Fatigue improvement and residual stress relaxation of shot-peened alloy steel DIN 34CrNiMo6 under axial loading

•Shot-peening process, compared with machined specimens, increases by 21.8% fatigue limit.•Quasi-static tests show more stress relaxation with compressive loads.•High stress magnitudes produce relaxation along the complete fatigue life.•Surface stresses relaxation model for SP is obtained.•FWHM is a...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	International journal of fatigue Jg. 162; S. 107006
Hauptverfasser:	Leguinagoicoa, Nelson, Albizuri, Joseba, Larrañaga, Aitor
Format:	Journal Article
Sprache:	Englisch
Veröffentlicht:	Kidlington Elsevier Ltd 01.09.2022 Elsevier BV
Schlagworte:	34CrNiMo6 steel Alloy steels Axial loads Axial stress Bending fatigue Compressive properties Cyclic relaxation Fatigue life Fatigue limit Fatigue strength Heat treating High-cycle fatigue Materials fatigue Mechanical properties Metal fatigue Nickel chromium molybdenum steels Plastic deformation Quenching and tempering Relaxation of residual stresses Residual stress Residual stresses S N diagrams Shot peening Static tests Stress distribution Stress relaxation Surface roughness 34CrNiMo6 steel Residual stresses High-cycle fatigue Relaxation of residual stresses Shot-peening Cyclic relaxation
ISSN:	0142-1123, 1879-3452
Online-Zugang:	Volltext
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Abstract	•Shot-peening process, compared with machined specimens, increases by 21.8% fatigue limit.•Quasi-static tests show more stress relaxation with compressive loads.•High stress magnitudes produce relaxation along the complete fatigue life.•Surface stresses relaxation model for SP is obtained.•FWHM is a good indicator for defining the relaxation process. Shot-peening treatment was applied to a quenched and tempered DIN 34CrNiMo6 steel to improve its high-cycle R: −1 axial fatigue strength. Compared with the machined condition, the increase in the fatigue limit was 21.8%. S-N curves for shot-peened and the as machined condition were presented and compared with those obtained in previous research for rotating bending fatigue, including curves for mirror-polished specimens. The applied shot-peening treatment in this work (Isp: 8A and 200% coverage) for quenched and tempered (Q + T) DIN 34CrNiMo6 steel introduced a compressive residual stress field and an increase in surface roughness, as well as minor variations in microstructure, hardness and the FWHM (full width of the diffraction peak at half maximum intensity) parameter. The introduced compressive residual stress field tended to reduce when an external stress is applied. This was due to the onset of plastic strain. In this paper, two types of quasi-static tests were conducted by applying an axial stress with six different magnitudes and in the two directions (compressive or tensile). This was in order to assess their influence on the relaxation of surface residual stresses. Due to the introduced compressive residual stresses, if the applied stress was compressive, the onset of plastic deformations was achieved with a lower stress magnitude. In addition, surface residual stress relaxation under cyclic applied stress was evaluated at four different stress magnitudes. Due to the cyclic-softening behaviour of this Q + T steel, its cyclic mechanical properties must be considered to assess the onset of plastic strains. With the experimental data, a logarithmic model to predict the evolution of surface residual stresses with the number of cycles for different applied stress magnitudes was presented.
AbstractList	•Shot-peening process, compared with machined specimens, increases by 21.8% fatigue limit.•Quasi-static tests show more stress relaxation with compressive loads.•High stress magnitudes produce relaxation along the complete fatigue life.•Surface stresses relaxation model for SP is obtained.•FWHM is a good indicator for defining the relaxation process. Shot-peening treatment was applied to a quenched and tempered DIN 34CrNiMo6 steel to improve its high-cycle R: −1 axial fatigue strength. Compared with the machined condition, the increase in the fatigue limit was 21.8%. S-N curves for shot-peened and the as machined condition were presented and compared with those obtained in previous research for rotating bending fatigue, including curves for mirror-polished specimens. The applied shot-peening treatment in this work (Isp: 8A and 200% coverage) for quenched and tempered (Q + T) DIN 34CrNiMo6 steel introduced a compressive residual stress field and an increase in surface roughness, as well as minor variations in microstructure, hardness and the FWHM (full width of the diffraction peak at half maximum intensity) parameter. The introduced compressive residual stress field tended to reduce when an external stress is applied. This was due to the onset of plastic strain. In this paper, two types of quasi-static tests were conducted by applying an axial stress with six different magnitudes and in the two directions (compressive or tensile). This was in order to assess their influence on the relaxation of surface residual stresses. Due to the introduced compressive residual stresses, if the applied stress was compressive, the onset of plastic deformations was achieved with a lower stress magnitude. In addition, surface residual stress relaxation under cyclic applied stress was evaluated at four different stress magnitudes. Due to the cyclic-softening behaviour of this Q + T steel, its cyclic mechanical properties must be considered to assess the onset of plastic strains. With the experimental data, a logarithmic model to predict the evolution of surface residual stresses with the number of cycles for different applied stress magnitudes was presented. Shot-peening treatment was applied to a quenched and tempered DIN 34CrNiMo6 steel to improve its high-cycle R: −1 axial fatigue strength. Compared with the machined condition, the increase in the fatigue limit was 21.8%. S-N curves for shot-peened and the as machined condition were presented and compared with those obtained in previous research for rotating bending fatigue, including curves for mirror-polished specimens. The applied shot-peening treatment in this work (Isp: 8A and 200% coverage) for quenched and tempered (Q + T) DIN 34CrNiMo6 steel introduced a compressive residual stress field and an increase in surface roughness, as well as minor variations in microstructure, hardness and the FWHM (full width of the diffraction peak at half maximum intensity) parameter. The introduced compressive residual stress field tended to reduce when an external stress is applied. This was due to the onset of plastic strain. In this paper, two types of quasi-static tests were conducted by applying an axial stress with six different magnitudes and in the two directions (compressive or tensile). This was in order to assess their influence on the relaxation of surface residual stresses. Due to the introduced compressive residual stresses, if the applied stress was compressive, the onset of plastic deformations was achieved with a lower stress magnitude. In addition, surface residual stress relaxation under cyclic applied stress was evaluated at four different stress magnitudes. Due to the cyclic-softening behaviour of this Q + T steel, its cyclic mechanical properties must be considered to assess the onset of plastic strains. With the experimental data, a logarithmic model to predict the evolution of surface residual stresses with the number of cycles for different applied stress magnitudes was presented.
ArticleNumber	107006
Author	Albizuri, Joseba Leguinagoicoa, Nelson Larrañaga, Aitor
Author_xml	– sequence: 1 givenname: Nelson surname: Leguinagoicoa fullname: Leguinagoicoa, Nelson organization: Department of Mechanical Engineering, Faculty of Engineering, University of the Basque Country UPV/EHU, Bilbao, Bizkaia, Spain – sequence: 2 givenname: Joseba surname: Albizuri fullname: Albizuri, Joseba email: joseba.albizuri@ehu.eus organization: Department of Mechanical Engineering, Faculty of Engineering, University of the Basque Country UPV/EHU, Bilbao, Bizkaia, Spain – sequence: 3 givenname: Aitor surname: Larrañaga fullname: Larrañaga, Aitor organization: SGiker, University of the Basque Country UPV/EHU, Leioa, Bizkaia, Spain
BookMark	eNqNkM1u3CAUhVE1lTqT9hmKlLWn_BjsWWQxmiRNpPxskjXCcJ1ieWAKeJS8fUkcdZFNu-Jydb6D-FZo4YMHhL5TsqaEyh_D2g29zu5pgjUjjJVtQ4j8hJa0bTYVrwVboCWhNasoZfwLWqU0EEI2pBFLFC5nFLv9IYYj7MFnrL3FEZKzkx5xymVM5T7q55INHocep18hVwcADxbrcQwvJQYw4vPrO8zrXbxzt0HiyVuIWD-7UjMGbZ1_-oo-93pM8O39PEGPlxcPu6vq5v7n9W57Uxm-YblqrRC1bJjUom6prBvdQWvajkuQLfDeGCFFR61kVAto6r7jBDbEGsI7zSXhJ-h07i2_-j1BymoIU_TlScVkWzBRE15SzZwyMaQUoVeH6PY6vihK1KtdNai_dtWrXTXbLeTZB9K4_KYnR-3G_-C3Mw9FwtFBVMk48Aasi2CyssH9s-MPk-meKA
CitedBy_id	crossref_primary_10_1016_j_engfailanal_2023_107740 crossref_primary_10_3390_ma16134755 crossref_primary_10_3390_coatings13071210 crossref_primary_10_3390_met12071085 crossref_primary_10_1007_s11665_023_08715_6 crossref_primary_10_26748_KSOE_2024_103 crossref_primary_10_3390_ma17102375 crossref_primary_10_1007_s10010_024_00739_1 crossref_primary_10_1016_j_ijfatigue_2025_108862 crossref_primary_10_1016_j_ijfatigue_2025_109056 crossref_primary_10_1016_j_ijfatigue_2024_108384 crossref_primary_10_1007_s00170_023_11365_6 crossref_primary_10_1016_j_engfailanal_2023_107933 crossref_primary_10_1111_ffe_14454 crossref_primary_10_3390_ma15196677 crossref_primary_10_1016_j_ijfatigue_2023_107989 crossref_primary_10_1016_j_jmrt_2025_07_227 crossref_primary_10_1088_2051_672X_ad42b9 crossref_primary_10_1016_j_psep_2023_05_015 crossref_primary_10_1016_j_ijfatigue_2024_108558 crossref_primary_10_1177_09544054241309163 crossref_primary_10_1016_j_ijfatigue_2023_108114 crossref_primary_10_1016_j_ijfatigue_2025_109104 crossref_primary_10_1007_s00170_023_11703_8 crossref_primary_10_1016_j_ijfatigue_2025_109200 crossref_primary_10_1016_j_jallcom_2024_176446 crossref_primary_10_3390_ma16010463
Cites_doi	10.1016/j.ijfatigue.2020.105621 10.1016/j.ijfatigue.2008.01.005 10.1016/j.proeng.2014.06.261 10.1016/S0921-5093(98)00522-X 10.1016/j.engfracmech.2011.06.011 10.1016/0142-1123(95)00044-T 10.1016/S0142-1123(98)00002-4 10.1016/j.apsusc.2015.08.110 10.1016/j.tafmec.2012.02.004 10.1016/j.ijfatigue.2004.03.007 10.1111/j.1460-2695.2007.01102.x 10.1016/j.ijfatigue.2012.10.008 10.1016/j.ijfatigue.2018.10.014 10.1016/j.surfcoat.2019.07.057 10.1016/j.engfracmech.2014.11.005 10.1016/j.ijfatigue.2003.12.003 10.1115/1.3258522 10.1016/S0142-1123(01)00132-3 10.1016/j.surfcoat.2011.11.045 10.1016/j.surfcoat.2010.04.015 10.1016/j.jmatprotec.2005.02.095 10.4271/2002-01-1409 10.1016/S0921-5093(00)01035-2 10.1016/j.ijfatigue.2008.11.017 10.1016/j.jallcom.2016.01.119 10.1016/j.ijfatigue.2013.06.024 10.3390/met6050098 10.1016/j.apsusc.2012.03.111 10.1016/j.engfailanal.2020.104379 10.1016/j.ijfatigue.2011.06.004 10.1016/j.msea.2014.06.118 10.1016/j.ijfatigue.2004.01.010 10.1016/S0142-1123(02)00174-3 10.1016/j.apsusc.2013.11.050 10.1111/j.1460-2695.2009.01360.x 10.1016/S0142-1123(01)00015-9 10.1080/10426914.2017.1317351 10.1016/S0142-1123(01)00205-5 10.1016/j.ijfatigue.2013.08.022 10.1016/j.msea.2010.09.050
ContentType	Journal Article
Copyright	2022 The Authors Copyright Elsevier BV Sep 2022
Copyright_xml	– notice: 2022 The Authors – notice: Copyright Elsevier BV Sep 2022
DBID	6I. AAFTH AAYXX CITATION 7SR 8BQ 8FD JG9
DOI	10.1016/j.ijfatigue.2022.107006
DatabaseName	ScienceDirect Open Access Titles Elsevier:ScienceDirect:Open Access CrossRef Engineered Materials Abstracts METADEX Technology Research Database Materials Research Database
DatabaseTitle	CrossRef Materials Research Database Engineered Materials Abstracts Technology Research Database METADEX
DatabaseTitleList	Materials Research Database
DeliveryMethod	fulltext_linktorsrc
Discipline	Engineering
EISSN	1879-3452
ExternalDocumentID	10_1016_j_ijfatigue_2022_107006 S0142112322002729
GroupedDBID	--K --M -~X .~1 0R~ 1B1 1~. 1~5 29J 4.4 457 4G. 5GY 5VS 6I. 6OB 7-5 71M 8P~ 9JN AABCJ AABNK AACTN AAEDT AAEDW AAFTH AAIAV AAIKJ AAKOC AALRI AAOAW AAQFI AAQXK AAXUO ABDEX ABEFU ABFNM ABJNI ABMAC ABXDB ABYKQ ACDAQ ACGFS ACIWK ACNNM ACRLP ADBBV ADEZE ADMUD ADTZH AEBSH AECPX AEKER AENEX AFKWA AFTJW AGHFR AGUBO AGYEJ AHHHB AHJVU AI. AIEXJ AIKHN AITUG AJBFU AJOXV ALMA_UNASSIGNED_HOLDINGS AMFUW AMRAJ ASPBG AVWKF AXJTR AZFZN BJAXD BKOJK BLXMC CS3 DU5 EBS EFJIC EFLBG EJD EO8 EO9 EP2 EP3 F5P FDB FEDTE FGOYB FIRID FNPLU FYGXN G-2 G-Q GBLVA HVGLF HZ~ IHE J1W JJJVA KOM LY7 M41 MO0 N9A O-L O9- OAUVE OZT P-8 P-9 P2P PC. Q38 R2- RIG ROL RPZ SDF SDG SDP SES SET SEW SPC SPCBC SST SSZ T5K T9H TN5 VH1 WUQ XPP ZMT ~G- 9DU AATTM AAXKI AAYWO AAYXX ABWVN ACLOT ACRPL ACVFH ADCNI ADNMO AEIPS AEUPX AFJKZ AFPUW AGQPQ AIGII AIIUN AKBMS AKRWK AKYEP ANKPU APXCP CITATION EFKBS ~HD 7SR 8BQ 8FD JG9
ID	FETCH-LOGICAL-c392t-8d5546726a5481647abe8c8b36e68e3fcc565b1d621a5e74fb30e90dc03ba3603
ISICitedReferencesCount	35
ISICitedReferencesURI	http://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=Summon&SrcAuth=ProQuest&DestLinkType=CitingArticles&DestApp=WOS_CPL&KeyUT=000829870800004&url=https%3A%2F%2Fcvtisr.summon.serialssolutions.com%2F%23%21%2Fsearch%3Fho%3Df%26include.ft.matches%3Dt%26l%3Dnull%26q%3D
ISSN	0142-1123
IngestDate	Sun Oct 05 00:25:04 EDT 2025 Sat Nov 29 07:26:58 EST 2025 Tue Nov 18 21:00:28 EST 2025 Fri Feb 23 02:40:15 EST 2024
IsDoiOpenAccess	true
IsOpenAccess	true
IsPeerReviewed	true
IsScholarly	true
Keywords	34CrNiMo6 steel Residual stresses High-cycle fatigue Relaxation of residual stresses Shot-peening Cyclic relaxation
Language	English
License	This is an open access article under the CC BY license.
LinkModel	OpenURL
MergedId	FETCHMERGED-LOGICAL-c392t-8d5546726a5481647abe8c8b36e68e3fcc565b1d621a5e74fb30e90dc03ba3603
Notes	ObjectType-Article-1 SourceType-Scholarly Journals-1 ObjectType-Feature-2 content type line 14
OpenAccessLink	https://dx.doi.org/10.1016/j.ijfatigue.2022.107006
PQID	2686215403
PQPubID	2045465
ParticipantIDs	proquest_journals_2686215403 crossref_primary_10_1016_j_ijfatigue_2022_107006 crossref_citationtrail_10_1016_j_ijfatigue_2022_107006 elsevier_sciencedirect_doi_10_1016_j_ijfatigue_2022_107006
PublicationCentury	2000
PublicationDate	September 2022 2022-09-00 20220901
PublicationDateYYYYMMDD	2022-09-01
PublicationDate_xml	– month: 09 year: 2022 text: September 2022
PublicationDecade	2020
PublicationPlace	Kidlington
PublicationPlace_xml	– name: Kidlington
PublicationTitle	International journal of fatigue
PublicationYear	2022
Publisher	Elsevier Ltd Elsevier BV
Publisher_xml	– name: Elsevier Ltd – name: Elsevier BV
References	Niku-Lari (b0015) 1981 Vielma, Llaneza, Belzunce (b0060) 2014; 74 Holzapfel, Schulze, Vöhringer, Macherauch (b0350) 1996 Menig, Scliulze, Vöhringer (b0185) 2002 Real, Rodríguez, Belzunce, Sanjurjo, Canteli, Fernández-Pariente (b0365) 2009; 32 Llaneza, Belzunce (b0100) Nov. 2015; 356 Menig R, Schulze V, Löhe D, Vöhringer O. Shot peening plus subsequent short-time annealing-A way to increase the residual stress stability and alternating bending strength of AISI 4140. Xie, Wen, Zhan, Wang, Jiang, Ji (b0135) 2016; 666 Totten, Howes, Inoue (b0025) 2002 Pallarés-Santasmartas, Albizuri, Avilés, Avilés (b0210) 2018; 8 2002. p. 711–8, doi: 10.4271/2002/-01-1409. Schulze, Lang, Vöhringer, Macherauch (b0305) 1996 Marin (b0320) 1962 Holzapfel, Schulze, Vöhringer, Macherauch (b0090) 1998; 248 Branco, Costa, Antunes (b0230) 2012; 58 Norton (b0325) 2006 Bagherifard, Guagliano (b0165) 2012; 81 Vaara, Kunnari, Frondelius (b0115) 2020; 110 Kobayashi, Matsui, Murakami (b0020) 1998; 20 SAE International. Zhang, Lu, Luo (b0175) 2016; 6 Smith, Hirschberg, Manson (b0240) 1963 Basquin (b0295) 1910; 10 Moore, Evans (b0260) 1958; 66 Benedetti, Bortolamedi, Fontanari, Frendo (b0125) Aug. 2004; 26 Avilés (b0330) 2015 Boller, Seeger (b0225) 2013; vol. 42 Davoli, Bernasconi, Filippini, Foletti, Papadopoulos (b0285) 2003; 25 Bagherifard, Ghelichi, Guagliano (b0050) Jul. 2012; 258 UNE-EN ISO. ISO 6892-1:2020 Metallic materials – tensile testing – Part 1: method of test at room temperature (ISO 6892-1:2019). García-Granada, Gomez-Gras, Jerez-Mesa, Travieso-Rodriguez, Reyes (b0270) Aug. 2017; 32 Cammett, Sauer, Arnold (b0120) 1993 Buchanan, John (b0140) Oct. 2014; 615 Harada, Mori (b0155) 2005; 162-163 Wick, Schulze, Vöhringer (b0150) 2000; 293 Prevéy, Cammett (b0065) 2002 Avilés, Avilés, Albizuri, Pallarés-Santasmartas, Rodríguez (b0205) Feb. 2019; 119 Torres, Voorwald (b0045) 2002; 24 Faupel, Fisher (b0335) 1981 Bignonnet (b0095) 1987 Noyan, Cohen (b0055) 2013 Sakamoto, Lee, Cheong (b0310) 2015; 133 Hua, Liu, Wang, Hou (b0315) Oct. 2019; 375 Ramberg W, Osgood WR. Description of stress-strain curves by three parameters (No. NACA-TN-902). Vöhringer (b0080) 1987; 4 Mitrovic, Adamovic, Zivic, Dzunic, Pantic (b0005) Jan. 2014; 290 Prevéy, Cammett (b0180) 2004; 26 Nascimento, Souza, Pigatin, Voorwald (b0035) 2001; 23 Iida, Taniguchi (b0265) 1996 Hanagarth, Vöhringer, Macherauch (b0300) 1990 Kirk (b0355) 1987 Wagner, Luetjering (b0360) 1981 Burgahn, Vöhringer, Macherauch (b0275) 1990 Benedetti, Fontanari, Scardi, Ricardo, Bandini (b0130) 2009; 31 McCLUNG (b0075) 2007; 30 vol. 902; 1943. Tosha, Lu, Delphine, Guelorget, Iida (b0105) 2002 Yang, Zeng, Yang (b0190) 2020; 137 Kodama (b0195) 1972; 2 Avilés, Albizuri, Rodríguez, López De Lacalle (b0200) 2013; 55 Rodríguez, López de Lacalle, Celaya, Lamikiz, Albizuri (b0215) 2012; 206 Zhuang, Halford (b0145) 2001; 23 SAE International; 2003. Javidi, Rieger, Eichlseder (b0030) Oct. 2008; 30 Nazakawa, Kodama (b0280) 1987; 2 Fitzpatrick ME, Fry AT, Holdway P, Kandil FA, Shackleton J, Suominen L. Determination of residual stresses by X-ray diffraction; 2005. Delosrios, Walley, Milan, Hammersley (b0040) 1995; 17 Bagherifard, Fernandez-Pariente, Ghelichi, Guagliano (b0170) 2014; 65 Fathallah, Laamouri, Sidhom, Braham (b0085) Oct. 2004; 26 Azar, Hashemi, Rezaee Yazdi (b0010) 2010; 204 Branco, Costa, Antunes, Perdigão (b0235) 2016; 6 Dalaei, Karlsson, Svensson (b0110) Jan. 2011; 528 ASTM International (b0245) 2015 Juvinall, Saunders (b0340) 1983 Laamouri, Sidhom, Braham (b0070) 2013; 48 Avilés, Albizuri, Lamikiz, Ukar, Avilés (b0345) Nov. 2011; 33 Niku-Lari (10.1016/j.ijfatigue.2022.107006_b0015) 1981 Avilés (10.1016/j.ijfatigue.2022.107006_b0330) 2015 Torres (10.1016/j.ijfatigue.2022.107006_b0045) 2002; 24 Bagherifard (10.1016/j.ijfatigue.2022.107006_b0050) 2012; 258 Norton (10.1016/j.ijfatigue.2022.107006_b0325) 2006 Kodama (10.1016/j.ijfatigue.2022.107006_b0195) 1972; 2 Laamouri (10.1016/j.ijfatigue.2022.107006_b0070) 2013; 48 Benedetti (10.1016/j.ijfatigue.2022.107006_b0125) 2004; 26 Bagherifard (10.1016/j.ijfatigue.2022.107006_b0165) 2012; 81 10.1016/j.ijfatigue.2022.107006_b0160 García-Granada (10.1016/j.ijfatigue.2022.107006_b0270) 2017; 32 Sakamoto (10.1016/j.ijfatigue.2022.107006_b0310) 2015; 133 Prevéy (10.1016/j.ijfatigue.2022.107006_b0065) 2002 Vielma (10.1016/j.ijfatigue.2022.107006_b0060) 2014; 74 Javidi (10.1016/j.ijfatigue.2022.107006_b0030) 2008; 30 Juvinall (10.1016/j.ijfatigue.2022.107006_b0340) 1983 Smith (10.1016/j.ijfatigue.2022.107006_b0240) 1963 Marin (10.1016/j.ijfatigue.2022.107006_b0320) 1962 Bagherifard (10.1016/j.ijfatigue.2022.107006_b0170) 2014; 65 Bignonnet (10.1016/j.ijfatigue.2022.107006_b0095) 1987 Basquin (10.1016/j.ijfatigue.2022.107006_b0295) 1910; 10 Xie (10.1016/j.ijfatigue.2022.107006_b0135) 2016; 666 Iida (10.1016/j.ijfatigue.2022.107006_b0265) 1996 Dalaei (10.1016/j.ijfatigue.2022.107006_b0110) 2011; 528 Fathallah (10.1016/j.ijfatigue.2022.107006_b0085) 2004; 26 Holzapfel (10.1016/j.ijfatigue.2022.107006_b0350) 1996 Moore (10.1016/j.ijfatigue.2022.107006_b0260) 1958; 66 10.1016/j.ijfatigue.2022.107006_b0250 Zhang (10.1016/j.ijfatigue.2022.107006_b0175) 2016; 6 Noyan (10.1016/j.ijfatigue.2022.107006_b0055) 2013 10.1016/j.ijfatigue.2022.107006_b0290 Kirk (10.1016/j.ijfatigue.2022.107006_b0355) 1987 ASTM International (10.1016/j.ijfatigue.2022.107006_b0245) 2015 Davoli (10.1016/j.ijfatigue.2022.107006_b0285) 2003; 25 10.1016/j.ijfatigue.2022.107006_b0255 Real (10.1016/j.ijfatigue.2022.107006_b0365) 2009; 32 Avilés (10.1016/j.ijfatigue.2022.107006_b0345) 2011; 33 Benedetti (10.1016/j.ijfatigue.2022.107006_b0130) 2009; 31 Faupel (10.1016/j.ijfatigue.2022.107006_b0335) 1981 Prevéy (10.1016/j.ijfatigue.2022.107006_b0180) 2004; 26 Branco (10.1016/j.ijfatigue.2022.107006_b0235) 2016; 6 Hanagarth (10.1016/j.ijfatigue.2022.107006_b0300) 1990 Zhuang (10.1016/j.ijfatigue.2022.107006_b0145) 2001; 23 Tosha (10.1016/j.ijfatigue.2022.107006_b0105) 2002 Wagner (10.1016/j.ijfatigue.2022.107006_b0360) 1981 Harada (10.1016/j.ijfatigue.2022.107006_b0155) 2005; 162-163 Llaneza (10.1016/j.ijfatigue.2022.107006_b0100) 2015; 356 Wick (10.1016/j.ijfatigue.2022.107006_b0150) 2000; 293 Hua (10.1016/j.ijfatigue.2022.107006_b0315) 2019; 375 Menig (10.1016/j.ijfatigue.2022.107006_b0185) 2002 Avilés (10.1016/j.ijfatigue.2022.107006_b0205) 2019; 119 Burgahn (10.1016/j.ijfatigue.2022.107006_b0275) 1990 McCLUNG (10.1016/j.ijfatigue.2022.107006_b0075) 2007; 30 Cammett (10.1016/j.ijfatigue.2022.107006_b0120) 1993 Yang (10.1016/j.ijfatigue.2022.107006_b0190) 2020; 137 10.1016/j.ijfatigue.2022.107006_b0220 Schulze (10.1016/j.ijfatigue.2022.107006_b0305) 1996 Vaara (10.1016/j.ijfatigue.2022.107006_b0115) 2020; 110 Boller (10.1016/j.ijfatigue.2022.107006_b0225) 2013; vol. 42 Pallarés-Santasmartas (10.1016/j.ijfatigue.2022.107006_b0210) 2018; 8 Holzapfel (10.1016/j.ijfatigue.2022.107006_b0090) 1998; 248 Vöhringer (10.1016/j.ijfatigue.2022.107006_b0080) 1987; 4 Avilés (10.1016/j.ijfatigue.2022.107006_b0200) 2013; 55 Branco (10.1016/j.ijfatigue.2022.107006_b0230) 2012; 58 Nascimento (10.1016/j.ijfatigue.2022.107006_b0035) 2001; 23 Delosrios (10.1016/j.ijfatigue.2022.107006_b0040) 1995; 17 Kobayashi (10.1016/j.ijfatigue.2022.107006_b0020) 1998; 20 Buchanan (10.1016/j.ijfatigue.2022.107006_b0140) 2014; 615 Azar (10.1016/j.ijfatigue.2022.107006_b0010) 2010; 204 Rodríguez (10.1016/j.ijfatigue.2022.107006_b0215) 2012; 206 Nazakawa (10.1016/j.ijfatigue.2022.107006_b0280) 1987; 2 Totten (10.1016/j.ijfatigue.2022.107006_b0025) 2002 Mitrovic (10.1016/j.ijfatigue.2022.107006_b0005) 2014; 290
References_xml	– volume: 2 start-page: 111 year: 1972 end-page: 118 ident: b0195 article-title: The behavior of residual stress during fatigue stress cycles publication-title: Proceedings of the International Conference on Mechanical Behavior of Metals II – volume: 10 start-page: 625 year: 1910 end-page: 630 ident: b0295 article-title: The exponential law of endurance tests publication-title: Am Soc Test Mater Proc – year: 1990 ident: b0300 article-title: Relaxation of shot peening residual stresses of the steel 42 CrMo 4 by tensile or compressive deformation publication-title: International Conferences on Shot Peening. ISCP-4 – year: 2015 ident: b0330 article-title: Métodos de cálculo de fatiga para ingeniería – volume: 23 start-page: 607 year: 2001 end-page: 618 ident: b0035 article-title: Effects of surface treatments on the fatigue strength of AISI 4340 aeronautical steel publication-title: Int J Fatigue – year: 2015 ident: b0245 article-title: ASTM E466–15 Standard practice for conducting force controlled constant amplitude axial fatigue tests of metallic materials publication-title: ASTM International – volume: 293 start-page: 191 year: 2000 end-page: 197 ident: b0150 article-title: Effects of warm peening on fatigue life and relaxation behaviour of residual stresses in AISI 4140 steel publication-title: Mater Sci Eng – year: 2002 ident: b0185 article-title: Comparison of surface characteristics and thermal residual stress relaxation of laser peened and shot peened AISI 4140 publication-title: International Conferences on Shot Peening. ICSP-8 – volume: 6 year: 2016 ident: b0235 article-title: Monotonic and cyclic behavior of DIN 34CrNiMo6 tempered alloy steel publication-title: Metals (Basel) – year: 1983 ident: b0340 article-title: Fundamentals of machine component design publication-title: J Mech Trans Autom Design – volume: 30 start-page: 2050 year: Oct. 2008 end-page: 2055 ident: b0030 article-title: The effect of machining on the surface integrity and fatigue life publication-title: Int J Fatigue – volume: 25 start-page: 471 year: 2003 end-page: 480 ident: b0285 article-title: Independence of the torsional fatigue limit upon a mean shear stress publication-title: Int J Fatigue – year: 2006 ident: b0325 article-title: Machine design: an integrated approach – volume: 32 start-page: 567 year: 2009 end-page: 572 ident: b0365 article-title: Fatigue behaviour of duplex stainless steel reinforcing bars subjected to shot peening publication-title: Fatigue Fract Eng Mater Struct – volume: 74 start-page: 273 year: 2014 end-page: 278 ident: b0060 article-title: Shot peening intensity optimization to increase the fatigue life of a quenched and tempered structural steel publication-title: Proc Eng – volume: 356 start-page: 475 year: Nov. 2015 end-page: 485 ident: b0100 article-title: Study of the effects produced by shot peening on the surface of quenched and tempered steels: roughness, residual stresses and work hardening publication-title: Appl Surf Sci – volume: 66 start-page: 340 year: 1958 end-page: 345 ident: b0260 article-title: Mathematical correction for stress in removed layers in X-ray diffraction residual stress analysis publication-title: SAE Trans – volume: 248 start-page: 9 year: 1998 end-page: 18 ident: b0090 article-title: Residual stress relaxation in an AISI 4140 steel due to quasistatic and cyclic loading at higher temperatures publication-title: Mater Sci Eng – volume: 65 start-page: 64 year: 2014 end-page: 70 ident: b0170 article-title: Effect of severe shot peening on microstructure and fatigue strength of cast iron publication-title: Int J Fatigue – reference: . SAE International; 2003. – volume: 133 start-page: 99 year: 2015 end-page: 111 ident: b0310 article-title: Effect of surface flaw on fatigue strength of shot-peened medium-carbon steel publication-title: Eng Fract Mech – volume: 137 start-page: 105621 year: 2020 ident: b0190 article-title: Characterization of shot peening properties and modelling on the fatigue performance of 304 austenitic stainless steel publication-title: Int J Fatigue – year: 2002 ident: b0065 article-title: The Effect of Shot Peening Coverage on Residual Stress, Cold Work and Fatigue in a Ni-Cr-Mo Low Alloy Steel publication-title: International Conferences on Shot Peening. ICSP-8 – volume: 23 start-page: 31 year: 2001 end-page: 37 ident: b0145 article-title: Investigation of residual stress relaxation under cyclic load publication-title: Int J Fatigue – year: 2002 ident: b0025 publication-title: ASM Int – reference: Menig R, Schulze V, Löhe D, Vöhringer O. Shot peening plus subsequent short-time annealing-A way to increase the residual stress stability and alternating bending strength of AISI 4140. – year: 1987 ident: b0095 article-title: Fatigue strenght of shot-peened grade 35NCD 16 steel. Variation of residual stresses introduced by shot peening according to type of loading publication-title: International Conferences on Shot Peening. ICSP-3 – year: 1993 ident: b0120 article-title: Observations on shot peening residual stresses in 17 Cr-7 Ni austenitic stainless steel and their redistribution via mechanical loading publication-title: International Conferences on Shot Peening. ISCP-5 – volume: 26 start-page: 975 year: 2004 end-page: 982 ident: b0180 article-title: The influence of surface enhancement by low plasticity burnishing on the corrosion fatigue performance of AA7075-T6 publication-title: Int J Fatigue – volume: vol. 42 year: 2013 ident: b0225 publication-title: Materials data for cyclic loading: Low-alloy steels – volume: 81 start-page: 56 year: 2012 end-page: 68 ident: b0165 article-title: Fatigue behavior of a low-alloy steel with nanostructured surface obtained by severe shot peening publication-title: Eng Fract Mech – volume: 258 start-page: 6831 year: Jul. 2012 end-page: 6840 ident: b0050 article-title: Numerical and experimental analysis of surface roughness generated by shot peening publication-title: Appl Surf Sci – volume: 206 start-page: 2817 year: 2012 end-page: 2824 ident: b0215 article-title: Surface improvement of shafts by the deep ball-burnishing technique publication-title: Surf Coat Technol – volume: 30 start-page: 173 year: 2007 end-page: 205 ident: b0075 article-title: A literature survey on the stability and significance of residual stresses during fatigue publication-title: Fatigue Fract Eng Mater Struct – year: 1962 ident: b0320 article-title: Mechanical behavior of engineering materials – volume: 4 start-page: 367 year: 1987 end-page: 396 ident: b0080 article-title: Relaxation of residual stresses by annealing or mechanical treatment publication-title: Pergamon Press, Advances Surface Treatments Technology–Applications–Effects – year: 1996 ident: b0350 article-title: Relaxation behaviour of shot peening induced residual stresses in AISI 4140 due to quasistatic uniaxial loading at elevated temperatures publication-title: International Conferences on Shot Peening. ICSP-6 – volume: 24 start-page: 877 year: 2002 end-page: 886 ident: b0045 article-title: An evaluation of shot peening, residual stress and stress relaxation on the fatigue life of AISI 4340 steel publication-title: Int J Fatigue – volume: 8 year: 2018 ident: b0210 article-title: Mean Stress Effect on the Axial Fatigue Strength of DIN 34CrNiMo6 Quenched and tempered Steel publication-title: Metals (Basel) – reference: UNE-EN ISO. ISO 6892-1:2020 Metallic materials – tensile testing – Part 1: method of test at room temperature (ISO 6892-1:2019). – year: 1981 ident: b0015 article-title: Shot-peening publication-title: International Conferences on Shot Peening. ISCP-1 – volume: 6 start-page: Dec year: 2016 ident: b0175 article-title: Residual stress distribution and microstructure at a laser spot of AISI 304 stainless steel subjected to different laser shock peening impacts publication-title: Metals (Basel) – year: 1963 ident: b0240 article-title: Fatigue behavior of materials under strain cycling in low and intermediate life range publication-title: National Aeronautics and Space Administration Cleveland Oh Lewis Research Center – volume: 2 start-page: 55 year: 1987 end-page: 69 ident: b0280 article-title: Statistical SN testing method with 14 specimens: JSME standard method for determination of SN curve publication-title: Statist Res Fatigue Fract-Current Japanese Mater Res – year: 1981 ident: b0335 article-title: Engineering design: A synthesis of stress analysis and materials engineering – volume: 290 start-page: 223 year: Jan. 2014 end-page: 232 ident: b0005 article-title: Friction and wear behavior of shot peened surfaces of 36CrNiMo4 and 36NiCrMo16 alloyed steels under dry and lubricated contact conditions publication-title: Appl Surf Sci – volume: 31 start-page: 1225 year: 2009 end-page: 1236 ident: b0130 article-title: Reverse bending fatigue of shot peened 7075–T651 aluminium alloy: The role of residual stress relaxation publication-title: Int J Fatigue – year: 1981 ident: b0360 article-title: Influence of shot peening on the fatigue behavior of titanium alloys publication-title: International Conferences on Shot Peening. ICSP-1 – volume: 48 start-page: 109 year: 2013 end-page: 121 ident: b0070 article-title: Evaluation of residual stress relaxation and its effect on fatigue strength of AISI 316L stainless steel ground surfaces: Experimental and numerical approaches publication-title: Int J Fatigue – volume: 26 start-page: 889 year: Aug. 2004 end-page: 897 ident: b0125 article-title: Bending fatigue behaviour of differently shot peened A1 6082 T5 alloy publication-title: Int J Fatigue – year: 2002 ident: b0105 article-title: Influence of pre-annealing on surface and surface layer characteristics produced by shot peening publication-title: International Conferences on Shot Peening. ICSP-8 – year: 1990 ident: b0275 article-title: Microstructural investigations of the shot-peened steel 42 CrMo 4 in different heat treatment conditions by the aid of a X-ray profile analysis publication-title: International Conferences on Shot Peening. ICSP-4 – year: 1996 ident: b0265 article-title: Relaxation of residual stress distribution produced by shot peening under fatigue test publication-title: International Conferences on Shot Peening. ICSP-6 – volume: 33 start-page: 1477 year: Nov. 2011 end-page: 1489 ident: b0345 article-title: Influence of laser polishing on the high cycle fatigue strength of medium carbon AISI 1045 steel publication-title: Int J Fatigue – volume: 528 start-page: 1008 year: Jan. 2011 end-page: 1015 ident: b0110 article-title: Stability of shot peening induced residual stresses and their influence on fatigue lifetime publication-title: Mater Sci Eng, A – volume: 17 start-page: 493 year: 1995 end-page: 499 ident: b0040 article-title: Fatigue crack initiation and propagation on shot-peened surfaces in A316 stainless steel publication-title: Int J Fatigue – reference: , vol. 902; 1943. – volume: 58 start-page: 28 year: 2012 end-page: 34 ident: b0230 article-title: Low-cycle fatigue behaviour of 34CrNiMo6 high strength steel publication-title: Theor Appl Fract Mech – year: 1987 ident: b0355 article-title: Effects of plastic straining on residual stresses induced by shot-peening publication-title: International Conferences on Shot Peening. ICSP-3 – volume: 110 start-page: 104379 year: 2020 ident: b0115 article-title: Literature review of fatigue assessment methods in residual stressed state publication-title: Eng Fail Anal – reference: Ramberg W, Osgood WR. Description of stress-strain curves by three parameters (No. NACA-TN-902). – volume: 20 start-page: 351 year: 1998 end-page: 357 ident: b0020 article-title: Mechanism of creation of compressive residual stress by shot peening publication-title: Int J Fatigue – reference: SAE International. – volume: 32 start-page: 1279 year: Aug. 2017 end-page: 1289 ident: b0270 article-title: Ball-burnishing effect on deep residual stress on AISI 1038 and AA2017-T4 publication-title: Mater Manuf Processes – volume: 615 start-page: 70 year: Oct. 2014 end-page: 78 ident: b0140 article-title: Residual stress redistribution in shot peened samples subject to mechanical loading publication-title: Mater Sci Eng, A – volume: 26 start-page: 1053 year: Oct. 2004 end-page: 1067 ident: b0085 article-title: High cycle fatigue behavior prediction of shot-peened parts publication-title: Int J Fatigue – reference: ; 2002. p. 711–8, doi: 10.4271/2002/-01-1409. – volume: 204 start-page: 3546 year: 2010 end-page: 3551 ident: b0010 article-title: The effect of shot peening on fatigue and corrosion behavior of 316L stainless steel in Ringer's solution publication-title: Surf Coat Technol – volume: 119 start-page: 338 year: Feb. 2019 end-page: 354 ident: b0205 article-title: Effect of shot-peening and low-plasticity burnishing on the high-cycle fatigue strength of DIN 34CrNiMo6 alloy steel publication-title: Int J Fatigue – reference: Fitzpatrick ME, Fry AT, Holdway P, Kandil FA, Shackleton J, Suominen L. Determination of residual stresses by X-ray diffraction; 2005. – year: 2013 ident: b0055 article-title: Residual stress: measurement by diffraction and interpretation – volume: 55 start-page: 230 year: 2013 end-page: 244 ident: b0200 article-title: Influence of low-plasticity ball burnishing on the high-cycle fatigue strength of medium carbon AISI 1045 steel publication-title: Int J Fatigue – volume: 375 start-page: 508 year: Oct. 2019 end-page: 517 ident: b0315 article-title: Surface modification through combination of finish turning with low plasticity burnishing and its effect on fatigue performance for Inconel 718 publication-title: Surf Coat Technol – year: 1996 ident: b0305 article-title: Relaxation of shot peening induced residual stresses in quenched and tempered steel AISI 4140 due to uniaxial cyclic deformation publication-title: International Conferences on Shot Peening. ISCP-6 – volume: 666 start-page: 65 year: 2016 end-page: 70 ident: b0135 article-title: Characterization on surface mechanical properties of Ti–6Al–4V after shot peening publication-title: J Alloy Compd – volume: 162-163 start-page: 498 year: 2005 end-page: 503 ident: b0155 article-title: Effect of processing temperature on warm shot peening of spring steel publication-title: J Mater Process Technol – volume: 137 start-page: 105621 year: 2020 ident: 10.1016/j.ijfatigue.2022.107006_b0190 article-title: Characterization of shot peening properties and modelling on the fatigue performance of 304 austenitic stainless steel publication-title: Int J Fatigue doi: 10.1016/j.ijfatigue.2020.105621 – year: 2015 ident: 10.1016/j.ijfatigue.2022.107006_b0330 – volume: 30 start-page: 2050 issue: 10–11 year: 2008 ident: 10.1016/j.ijfatigue.2022.107006_b0030 article-title: The effect of machining on the surface integrity and fatigue life publication-title: Int J Fatigue doi: 10.1016/j.ijfatigue.2008.01.005 – year: 2013 ident: 10.1016/j.ijfatigue.2022.107006_b0055 – year: 1981 ident: 10.1016/j.ijfatigue.2022.107006_b0335 – volume: 74 start-page: 273 year: 2014 ident: 10.1016/j.ijfatigue.2022.107006_b0060 article-title: Shot peening intensity optimization to increase the fatigue life of a quenched and tempered structural steel publication-title: Proc Eng doi: 10.1016/j.proeng.2014.06.261 – volume: 248 start-page: 9 issue: 1-2 year: 1998 ident: 10.1016/j.ijfatigue.2022.107006_b0090 article-title: Residual stress relaxation in an AISI 4140 steel due to quasistatic and cyclic loading at higher temperatures publication-title: Mater Sci Eng doi: 10.1016/S0921-5093(98)00522-X – volume: 81 start-page: 56 year: 2012 ident: 10.1016/j.ijfatigue.2022.107006_b0165 article-title: Fatigue behavior of a low-alloy steel with nanostructured surface obtained by severe shot peening publication-title: Eng Fract Mech doi: 10.1016/j.engfracmech.2011.06.011 – volume: 17 start-page: 493 issue: 7 year: 1995 ident: 10.1016/j.ijfatigue.2022.107006_b0040 article-title: Fatigue crack initiation and propagation on shot-peened surfaces in A316 stainless steel publication-title: Int J Fatigue doi: 10.1016/0142-1123(95)00044-T – volume: 66 start-page: 340 year: 1958 ident: 10.1016/j.ijfatigue.2022.107006_b0260 article-title: Mathematical correction for stress in removed layers in X-ray diffraction residual stress analysis publication-title: SAE Trans – volume: 20 start-page: 351 issue: 5 year: 1998 ident: 10.1016/j.ijfatigue.2022.107006_b0020 article-title: Mechanism of creation of compressive residual stress by shot peening publication-title: Int J Fatigue doi: 10.1016/S0142-1123(98)00002-4 – volume: 2 start-page: 111 year: 1972 ident: 10.1016/j.ijfatigue.2022.107006_b0195 article-title: The behavior of residual stress during fatigue stress cycles publication-title: Proceedings of the International Conference on Mechanical Behavior of Metals II – volume: 356 start-page: 475 year: 2015 ident: 10.1016/j.ijfatigue.2022.107006_b0100 article-title: Study of the effects produced by shot peening on the surface of quenched and tempered steels: roughness, residual stresses and work hardening publication-title: Appl Surf Sci doi: 10.1016/j.apsusc.2015.08.110 – volume: 58 start-page: 28 issue: 1 year: 2012 ident: 10.1016/j.ijfatigue.2022.107006_b0230 article-title: Low-cycle fatigue behaviour of 34CrNiMo6 high strength steel publication-title: Theor Appl Fract Mech doi: 10.1016/j.tafmec.2012.02.004 – ident: 10.1016/j.ijfatigue.2022.107006_b0290 – volume: 26 start-page: 1053 issue: 10 year: 2004 ident: 10.1016/j.ijfatigue.2022.107006_b0085 article-title: High cycle fatigue behavior prediction of shot-peened parts publication-title: Int J Fatigue doi: 10.1016/j.ijfatigue.2004.03.007 – volume: 30 start-page: 173 issue: 3 year: 2007 ident: 10.1016/j.ijfatigue.2022.107006_b0075 article-title: A literature survey on the stability and significance of residual stresses during fatigue publication-title: Fatigue Fract Eng Mater Struct doi: 10.1111/j.1460-2695.2007.01102.x – volume: 48 start-page: 109 year: 2013 ident: 10.1016/j.ijfatigue.2022.107006_b0070 article-title: Evaluation of residual stress relaxation and its effect on fatigue strength of AISI 316L stainless steel ground surfaces: Experimental and numerical approaches publication-title: Int J Fatigue doi: 10.1016/j.ijfatigue.2012.10.008 – year: 2002 ident: 10.1016/j.ijfatigue.2022.107006_b0185 article-title: Comparison of surface characteristics and thermal residual stress relaxation of laser peened and shot peened AISI 4140 publication-title: International Conferences on Shot Peening. ICSP-8 – volume: vol. 42 year: 2013 ident: 10.1016/j.ijfatigue.2022.107006_b0225 – volume: 119 start-page: 338 year: 2019 ident: 10.1016/j.ijfatigue.2022.107006_b0205 article-title: Effect of shot-peening and low-plasticity burnishing on the high-cycle fatigue strength of DIN 34CrNiMo6 alloy steel publication-title: Int J Fatigue doi: 10.1016/j.ijfatigue.2018.10.014 – volume: 375 start-page: 508 year: 2019 ident: 10.1016/j.ijfatigue.2022.107006_b0315 article-title: Surface modification through combination of finish turning with low plasticity burnishing and its effect on fatigue performance for Inconel 718 publication-title: Surf Coat Technol doi: 10.1016/j.surfcoat.2019.07.057 – volume: 133 start-page: 99 year: 2015 ident: 10.1016/j.ijfatigue.2022.107006_b0310 article-title: Effect of surface flaw on fatigue strength of shot-peened medium-carbon steel publication-title: Eng Fract Mech doi: 10.1016/j.engfracmech.2014.11.005 – year: 1981 ident: 10.1016/j.ijfatigue.2022.107006_b0015 article-title: Shot-peening publication-title: International Conferences on Shot Peening. ISCP-1 – volume: 26 start-page: 889 issue: 8 year: 2004 ident: 10.1016/j.ijfatigue.2022.107006_b0125 article-title: Bending fatigue behaviour of differently shot peened A1 6082 T5 alloy publication-title: Int J Fatigue doi: 10.1016/j.ijfatigue.2003.12.003 – year: 1963 ident: 10.1016/j.ijfatigue.2022.107006_b0240 article-title: Fatigue behavior of materials under strain cycling in low and intermediate life range publication-title: National Aeronautics and Space Administration Cleveland Oh Lewis Research Center – volume: 2 start-page: 55 year: 1987 ident: 10.1016/j.ijfatigue.2022.107006_b0280 article-title: Statistical SN testing method with 14 specimens: JSME standard method for determination of SN curve publication-title: Statist Res Fatigue Fract-Current Japanese Mater Res – ident: 10.1016/j.ijfatigue.2022.107006_b0220 – year: 1983 ident: 10.1016/j.ijfatigue.2022.107006_b0340 article-title: Fundamentals of machine component design publication-title: J Mech Trans Autom Design doi: 10.1115/1.3258522 – year: 1990 ident: 10.1016/j.ijfatigue.2022.107006_b0275 article-title: Microstructural investigations of the shot-peened steel 42 CrMo 4 in different heat treatment conditions by the aid of a X-ray profile analysis publication-title: International Conferences on Shot Peening. ICSP-4 – volume: 23 start-page: 31 year: 2001 ident: 10.1016/j.ijfatigue.2022.107006_b0145 article-title: Investigation of residual stress relaxation under cyclic load publication-title: Int J Fatigue doi: 10.1016/S0142-1123(01)00132-3 – year: 2002 ident: 10.1016/j.ijfatigue.2022.107006_b0105 article-title: Influence of pre-annealing on surface and surface layer characteristics produced by shot peening publication-title: International Conferences on Shot Peening. ICSP-8 – year: 1996 ident: 10.1016/j.ijfatigue.2022.107006_b0305 article-title: Relaxation of shot peening induced residual stresses in quenched and tempered steel AISI 4140 due to uniaxial cyclic deformation publication-title: International Conferences on Shot Peening. ISCP-6 – volume: 206 start-page: 2817 issue: 11 year: 2012 ident: 10.1016/j.ijfatigue.2022.107006_b0215 article-title: Surface improvement of shafts by the deep ball-burnishing technique publication-title: Surf Coat Technol doi: 10.1016/j.surfcoat.2011.11.045 – ident: 10.1016/j.ijfatigue.2022.107006_b0255 – volume: 204 start-page: 3546 issue: 21-22 year: 2010 ident: 10.1016/j.ijfatigue.2022.107006_b0010 article-title: The effect of shot peening on fatigue and corrosion behavior of 316L stainless steel in Ringer's solution publication-title: Surf Coat Technol doi: 10.1016/j.surfcoat.2010.04.015 – year: 2015 ident: 10.1016/j.ijfatigue.2022.107006_b0245 article-title: ASTM E466–15 Standard practice for conducting force controlled constant amplitude axial fatigue tests of metallic materials publication-title: ASTM International – volume: 10 start-page: 625 year: 1910 ident: 10.1016/j.ijfatigue.2022.107006_b0295 article-title: The exponential law of endurance tests publication-title: Am Soc Test Mater Proc – year: 1981 ident: 10.1016/j.ijfatigue.2022.107006_b0360 article-title: Influence of shot peening on the fatigue behavior of titanium alloys publication-title: International Conferences on Shot Peening. ICSP-1 – volume: 162-163 start-page: 498 year: 2005 ident: 10.1016/j.ijfatigue.2022.107006_b0155 article-title: Effect of processing temperature on warm shot peening of spring steel publication-title: J Mater Process Technol doi: 10.1016/j.jmatprotec.2005.02.095 – ident: 10.1016/j.ijfatigue.2022.107006_b0160 doi: 10.4271/2002-01-1409 – volume: 293 start-page: 191 issue: 1-2 year: 2000 ident: 10.1016/j.ijfatigue.2022.107006_b0150 article-title: Effects of warm peening on fatigue life and relaxation behaviour of residual stresses in AISI 4140 steel publication-title: Mater Sci Eng doi: 10.1016/S0921-5093(00)01035-2 – year: 1962 ident: 10.1016/j.ijfatigue.2022.107006_b0320 – year: 2002 ident: 10.1016/j.ijfatigue.2022.107006_b0065 article-title: The Effect of Shot Peening Coverage on Residual Stress, Cold Work and Fatigue in a Ni-Cr-Mo Low Alloy Steel publication-title: International Conferences on Shot Peening. ICSP-8 – volume: 31 start-page: 1225 issue: 8–9 year: 2009 ident: 10.1016/j.ijfatigue.2022.107006_b0130 article-title: Reverse bending fatigue of shot peened 7075–T651 aluminium alloy: The role of residual stress relaxation publication-title: Int J Fatigue doi: 10.1016/j.ijfatigue.2008.11.017 – volume: 666 start-page: 65 year: 2016 ident: 10.1016/j.ijfatigue.2022.107006_b0135 article-title: Characterization on surface mechanical properties of Ti–6Al–4V after shot peening publication-title: J Alloy Compd doi: 10.1016/j.jallcom.2016.01.119 – volume: 55 start-page: 230 year: 2013 ident: 10.1016/j.ijfatigue.2022.107006_b0200 article-title: Influence of low-plasticity ball burnishing on the high-cycle fatigue strength of medium carbon AISI 1045 steel publication-title: Int J Fatigue doi: 10.1016/j.ijfatigue.2013.06.024 – volume: 8 issue: 213 year: 2018 ident: 10.1016/j.ijfatigue.2022.107006_b0210 article-title: Mean Stress Effect on the Axial Fatigue Strength of DIN 34CrNiMo6 Quenched and tempered Steel publication-title: Metals (Basel) – volume: 6 issue: 5 year: 2016 ident: 10.1016/j.ijfatigue.2022.107006_b0235 article-title: Monotonic and cyclic behavior of DIN 34CrNiMo6 tempered alloy steel publication-title: Metals (Basel) doi: 10.3390/met6050098 – year: 1987 ident: 10.1016/j.ijfatigue.2022.107006_b0355 article-title: Effects of plastic straining on residual stresses induced by shot-peening publication-title: International Conferences on Shot Peening. ICSP-3 – volume: 258 start-page: 6831 issue: 18 year: 2012 ident: 10.1016/j.ijfatigue.2022.107006_b0050 article-title: Numerical and experimental analysis of surface roughness generated by shot peening publication-title: Appl Surf Sci doi: 10.1016/j.apsusc.2012.03.111 – year: 1996 ident: 10.1016/j.ijfatigue.2022.107006_b0265 article-title: Relaxation of residual stress distribution produced by shot peening under fatigue test publication-title: International Conferences on Shot Peening. ICSP-6 – volume: 110 start-page: 104379 year: 2020 ident: 10.1016/j.ijfatigue.2022.107006_b0115 article-title: Literature review of fatigue assessment methods in residual stressed state publication-title: Eng Fail Anal doi: 10.1016/j.engfailanal.2020.104379 – volume: 33 start-page: 1477 issue: 11 year: 2011 ident: 10.1016/j.ijfatigue.2022.107006_b0345 article-title: Influence of laser polishing on the high cycle fatigue strength of medium carbon AISI 1045 steel publication-title: Int J Fatigue doi: 10.1016/j.ijfatigue.2011.06.004 – volume: 615 start-page: 70 year: 2014 ident: 10.1016/j.ijfatigue.2022.107006_b0140 article-title: Residual stress redistribution in shot peened samples subject to mechanical loading publication-title: Mater Sci Eng, A doi: 10.1016/j.msea.2014.06.118 – ident: 10.1016/j.ijfatigue.2022.107006_b0250 – volume: 26 start-page: 975 issue: 9 year: 2004 ident: 10.1016/j.ijfatigue.2022.107006_b0180 article-title: The influence of surface enhancement by low plasticity burnishing on the corrosion fatigue performance of AA7075-T6 publication-title: Int J Fatigue doi: 10.1016/j.ijfatigue.2004.01.010 – volume: 25 start-page: 471 issue: 6 year: 2003 ident: 10.1016/j.ijfatigue.2022.107006_b0285 article-title: Independence of the torsional fatigue limit upon a mean shear stress publication-title: Int J Fatigue doi: 10.1016/S0142-1123(02)00174-3 – volume: 290 start-page: 223 year: 2014 ident: 10.1016/j.ijfatigue.2022.107006_b0005 article-title: Friction and wear behavior of shot peened surfaces of 36CrNiMo4 and 36NiCrMo16 alloyed steels under dry and lubricated contact conditions publication-title: Appl Surf Sci doi: 10.1016/j.apsusc.2013.11.050 – volume: 32 start-page: 567 issue: 7 year: 2009 ident: 10.1016/j.ijfatigue.2022.107006_b0365 article-title: Fatigue behaviour of duplex stainless steel reinforcing bars subjected to shot peening publication-title: Fatigue Fract Eng Mater Struct doi: 10.1111/j.1460-2695.2009.01360.x – volume: 4 start-page: 367 year: 1987 ident: 10.1016/j.ijfatigue.2022.107006_b0080 article-title: Relaxation of residual stresses by annealing or mechanical treatment publication-title: Pergamon Press, Advances Surface Treatments Technology–Applications–Effects – year: 1987 ident: 10.1016/j.ijfatigue.2022.107006_b0095 article-title: Fatigue strenght of shot-peened grade 35NCD 16 steel. Variation of residual stresses introduced by shot peening according to type of loading publication-title: International Conferences on Shot Peening. ICSP-3 – year: 2006 ident: 10.1016/j.ijfatigue.2022.107006_b0325 – volume: 23 start-page: 607 year: 2001 ident: 10.1016/j.ijfatigue.2022.107006_b0035 article-title: Effects of surface treatments on the fatigue strength of AISI 4340 aeronautical steel publication-title: Int J Fatigue doi: 10.1016/S0142-1123(01)00015-9 – volume: 32 start-page: 1279 issue: 11 year: 2017 ident: 10.1016/j.ijfatigue.2022.107006_b0270 article-title: Ball-burnishing effect on deep residual stress on AISI 1038 and AA2017-T4 publication-title: Mater Manuf Processes doi: 10.1080/10426914.2017.1317351 – year: 1993 ident: 10.1016/j.ijfatigue.2022.107006_b0120 article-title: Observations on shot peening residual stresses in 17 Cr-7 Ni austenitic stainless steel and their redistribution via mechanical loading publication-title: International Conferences on Shot Peening. ISCP-5 – volume: 24 start-page: 877 year: 2002 ident: 10.1016/j.ijfatigue.2022.107006_b0045 article-title: An evaluation of shot peening, residual stress and stress relaxation on the fatigue life of AISI 4340 steel publication-title: Int J Fatigue doi: 10.1016/S0142-1123(01)00205-5 – volume: 65 start-page: 64 year: 2014 ident: 10.1016/j.ijfatigue.2022.107006_b0170 article-title: Effect of severe shot peening on microstructure and fatigue strength of cast iron publication-title: Int J Fatigue doi: 10.1016/j.ijfatigue.2013.08.022 – year: 1990 ident: 10.1016/j.ijfatigue.2022.107006_b0300 article-title: Relaxation of shot peening residual stresses of the steel 42 CrMo 4 by tensile or compressive deformation publication-title: International Conferences on Shot Peening. ISCP-4 – year: 1996 ident: 10.1016/j.ijfatigue.2022.107006_b0350 article-title: Relaxation behaviour of shot peening induced residual stresses in AISI 4140 due to quasistatic uniaxial loading at elevated temperatures publication-title: International Conferences on Shot Peening. ICSP-6 – volume: 6 start-page: Dec issue: 1 year: 2016 ident: 10.1016/j.ijfatigue.2022.107006_b0175 article-title: Residual stress distribution and microstructure at a laser spot of AISI 304 stainless steel subjected to different laser shock peening impacts publication-title: Metals (Basel) – volume: 528 start-page: 1008 issue: 3 year: 2011 ident: 10.1016/j.ijfatigue.2022.107006_b0110 article-title: Stability of shot peening induced residual stresses and their influence on fatigue lifetime publication-title: Mater Sci Eng, A doi: 10.1016/j.msea.2010.09.050 – year: 2002 ident: 10.1016/j.ijfatigue.2022.107006_b0025 article-title: Handbook of residual stress and deformation of steel publication-title: ASM Int
SSID	ssj0009075
Score	2.523947
Snippet	•Shot-peening process, compared with machined specimens, increases by 21.8% fatigue limit.•Quasi-static tests show more stress relaxation with compressive... Shot-peening treatment was applied to a quenched and tempered DIN 34CrNiMo6 steel to improve its high-cycle R: −1 axial fatigue strength. Compared with the...
SourceID	proquest crossref elsevier
SourceType	Aggregation Database Enrichment Source Index Database Publisher
StartPage	107006
SubjectTerms	34CrNiMo6 steel Alloy steels Axial loads Axial stress Bending fatigue Compressive properties Cyclic relaxation Fatigue life Fatigue limit Fatigue strength Heat treating High-cycle fatigue Materials fatigue Mechanical properties Metal fatigue Nickel chromium molybdenum steels Plastic deformation Quenching and tempering Relaxation of residual stresses Residual stress Residual stresses S N diagrams Shot peening Static tests Stress distribution Stress relaxation Surface roughness
Title	Fatigue improvement and residual stress relaxation of shot-peened alloy steel DIN 34CrNiMo6 under axial loading
URI	https://dx.doi.org/10.1016/j.ijfatigue.2022.107006 https://www.proquest.com/docview/2686215403
Volume	162
WOSCitedRecordID	wos000829870800004&url=https%3A%2F%2Fcvtisr.summon.serialssolutions.com%2F%23%21%2Fsearch%3Fho%3Df%26include.ft.matches%3Dt%26l%3Dnull%26q%3D
hasFullText	1
inHoldings	1
isFullTextHit
isPrint
journalDatabaseRights	– providerCode: PRVESC databaseName: ScienceDirect database customDbUrl: eissn: 1879-3452 dateEnd: 99991231 omitProxy: false ssIdentifier: ssj0009075 issn: 0142-1123 databaseCode: AIEXJ dateStart: 19950101 isFulltext: true titleUrlDefault: https://www.sciencedirect.com providerName: Elsevier
link	http://cvtisr.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwtV3Pb9MwFLbKxgEOiJ_aYCAfuE2p0jpLHG5j2sTQiDgM1Ftkuy8lVZVUaTsV_hP-W55_xGkHqOzAJa2i2nH6vtjfe3nvMyFv0zRhMQ-jgCsduhFKBimACERRKJHKhI1N1fvXqyTL-GiUfu71fra1MDezpKr4ep3O_6up8RwaW5fO3sHcvlM8gd_R6HhEs-Pxnwx_gZ-TFej6x6Y2auAuiRwWtvDKlYfoKpa1J4yLb_UymKNTiwRUv4v_jj8DwCnxMjtm0VmTlZ_q2Gya2xyLtQ6zz2rh171plw_fhRc3RCkKO6Yu-2eyKisxqRGGhrxmoEUjPfhmsvyxsiXw-g2F9EvHlWgaod_tvx8IFxEurVyyD12g19vmZnXRzGGAhI9tTcdudrYTKnqnoZEk-H2ut2GHab-cupvo62v0uxbb6tq3Vj2fi9imuU1z31GuO8ptR_fI_jA5SXHC3D-9PB997BSdrYqzv4et5ME_julv1OcWCTDM5voxeeRcEnpqofSE9KB6Sh5uCFU-I7UDFd0AFUVQ0RZU1IKKdqCidUE3QEUNqKgBFUVQUQ8qakBFDaioA9Vz8uXi_PrsQ-C26ggUEuxlwMc62zEZxgI9YC1RJyRwxSWLIebACqXQcZCDcTwciBNIokKyENJwrEImBYtD9oLsVXUFB4QioZbIkUWCy0MUAXDget8hSGOJrnXBD0nc_ou5cjr2ejuVWb7Dkock9A3nVspld5N3rZlyx0gt08wRhLsbH7WGzd0Tt8iHuiIL3ZaQvbz7cF6RB91jdET2ls0KXpP76mZZLpo3DqC_AKsxvfQ
linkProvider	Elsevier
openUrl	ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Fatigue+improvement+and+residual+stress+relaxation+of+shot-peened+alloy+steel+DIN+34CrNiMo6+under+axial+loading&rft.jtitle=International+journal+of+fatigue&rft.au=Leguinagoicoa%2C+Nelson&rft.au=Albizuri%2C+Joseba&rft.au=Larra%C3%B1aga%2C+Aitor&rft.date=2022-09-01&rft.issn=0142-1123&rft.volume=162&rft.spage=107006&rft_id=info:doi/10.1016%2Fj.ijfatigue.2022.107006&rft.externalDBID=n%2Fa&rft.externalDocID=10_1016_j_ijfatigue_2022_107006
thumbnail_l	http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=0142-1123&client=summon
thumbnail_m	http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=0142-1123&client=summon
thumbnail_s	http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=0142-1123&client=summon