Steady-State Simulation of a Fixed-Bed Reactor for the Total Oxidation of Volatile Organic Components: Application of the Barkelew Criterion

A steady-state tubular reactor for total oxidation reaction under typical industrial conditions in the removal of volatile organic components (VOC) is described using a one-dimensional heterogeneous reactor model with intraparticle diffusion, using a fully developed Langmuir–Hinshelwood reaction rat...

Celý popis

Uloženo v:
Podrobná bibliografie
Vydáno v:ChemEngineering Ročník 9; číslo 3; s. 46
Hlavní autoři: Heynderickx, Philippe M., Thybaut, Joris W.
Médium: Journal Article
Jazyk:angličtina
Vydáno: Basel MDPI AG 01.06.2025
Témata:
Criteria
Diffusion rate
Exothermic reactions
Fractions
Heat transfer
hotspot
Oxidation
Oxidation-reduction reaction
Propane
Reactor design
Reactors
runaway
Simulation
Steady state
steady-state kinetics
Temperature
total oxidation
Volatile organic compounds
ISSN:2305-7084, 2305-7084
On-line přístup:Získat plný text
Tagy: Přidat tag
Žádné tagy, Buďte první, kdo vytvoří štítek k tomuto záznamu!
Popis
Shrnutí:A steady-state tubular reactor for total oxidation reaction under typical industrial conditions in the removal of volatile organic components (VOC) is described using a one-dimensional heterogeneous reactor model with intraparticle diffusion, using a fully developed Langmuir–Hinshelwood reaction rate expression. The effectiveness factor, accounting for these intraparticle diffusion limitations, is calculated with a generalized Thiele modulus. The actual inclusion of this factor shows that higher operational reactor temperatures can be possible, since this diffusion limitation restricts the heat production inside the catalyst particle. Special attention is given to the outlet concentration of propane, taken as the model VOC, and runaway criteria, reported in the literature, are evaluated. Furthermore, the well-known Barkelew criterion (to evaluate runaway for exothermic reactions) is implemented for practical and safe reactor design. This work identifies that the critical couples populating the Barkelew diagram are positioned lower (up to a 50% difference, compared to Barkelew’s original report), so that operation of the reactor under higher hydrocarbon molar inlet fractions is possible while maintaining safe performance.
Bibliografie:ObjectType-Article-1
SourceType-Scholarly Journals-1
ObjectType-Feature-2
content type line 14
ISSN:2305-7084
2305-7084
DOI:10.3390/chemengineering9030046