2010; 30 Neville, Scarpa, Pirrera (bb0105) 2016; 6 Tachi (bb0210) 2011 Lv, Krishnaraju, Konhevod, Yu, Jiang (bb0145) 2014; 4 Huang, Wong, Chou (bb0040) 2016; 8 Evans, Lang, Magleby, Howell (bb0175) 2015; 2 Kshad, Naguib (bb0155) 2017; 26 Paulose, Meeussen, Vitelli (bb0185) 2015; 112 Tolman, Delimont, Howell, Fullwood (bb0055) 2014; 23 American Society of Testing Materials (bb0220) 2016 Chacon, Caminero, Garcia-Plaza, Nunez (bb0165) 2017; 124 Wang-Iverson, Lang, Tim (bb0170) 2011 Kshad, Popinigis, Naguib (bb0230) 2019; 28 Rafsanjani, Pasini (bb0050) 2016; 9 Yu, Zhou, Liang, Jiang, Wu (bb0125) 2018; 94 Grima, Caruana-Gauci, Dudek, Wojcirchowski, Gatt (bb0180) 2013; 22 Ren, Shen, Ghaedizadeh, Tian, Min Xie (bb0190) 2015; 24 Alafaghani, Qattawi, Ablat (bb0160) 2017; 7 B. B. Basily and E. A. Elsayed, "Design and Development of lightweight sandwich structures with innovative sheet folded cores". Schwerdtfeger, Schury, Stingl, Wein, Singer, Korner (bb0045) 2011; 249 Soon Oh, Hess (bb0065) 2015; 2 Pydah, Batra (bb0010) 2017; 115 Saxena, Das, Calius (bb0085) 2016; 18 Rant, Rijavec, Pavko-Cuden (bb0080) 2013; 60 Alderson, Alderson (bb0075) 2007; 221 Yang, Li, Shi, Xie, Yang (bb0030) 2004; 39 Gatt, Mizzi, Azzopardi, Azzoparde, Attard, Casha, Briffa, Grima (bb0005) 2014; 5 Liu, Lu, Chen, Leong (bb0135) 2015; 99 Zhou, Wang, You (bb0140) 2014; 82 Magliozzi, Micheletti, Pizzigoni, Ruscica (bb0130) 2017 Scarpa (bb0095) 2008; 128 Shen, Zhou, Huang, Xie (bb0035) 2014; 251 Tancogne-Dejean, Diamantopoulou, Gorji, Bonatti, Mohr (bb0070) 2018; 30 Xiang, You, Lu (bb0015) 2018; 195 American Society of Testing Materials (10.1016/j.matdes.2019.108242_bb0225) 2015 Saxena (10.1016/j.matdes.2019.108242_bb0085) 2016; 18 El-sawi (10.1016/j.matdes.2019.108242_bb0100) 2010; 30 Chacon (10.1016/j.matdes.2019.108242_bb0165) 2017; 124 Wang-Iverson (10.1016/j.matdes.2019.108242_bb0170) 2011 Gatt (10.1016/j.matdes.2019.108242_bb0005) 2014; 5 Huang (10.1016/j.matdes.2019.108242_bb0040) 2016; 8 Soon Oh (10.1016/j.matdes.2019.108242_bb0065) 2015; 2 Shen (10.1016/j.matdes.2019.108242_bb0035) 2014; 251 American Society of Testing Materials (10.1016/j.matdes.2019.108242_bb0220) 2016 Xiang (10.1016/j.matdes.2019.108242_bb0015) 2018; 195 American Society of Testing Materials (10.1016/j.matdes.2019.108242_bb0215) 2016 Zhou (10.1016/j.matdes.2019.108242_bb0140) 2014; 82 Yu (10.1016/j.matdes.2019.108242_bb0125) 2018; 94 Magliozzi (10.1016/j.matdes.2019.108242_bb0130) 2017 Klett (10.1016/j.matdes.2019.108242_bb0090) 2017 Christensen (10.1016/j.matdes.2019.108242_bb0110) 2015; 5 Rafsanjani (10.1016/j.matdes.2019.108242_bb0050) 2016; 9 Tolman (10.1016/j.matdes.2019.108242_bb0055) 2014; 23 Schwerdtfeger (10.1016/j.matdes.2019.108242_bb0045) 2011; 249 Alafaghani (10.1016/j.matdes.2019.108242_bb0160) 2017; 7 Alderson (10.1016/j.matdes.2019.108242_bb0075) 2007; 221 Lv (10.1016/j.matdes.2019.108242_bb0145) 2014; 4 Pydah (10.1016/j.matdes.2019.108242_bb0010) 2017; 115 Kshad (10.1016/j.matdes.2019.108242_bb0150) 2017; 26 Klett (10.1016/j.matdes.2019.108242_bb0060) 2016; 8 Tachi (10.1016/j.matdes.2019.108242_bb0210) 2011 Xiang (10.1016/j.matdes.2019.108242_bb0020) 2017; 182 Rant (10.1016/j.matdes.2019.108242_bb0080) 2013; 60 Sarvestani (10.1016/j.matdes.2019.108242_bb0205) 2018; 200 Paulose (10.1016/j.matdes.2019.108242_bb0185) 2015; 112 Tancogne-Dejean (10.1016/j.matdes.2019.108242_bb0070) 2018; 30 Grima (10.1016/j.matdes.2019.108242_bb0180) 2013; 22 Yasuda (10.1016/j.matdes.2019.108242_bb0115) 2015; 114 Ma (10.1016/j.matdes.2019.108242_bb0025) 2018; 136 Kshad (10.1016/j.matdes.2019.108242_bb0155) 2017; 26 Shan (10.1016/j.matdes.2019.108242_bb0195) 2015; 27 Ren (10.1016/j.matdes.2019.108242_bb0190) 2015; 24 Scarpa (10.1016/j.matdes.2019.108242_bb0095) 2008; 128 Kshad (10.1016/j.matdes.2019.108242_bb0230) 2019; 28 Liu (10.1016/j.matdes.2019.108242_bb0135) 2015; 99 Neville (10.1016/j.matdes.2019.108242_bb0105) 2016; 6 10.1016/j.matdes.2019.108242_bb0200 Yang (10.1016/j.matdes.2019.108242_bb0030) 2004; 39 Evans (10.1016/j.matdes.2019.108242_bb0175) 2015; 2 10.1016/j.matdes.2019.108242_bb0120 |
| References_xml | – volume: 26 year: 2017 ident: bb0155 article-title: Development and modeling of mulit-phase polymeric organic inspired architecture by using pre-molded geometrical features publication-title: Smart Mater. Struct. – volume: 2 year: 2015 ident: bb0175 article-title: Rigidly foldable origami gadgets and tessellations publication-title: R. Soc. Open Sci. – volume: 22 year: 2013 ident: bb0180 article-title: Smart metamaterials with tunable auxetic and other properties publication-title: Smart Mater. Struct. – volume: 5 start-page: 453 year: 2015 end-page: 462 ident: bb0110 article-title: Vibrant times for mechanical metamaterials publication-title: MRS Commun. – year: 2015 ident: bb0225 article-title: ASTM D7136 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-weight Impact Event – volume: 182 start-page: 209 year: 2017 end-page: 222 ident: bb0020 article-title: Large deformation of an arc-Miura structure under quasi-static load publication-title: Compos. Struct. – year: 2016 ident: bb0220 article-title: ASTM D7766 Standard Practice for Damage Resistance Testing of Sandwich Constructions – volume: 136 start-page: 134 year: 2018 end-page: 142 ident: bb0025 article-title: An origami-inspired structure with graded stiffness publication-title: Int. J. Mech. Sci. – volume: 82 start-page: 296 year: 2014 end-page: 310 ident: bb0140 article-title: Mechanical properties of Miura-based folded cores under quasi-static loads publication-title: Thin-Walled Struct. – volume: 2 year: 2015 ident: bb0065 article-title: Chiral metamaterials: enhancement and control of optical activity and circular dichroism publication-title: Nano Convergence – volume: 28 year: 2019 ident: bb0230 article-title: 3D printing of Ron-Resch-like origami cores for compression and impact load damping publication-title: Smart Mater. Struct. – volume: 9 start-page: 291 year: 2016 end-page: 296 ident: bb0050 article-title: Bistable auxetic mechanical metamaterials inspired by ancient geometric motifs publication-title: Extreme Mech. Lett. – volume: 251 start-page: 1515 year: 2014 end-page: 1522 ident: bb0035 article-title: Simple cubic three-dimensional auxetic metamaterials publication-title: Phys. Status Solidi – volume: 221 start-page: 565 year: 2007 end-page: 575 ident: bb0075 article-title: Auxetic materials publication-title: Proc. IMechE Aerospace Engineering – volume: 60 start-page: 715 year: 2013 end-page: 723 ident: bb0080 article-title: Auxetic Textiles publication-title: Acta Chim. Slov. – volume: 18 start-page: 1847 year: 2016 end-page: 1870 ident: bb0085 article-title: Three decades of auxetics research - materials with negative Poisson's ratio: a review publication-title: Adv. Eng. Mater. – volume: 7 start-page: 291 year: 2017 end-page: 318 ident: bb0160 article-title: Design consideration for additive manufacturing: fused deposition modelling publication-title: Open J. Appl. Sci. – volume: 128 start-page: 124 year: 2008 end-page: 125 ident: bb0095 article-title: Auxetic materials for bioprostheses publication-title: IEEE Signal Process. Mag. – volume: 4 year: 2014 ident: bb0145 article-title: Origami based mechanical metamaterials publication-title: Sci. Rep. – volume: 30 start-page: 864 year: 2010 end-page: 871 ident: bb0100 article-title: Application of folded sheet metal in flat bed solar air collectors publication-title: Appl. Therm. Eng. – volume: 200 start-page: 889 year: 2018 end-page: 909 ident: bb0205 article-title: 3D printed architected polumeric sandwich panels: energy absorption and structural performance publication-title: Compos. Struct. – volume: 26 start-page: 1 year: 2017 end-page: 12 ident: bb0150 article-title: Carbon nano fibers reinforced composties origami inspired mechanical metamateirals with passive and active properties publication-title: Smart Mater. Struct. – year: 2016 ident: bb0215 article-title: ASTM D1621 Standard Test Method for Compressive Properties of Rigid Cellular Plastics – reference: B. B. Basily and E. A. Elsayed, "Design and Development of lightweight sandwich structures with innovative sheet folded cores". – volume: 94 start-page: 114 year: 2018 end-page: 173 ident: bb0125 article-title: Mechanical metamaterials associated with stiffness, rigidity and compressibility: a brief review publication-title: Prog. Mater. Sci. – volume: 112 start-page: 7639 year: 2015 end-page: 7644 ident: bb0185 article-title: Selective buckling via states of self-stress in topological metamaterials publication-title: PNAS – volume: 39 start-page: 3269 year: 2004 end-page: 3279 ident: bb0030 article-title: Review on auxetic materials publication-title: J. Mater. Sci. – year: 2017 ident: bb0090 article-title: Potential and origami-based shell elements as next-generation envelope components publication-title: IEEE International Conference on Advanded Intelligent Mechatronics (AIM), Munich – volume: 23 year: 2014 ident: bb0055 article-title: Material selection for elastic energy absorption in origami-inspired compliant corrugations publication-title: Smart Mater. Struct. – volume: 249 start-page: 1347 year: 2011 end-page: 1352 ident: bb0045 article-title: Mechanical characterisation of a periodic auxetic structures produced by SEBM publication-title: Phys. Status Solidi – volume: 27 start-page: 4296 year: 2015 end-page: 4301 ident: bb0195 article-title: Multistable architected materials for trapping elastic strain energy publication-title: Adv. Mater. – volume: 99 start-page: 130 year: 2015 end-page: 142 ident: bb0135 article-title: Deformation of the Miura-ori patterned sheet publication-title: Int. J. Mech. Sci. – volume: 5 year: 2014 ident: bb0005 article-title: Hierarchical auxetic mechanical metamaterials publication-title: Sci. Rep. – volume: 6 year: 2016 ident: bb0105 article-title: Shape morphing Kirigami mechanical metanaterials publication-title: Sci. Rep. – reference: R. D. Resch, "Self-supporting structural units having a series of repetitious goemetrical modules". United States of America Patent 3,407,558, 29 October 1968. – start-page: 253 year: 2011 end-page: 263 ident: bb0210 article-title: "Rigid-Foldable Thick Origami," in – volume: 115 start-page: 311 year: 2017 end-page: 322 ident: bb0010 article-title: Crush dynamics and transient deformations of elastic-plastic Miura-ori core sandwich plates publication-title: Thin-Walled Struct. – year: 2011 ident: bb0170 article-title: Origami 5 – volume: 124 start-page: 143 year: 2017 end-page: 157 ident: bb0165 article-title: Additive manufacturing of PLA structures using fused deposition modelling: effect of process parameters on mechanical properties and their optima selection publication-title: Mater. Des. – volume: 114 start-page: 185502(5) year: 2015 ident: bb0115 article-title: Reentrant origami-based metamaterials with negative Poisson's ratio and bistability publication-title: Phys. Rev. Lett. – volume: 8 start-page: 1557 year: 2016 end-page: 1564 ident: bb0040 article-title: Design and properties of 3D-printed chiral auxetic metamaterials by reconfigurable connections publication-title: Phys. Status Solidi – volume: 30 start-page: 1 year: 2018 end-page: 6 ident: bb0070 article-title: 3D plate-lattices: an emerging class of low-density metamaterials exhibiting optimal isotropic stiffness publication-title: Adv. Mater. – volume: 195 start-page: 359 year: 2018 end-page: 374 ident: bb0015 article-title: Rectangular sandwich plates with Miura-ori folded core under quasi-static loadings publication-title: Compos. Struct. – volume: 8 year: 2016 ident: bb0060 article-title: Kinematic analysis of congruent multilayer tessellations publication-title: J. Mech. Robot. – start-page: 144 year: 2017 end-page: 150 ident: bb0130 article-title: On the design of origami structures with a continuum of equilibrium shapes publication-title: Composites Part B – volume: 24 year: 2015 ident: bb0190 article-title: Experiments and parametric studies on 3D metallic auxetic metamaterials with tuneable mechanical properties publication-title: Smart Mater. Struct. – volume: 18 start-page: 1847 issue: 11 year: 2016 ident: 10.1016/j.matdes.2019.108242_bb0085 article-title: Three decades of auxetics research - materials with negative Poisson's ratio: a review publication-title: Adv. Eng. Mater. doi: 10.1002/adem.201600053 – volume: 23 year: 2014 ident: 10.1016/j.matdes.2019.108242_bb0055 article-title: Material selection for elastic energy absorption in origami-inspired compliant corrugations publication-title: Smart Mater. Struct. doi: 10.1088/0964-1726/23/9/094010 – volume: 221 start-page: 565 year: 2007 ident: 10.1016/j.matdes.2019.108242_bb0075 article-title: Auxetic materials publication-title: Proc. IMechE Aerospace Engineering doi: 10.1243/09544100JAERO185 – volume: 24 year: 2015 ident: 10.1016/j.matdes.2019.108242_bb0190 article-title: Experiments and parametric studies on 3D metallic auxetic metamaterials with tuneable mechanical properties publication-title: Smart Mater. Struct. doi: 10.1088/0964-1726/24/9/095016 – volume: 200 start-page: 889 year: 2018 ident: 10.1016/j.matdes.2019.108242_bb0205 article-title: 3D printed architected polumeric sandwich panels: energy absorption and structural performance publication-title: Compos. Struct. – volume: 30 start-page: 1 year: 2018 ident: 10.1016/j.matdes.2019.108242_bb0070 article-title: 3D plate-lattices: an emerging class of low-density metamaterials exhibiting optimal isotropic stiffness publication-title: Adv. Mater. – volume: 136 start-page: 134 year: 2018 ident: 10.1016/j.matdes.2019.108242_bb0025 article-title: An origami-inspired structure with graded stiffness publication-title: Int. J. Mech. Sci. doi: 10.1016/j.ijmecsci.2017.12.026 – volume: 94 start-page: 114 year: 2018 ident: 10.1016/j.matdes.2019.108242_bb0125 article-title: Mechanical metamaterials associated with stiffness, rigidity and compressibility: a brief review publication-title: Prog. Mater. Sci. doi: 10.1016/j.pmatsci.2017.12.003 – volume: 5 start-page: 453 year: 2015 ident: 10.1016/j.matdes.2019.108242_bb0110 article-title: Vibrant times for mechanical metamaterials publication-title: MRS Commun. doi: 10.1557/mrc.2015.51 – volume: 30 start-page: 864 year: 2010 ident: 10.1016/j.matdes.2019.108242_bb0100 article-title: Application of folded sheet metal in flat bed solar air collectors publication-title: Appl. Therm. Eng. doi: 10.1016/j.applthermaleng.2009.12.018 – ident: 10.1016/j.matdes.2019.108242_bb0120 – volume: 195 start-page: 359 year: 2018 ident: 10.1016/j.matdes.2019.108242_bb0015 article-title: Rectangular sandwich plates with Miura-ori folded core under quasi-static loadings publication-title: Compos. Struct. doi: 10.1016/j.compstruct.2018.04.084 – volume: 27 start-page: 4296 year: 2015 ident: 10.1016/j.matdes.2019.108242_bb0195 article-title: Multistable architected materials for trapping elastic strain energy publication-title: Adv. Mater. doi: 10.1002/adma.201501708 – volume: 82 start-page: 296 year: 2014 ident: 10.1016/j.matdes.2019.108242_bb0140 article-title: Mechanical properties of Miura-based folded cores under quasi-static loads publication-title: Thin-Walled Struct. doi: 10.1016/j.tws.2014.05.001 – volume: 28 year: 2019 ident: 10.1016/j.matdes.2019.108242_bb0230 article-title: 3D printing of Ron-Resch-like origami cores for compression and impact load damping publication-title: Smart Mater. Struct. doi: 10.1088/1361-665X/aaec40 – volume: 251 start-page: 1515 issue: 8 year: 2014 ident: 10.1016/j.matdes.2019.108242_bb0035 article-title: Simple cubic three-dimensional auxetic metamaterials publication-title: Phys. Status Solidi doi: 10.1002/pssb.201451304 – volume: 128 start-page: 124 year: 2008 ident: 10.1016/j.matdes.2019.108242_bb0095 article-title: Auxetic materials for bioprostheses publication-title: IEEE Signal Process. Mag. – volume: 9 start-page: 291 year: 2016 ident: 10.1016/j.matdes.2019.108242_bb0050 article-title: Bistable auxetic mechanical metamaterials inspired by ancient geometric motifs publication-title: Extreme Mech. Lett. doi: 10.1016/j.eml.2016.09.001 – year: 2016 ident: 10.1016/j.matdes.2019.108242_bb0215 – volume: 182 start-page: 209 year: 2017 ident: 10.1016/j.matdes.2019.108242_bb0020 article-title: Large deformation of an arc-Miura structure under quasi-static load publication-title: Compos. Struct. doi: 10.1016/j.compstruct.2017.09.023 – volume: 124 start-page: 143 year: 2017 ident: 10.1016/j.matdes.2019.108242_bb0165 article-title: Additive manufacturing of PLA structures using fused deposition modelling: effect of process parameters on mechanical properties and their optima selection publication-title: Mater. Des. doi: 10.1016/j.matdes.2017.03.065 – volume: 112 start-page: 7639 issue: 25 year: 2015 ident: 10.1016/j.matdes.2019.108242_bb0185 article-title: Selective buckling via states of self-stress in topological metamaterials publication-title: PNAS doi: 10.1073/pnas.1502939112 – year: 2016 ident: 10.1016/j.matdes.2019.108242_bb0220 – volume: 60 start-page: 715 year: 2013 ident: 10.1016/j.matdes.2019.108242_bb0080 article-title: Auxetic Textiles publication-title: Acta Chim. Slov. – year: 2017 ident: 10.1016/j.matdes.2019.108242_bb0090 article-title: Potential and origami-based shell elements as next-generation envelope components – ident: 10.1016/j.matdes.2019.108242_bb0200 – volume: 5 issue: 8395 year: 2014 ident: 10.1016/j.matdes.2019.108242_bb0005 article-title: Hierarchical auxetic mechanical metamaterials publication-title: Sci. Rep. – volume: 114 start-page: 185502(5) issue: 18 year: 2015 ident: 10.1016/j.matdes.2019.108242_bb0115 article-title: Reentrant origami-based metamaterials with negative Poisson's ratio and bistability publication-title: Phys. Rev. Lett. doi: 10.1103/PhysRevLett.114.185502 – volume: 39 start-page: 3269 year: 2004 ident: 10.1016/j.matdes.2019.108242_bb0030 article-title: Review on auxetic materials publication-title: J. Mater. Sci. doi: 10.1023/B:JMSC.0000026928.93231.e0 – volume: 8 year: 2016 ident: 10.1016/j.matdes.2019.108242_bb0060 article-title: Kinematic analysis of congruent multilayer tessellations publication-title: J. Mech. Robot. doi: 10.1115/1.4032203 – year: 2011 ident: 10.1016/j.matdes.2019.108242_bb0170 – volume: 115 start-page: 311 year: 2017 ident: 10.1016/j.matdes.2019.108242_bb0010 article-title: Crush dynamics and transient deformations of elastic-plastic Miura-ori core sandwich plates publication-title: Thin-Walled Struct. doi: 10.1016/j.tws.2017.02.021 – volume: 249 start-page: 1347 issue: 7 year: 2011 ident: 10.1016/j.matdes.2019.108242_bb0045 article-title: Mechanical characterisation of a periodic auxetic structures produced by SEBM publication-title: Phys. Status Solidi doi: 10.1002/pssb.201084211 – volume: 26 year: 2017 ident: 10.1016/j.matdes.2019.108242_bb0155 article-title: Development and modeling of mulit-phase polymeric organic inspired architecture by using pre-molded geometrical features publication-title: Smart Mater. Struct. doi: 10.1088/1361-665X/26/2/025012 – volume: 2 issue: 24 year: 2015 ident: 10.1016/j.matdes.2019.108242_bb0065 article-title: Chiral metamaterials: enhancement and control of optical activity and circular dichroism publication-title: Nano Convergence – year: 2015 ident: 10.1016/j.matdes.2019.108242_bb0225 – volume: 6 issue: 31067 year: 2016 ident: 10.1016/j.matdes.2019.108242_bb0105 article-title: Shape morphing Kirigami mechanical metanaterials publication-title: Sci. Rep. – volume: 26 start-page: 1 year: 2017 ident: 10.1016/j.matdes.2019.108242_bb0150 article-title: Carbon nano fibers reinforced composties origami inspired mechanical metamateirals with passive and active properties publication-title: Smart Mater. Struct. doi: 10.1088/1361-665X/aa8832 – volume: 22 year: 2013 ident: 10.1016/j.matdes.2019.108242_bb0180 article-title: Smart metamaterials with tunable auxetic and other properties publication-title: Smart Mater. Struct. doi: 10.1088/0964-1726/22/8/084016 – start-page: 144 issue: 115 year: 2017 ident: 10.1016/j.matdes.2019.108242_bb0130 article-title: On the design of origami structures with a continuum of equilibrium shapes publication-title: Composites Part B doi: 10.1016/j.compositesb.2016.10.023 – volume: 7 start-page: 291 year: 2017 ident: 10.1016/j.matdes.2019.108242_bb0160 article-title: Design consideration for additive manufacturing: fused deposition modelling publication-title: Open J. Appl. Sci. doi: 10.4236/ojapps.2017.76024 – volume: 99 start-page: 130 year: 2015 ident: 10.1016/j.matdes.2019.108242_bb0135 article-title: Deformation of the Miura-ori patterned sheet publication-title: Int. J. Mech. Sci. doi: 10.1016/j.ijmecsci.2015.05.009 – volume: 8 start-page: 1557 year: 2016 ident: 10.1016/j.matdes.2019.108242_bb0040 article-title: Design and properties of 3D-printed chiral auxetic metamaterials by reconfigurable connections publication-title: Phys. Status Solidi doi: 10.1002/pssb.201600027 – volume: 4 year: 2014 ident: 10.1016/j.matdes.2019.108242_bb0145 article-title: Origami based mechanical metamaterials publication-title: Sci. Rep. doi: 10.1038/srep05979 – volume: 2 year: 2015 ident: 10.1016/j.matdes.2019.108242_bb0175 article-title: Rigidly foldable origami gadgets and tessellations publication-title: R. Soc. Open Sci. doi: 10.1098/rsos.150067 – start-page: 253 year: 2011 ident: 10.1016/j.matdes.2019.108242_bb0210 |
| SSID | ssj0022734 |
| Score | 2.5118449 |
| Snippet | Two novel, origami-inspired, metamaterials were designed, mechanically tested, and modelled. One novel origami model was folded using a triangular based crease... |
| SourceID | doaj crossref elsevier |
| SourceType | Open Website Enrichment Source Index Database Publisher |
| StartPage | 108242 |
| SubjectTerms | Compression Finite element modelling Fused deposition modelling Impact Metamaterial Origami |
| Title | Novel origami-inspired metamaterials: Design, mechanical testing and finite element modelling |
| URI | https://dx.doi.org/10.1016/j.matdes.2019.108242 https://doaj.org/article/e7788fd72ac9472291689842faac4715 |
| Volume | 186 |
| WOSCitedRecordID | wos000505221700071&url=https%3A%2F%2Fcvtisr.summon.serialssolutions.com%2F%23%21%2Fsearch%3Fho%3Df%26include.ft.matches%3Dt%26l%3Dnull%26q%3D |
| hasFullText | 1 |
| inHoldings | 1 |
| isFullTextHit | |
| isPrint | |
| journalDatabaseRights | – providerCode: PRVAON databaseName: DOAJ Directory of Open Access Journals customDbUrl: eissn: 1873-4197 dateEnd: 99991231 omitProxy: false ssIdentifier: ssj0022734 issn: 0264-1275 databaseCode: DOA dateStart: 20190101 isFulltext: true titleUrlDefault: https://www.doaj.org/ providerName: Directory of Open Access Journals – providerCode: PRVESC databaseName: Elsevier SD Freedom Collection Journals 2021 customDbUrl: eissn: 1873-4197 dateEnd: 99991231 omitProxy: false ssIdentifier: ssj0022734 issn: 0264-1275 databaseCode: AIEXJ dateStart: 20181205 isFulltext: true titleUrlDefault: https://www.sciencedirect.com providerName: Elsevier |
| link | http://cvtisr.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwrV07T8MwELYQMMCAeIrykgdGIpzUwTEbTwFDxQBSFxSdzw4KalNUAr8fX5xUZYGFJYMV29HdJf4u_vwdY8fKwRkaE_u0BDCSKb1zRHJUymQCRWYBbFNsQg0G2XCoH-dKfREnLMgDB8OdOuWTtMKqBFCTsKGHM5nOZFIAoP-wNuqlHvV0yVSbapFoS_i7Qqp8Ku0OzTXMLg8FrSOp7lgTxS6RyY9FqdHun1ub5tab23W21gJFfhEecIMtuGqTrc7JB26xl8Hky4041baCcRmVFe2aO8vHrgY_e4itc37dkDROfDOd8iWn8Jq0NapXDpXlRUmwk7vAI-dNaRw6o77Nnm9vnq7uorZcQoQyzupIWWW1E6hMWvRp9wtoj7JA4w2HskgRUi0TfzVKaGFTnUoFiYmF8921xf4OW6wmldtlHJwfCKRRMaLsC9QxgvAuBYNgHBQ91u_slWOrJU4lLUZ5Rxp7y4OVc7JyHqzcY9Gs13vQ0vjj_ktyxexeUsJuGnx85G185H_FR4-pzpF5CyoCWPBDlb9Ov_cf0--zlYQydBFHcXrAFuvppztky_hVlx_TI7Z0cX8zfDhqgvcbySDygw |
| linkProvider | Directory of Open Access Journals |
| openUrl | ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Novel+origami-inspired+metamaterials%3A+Design%2C+mechanical+testing+and+finite+element+modelling&rft.jtitle=Materials+%26+design&rft.au=Wickeler%2C+Anastasia+L.&rft.au=Naguib%2C+Hani+E.&rft.date=2020-01-15&rft.pub=Elsevier+Ltd&rft.issn=0264-1275&rft.eissn=1873-4197&rft.volume=186&rft_id=info:doi/10.1016%2Fj.matdes.2019.108242&rft.externalDocID=S026412751930680X |
| thumbnail_l | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=0264-1275&client=summon |
| thumbnail_m | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=0264-1275&client=summon |
| thumbnail_s | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=0264-1275&client=summon |