Additive manufacturing of continuous fibre reinforced thermoplastic composites using fused deposition modelling: Effect of process parameters on mechanical properties
Continuous Fibre Reinforced Thermoplastic Composites (CFRTPCs) are becoming alternative materials to replace the conventional thermosetting polymers and metals due to excellent mechanical performance, recycling and potential used in lightweight structures. Fused deposition modelling (FDM) is a promi...
Uložené v:
| Vydané v: | Composites science and technology Ročník 181; s. 107688 |
|---|---|
| Hlavní autori: | , , , , , |
| Médium: | Journal Article |
| Jazyk: | English |
| Vydavateľské údaje: |
Barking
Elsevier Ltd
08.09.2019
Elsevier BV |
| Predmet: | |
| ISSN: | 0266-3538, 1879-1050 |
| On-line prístup: | Získať plný text |
| Tagy: |
Pridať tag
Žiadne tagy, Buďte prvý, kto otaguje tento záznam!
|
| Abstract | Continuous Fibre Reinforced Thermoplastic Composites (CFRTPCs) are becoming alternative materials to replace the conventional thermosetting polymers and metals due to excellent mechanical performance, recycling and potential used in lightweight structures. Fused deposition modelling (FDM) is a promising additive manufacturing technology and an alternative of conventional processes for the fabrication of CFRTPCs due to its ability to build functional parts having complex geometries. The mechanical properties of a built part depend on several process parameters. The aim of this study is to characterize the effect of build orientation, layer thickness and fibre volume content on the mechanical performance of 3D printed continuous fibre reinforced composites components manufactured by a desktop 3D printer. Tensile and three-point bending tests are carried out to determine the mechanical response of the printed specimens. SEM images of fractured surfaces are evaluated to determine the effects of process parameters on failure modes.
It is observed that the effect of layer thickness of nylon samples on the mechanical performance is marginally significant. In addition, continuous fibre reinforced samples show higher strength and stiffness values than unreinforced ones. The results show that carbon fibre reinforced composites exhibit the best mechanical performance with higher stiffness and flat samples exhibit higher values of strength and stiffness than on-edge samples. Additionally, the results show that strength and stiffness increase as fibre volume content increases in most cases but, conversely, the level of increment in mechanical performance is moderate with continued rise in fibre content, particularly in the case of Kevlar® and glass fibres, due to weak bonding between the fibre/nylon layers as well as the presence of increased levels of defects. Finally, the practicality of the results is assessed by testing an evaluation structure. |
|---|---|
| AbstractList | Continuous Fibre Reinforced Thermoplastic Composites (CFRTPCs) are becoming alternative materials to replace the conventional thermosetting polymers and metals due to excellent mechanical performance, recycling and potential used in lightweight structures. Fused deposition modelling (FDM) is a promising additive manufacturing technology and an alternative of conventional processes for the fabrication of CFRTPCs due to its ability to build functional parts having complex geometries. The mechanical properties of a built part depend on several process parameters. The aim of this study is to characterize the effect of build orientation, layer thickness and fibre volume content on the mechanical performance of 3D printed continuous fibre reinforced composites components manufactured by a desktop 3D printer. Tensile and three-point bending tests are carried out to determine the mechanical response of the printed specimens. SEM images of fractured surfaces are evaluated to determine the effects of process parameters on failure modes. It is observed that the effect of layer thickness of nylon samples on the mechanical performance is marginally significant. In addition, continuous fibre reinforced samples show higher strength and stiffness values than unreinforced ones. The results show that carbon fibre reinforced composites exhibit the best mechanical performance with higher stiffness and flat samples exhibit higher values of strength and stiffness than on-edge samples. Additionally, the results show that strength and stiffness increase as fibre volume content increases in most cases but, conversely, the level of increment in mechanical performance is moderate with continued rise in fibre content, particularly in the case of Kevlar® and glass fibres, due to weak bonding between the fibre/nylon layers as well as the presence of increased levels of defects. Finally, the practicality of the results is assessed by testing an evaluation structure. Continuous Fibre Reinforced Thermoplastic Composites (CFRTPCs) are becoming alternative materials to replace the conventional thermosetting polymers and metals due to excellent mechanical performance, recycling and potential used in lightweight structures. Fused deposition modelling (FDM) is a promising additive manufacturing technology and an alternative of conventional processes for the fabrication of CFRTPCs due to its ability to build functional parts having complex geometries. The mechanical properties of a built part depend on several process parameters. The aim of this study is to characterize the effect of build orientation, layer thickness and fibre volume content on the mechanical performance of 3D printed continuous fibre reinforced composites components manufactured by a desktop 3D printer. Tensile and three-point bending tests are carried out to determine the mechanical response of the printed specimens. SEM images of fractured surfaces are evaluated to determine the effects of process parameters on failure modes. It is observed that the effect of layer thickness of nylon samples on the mechanical performance is marginally significant. In addition, continuous fibre reinforced samples show higher strength and stiffness values than unreinforced ones. The results show that carbon fibre reinforced composites exhibit the best mechanical performance with higher stiffness and flat samples exhibit higher values of strength and stiffness than on-edge samples. Additionally, the results show that strength and stiffness increase as fibre volume content increases in most cases but, conversely, the level of increment in mechanical performance is moderate with continued rise in fibre content, particularly in the case of Kevlar® and glass fibres, due to weak bonding between the fibre/nylon layers as well as the presence of increased levels of defects. Finally, the practicality of the results is assessed by testing an evaluation structure. |
| ArticleNumber | 107688 |
| Author | Chacón, J.M. Caminero, M.A. García-Plaza, E. García-Moreno, I. Reverte, J.M. Núñez, P.J. |
| Author_xml | – sequence: 1 givenname: J.M. surname: Chacón fullname: Chacón, J.M. organization: Escuela Técnica Superior de Ingenieros Industriales, IMACI, Universidad de Castilla-La Mancha. Avda, Camilo José Cela s/n, 13005, Ciudad Real, Spain – sequence: 2 givenname: M.A. surname: Caminero fullname: Caminero, M.A. email: miguelangel.caminero@uclm.es organization: Escuela Técnica Superior de Ingenieros Industriales, INEI, Universidad de Castilla-La Mancha. Avda, Camilo José Cela s/n, 13005, Ciudad Real, Spain – sequence: 3 givenname: P.J. surname: Núñez fullname: Núñez, P.J. organization: Escuela Técnica Superior de Ingenieros Industriales, INEI, Universidad de Castilla-La Mancha. Avda, Camilo José Cela s/n, 13005, Ciudad Real, Spain – sequence: 4 givenname: E. surname: García-Plaza fullname: García-Plaza, E. organization: Escuela Técnica Superior de Ingenieros Industriales, INEI, Universidad de Castilla-La Mancha. Avda, Camilo José Cela s/n, 13005, Ciudad Real, Spain – sequence: 5 givenname: I. surname: García-Moreno fullname: García-Moreno, I. organization: Escuela Técnica Superior de Ingenieros Industriales, INEI, Universidad de Castilla-La Mancha. Avda, Camilo José Cela s/n, 13005, Ciudad Real, Spain – sequence: 6 givenname: J.M. surname: Reverte fullname: Reverte, J.M. organization: Escuela Técnica Superior de Ingenieros Industriales, IMACI, Universidad de Castilla-La Mancha. Avda, Camilo José Cela s/n, 13005, Ciudad Real, Spain |
| BookMark | eNqNUctuHCEQRJEjZe3kH4hyng0wLyYXy1rZjiVLviRnxDRNzGoGxsBYyg_lO8Nkc7B88gWk7uqq7qpzcuaDR0I-c7bnjHdfj3sI85LAZYTHvWB8KPW-k_Id2XHZDxVnLTsjOya6rqrbWn4g5ykdGWN9O4gd-XNljMvuGems_Wo15DU6_4sGSyH47Pwa1kStGyPSiM7bEAENzY8Y57BMOmUHdFshpLJComvapu2aCsjgv6oLns7B4DSV1jd6bS1C3gSWGABToouOesaMMdENWg7R3oGeNsCCMTtMH8l7q6eEn_7_F-TnzfWPw_fq_uH27nB1X0HDRa7aehwb6G0LctCyadq6MYA4CNOBRlaLEcpr0SDTZuDdyHkvhbCm0VLL0dYX5MuJt0g_rZiyOoY1-iKphCi21qwemoK6PKEghpQiWlX819uhOWo3Kc7UFo46qhfhqC0cdQqnMAyvGJboZh1_v2n2cJrFYsSzw6gKCn2JxcXirDLBvYHlL83zuq4 |
| CitedBy_id | crossref_primary_10_1080_2374068X_2021_1912527 crossref_primary_10_1016_j_conbuildmat_2022_127842 crossref_primary_10_1016_j_compositesb_2023_110903 crossref_primary_10_1002_eng2_12807 crossref_primary_10_3390_polym16081106 crossref_primary_10_1016_j_ijimpeng_2022_104320 crossref_primary_10_1108_RPJ_04_2023_0121 crossref_primary_10_1007_s11668_024_01946_2 crossref_primary_10_1002_adfm_202210353 crossref_primary_10_1002_pol_20200011 crossref_primary_10_1016_j_coco_2022_101338 crossref_primary_10_1002_pc_26281 crossref_primary_10_1177_15280837211064937 crossref_primary_10_3390_jcs6050128 crossref_primary_10_1007_s41939_024_00529_w crossref_primary_10_1016_j_jmapro_2024_04_083 crossref_primary_10_1016_j_compstruct_2021_115033 crossref_primary_10_3390_polym12081783 crossref_primary_10_1016_j_compscitech_2023_109955 crossref_primary_10_1177_09544062241262255 crossref_primary_10_1016_j_compscitech_2021_108741 crossref_primary_10_1002_pc_27498 crossref_primary_10_1007_s11665_023_08572_3 crossref_primary_10_3390_polym16162306 crossref_primary_10_1016_j_jallcom_2020_158046 crossref_primary_10_1016_j_compositesa_2024_108657 crossref_primary_10_1177_00219983241289491 crossref_primary_10_1016_j_compositesa_2024_108538 crossref_primary_10_1177_09673911221098734 crossref_primary_10_1016_j_jfoodeng_2024_111964 crossref_primary_10_1080_00405000_2025_2539649 crossref_primary_10_1007_s10751_024_02075_w crossref_primary_10_1080_2374068X_2022_2106655 crossref_primary_10_1016_j_jmapro_2023_09_071 crossref_primary_10_1080_15376494_2020_1821266 crossref_primary_10_1016_j_jmapro_2025_04_014 crossref_primary_10_1002_pc_26275 crossref_primary_10_3390_jmmp8050226 crossref_primary_10_1007_s10853_021_06111_w crossref_primary_10_1016_j_polymertesting_2024_108459 crossref_primary_10_1002_vnl_21766 crossref_primary_10_3390_ma15051820 crossref_primary_10_3390_polym13071147 crossref_primary_10_1002_pc_26712 crossref_primary_10_1002_pc_25744 crossref_primary_10_1002_pc_29427 crossref_primary_10_1016_j_bioactmat_2020_02_006 crossref_primary_10_1016_j_compositesa_2022_107315 crossref_primary_10_1089_3dp_2023_0173 crossref_primary_10_1016_j_tws_2020_107228 crossref_primary_10_1002_pen_25353 crossref_primary_10_1016_j_medengphy_2023_104075 crossref_primary_10_1016_j_compstruct_2021_113626 crossref_primary_10_1016_j_compstruct_2020_112610 crossref_primary_10_1016_j_compstruct_2021_114952 crossref_primary_10_1016_j_polymertesting_2021_107181 crossref_primary_10_1515_epoly_2023_0114 crossref_primary_10_1016_j_compstruct_2021_113744 crossref_primary_10_1007_s00170_023_11569_w crossref_primary_10_1016_j_addma_2023_103680 crossref_primary_10_1016_j_compositesb_2024_111262 crossref_primary_10_1016_j_addma_2025_104853 crossref_primary_10_1016_j_envpol_2022_120549 crossref_primary_10_1007_s11665_024_09144_9 crossref_primary_10_3390_polym15092011 crossref_primary_10_1002_pc_28000 crossref_primary_10_1007_s10163_023_01701_z crossref_primary_10_1016_j_compositesa_2021_106416 crossref_primary_10_1016_j_amf_2024_200156 crossref_primary_10_32604_jrm_2022_016374 crossref_primary_10_1016_j_tws_2025_113750 crossref_primary_10_1177_00219983221127182 crossref_primary_10_1108_RPJ_10_2020_0250 crossref_primary_10_3390_su12093568 crossref_primary_10_1016_j_rser_2023_114150 crossref_primary_10_1016_j_polymertesting_2020_106860 crossref_primary_10_1111_ijac_13798 crossref_primary_10_1016_j_coco_2020_100478 crossref_primary_10_1016_j_coco_2025_102279 crossref_primary_10_1177_0731684420963217 crossref_primary_10_1016_j_apacoust_2024_110476 crossref_primary_10_1016_j_compstruct_2021_113854 crossref_primary_10_1016_j_rineng_2025_105408 crossref_primary_10_1177_14644207251366473 crossref_primary_10_1016_j_compstruct_2023_117227 crossref_primary_10_1002_pc_27380 crossref_primary_10_1016_j_compstruct_2024_118607 crossref_primary_10_1016_j_jeurceramsoc_2023_09_055 crossref_primary_10_3390_jmse11020334 crossref_primary_10_1016_j_compositesb_2024_111397 crossref_primary_10_1007_s42405_025_00925_7 crossref_primary_10_1016_j_compositesa_2023_107655 crossref_primary_10_1016_j_compositesb_2020_108220 crossref_primary_10_1016_j_coco_2023_101532 crossref_primary_10_1016_j_compositesb_2021_109277 crossref_primary_10_1007_s00170_023_12503_w crossref_primary_10_1016_j_addma_2024_103978 crossref_primary_10_1016_j_compstruct_2025_119158 crossref_primary_10_1016_j_compositesb_2021_108865 crossref_primary_10_1039_D5TB00449G crossref_primary_10_1002_app_56431 crossref_primary_10_1007_s13369_022_07539_1 crossref_primary_10_1016_j_istruc_2023_01_034 crossref_primary_10_1007_s00170_020_05205_0 crossref_primary_10_1016_j_compositesb_2020_108460 crossref_primary_10_18321_cpc333 crossref_primary_10_1007_s40964_022_00284_9 crossref_primary_10_1016_j_tws_2024_112406 crossref_primary_10_3390_jcs8090364 crossref_primary_10_1016_j_compstruct_2023_117133 crossref_primary_10_1016_j_polymertesting_2023_107972 crossref_primary_10_1016_j_addma_2022_103346 crossref_primary_10_1016_j_mtcomm_2024_110468 crossref_primary_10_3390_polym15102403 crossref_primary_10_1016_j_jsamd_2025_100966 crossref_primary_10_1080_17452759_2022_2074698 crossref_primary_10_3390_polym15051252 crossref_primary_10_1016_j_compositesa_2022_107126 crossref_primary_10_1108_RPJ_01_2021_0003 crossref_primary_10_1002_app_53296 crossref_primary_10_1080_10426914_2020_1866195 crossref_primary_10_1088_2631_6331_ac8d7a crossref_primary_10_1177_07316844211051746 crossref_primary_10_1007_s40964_022_00296_5 crossref_primary_10_3390_polym13030476 crossref_primary_10_1016_j_ijmecsci_2024_108967 crossref_primary_10_3390_polym13050789 crossref_primary_10_3390_polym17081097 crossref_primary_10_1177_0892705720953193 crossref_primary_10_1016_j_addma_2020_101394 crossref_primary_10_3390_polym14020301 crossref_primary_10_1088_1361_665X_ac95e4 crossref_primary_10_1002_app_54276 crossref_primary_10_1016_j_compscitech_2020_108096 crossref_primary_10_1016_j_compscitech_2019_107905 crossref_primary_10_1177_07316844251345653 crossref_primary_10_1016_j_jmapro_2024_10_008 crossref_primary_10_1007_s11665_025_11893_0 crossref_primary_10_1016_j_euromechsol_2024_105349 crossref_primary_10_1016_j_istruc_2022_10_134 crossref_primary_10_1177_07316844241273038 crossref_primary_10_1016_j_ijsolstr_2023_112328 crossref_primary_10_1134_S2075113325701011 crossref_primary_10_3390_ma13081924 crossref_primary_10_1016_j_addma_2024_104490 crossref_primary_10_1002_app_49152 crossref_primary_10_1002_pc_29895 crossref_primary_10_1177_00219983221092843 crossref_primary_10_1016_j_jmapro_2022_12_025 crossref_primary_10_3390_jcs5120325 crossref_primary_10_1002_adem_202401923 crossref_primary_10_1002_app_53989 crossref_primary_10_1007_s00170_023_11161_2 crossref_primary_10_3390_polym12102220 crossref_primary_10_1016_j_compositesb_2021_108652 crossref_primary_10_1016_j_compositesb_2020_107820 crossref_primary_10_1016_j_compositesa_2024_108231 crossref_primary_10_1016_j_compositesb_2023_110992 crossref_primary_10_1080_14328917_2023_2196480 crossref_primary_10_1016_j_compositesb_2021_108891 crossref_primary_10_1016_j_matpr_2023_05_124 crossref_primary_10_1016_j_compositesb_2025_112738 crossref_primary_10_1016_j_jmbbm_2021_104455 crossref_primary_10_1186_s10033_023_00982_7 crossref_primary_10_1016_j_jmapro_2024_10_003 crossref_primary_10_1002_pat_6435 crossref_primary_10_3390_app12136687 crossref_primary_10_1016_j_matdes_2023_112411 crossref_primary_10_1177_14644207241243298 crossref_primary_10_1007_s40033_022_00426_x crossref_primary_10_1016_j_addma_2019_100884 crossref_primary_10_1177_09544089231156068 crossref_primary_10_1016_j_addma_2023_103936 crossref_primary_10_2478_msp_2024_0003 crossref_primary_10_1016_j_cja_2024_11_027 crossref_primary_10_1016_j_polymertesting_2022_107767 crossref_primary_10_3390_polym17131865 crossref_primary_10_1007_s11668_022_01399_5 crossref_primary_10_1016_j_compositesb_2022_110463 crossref_primary_10_1088_2053_1591_abcc5d crossref_primary_10_1108_RPJ_06_2020_0120 crossref_primary_10_1051_smdo_2020012 crossref_primary_10_3390_polym14142923 crossref_primary_10_1016_j_coco_2024_102145 crossref_primary_10_1016_j_compositesa_2024_108263 crossref_primary_10_1016_j_matdes_2022_110806 crossref_primary_10_3390_ma13010028 crossref_primary_10_1007_s00170_021_08289_4 crossref_primary_10_1007_s40964_024_00566_4 crossref_primary_10_1016_j_compstruct_2021_114337 crossref_primary_10_3390_ma15155405 crossref_primary_10_1016_j_compscitech_2020_108502 crossref_primary_10_3390_polym16212986 crossref_primary_10_1007_s42823_022_00358_2 crossref_primary_10_1108_RPJ_02_2023_0062 crossref_primary_10_1016_j_compstruct_2023_117176 crossref_primary_10_3390_polym17131735 crossref_primary_10_1016_j_addma_2020_101102 crossref_primary_10_1002_pc_70273 crossref_primary_10_1016_j_compscitech_2024_110723 crossref_primary_10_3390_polym12091993 crossref_primary_10_1016_j_addma_2020_101109 crossref_primary_10_1088_2631_8695_ad5e5d crossref_primary_10_1016_j_compositesb_2021_108671 crossref_primary_10_1016_j_compscitech_2025_111079 crossref_primary_10_3390_polym14030426 crossref_primary_10_1016_j_compositesb_2020_108373 crossref_primary_10_1007_s00170_022_10398_7 crossref_primary_10_1002_pc_29021 crossref_primary_10_1016_j_coco_2021_100907 crossref_primary_10_1080_15376494_2024_2323675 crossref_primary_10_1016_j_polymertesting_2023_107944 crossref_primary_10_3390_ma15238698 crossref_primary_10_1002_pc_28614 crossref_primary_10_3390_polym16121622 crossref_primary_10_1088_1361_665X_ac3b20 crossref_primary_10_1002_pc_29943 crossref_primary_10_1007_s10443_024_10207_2 crossref_primary_10_1016_j_compositesa_2023_107434 crossref_primary_10_1108_RPJ_04_2022_0135 crossref_primary_10_1016_j_compositesa_2024_108601 crossref_primary_10_1016_j_triboint_2023_108762 crossref_primary_10_3390_polym14061172 crossref_primary_10_1007_s42114_024_01035_w crossref_primary_10_3390_polym16152138 crossref_primary_10_1016_j_compositesb_2024_111415 crossref_primary_10_1007_s11665_025_11934_8 crossref_primary_10_1002_pat_6128 crossref_primary_10_1016_j_addma_2024_104054 crossref_primary_10_1016_j_ijlmm_2025_02_008 crossref_primary_10_1002_pc_26582 crossref_primary_10_1016_j_compositesb_2024_112078 crossref_primary_10_1016_j_tafmec_2025_105248 crossref_primary_10_3390_polym16182656 crossref_primary_10_1177_0731684421998017 crossref_primary_10_1002_app_53304 crossref_primary_10_1016_j_addma_2021_102035 crossref_primary_10_1016_j_polymertesting_2023_108207 crossref_primary_10_3390_ma15010222 crossref_primary_10_1002_pc_28525 crossref_primary_10_1177_00952443211047263 crossref_primary_10_1016_j_compositesb_2022_110139 crossref_primary_10_3390_ma14185173 crossref_primary_10_3390_polym17050624 crossref_primary_10_1016_j_compositesb_2020_108034 crossref_primary_10_1016_j_engfailanal_2024_108121 crossref_primary_10_1108_PRT_01_2024_0005 crossref_primary_10_1002_pat_6242 crossref_primary_10_3390_app14209529 crossref_primary_10_1016_j_compositesa_2023_107562 crossref_primary_10_1016_j_coco_2023_101549 crossref_primary_10_1016_j_compositesa_2022_107384 crossref_primary_10_1016_j_matpr_2023_10_092 crossref_primary_10_1002_pc_28196 crossref_primary_10_3390_jcs3030086 crossref_primary_10_1016_j_compositesa_2024_108150 crossref_primary_10_1007_s40430_023_04408_2 crossref_primary_10_1016_j_compscitech_2022_109603 crossref_primary_10_1016_j_compositesb_2024_112080 crossref_primary_10_3390_polym16212995 crossref_primary_10_1177_14777606221127371 crossref_primary_10_1016_j_compositesb_2020_107858 crossref_primary_10_1016_j_polymertesting_2025_108936 crossref_primary_10_1088_1361_6528_abe825 crossref_primary_10_1177_08927057231200006 crossref_primary_10_3390_polym12061292 crossref_primary_10_1007_s40964_024_00628_7 crossref_primary_10_1007_s11837_022_05382_1 crossref_primary_10_3390_app112311315 crossref_primary_10_1007_s40964_022_00374_8 crossref_primary_10_1016_j_compositesa_2025_108900 crossref_primary_10_3390_ma16237311 crossref_primary_10_3390_polym11101581 crossref_primary_10_1002_pat_6396 crossref_primary_10_1002_pssb_202200423 crossref_primary_10_3390_polym17141902 crossref_primary_10_1007_s41939_023_00207_3 crossref_primary_10_3390_jcs4030098 crossref_primary_10_3390_polym13213757 crossref_primary_10_1007_s10443_022_10099_0 crossref_primary_10_3390_app142210100 crossref_primary_10_1016_j_mechmat_2025_105345 crossref_primary_10_1108_RPJ_05_2024_0189 crossref_primary_10_1007_s40964_024_00718_6 crossref_primary_10_3390_aerospace10030256 crossref_primary_10_1016_j_compstruct_2022_115631 crossref_primary_10_1016_j_compositesa_2020_105985 crossref_primary_10_1016_j_compstruct_2022_116167 crossref_primary_10_1016_j_matpr_2022_08_527 crossref_primary_10_1007_s00170_023_12823_x crossref_primary_10_1088_1742_6596_1906_1_012053 crossref_primary_10_1007_s00170_021_06837_6 crossref_primary_10_1016_j_compositesa_2023_107805 crossref_primary_10_1007_s40964_023_00479_8 crossref_primary_10_3390_ma15145079 crossref_primary_10_1007_s11029_021_09954_1 crossref_primary_10_1177_08927057231223925 crossref_primary_10_1016_j_matdes_2021_110163 crossref_primary_10_1007_s11837_023_06041_9 crossref_primary_10_1108_RPJ_01_2024_0003 crossref_primary_10_1016_j_addma_2021_101842 crossref_primary_10_1002_slct_202102790 crossref_primary_10_1016_j_compositesb_2023_110815 crossref_primary_10_1016_j_jclepro_2024_140598 crossref_primary_10_1080_15376494_2023_2246191 crossref_primary_10_3390_ma14030552 crossref_primary_10_1016_j_compositesb_2020_108175 crossref_primary_10_1016_j_matdes_2021_109863 crossref_primary_10_1016_j_polymertesting_2025_108794 crossref_primary_10_1016_j_indcrop_2021_113760 crossref_primary_10_1177_09544062231190534 crossref_primary_10_1016_j_compscitech_2020_108259 crossref_primary_10_1016_j_compstruct_2023_117644 crossref_primary_10_1016_j_compositesb_2021_108903 crossref_primary_10_1177_26349833241301803 crossref_primary_10_1016_j_addma_2022_102763 crossref_primary_10_1016_j_cjmeam_2023_100090 crossref_primary_10_1002_vnl_21960 crossref_primary_10_1016_j_cjmeam_2023_100092 crossref_primary_10_3390_jcs9040186 crossref_primary_10_3390_polym14071292 crossref_primary_10_1016_j_compositesb_2021_109332 crossref_primary_10_1016_j_compscitech_2021_109182 crossref_primary_10_1080_20550340_2024_2387422 crossref_primary_10_1097_PXR_0000000000000384 crossref_primary_10_1016_j_compositesa_2024_108085 crossref_primary_10_59761_RCR5103 crossref_primary_10_1002_pc_30002 crossref_primary_10_1007_s40964_024_00569_1 crossref_primary_10_1016_j_compositesa_2023_107594 crossref_primary_10_1016_j_compstruct_2022_116027 crossref_primary_10_1002_adma_202102877 crossref_primary_10_1038_s41598_025_01556_4 crossref_primary_10_1108_RPJ_12_2024_0515 crossref_primary_10_1002_pc_26781 crossref_primary_10_1016_j_polymertesting_2020_106925 crossref_primary_10_1108_RPJ_01_2022_0023 crossref_primary_10_1007_s10853_024_09925_6 crossref_primary_10_3390_polym15071708 crossref_primary_10_1016_j_addma_2021_102112 crossref_primary_10_1016_j_compositesb_2022_110292 crossref_primary_10_3390_jmmp9090286 crossref_primary_10_1016_j_addma_2020_101661 crossref_primary_10_1016_j_compositesb_2022_109766 crossref_primary_10_1016_j_addma_2021_102359 crossref_primary_10_1002_pc_70334 crossref_primary_10_1016_j_compstruct_2024_118371 crossref_primary_10_1007_s12289_022_01682_8 crossref_primary_10_3390_polym15143110 crossref_primary_10_1002_pat_5991 crossref_primary_10_1016_j_compstruct_2022_115853 crossref_primary_10_1016_j_jmapro_2024_02_026 crossref_primary_10_1016_j_coco_2025_102591 crossref_primary_10_1088_2053_1591_ad62c0 crossref_primary_10_1007_s00170_021_06997_5 crossref_primary_10_1007_s40430_023_04637_5 crossref_primary_10_3390_ma14081885 crossref_primary_10_3390_polym15173653 crossref_primary_10_1016_j_addma_2022_103077 crossref_primary_10_3390_jcs5010029 |
| Cites_doi | 10.1016/j.polymertesting.2017.03.016 10.1016/j.matdes.2017.11.027 10.1177/0731684417695648 10.1016/j.compositesb.2015.06.013 10.1016/j.matdes.2015.11.009 10.1016/j.compstruct.2016.07.018 10.1108/RPJ-08-2015-0098 10.1177/0021998318762297 10.1016/j.addma.2016.11.007 10.1089/3dp.2015.0036 10.1016/j.matdes.2017.03.065 10.1016/j.compositesb.2017.12.007 10.1016/j.compstruct.2017.11.052 10.1016/j.compositesa.2016.05.032 10.1016/j.jmatprotec.2016.07.025 10.1108/RPJ-09-2014-0135 10.1016/j.compositesb.2016.11.034 10.1016/j.compositesb.2017.05.013 10.1016/j.compstruct.2015.12.054 10.1016/j.addma.2018.02.023 10.1016/j.addma.2017.12.002 10.1038/srep23058 10.1007/s11668-016-0113-2 10.1016/j.addma.2018.10.033 10.1007/s11665-016-2459-8 10.1016/j.matdes.2015.06.074 10.1177/0021998316646169 10.1016/j.compstruct.2018.03.051 10.1016/j.matdes.2014.02.038 10.1016/j.addma.2018.05.007 10.1016/j.cad.2015.04.001 10.1016/j.compositesa.2018.09.001 10.1016/j.matdes.2014.10.029 10.1016/j.matdes.2017.10.021 10.1108/RPJ-06-2012-0052 10.1016/j.polymertesting.2017.11.004 10.1016/j.promfg.2018.07.090 10.1016/j.matdes.2017.03.051 10.1016/j.compositesa.2018.07.029 10.1504/IJRAPIDM.2017.082152 10.4236/ojcm.2016.61003 10.1007/s00170-016-9891-7 10.1016/j.compositesb.2017.11.018 10.1016/j.addma.2018.04.039 10.1016/j.compstruct.2017.08.088 10.1016/j.polymertesting.2018.04.038 10.1016/j.compositesb.2018.04.054 10.1016/j.compstruct.2017.10.080 10.1016/j.addma.2017.06.004 10.1016/j.matdes.2017.01.050 10.1016/j.compscitech.2014.10.009 10.1016/j.polymertesting.2007.06.002 10.1016/j.compstruct.2015.10.019 |
| ContentType | Journal Article |
| Copyright | 2019 Elsevier Ltd Copyright Elsevier BV Sep 8, 2019 |
| Copyright_xml | – notice: 2019 Elsevier Ltd – notice: Copyright Elsevier BV Sep 8, 2019 |
| DBID | AAYXX CITATION 7SR 8FD JG9 |
| DOI | 10.1016/j.compscitech.2019.107688 |
| DatabaseName | CrossRef Engineered Materials Abstracts Technology Research Database Materials Research Database |
| DatabaseTitle | CrossRef Materials Research Database Technology Research Database Engineered Materials Abstracts |
| DatabaseTitleList | Materials Research Database |
| DeliveryMethod | fulltext_linktorsrc |
| Discipline | Economics Engineering |
| EISSN | 1879-1050 |
| ExternalDocumentID | 10_1016_j_compscitech_2019_107688 S0266353818313162 |
| GroupedDBID | --K --M .~1 0R~ 1B1 1~. 1~5 4.4 457 4G. 5GY 5VS 7-5 71M 8P~ 9JN AABNK AABXZ AACTN AAEDT AAEDW AAEPC AAIKJ AAKOC AALRI AAOAW AAQFI AAXKI AAXUO ABFNM ABMAC ABXRA ACDAQ ACGFS ACIWK ACRLP ADBBV ADEZE ADTZH AEBSH AECPX AEKER AENEX AEZYN AFKWA AFRZQ AFTJW AGHFR AGUBO AGYEJ AHHHB AHJVU AIEXJ AIKHN AITUG AJOXV AKRWK ALMA_UNASSIGNED_HOLDINGS AMFUW AMRAJ AXJTR BJAXD BKOJK BLXMC CS3 DU5 EBS EFJIC EJD EO8 EO9 EP2 EP3 F5P FDB FIRID FNPLU FYGXN G-Q GBLVA IHE J1W JJJVA KOM LY7 M24 M41 MAGPM MO0 N9A O-L O9- OAUVE OZT P-8 P-9 P2P PC. Q38 RIG RNS ROL RPZ SDF SDG SDP SES SPC SPCBC SSM SST SSZ T5K XPP ZMT ~G- .-4 29F 6TJ 9DU AAQXK AATTM AAYWO AAYXX ABJNI ABWVN ABXDB ACLOT ACNNM ACRPL ACVFH ADCNI ADIYS ADMUD ADNMO AEIPS AEUPX AFJKZ AFPUW AGQPQ AI. AIGII AIIUN AKBMS AKYEP ANKPU APXCP ASPBG AVWKF AZFZN CITATION EFKBS EFLBG FEDTE FGOYB G-2 HVGLF HZ~ R2- SET SEW SMS T9H VH1 WUQ ~HD 7SR 8FD JG9 |
| ID | FETCH-LOGICAL-c412t-53bb4c7f5c89a844534dcee92d6cae032bce03fede0ad916b117822fd4a8a8bf3 |
| ISICitedReferencesCount | 406 |
| ISICitedReferencesURI | http://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=Summon&SrcAuth=ProQuest&DestLinkType=CitingArticles&DestApp=WOS_CPL&KeyUT=000479021000017&url=https%3A%2F%2Fcvtisr.summon.serialssolutions.com%2F%23%21%2Fsearch%3Fho%3Df%26include.ft.matches%3Dt%26l%3Dnull%26q%3D |
| ISSN | 0266-3538 |
| IngestDate | Mon Sep 22 13:41:00 EDT 2025 Sat Nov 29 03:36:39 EST 2025 Tue Nov 18 21:08:22 EST 2025 Tue Dec 03 03:45:23 EST 2024 |
| IsPeerReviewed | true |
| IsScholarly | true |
| Keywords | Mechanical characterization Failure analysis 3D printing Continuous fibre reinforced thermoplastic composites Process parameters Fused deposition modelling |
| Language | English |
| LinkModel | OpenURL |
| MergedId | FETCHMERGED-LOGICAL-c412t-53bb4c7f5c89a844534dcee92d6cae032bce03fede0ad916b117822fd4a8a8bf3 |
| Notes | ObjectType-Article-1 SourceType-Scholarly Journals-1 ObjectType-Feature-2 content type line 14 |
| PQID | 2276830394 |
| PQPubID | 2045270 |
| ParticipantIDs | proquest_journals_2276830394 crossref_citationtrail_10_1016_j_compscitech_2019_107688 crossref_primary_10_1016_j_compscitech_2019_107688 elsevier_sciencedirect_doi_10_1016_j_compscitech_2019_107688 |
| PublicationCentury | 2000 |
| PublicationDate | 2019-09-08 |
| PublicationDateYYYYMMDD | 2019-09-08 |
| PublicationDate_xml | – month: 09 year: 2019 text: 2019-09-08 day: 08 |
| PublicationDecade | 2010 |
| PublicationPlace | Barking |
| PublicationPlace_xml | – name: Barking |
| PublicationTitle | Composites science and technology |
| PublicationYear | 2019 |
| Publisher | Elsevier Ltd Elsevier BV |
| Publisher_xml | – name: Elsevier Ltd – name: Elsevier BV |
| References | Nakagawa, Mori, Maeno (bib15) 2017; 91 Young, Wetmore, Czabaj (bib27) 2018; 22 Chacón, Caminero, García-Plaza, Nuñez (bib7) 2017; 124 Liu, Tian, Zhang, Abliz, Li, Ziegmann (bib41) 2018; 114 Bettini, Alitta, Sala, Landro (bib21) 2017; 26 Sugiyama, Matsuzaki, Ueda, Todoroki, Hirano (bib40) 2018; 113 Dong, Tang, Li, Zhao (bib43) 2018; 26 Domingo, Puigriol, Garcia, Lluma, Borros, Reyes (bib4) 2015; 83 Rankouhi, Javadpour, Delfanian, Letcher (bib6) 2016; 16 Zhang, Cotton, Sun, Heider, Gu, Sun, Chou (bib28) 2018; 137 Li, Li, Liu (bib42) 2016; 238 Tymrak, Kreiger, Pearce (bib1) 2014; 58 van der Klift, Koga, Todoroki, Ueda, Hirano, Matsuzaki (bib24) 2016; 6 Hofstatter, Pedersen, Tosello, Hansen (bib8) 2017; 36 Hao, Liu, Zhou, Chen, Fang (bib39) 2018; 65 Caminero, Chacón, Garcia-Moreno, Reverte (bib25) 2018; 68 Gao, Zhang, Ramanujan, Ramani, Chen, Williams, Wang, Shin, Zhang, Zavattieri (bib19) 2015; 69 Goh, Dikshit, Nagalingam, Goh, Agarwala, Sing, Wei, Yeong (bib47) 2018; 137 Al Abadi, Thai, Paton-Cole, Patel (bib48) 2018; 193 Tian, Liu, Yang, Wang, Li (bib22) 2016; 88 Ning, Cong, Qiu, Wei, Wang (bib33) 2015; 80 Song, Li, Song, Lee, Tagarielli (bib11) 2017; 123 Zaldivar, Witkin, McLouth, Patel, Schmitt, Nokes (bib49) 2017; 13 Blok, Longana, Yu, Woods (bib44) 2018; 22 Matsuzaki, Ueda, Namiki, Joeong, Asahara, Horiguchi, Nakamura, Todoroki, Hirano (bib20) 2016; 6 Lanzotti, Grasso, Staiano, Martorelli (bib53) 2015; 21 Fernandez-Vicente, Calle, Ferrandiz, Conejero (bib56) 2016; 3 Melenka, Cheung, Schofield, Dawson, Carey (bib3) 2016; 153 Liao, Li, Cheng, Xu, Zhu, Jiang, Guo, Chen, Xu, Zhu (bib29) 2018; 139 Ferreira, Amatte, Dutra, Bürger (bib32) 2017; 124 MarkForged (bib52) 2018 Parandoush, Lin (bib9) 2017; 182 Ivey, Melenka, Carey, Ayranci (bib35) 2017; 3 D3039/D3039M (bib54) 2012; 15 Casavola, Cazzato, Moramarco, Pappalettere (bib5) 2016; 90 Aliheidari, Tripuranenia, Ameli, Nadimpalli (bib18) 2017; 60 Dizon, Espera, Chen, Advincula (bib50) 2018; 20 Caminero, Chacón, Garcia-Moreno, Rodriguez (bib26) 2018; 148 Kotlinski (bib12) 2014; 20 Dickson, Barry, McDonnell, Dowling (bib14) 2017; 16 Araya-Calvo, López-Gómez, Chamberlain-Simon, León-Salazar, Guillén-Girón, Corrales-Cordero, Sánchez-Brenes (bib46) 2018; 22 Ning, Cong, Hu, Wang (bib34) 2017; 51 Sugavaneswaran, Arumaikkannu (bib2) 2015; 66 Justo, Tavara, Garcia-Guzman, Paris (bib16) 2018; 185 Tekinalp, Kunc, Velez-Garcia, Duty, Love, Naskar, Blue, Ozcan (bib31) 2014; 105 Türk, Brenni, Zogg, Meboldt (bib30) 2017; 118 Mujika (bib57) 2017; 26 Li, Haigh, Soutis, Gibson, Sloan, Kariman (bib58) 2016 Akhoundi, Behravesh, Bagheri Saed (bib36) 2018 Brooks, Tyas, Molony (bib60) 2017; 6 Agarwal, Kuchipudi, Girard, Houser (bib45) 2018; 52 D790 (bib55) 2010; 10 Yao, Jin, Rhee, Hui, Park (bib13) 2018; 142 Albadi, Thai, Paton-Cole, Patel (bib17) 2018; 193 Sano, Matsuzaki, Ueda, Todoroki, Hirano (bib37) 2018; 24 Quick Release Buckle (bib59) 2018 Yang, Tian, Liu, Cao, Li (bib23) 2017; 23 Caminero, Rodriguez, Muñoz (bib51) 2016; 136 Hou, Tian, Zhang, Li (bib38) 2018; 184 Wang, Jiang, Zhou, Gou, Hui (bib10) 2017; 110 van der Klift (10.1016/j.compscitech.2019.107688_bib24) 2016; 6 Tekinalp (10.1016/j.compscitech.2019.107688_bib31) 2014; 105 Li (10.1016/j.compscitech.2019.107688_bib58) 2016 Ivey (10.1016/j.compscitech.2019.107688_bib35) 2017; 3 D790 (10.1016/j.compscitech.2019.107688_bib55) 2010; 10 Tian (10.1016/j.compscitech.2019.107688_bib22) 2016; 88 Al Abadi (10.1016/j.compscitech.2019.107688_bib48) 2018; 193 Yang (10.1016/j.compscitech.2019.107688_bib23) 2017; 23 Young (10.1016/j.compscitech.2019.107688_bib27) 2018; 22 Matsuzaki (10.1016/j.compscitech.2019.107688_bib20) 2016; 6 Domingo (10.1016/j.compscitech.2019.107688_bib4) 2015; 83 Albadi (10.1016/j.compscitech.2019.107688_bib17) 2018; 193 Quick Release Buckle (10.1016/j.compscitech.2019.107688_bib59) Liao (10.1016/j.compscitech.2019.107688_bib29) 2018; 139 Bettini (10.1016/j.compscitech.2019.107688_bib21) 2017; 26 Zaldivar (10.1016/j.compscitech.2019.107688_bib49) 2017; 13 D3039/D3039M (10.1016/j.compscitech.2019.107688_bib54) 2012; 15 Sugiyama (10.1016/j.compscitech.2019.107688_bib40) 2018; 113 Zhang (10.1016/j.compscitech.2019.107688_bib28) 2018; 137 Dickson (10.1016/j.compscitech.2019.107688_bib14) 2017; 16 Yao (10.1016/j.compscitech.2019.107688_bib13) 2018; 142 Hou (10.1016/j.compscitech.2019.107688_bib38) 2018; 184 Araya-Calvo (10.1016/j.compscitech.2019.107688_bib46) 2018; 22 Melenka (10.1016/j.compscitech.2019.107688_bib3) 2016; 153 Aliheidari (10.1016/j.compscitech.2019.107688_bib18) 2017; 60 Rankouhi (10.1016/j.compscitech.2019.107688_bib6) 2016; 16 Justo (10.1016/j.compscitech.2019.107688_bib16) 2018; 185 Dizon (10.1016/j.compscitech.2019.107688_bib50) 2018; 20 Li (10.1016/j.compscitech.2019.107688_bib42) 2016; 238 Caminero (10.1016/j.compscitech.2019.107688_bib26) 2018; 148 Fernandez-Vicente (10.1016/j.compscitech.2019.107688_bib56) 2016; 3 Sano (10.1016/j.compscitech.2019.107688_bib37) 2018; 24 Hao (10.1016/j.compscitech.2019.107688_bib39) 2018; 65 Brooks (10.1016/j.compscitech.2019.107688_bib60) 2017; 6 Tymrak (10.1016/j.compscitech.2019.107688_bib1) 2014; 58 Türk (10.1016/j.compscitech.2019.107688_bib30) 2017; 118 Chacón (10.1016/j.compscitech.2019.107688_bib7) 2017; 124 Ning (10.1016/j.compscitech.2019.107688_bib34) 2017; 51 Song (10.1016/j.compscitech.2019.107688_bib11) 2017; 123 Ferreira (10.1016/j.compscitech.2019.107688_bib32) 2017; 124 Hofstatter (10.1016/j.compscitech.2019.107688_bib8) 2017; 36 Wang (10.1016/j.compscitech.2019.107688_bib10) 2017; 110 MarkForged (10.1016/j.compscitech.2019.107688_bib52) Kotlinski (10.1016/j.compscitech.2019.107688_bib12) 2014; 20 Casavola (10.1016/j.compscitech.2019.107688_bib5) 2016; 90 Caminero (10.1016/j.compscitech.2019.107688_bib51) 2016; 136 Blok (10.1016/j.compscitech.2019.107688_bib44) 2018; 22 Caminero (10.1016/j.compscitech.2019.107688_bib25) 2018; 68 Nakagawa (10.1016/j.compscitech.2019.107688_bib15) 2017; 91 Ning (10.1016/j.compscitech.2019.107688_bib33) 2015; 80 Liu (10.1016/j.compscitech.2019.107688_bib41) 2018; 114 Gao (10.1016/j.compscitech.2019.107688_bib19) 2015; 69 Mujika (10.1016/j.compscitech.2019.107688_bib57) 2017; 26 Dong (10.1016/j.compscitech.2019.107688_bib43) 2018; 26 Sugavaneswaran (10.1016/j.compscitech.2019.107688_bib2) 2015; 66 Parandoush (10.1016/j.compscitech.2019.107688_bib9) 2017; 182 Lanzotti (10.1016/j.compscitech.2019.107688_bib53) 2015; 21 Goh (10.1016/j.compscitech.2019.107688_bib47) 2018; 137 Akhoundi (10.1016/j.compscitech.2019.107688_bib36) 2018 Agarwal (10.1016/j.compscitech.2019.107688_bib45) 2018; 52 |
| References_xml | – volume: 153 start-page: 866 year: 2016 end-page: 875 ident: bib3 article-title: Evaluation and prediction of the tensile properties of continuous fiber-reinforced 3D printed structures publication-title: Compos. Struct. – volume: 148 start-page: 93 year: 2018 end-page: 103 ident: bib26 article-title: Impact damage resistance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling publication-title: Composites Part B – year: 2018 ident: bib36 article-title: Improving mechanical properties of continuous fiber-reinforced thermoplastic composites produced by FDM 3D printer publication-title: J. Reinf. Plast. Compos. – volume: 60 start-page: 94 year: 2017 end-page: 101 ident: bib18 article-title: Fracture resistance measurement of fused deposition modeling 3D printed polymers publication-title: Polym. Test. – volume: 51 start-page: 451 year: 2017 end-page: 462 ident: bib34 article-title: Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: effects of process parameters on tensile properties publication-title: J. Compos. Mater. – volume: 137 start-page: 79 year: 2018 end-page: 89 ident: bib47 article-title: Characterization of mechanical properties and fracture mode of additively manufactured carbon fiber and glass fiber reinforced thermoplastics publication-title: Mater. Des. – volume: 26 start-page: 843 year: 2017 end-page: 848 ident: bib21 article-title: Fused deposition technique for continuous fiber reinforced thermoplastic publication-title: J. Mater. Eng. Perform. – start-page: 252 year: 2016 end-page: 261 ident: bib58 article-title: Detection and evaluation of damage in aircraft composites using electromagnetically coupled inductors publication-title: Compos. Struct. – volume: 142 start-page: 241 year: 2018 end-page: 250 ident: bib13 article-title: Recent advances in carbon fiber-reinforced thermoplastic composites: a review publication-title: Composites: Part B – volume: 21 start-page: 604 year: 2015 end-page: 617 ident: bib53 article-title: The impact of process parameters on mechanical properties of parts fabricated in PLA with an open-source 3-D printer publication-title: Rapid Prototyp. J. – volume: 26 start-page: 869 year: 2017 end-page: 877 ident: bib57 article-title: On the effect of shear and local deformation in three-point bending test publication-title: Polym. Test. – volume: 184 start-page: 1005 year: 2018 end-page: 1010 ident: bib38 article-title: 3D printed continuous fibre reinforced composite corrugated structure publication-title: Compos. Struct. – volume: 13 start-page: 71 year: 2017 end-page: 80 ident: bib49 article-title: Influence of processing and orientation print effects on the mechanical and thermal behaviour of 3D-printed ULTEM 9085 material publication-title: Addit. Manuf. – volume: 10 start-page: 1 year: 2010 end-page: 11 ident: bib55 article-title: ASTM standard test method for flexural properties of unreinforced and reinforced plastics and electrical insulating materials publication-title: Annu. Book ASTM Stand. – volume: 83 start-page: 670 year: 2015 end-page: 677 ident: bib4 article-title: Mechanical property characterization and simulation of fused deposition modeling polycarbonate parts publication-title: Mater. Des. – volume: 36 start-page: 1061 year: 2017 end-page: 1073 ident: bib8 article-title: State-of-the-art of fiber-reinforced polymers in additive manufacturing technologies publication-title: J. Reinf. Plast. Compos. – volume: 23 start-page: 209 year: 2017 end-page: 215 ident: bib23 article-title: 3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance publication-title: Rapid Prototyp. J. – volume: 124 start-page: 143 year: 2017 end-page: 157 ident: bib7 article-title: Additive manufacturing of PLA structures using fused deposition modelling: effect of process parameters on mechanical properties and their optimal selection publication-title: Mater. Des. – year: 2018 ident: bib52 article-title: MarkForged MarkTwo – volume: 3 start-page: 81 year: 2017 end-page: 91 ident: bib35 article-title: Characterizing short-fiber-reinforced composites produced using additive manufacturing publication-title: Adv. Manuf. Polym. Compos. Sci. – volume: 80 start-page: 369 year: 2015 end-page: 378 ident: bib33 article-title: Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling publication-title: Compos. B Eng. – volume: 118 start-page: 256 year: 2017 end-page: 265 ident: bib30 article-title: Mechanical characterization of 3D printed polymers for fiber reinforced polymers processing publication-title: Mater. Des. – volume: 110 start-page: 442 year: 2017 end-page: 458 ident: bib10 article-title: 3D printing of polymer matrix: a review and prospective publication-title: Composites: Part B – volume: 185 start-page: 537 year: 2018 end-page: 548 ident: bib16 article-title: Characterization of 3D printed long fibre reinforced composites publication-title: Compos. Struct. – volume: 124 start-page: 88 year: 2017 end-page: 100 ident: bib32 article-title: Experimental characterization and micrography of 3D printed PLA and PLA reinforced with short carbon fibers publication-title: Compos. B Eng. – volume: 182 start-page: 36 year: 2017 end-page: 53 ident: bib9 article-title: A review on additive manufacturing of polymer-fiber composites publication-title: Compos. Struct. – volume: 6 start-page: 97 year: 2017 ident: bib60 article-title: Tensile and fatigue failure of 3D printed parts with continuous fibre reinforcement publication-title: Int. J. Rapid Manuf. – volume: 238 start-page: 218 year: 2016 end-page: 225 ident: bib42 article-title: Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing publication-title: J. Mater. Process. Technol. – volume: 139 start-page: 283 year: 2018 end-page: 292 ident: bib29 article-title: Properties of oriented carbon fiber/polyamide 12 composite parts fabricated by fused deposition modeling publication-title: Mater. Des. – volume: 24 start-page: 521 year: 2018 end-page: 527 ident: bib37 article-title: 3D printing of discontinuous and continuous fibre composites using stereolithography publication-title: Addit. Manuf. – volume: 16 start-page: 146 year: 2017 end-page: 152 ident: bib14 article-title: Fabrication of continuous carbon, glass and kevlar fibre reinforced polymer composites using additive manufacturing publication-title: Addit. Manuf. – volume: 26 start-page: 774 year: 2018 end-page: 781 ident: bib43 article-title: Mechanical properties of continuous kevlar fiber reinforced composites fabricated by fused deposition modeling process publication-title: Procedia Manuf. – volume: 52 start-page: 3173 year: 2018 end-page: 3181 ident: bib45 article-title: Mechanical properties of fiber reinforced polymer composites: a comparative study of conventional and additive manufacturing methods publication-title: J. Compos. Mater. – volume: 193 start-page: 8 year: 2018 end-page: 18 ident: bib48 article-title: Elastic properties of 3D printed fibre-reinforced structures publication-title: Compos. Struct. – volume: 88 start-page: 198 year: 2016 end-page: 205 ident: bib22 article-title: Interface and performance of 3D printed continuous carbon fiber reinforce of PLA composites publication-title: Composites: Part A – volume: 123 start-page: 154 year: 2017 end-page: 164 ident: bib11 article-title: Measurements of the mechanical response of unidirectional 3D-printed PLA publication-title: Mater. Des. – volume: 20 start-page: 44 year: 2018 end-page: 67 ident: bib50 article-title: Mechanical characterization of 3D-printed polymers publication-title: Addit. Manuf. – volume: 105 start-page: 144 year: 2014 end-page: 150 ident: bib31 article-title: Highly oriented carbon fiber–polymer composites via additive manufacturing publication-title: Compos. Sci. Technol. – volume: 136 start-page: 345 year: 2016 end-page: 357 ident: bib51 article-title: Effect of stacking sequence on Charpy impact and flexural damage behaviour of composite laminates publication-title: Compos. Struct. – volume: 69 start-page: 65 year: 2015 end-page: 89 ident: bib19 article-title: The status, challenges, and future of additive manufacturing in engineering publication-title: Comput. Aided Des. – volume: 6 start-page: 23058 year: 2016 ident: bib20 article-title: Three dimensional printing of continuous fibre composites by in-nozzle impregnation publication-title: Sci. Rep. – volume: 91 start-page: 2811 year: 2017 end-page: 2817 ident: bib15 article-title: 3D printing of carbon fibre-reinforced plastic parts publication-title: Int. J. Adv. Manuf. Technol. – volume: 193 start-page: 8 year: 2018 end-page: 18 ident: bib17 article-title: Elastic properties of 3D printed fibre reinforced structures publication-title: Compos. Struct. – volume: 6 start-page: 18 year: 2016 end-page: 27 ident: bib24 article-title: 3D printing of continuous carbon fibre reinforced thermo-plastic CFRTP tensile test specimens publication-title: Open J. Compos. Mater. – volume: 68 start-page: 415 year: 2018 end-page: 423 ident: bib25 article-title: Interlaminar bonding performance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling publication-title: Polym. Test. – volume: 58 start-page: 242 year: 2014 end-page: 246 ident: bib1 article-title: Mechanical properties of components fabricated with open-source 3D printers under realistic environmental conditions publication-title: Mater. Des. – volume: 113 start-page: 114 year: 2018 end-page: 121 ident: bib40 article-title: 3D printing of composite sandwich structures using continuous carbon fiber and fiber tension publication-title: Compos. Part A Appl. Sci. Manuf. – volume: 15 start-page: 1 year: 2012 end-page: 10 ident: bib54 article-title: ASTM standard test method for tensile properties of polymer matrix composite materials publication-title: Annu. Book ASTM Stand. – volume: 3 start-page: 183 year: 2016 end-page: 192 ident: bib56 article-title: Effect of infill parameters on tensile mechanical behaviour in desktop 3D printing publication-title: 3D Print. Addit. Manuf. – volume: 22 start-page: 508 year: 2018 end-page: 515 ident: bib27 article-title: Interlayer fracture toughness of additively manufactured unreinforced and carbon-fiber-reinforced acrylonitrile butadiene styrene publication-title: Addit. Manuf. – volume: 22 start-page: 176 year: 2018 end-page: 186 ident: bib44 article-title: An investigation into 3D printing of fibre reinforced thermoplastic composites publication-title: Addit. Manuf. – volume: 66 start-page: 29 year: 2015 end-page: 36 ident: bib2 article-title: Analytical and experimental investigation on elastic modulus or reinforced additive manufactured structure publication-title: Mater. Des. – volume: 20 start-page: 499 year: 2014 end-page: 510 ident: bib12 article-title: Mechanical properties of commercial rapid prototyping materials publication-title: Rapid Prototyp. J. – volume: 22 start-page: 157 year: 2018 end-page: 164 ident: bib46 article-title: Evaluation of compressive and flexural properties of continuous fiber fabrication additive manufacturing technology publication-title: Addit. Manuf. – volume: 90 start-page: 453 year: 2016 end-page: 458 ident: bib5 article-title: Orthotropic mechanical properties of fused deposition modelling parts described by classical laminate theory publication-title: Mater. Des. – year: 2018 ident: bib59 article-title: Quechua forclaz 30L – volume: 114 start-page: 368 year: 2018 end-page: 376 ident: bib41 article-title: Interfacial performance and fracture patterns of 3D printed continuous carbon fiber with sizing reinforced PA6 composites publication-title: Compos. Part A Appl. Sci. Manuf. – volume: 16 start-page: 467 year: 2016 end-page: 481 ident: bib6 article-title: Failure analysis and mechanical characterization of 3D printed ABS respect to later thickness and orientation publication-title: J. Fail. Anal. Prev. – volume: 137 start-page: 51 year: 2018 end-page: 59 ident: bib28 article-title: Interfacial bonding strength of short carbon fiber/acrylonitrile-butadiene-styrene composites fabricated by fused deposition modeling publication-title: Compos. B Eng. – volume: 65 start-page: 29 year: 2018 end-page: 34 ident: bib39 article-title: Preparation and characterization of 3D printed continuous carbon fiber reinforced thermosetting composites publication-title: Polym. Test. – volume: 60 start-page: 94 year: 2017 ident: 10.1016/j.compscitech.2019.107688_bib18 article-title: Fracture resistance measurement of fused deposition modeling 3D printed polymers publication-title: Polym. Test. doi: 10.1016/j.polymertesting.2017.03.016 – volume: 139 start-page: 283 year: 2018 ident: 10.1016/j.compscitech.2019.107688_bib29 article-title: Properties of oriented carbon fiber/polyamide 12 composite parts fabricated by fused deposition modeling publication-title: Mater. Des. doi: 10.1016/j.matdes.2017.11.027 – volume: 36 start-page: 1061 year: 2017 ident: 10.1016/j.compscitech.2019.107688_bib8 article-title: State-of-the-art of fiber-reinforced polymers in additive manufacturing technologies publication-title: J. Reinf. Plast. Compos. doi: 10.1177/0731684417695648 – volume: 80 start-page: 369 year: 2015 ident: 10.1016/j.compscitech.2019.107688_bib33 article-title: Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling publication-title: Compos. B Eng. doi: 10.1016/j.compositesb.2015.06.013 – volume: 90 start-page: 453 year: 2016 ident: 10.1016/j.compscitech.2019.107688_bib5 article-title: Orthotropic mechanical properties of fused deposition modelling parts described by classical laminate theory publication-title: Mater. Des. doi: 10.1016/j.matdes.2015.11.009 – volume: 153 start-page: 866 year: 2016 ident: 10.1016/j.compscitech.2019.107688_bib3 article-title: Evaluation and prediction of the tensile properties of continuous fiber-reinforced 3D printed structures publication-title: Compos. Struct. doi: 10.1016/j.compstruct.2016.07.018 – volume: 15 start-page: 1 year: 2012 ident: 10.1016/j.compscitech.2019.107688_bib54 article-title: ASTM standard test method for tensile properties of polymer matrix composite materials publication-title: Annu. Book ASTM Stand. – volume: 23 start-page: 209 year: 2017 ident: 10.1016/j.compscitech.2019.107688_bib23 article-title: 3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance publication-title: Rapid Prototyp. J. doi: 10.1108/RPJ-08-2015-0098 – volume: 52 start-page: 3173 year: 2018 ident: 10.1016/j.compscitech.2019.107688_bib45 article-title: Mechanical properties of fiber reinforced polymer composites: a comparative study of conventional and additive manufacturing methods publication-title: J. Compos. Mater. doi: 10.1177/0021998318762297 – volume: 13 start-page: 71 year: 2017 ident: 10.1016/j.compscitech.2019.107688_bib49 article-title: Influence of processing and orientation print effects on the mechanical and thermal behaviour of 3D-printed ULTEM 9085 material publication-title: Addit. Manuf. doi: 10.1016/j.addma.2016.11.007 – volume: 3 start-page: 183 year: 2016 ident: 10.1016/j.compscitech.2019.107688_bib56 article-title: Effect of infill parameters on tensile mechanical behaviour in desktop 3D printing publication-title: 3D Print. Addit. Manuf. doi: 10.1089/3dp.2015.0036 – year: 2018 ident: 10.1016/j.compscitech.2019.107688_bib36 article-title: Improving mechanical properties of continuous fiber-reinforced thermoplastic composites produced by FDM 3D printer publication-title: J. Reinf. Plast. Compos. – volume: 124 start-page: 143 year: 2017 ident: 10.1016/j.compscitech.2019.107688_bib7 article-title: Additive manufacturing of PLA structures using fused deposition modelling: effect of process parameters on mechanical properties and their optimal selection publication-title: Mater. Des. doi: 10.1016/j.matdes.2017.03.065 – volume: 142 start-page: 241 year: 2018 ident: 10.1016/j.compscitech.2019.107688_bib13 article-title: Recent advances in carbon fiber-reinforced thermoplastic composites: a review publication-title: Composites: Part B doi: 10.1016/j.compositesb.2017.12.007 – volume: 185 start-page: 537 year: 2018 ident: 10.1016/j.compscitech.2019.107688_bib16 article-title: Characterization of 3D printed long fibre reinforced composites publication-title: Compos. Struct. doi: 10.1016/j.compstruct.2017.11.052 – volume: 88 start-page: 198 year: 2016 ident: 10.1016/j.compscitech.2019.107688_bib22 article-title: Interface and performance of 3D printed continuous carbon fiber reinforce of PLA composites publication-title: Composites: Part A doi: 10.1016/j.compositesa.2016.05.032 – volume: 238 start-page: 218 year: 2016 ident: 10.1016/j.compscitech.2019.107688_bib42 article-title: Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing publication-title: J. Mater. Process. Technol. doi: 10.1016/j.jmatprotec.2016.07.025 – volume: 21 start-page: 604 year: 2015 ident: 10.1016/j.compscitech.2019.107688_bib53 article-title: The impact of process parameters on mechanical properties of parts fabricated in PLA with an open-source 3-D printer publication-title: Rapid Prototyp. J. doi: 10.1108/RPJ-09-2014-0135 – volume: 110 start-page: 442 year: 2017 ident: 10.1016/j.compscitech.2019.107688_bib10 article-title: 3D printing of polymer matrix: a review and prospective publication-title: Composites: Part B doi: 10.1016/j.compositesb.2016.11.034 – volume: 124 start-page: 88 year: 2017 ident: 10.1016/j.compscitech.2019.107688_bib32 article-title: Experimental characterization and micrography of 3D printed PLA and PLA reinforced with short carbon fibers publication-title: Compos. B Eng. doi: 10.1016/j.compositesb.2017.05.013 – start-page: 252 year: 2016 ident: 10.1016/j.compscitech.2019.107688_bib58 article-title: Detection and evaluation of damage in aircraft composites using electromagnetically coupled inductors publication-title: Compos. Struct. doi: 10.1016/j.compstruct.2015.12.054 – volume: 22 start-page: 508 year: 2018 ident: 10.1016/j.compscitech.2019.107688_bib27 article-title: Interlayer fracture toughness of additively manufactured unreinforced and carbon-fiber-reinforced acrylonitrile butadiene styrene publication-title: Addit. Manuf. doi: 10.1016/j.addma.2018.02.023 – volume: 20 start-page: 44 year: 2018 ident: 10.1016/j.compscitech.2019.107688_bib50 article-title: Mechanical characterization of 3D-printed polymers publication-title: Addit. Manuf. doi: 10.1016/j.addma.2017.12.002 – volume: 6 start-page: 23058 year: 2016 ident: 10.1016/j.compscitech.2019.107688_bib20 article-title: Three dimensional printing of continuous fibre composites by in-nozzle impregnation publication-title: Sci. Rep. doi: 10.1038/srep23058 – volume: 16 start-page: 467 year: 2016 ident: 10.1016/j.compscitech.2019.107688_bib6 article-title: Failure analysis and mechanical characterization of 3D printed ABS respect to later thickness and orientation publication-title: J. Fail. Anal. Prev. doi: 10.1007/s11668-016-0113-2 – volume: 24 start-page: 521 year: 2018 ident: 10.1016/j.compscitech.2019.107688_bib37 article-title: 3D printing of discontinuous and continuous fibre composites using stereolithography publication-title: Addit. Manuf. doi: 10.1016/j.addma.2018.10.033 – volume: 26 start-page: 843 year: 2017 ident: 10.1016/j.compscitech.2019.107688_bib21 article-title: Fused deposition technique for continuous fiber reinforced thermoplastic publication-title: J. Mater. Eng. Perform. doi: 10.1007/s11665-016-2459-8 – volume: 83 start-page: 670 year: 2015 ident: 10.1016/j.compscitech.2019.107688_bib4 article-title: Mechanical property characterization and simulation of fused deposition modeling polycarbonate parts publication-title: Mater. Des. doi: 10.1016/j.matdes.2015.06.074 – volume: 51 start-page: 451 year: 2017 ident: 10.1016/j.compscitech.2019.107688_bib34 article-title: Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: effects of process parameters on tensile properties publication-title: J. Compos. Mater. doi: 10.1177/0021998316646169 – volume: 193 start-page: 8 year: 2018 ident: 10.1016/j.compscitech.2019.107688_bib17 article-title: Elastic properties of 3D printed fibre reinforced structures publication-title: Compos. Struct. doi: 10.1016/j.compstruct.2018.03.051 – volume: 58 start-page: 242 year: 2014 ident: 10.1016/j.compscitech.2019.107688_bib1 article-title: Mechanical properties of components fabricated with open-source 3D printers under realistic environmental conditions publication-title: Mater. Des. doi: 10.1016/j.matdes.2014.02.038 – volume: 22 start-page: 157 year: 2018 ident: 10.1016/j.compscitech.2019.107688_bib46 article-title: Evaluation of compressive and flexural properties of continuous fiber fabrication additive manufacturing technology publication-title: Addit. Manuf. doi: 10.1016/j.addma.2018.05.007 – volume: 69 start-page: 65 year: 2015 ident: 10.1016/j.compscitech.2019.107688_bib19 article-title: The status, challenges, and future of additive manufacturing in engineering publication-title: Comput. Aided Des. doi: 10.1016/j.cad.2015.04.001 – volume: 114 start-page: 368 year: 2018 ident: 10.1016/j.compscitech.2019.107688_bib41 article-title: Interfacial performance and fracture patterns of 3D printed continuous carbon fiber with sizing reinforced PA6 composites publication-title: Compos. Part A Appl. Sci. Manuf. doi: 10.1016/j.compositesa.2018.09.001 – volume: 66 start-page: 29 year: 2015 ident: 10.1016/j.compscitech.2019.107688_bib2 article-title: Analytical and experimental investigation on elastic modulus or reinforced additive manufactured structure publication-title: Mater. Des. doi: 10.1016/j.matdes.2014.10.029 – volume: 137 start-page: 79 year: 2018 ident: 10.1016/j.compscitech.2019.107688_bib47 article-title: Characterization of mechanical properties and fracture mode of additively manufactured carbon fiber and glass fiber reinforced thermoplastics publication-title: Mater. Des. doi: 10.1016/j.matdes.2017.10.021 – ident: 10.1016/j.compscitech.2019.107688_bib59 – volume: 20 start-page: 499 year: 2014 ident: 10.1016/j.compscitech.2019.107688_bib12 article-title: Mechanical properties of commercial rapid prototyping materials publication-title: Rapid Prototyp. J. doi: 10.1108/RPJ-06-2012-0052 – volume: 65 start-page: 29 year: 2018 ident: 10.1016/j.compscitech.2019.107688_bib39 article-title: Preparation and characterization of 3D printed continuous carbon fiber reinforced thermosetting composites publication-title: Polym. Test. doi: 10.1016/j.polymertesting.2017.11.004 – volume: 26 start-page: 774 year: 2018 ident: 10.1016/j.compscitech.2019.107688_bib43 article-title: Mechanical properties of continuous kevlar fiber reinforced composites fabricated by fused deposition modeling process publication-title: Procedia Manuf. doi: 10.1016/j.promfg.2018.07.090 – ident: 10.1016/j.compscitech.2019.107688_bib52 – volume: 123 start-page: 154 year: 2017 ident: 10.1016/j.compscitech.2019.107688_bib11 article-title: Measurements of the mechanical response of unidirectional 3D-printed PLA publication-title: Mater. Des. doi: 10.1016/j.matdes.2017.03.051 – volume: 113 start-page: 114 year: 2018 ident: 10.1016/j.compscitech.2019.107688_bib40 article-title: 3D printing of composite sandwich structures using continuous carbon fiber and fiber tension publication-title: Compos. Part A Appl. Sci. Manuf. doi: 10.1016/j.compositesa.2018.07.029 – volume: 6 start-page: 97 year: 2017 ident: 10.1016/j.compscitech.2019.107688_bib60 article-title: Tensile and fatigue failure of 3D printed parts with continuous fibre reinforcement publication-title: Int. J. Rapid Manuf. doi: 10.1504/IJRAPIDM.2017.082152 – volume: 6 start-page: 18 year: 2016 ident: 10.1016/j.compscitech.2019.107688_bib24 article-title: 3D printing of continuous carbon fibre reinforced thermo-plastic CFRTP tensile test specimens publication-title: Open J. Compos. Mater. doi: 10.4236/ojcm.2016.61003 – volume: 91 start-page: 2811 year: 2017 ident: 10.1016/j.compscitech.2019.107688_bib15 article-title: 3D printing of carbon fibre-reinforced plastic parts publication-title: Int. J. Adv. Manuf. Technol. doi: 10.1007/s00170-016-9891-7 – volume: 137 start-page: 51 year: 2018 ident: 10.1016/j.compscitech.2019.107688_bib28 article-title: Interfacial bonding strength of short carbon fiber/acrylonitrile-butadiene-styrene composites fabricated by fused deposition modeling publication-title: Compos. B Eng. doi: 10.1016/j.compositesb.2017.11.018 – volume: 3 start-page: 81 year: 2017 ident: 10.1016/j.compscitech.2019.107688_bib35 article-title: Characterizing short-fiber-reinforced composites produced using additive manufacturing publication-title: Adv. Manuf. Polym. Compos. Sci. – volume: 22 start-page: 176 year: 2018 ident: 10.1016/j.compscitech.2019.107688_bib44 article-title: An investigation into 3D printing of fibre reinforced thermoplastic composites publication-title: Addit. Manuf. doi: 10.1016/j.addma.2018.04.039 – volume: 10 start-page: 1 year: 2010 ident: 10.1016/j.compscitech.2019.107688_bib55 article-title: ASTM standard test method for flexural properties of unreinforced and reinforced plastics and electrical insulating materials publication-title: Annu. Book ASTM Stand. – volume: 182 start-page: 36 year: 2017 ident: 10.1016/j.compscitech.2019.107688_bib9 article-title: A review on additive manufacturing of polymer-fiber composites publication-title: Compos. Struct. doi: 10.1016/j.compstruct.2017.08.088 – volume: 68 start-page: 415 year: 2018 ident: 10.1016/j.compscitech.2019.107688_bib25 article-title: Interlaminar bonding performance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling publication-title: Polym. Test. doi: 10.1016/j.polymertesting.2018.04.038 – volume: 148 start-page: 93 year: 2018 ident: 10.1016/j.compscitech.2019.107688_bib26 article-title: Impact damage resistance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling publication-title: Composites Part B doi: 10.1016/j.compositesb.2018.04.054 – volume: 184 start-page: 1005 year: 2018 ident: 10.1016/j.compscitech.2019.107688_bib38 article-title: 3D printed continuous fibre reinforced composite corrugated structure publication-title: Compos. Struct. doi: 10.1016/j.compstruct.2017.10.080 – volume: 16 start-page: 146 year: 2017 ident: 10.1016/j.compscitech.2019.107688_bib14 article-title: Fabrication of continuous carbon, glass and kevlar fibre reinforced polymer composites using additive manufacturing publication-title: Addit. Manuf. doi: 10.1016/j.addma.2017.06.004 – volume: 118 start-page: 256 year: 2017 ident: 10.1016/j.compscitech.2019.107688_bib30 article-title: Mechanical characterization of 3D printed polymers for fiber reinforced polymers processing publication-title: Mater. Des. doi: 10.1016/j.matdes.2017.01.050 – volume: 105 start-page: 144 year: 2014 ident: 10.1016/j.compscitech.2019.107688_bib31 article-title: Highly oriented carbon fiber–polymer composites via additive manufacturing publication-title: Compos. Sci. Technol. doi: 10.1016/j.compscitech.2014.10.009 – volume: 26 start-page: 869 year: 2017 ident: 10.1016/j.compscitech.2019.107688_bib57 article-title: On the effect of shear and local deformation in three-point bending test publication-title: Polym. Test. doi: 10.1016/j.polymertesting.2007.06.002 – volume: 193 start-page: 8 year: 2018 ident: 10.1016/j.compscitech.2019.107688_bib48 article-title: Elastic properties of 3D printed fibre-reinforced structures publication-title: Compos. Struct. doi: 10.1016/j.compstruct.2018.03.051 – volume: 136 start-page: 345 year: 2016 ident: 10.1016/j.compscitech.2019.107688_bib51 article-title: Effect of stacking sequence on Charpy impact and flexural damage behaviour of composite laminates publication-title: Compos. Struct. doi: 10.1016/j.compstruct.2015.10.019 |
| SSID | ssj0007592 |
| Score | 2.6969645 |
| Snippet | Continuous Fibre Reinforced Thermoplastic Composites (CFRTPCs) are becoming alternative materials to replace the conventional thermosetting polymers and metals... |
| SourceID | proquest crossref elsevier |
| SourceType | Aggregation Database Enrichment Source Index Database Publisher |
| StartPage | 107688 |
| SubjectTerms | 3D printing Additive manufacturing Aramid fibers Bonding strength Carbon fiber reinforced plastics Carbon fibers Composite materials Continuous fiber composites Continuous fibre reinforced thermoplastic composites Failure analysis Failure modes Fiber composites Fiber reinforced polymers Fiber volume fraction Fused deposition modeling Fused deposition modelling Glass fiber reinforced plastics Kevlar (trademark) Mathematical models Mechanical analysis Mechanical characterization Mechanical properties Modelling Orientation effects Polymer matrix composites Process parameters Stiffness Tensile strength Thickness Three dimensional printing |
| Title | Additive manufacturing of continuous fibre reinforced thermoplastic composites using fused deposition modelling: Effect of process parameters on mechanical properties |
| URI | https://dx.doi.org/10.1016/j.compscitech.2019.107688 https://www.proquest.com/docview/2276830394 |
| Volume | 181 |
| WOSCitedRecordID | wos000479021000017&url=https%3A%2F%2Fcvtisr.summon.serialssolutions.com%2F%23%21%2Fsearch%3Fho%3Df%26include.ft.matches%3Dt%26l%3Dnull%26q%3D |
| hasFullText | 1 |
| inHoldings | 1 |
| isFullTextHit | |
| isPrint | |
| journalDatabaseRights | – providerCode: PRVESC databaseName: Elsevier SD Freedom Collection Journals 2021 customDbUrl: eissn: 1879-1050 dateEnd: 99991231 omitProxy: false ssIdentifier: ssj0007592 issn: 0266-3538 databaseCode: AIEXJ dateStart: 19950101 isFulltext: true titleUrlDefault: https://www.sciencedirect.com providerName: Elsevier |
| link | http://cvtisr.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwtV1bb9MwFLbKhrg8IBhDDAYyEuJlCqoTp3EQL2V0XFSVPXRT3yIndgRTm4ZepokfxA_kF3COHdfdxtB44CWqEqeO_H2xj0--cw4hLxUv8lwrFoSdMgp42YkDIeIYANFMtQuRCFM_5bifDAZiNEoPW61fLhbmdJxUlTg7S-v_CjWcA7AxdPYf4F79KZyA3wA6HAF2OF4L-K5SVg80kdUS4xZsIKKRj2NZiCWKXkvYJWPBFJM3FSUAaAdOpjXY0pjBFYXmqObS872lcSaUyzk0UtppvGwFnXETLd2kQEbxtI072MOM4hNU2pivERON8cWGDjU6_2cLJ110ORJ8fy7OyCg7L_n997_KAr_tv4uqS99QMIzROH79MjIwbbvmyC76yj8A8EYn8F4Gh2P5Q_rAjMYNwqzOS3jf3Co-53htBgXrI4himz7mtbYzvEhSWHtstlu_BLC1SZz9cWmxXo4TZEYNQ4EjgMrAFK7Alk349dRpCAZfsoOjfj8b9kbDV_X3ACud4Ug2ZV9ukM0wiVOYiTe7n3qjzyv7AU6G1jNoH_4WeeFViVf0fpVVdcG-MEbT8D651-x2aNey9AFp6WqL3HbB8PMtcnctH-ZD8tNxl57jLp2W1HOXGu5Sz116jrvUc5ca7lLDXeq5S1fcfUMtc7GDhrnUM5di0xVzqWfuNjk66A33PwZNIZGg4CxcBHGU57xIyrgQqRScxxFXYBymoeoUUrejMMeqeaVWui0V7JdyxtBwLhWXQoq8jB6RjWpa6ceEagU7bC54wWXE81jLUigmWVLEbVZ2Ir1DhAMiK5os-1jsZZw5OeVJtoZhhhhmFsMdEq5urW2qmevc9NahnTUvqLWFM-DtdW7fdQzJmjlsnoUhXALTNuVP_n75KbnjX8VdsrGYLfUzcrM4XXybz543vP4Nlqf4Xg |
| linkProvider | Elsevier |
| openUrl | ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Additive+manufacturing+of+continuous+fibre+reinforced+thermoplastic+composites+using+fused+deposition+modelling%3A+Effect+of+process+parameters+on+mechanical+properties&rft.jtitle=Composites+science+and+technology&rft.au=Chac%C3%B3n%2C+JM&rft.au=Caminero%2C+MA&rft.au=N%C3%BA%C3%B1ez%2C+PJ&rft.au=Garc%C3%ADa-Plaza%2C+E&rft.date=2019-09-08&rft.pub=Elsevier+BV&rft.issn=0266-3538&rft.eissn=1879-1050&rft.volume=181&rft.spage=1&rft_id=info:doi/10.1016%2Fj.compscitech.2019.107688&rft.externalDBID=NO_FULL_TEXT |
| thumbnail_l | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=0266-3538&client=summon |
| thumbnail_m | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=0266-3538&client=summon |
| thumbnail_s | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=0266-3538&client=summon |