Modelling of dynamic damage and failure in aluminium alloys
A physically based damage and failure model, applicable to orthotropic metals is proposed in this paper. To account for the physical mechanisms of failure, the concept of thermally activated damage initially proposed by Klepaczko [1], has been adopted as the basis for the model. This assumption make...
Uložené v:
| Vydané v: | International journal of impact engineering Ročník 49; s. 61 - 76 |
|---|---|
| Hlavní autori: | , , , |
| Médium: | Journal Article |
| Jazyk: | English |
| Vydavateľské údaje: |
Kidlington
Elsevier Ltd
01.11.2012
Elsevier |
| Predmet: | |
| ISSN: | 0734-743X, 1879-3509 |
| On-line prístup: | Získať plný text |
| Tagy: |
Pridať tag
Žiadne tagy, Buďte prvý, kto otaguje tento záznam!
|
| Abstract | A physically based damage and failure model, applicable to orthotropic metals is proposed in this paper. To account for the physical mechanisms of failure, the concept of thermally activated damage initially proposed by Klepaczko [1], has been adopted as the basis for the model. This assumption makes the proposed damage/failure model compatible with the Mechanical Threshold Strength (MTS) model [2–6], which was used within the overall constitutive model to describe material behaviour in the plastic regime. A shock equation of state [7] was coupled with the rest of the constitutive model to allow for modelling of shock wave propagation in the material. The new model was implemented in DYNA3D [8] and coupled with our in-house non-linear transient SPH code, MCM (Meshless Continuum Mechanics).
Parameters for the new constitutive model, i.e. parameters for the plasticity model and the damage model, were derived on the basis of the uniaxial tensile tests and Taylor anvil tests. The subject of investigation is a polycrystalline aluminium alloy AA7010, whose orthotropy is a consequence of meso-scale phase distribution, or grain morphology. Tensile tests were performed for the range of temperatures between 223.15K and 473.15K, and strain rates between 6.4×10−4s−1 and 6.4×102s−1.
In order to validate the new damage model, a numerical simulation of Taylor anvil tests has been performed for AA7010, using a single stage gas gun at velocity of 200m/s. The numerical analysis clearly demonstrates the ability of this new model to predict experimentally observed damage and failure. |
|---|---|
| AbstractList | A physically based damage and failure model, applicable to orthotropic metals is proposed in this paper. To account for the physical mechanisms of failure, the concept of thermally activated damage initially proposed by Klepaczko [1], has been adopted as the basis for the model. This assumption makes the proposed damage/failure model compatible with the Mechanical Threshold Strength (MTS) model [2–6], which was used within the overall constitutive model to describe material behaviour in the plastic regime. A shock equation of state [7] was coupled with the rest of the constitutive model to allow for modelling of shock wave propagation in the material. The new model was implemented in DYNA3D [8] and coupled with our in-house non-linear transient SPH code, MCM (Meshless Continuum Mechanics).
Parameters for the new constitutive model, i.e. parameters for the plasticity model and the damage model, were derived on the basis of the uniaxial tensile tests and Taylor anvil tests. The subject of investigation is a polycrystalline aluminium alloy AA7010, whose orthotropy is a consequence of meso-scale phase distribution, or grain morphology. Tensile tests were performed for the range of temperatures between 223.15K and 473.15K, and strain rates between 6.4×10−4s−1 and 6.4×102s−1.
In order to validate the new damage model, a numerical simulation of Taylor anvil tests has been performed for AA7010, using a single stage gas gun at velocity of 200m/s. The numerical analysis clearly demonstrates the ability of this new model to predict experimentally observed damage and failure. A physically based damage and failure model, applicable to orthotropic metals is proposed in this paper. To account for the physical mechanisms of failure, the concept of thermally activated damage initially proposed by Klepaczko [1], has been adopted as the basis for the model. This assumption makes the proposed damage/failure model compatible with the Mechanical Threshold Strength (MTS) model [2-6], which was used within the overall constitutive model to describe material behaviour in the plastic regime. A shock equation of state [7] was coupled with the rest of the constitutive model to allow for modelling of shock wave propagation in the material. The new model was implemented in DYNA3D [8] and coupled with our in-house non-linear transient SPH code, MCM (Meshless Continuum Mechanics). |
| Author | Vignjevic, R. Campbell, J. Djordjevic, N. Panov, V. |
| Author_xml | – sequence: 1 givenname: R. surname: Vignjevic fullname: Vignjevic, R. email: v.rade@cranfield.ac.uk – sequence: 2 givenname: N. surname: Djordjevic fullname: Djordjevic, N. – sequence: 3 givenname: J. surname: Campbell fullname: Campbell, J. – sequence: 4 givenname: V. surname: Panov fullname: Panov, V. |
| BackLink | http://pascal-francis.inist.fr/vibad/index.php?action=getRecordDetail&idt=26280445$$DView record in Pascal Francis |
| BookMark | eNqFkE1P3DAQhi1EJRbKX0C5IPWS4K_EG9FDK1Q-JFAvReJmOfZ4NavE3toJ0v77Gi1ceuHkObzPO57nlByHGICQC0YbRll3tW1wi9MOwqbhlPGGiobS_ois2Fr1tWhpf0xWVAlZKyleTshpzltKmaItXZHrp-hgHDFsqugrtw9mQls5M5kNVCa4yhsclwQVhsqMy4QBl6lMY9znr-SLN2OG8_f3jDzf_vpzc18__r57uPn5WFuh2rlWXgxKmr4feslku-ZeArOyBz4wpsTQCeYUgOfeOueEHDrKeWucdGpwqmPijHw79O5S_LtAnvWE2ZZfmwBxyZrRNedMUtmV6OV71GRrRp9MsJj1LuFk0l7zjq-plG3JfT_kbIo5J_Da4mxmjGFO5eBSqd_c6q3-cKvf3GoqdHFb8O4__GPDp-CPAwjF1ytC0tkiBAsOE9hZu4ifVfwDZEGZdA |
| CODEN | IJIED4 |
| CitedBy_id | crossref_primary_10_1177_0309324713488885 crossref_primary_10_3390_ma17174281 crossref_primary_10_1007_s11661_014_2667_5 crossref_primary_10_4028_www_scientific_net_AMM_575_721 crossref_primary_10_1016_j_ijsolstr_2015_02_009 crossref_primary_10_1051_matecconf_20165905002 crossref_primary_10_1016_j_ijimpeng_2016_11_017 crossref_primary_10_1016_j_mechmat_2015_11_012 crossref_primary_10_1016_j_ijplas_2019_11_014 crossref_primary_10_1016_j_ijimpeng_2015_08_008 crossref_primary_10_1016_j_matchar_2018_01_011 crossref_primary_10_1016_j_tws_2023_111067 crossref_primary_10_3390_ma13081949 crossref_primary_10_3389_fmech_2024_1419210 crossref_primary_10_1016_j_ijimpeng_2015_12_005 crossref_primary_10_1177_1056789520950409 crossref_primary_10_1080_14786435_2013_780667 |
| Cites_doi | 10.1177/105678959400300203 10.1115/1.3443401 10.1016/0011-2275(84)90069-9 10.1016/S0045-7825(99)00218-2 10.1016/S0734-743X(99)00023-8 10.1016/0020-7683(87)90083-7 10.1115/1.3120834 10.1063/1.1524706 10.1007/BF00186808 10.1007/s11661-999-0273-8 10.2140/jomms.2008.3.391 10.1016/0001-6160(88)90030-2 10.1016/S0749-6419(95)00029-1 10.1016/S0020-7683(00)00030-5 10.1016/0020-7683(94)00195-3 10.1016/0020-7683(87)90084-9 10.1016/j.ijplas.2005.10.005 10.1007/BF00189824 10.1016/0020-7683(82)90046-4 10.1007/s11661-000-0226-8 10.1016/S0013-7944(99)00022-3 10.1007/BF02663849 10.1016/j.mechmat.2004.02.003 10.1007/978-3-7091-2824-4_3 10.1016/0020-7683(94)90112-0 10.1016/S0022-5096(99)00048-4 10.1016/0001-6160(84)90213-X 10.1007/BF00962961 10.1115/1.3225775 10.1007/BF00034895 |
| ContentType | Journal Article |
| Copyright | 2012 Elsevier Ltd 2015 INIST-CNRS |
| Copyright_xml | – notice: 2012 Elsevier Ltd – notice: 2015 INIST-CNRS |
| DBID | AAYXX CITATION IQODW 7QF 7SR 7TB 8BQ 8FD FR3 JG9 KR7 |
| DOI | 10.1016/j.ijimpeng.2012.03.009 |
| DatabaseName | CrossRef Pascal-Francis Aluminium Industry Abstracts Engineered Materials Abstracts Mechanical & Transportation Engineering Abstracts METADEX Technology Research Database Engineering Research Database Materials Research Database Civil Engineering Abstracts |
| DatabaseTitle | CrossRef Materials Research Database Civil Engineering Abstracts Engineered Materials Abstracts Aluminium Industry Abstracts Technology Research Database Mechanical & Transportation Engineering Abstracts Engineering Research Database METADEX |
| DatabaseTitleList | Materials Research Database |
| DeliveryMethod | fulltext_linktorsrc |
| Discipline | Engineering Mathematics Physics |
| EISSN | 1879-3509 |
| EndPage | 76 |
| ExternalDocumentID | 26280445 10_1016_j_ijimpeng_2012_03_009 S0734743X12000747 |
| GroupedDBID | --K --M .~1 0R~ 1B1 1~. 1~5 29J 4.4 457 4G. 5GY 5VS 6TJ 7-5 71M 8P~ 9JN AACTN AAEDT AAEDW AAIAV AAIKJ AAKOC AALRI AAOAW AAQFI AAQXK AAXUO ABEFU ABFNM ABJNI ABMAC ABXDB ABYKQ ACDAQ ACGFS ACIWK ACNNM ACRLP ADBBV ADEZE ADMUD ADTZH AEBSH AECPX AEKER AENEX AFKWA AFTJW AGHFR AGUBO AGYEJ AHHHB AHJVU AIEXJ AIKHN AITUG AJBFU AJOXV ALMA_UNASSIGNED_HOLDINGS AMFUW AMRAJ ASPBG AVWKF AXJTR AZFZN BJAXD BKOJK BLXMC CS3 EBS EFJIC EFLBG EJD EO8 EO9 EP2 EP3 F5P FDB FEDTE FGOYB FIRID FNPLU FYGXN G-2 G-Q GBLVA HVGLF HZ~ IHE J1W JJJVA KOM LY7 M41 MO0 N9A O-L O9- OAUVE OZT P-8 P-9 P2P PC. Q38 R2- RIG ROL RPZ SDF SDG SES SET SEW SPC SPCBC SST SSZ T5K TN5 UHS WUQ XPP ZMT ~G- 9DU AATTM AAXKI AAYWO AAYXX ABWVN ACLOT ACRPL ACVFH ADCNI ADNMO AEIPS AEUPX AFJKZ AFPUW AGQPQ AIGII AIIUN AKBMS AKRWK AKYEP ANKPU APXCP CITATION EFKBS ~HD AFXIZ AGCQF AGRNS BNPGV IQODW SSH 7QF 7SR 7TB 8BQ 8FD FR3 JG9 KR7 |
| ID | FETCH-LOGICAL-c375t-7f3b74a99b9414582f4e1c49e2b1173b631d7eef2fcddd34b60225ad4d7bd7613 |
| ISICitedReferencesCount | 21 |
| ISICitedReferencesURI | http://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=Summon&SrcAuth=ProQuest&DestLinkType=CitingArticles&DestApp=WOS_CPL&KeyUT=000308623800006&url=https%3A%2F%2Fcvtisr.summon.serialssolutions.com%2F%23%21%2Fsearch%3Fho%3Df%26include.ft.matches%3Dt%26l%3Dnull%26q%3D |
| ISSN | 0734-743X |
| IngestDate | Mon Sep 29 05:53:55 EDT 2025 Mon Jul 21 09:14:26 EDT 2025 Sat Nov 29 04:50:56 EST 2025 Tue Nov 18 21:04:35 EST 2025 Fri Feb 23 02:28:25 EST 2024 |
| IsPeerReviewed | true |
| IsScholarly | true |
| Keywords | Finite elements Aluminium alloys Damage Strain rate Constitutive equation Polycrystal Ultimate limit Modeling Shock wave Continuum Finite element method Inelasticity Plasticity Gas gun Dynamic model Damaging Transient response Rupture Mechanical properties Aluminium alloy Tension test Orthotropic material Equations of state Mesoscale Thermal activation Meshless method Non linear effect Effective medium model Impact test Strength |
| Language | English |
| License | https://www.elsevier.com/tdm/userlicense/1.0 CC BY 4.0 |
| LinkModel | OpenURL |
| MergedId | FETCHMERGED-LOGICAL-c375t-7f3b74a99b9414582f4e1c49e2b1173b631d7eef2fcddd34b60225ad4d7bd7613 |
| Notes | ObjectType-Article-2 SourceType-Scholarly Journals-1 ObjectType-Feature-1 content type line 23 |
| PQID | 1082214046 |
| PQPubID | 23500 |
| PageCount | 16 |
| ParticipantIDs | proquest_miscellaneous_1082214046 pascalfrancis_primary_26280445 crossref_citationtrail_10_1016_j_ijimpeng_2012_03_009 crossref_primary_10_1016_j_ijimpeng_2012_03_009 elsevier_sciencedirect_doi_10_1016_j_ijimpeng_2012_03_009 |
| PublicationCentury | 2000 |
| PublicationDate | 2012-11-01 |
| PublicationDateYYYYMMDD | 2012-11-01 |
| PublicationDate_xml | – month: 11 year: 2012 text: 2012-11-01 day: 01 |
| PublicationDecade | 2010 |
| PublicationPlace | Kidlington |
| PublicationPlace_xml | – name: Kidlington |
| PublicationTitle | International journal of impact engineering |
| PublicationYear | 2012 |
| Publisher | Elsevier Ltd Elsevier |
| Publisher_xml | – name: Elsevier Ltd – name: Elsevier |
| References | Gilman, Tuler (bib39) 1970; 6 Gurson (bib9) 1977; 99 Simo, Ju (bib19) 1987; 23 Krausz, Eyring (bib42) 1975 Zhu, Cescotto (bib17) 1995; 32 Hansen, Schreyer (bib27) 1994; 31 Voyiadjis, Abed (bib21) 2006; 22 Dremin, Molodets (bib43) 1985 Banerjee, Bhawalkar (bib24) 2008; 3 Follansbee, Kocks (bib2) 1988; 36 Preston, Tonks, Wallace (bib23) 2003; 93 Krajcinovic (bib12) 1996 Bammann (bib32) 1990; 43 Goto, Bingert, Chen, Gray, Garrett (bib4) 2000; 31 Liu (bib8) 2004 Bammann, Johnson, Chiesa (bib33) 1990 Zhurkov (bib40) 1984; 26 Hill (bib37) 1950 Hammi Y. Simulation Numerique de l'Endommagement dans les Precedes de Mise en Forme; 2000. Chow, Wang (bib18) 1987; 33 Voyiadjis, Abed (bib22) 2005; 37 Lubarda, Krajcinovic (bib28) 1995; 11 Saanouni, Forster, Ben Hatira (bib30) 1994; 3 Tvergaard, Needleman (bib11) 1984; 32 Rosakis, Rosakis, Ravichandran, Hodowany (bib29) 2000; 48 Saanouni, Chaboche (bib16) 2003 Tuler, Butcher (bib38) 1968; 4 Truesdell (bib25) 1960 Voyiadjis, Deliktas (bib14) 2000; 183 Chevrier, Klepaczko (bib44) 1999; 63 Chen, Maudlin, Gray (bib5) 1998 Gray, Chen, Vecchio (bib6) 1999; 30 Steinberg (bib7) 1991 Binning, Partridge (bib46) 1984; 24 Simo, Ju (bib20) 1987; 23 Chen, Gray (bib3) 1996; 27 Malvern (bib31) 1969 Lemaitre (bib13) 1985; 107 Klepaczko (bib1) 1990 Tvergaard (bib10) 1982; 18 Cordebois, Sidoroff (bib34) 1980 Hanim, Klepaczko (bib45) 1999; 22 Carol, Rizzi, Willam (bib36) 2001; 38 Noll, Truesdell (bib26) 1965 Kachanov (bib35) 1958; 8 Meyers (bib41) 1994 Saanouni (10.1016/j.ijimpeng.2012.03.009_bib16) 2003 Truesdell (10.1016/j.ijimpeng.2012.03.009_bib25) 1960 Follansbee (10.1016/j.ijimpeng.2012.03.009_bib2) 1988; 36 Tvergaard (10.1016/j.ijimpeng.2012.03.009_bib10) 1982; 18 Simo (10.1016/j.ijimpeng.2012.03.009_bib20) 1987; 23 Gilman (10.1016/j.ijimpeng.2012.03.009_bib39) 1970; 6 Zhu (10.1016/j.ijimpeng.2012.03.009_bib17) 1995; 32 Malvern (10.1016/j.ijimpeng.2012.03.009_bib31) 1969 Bammann (10.1016/j.ijimpeng.2012.03.009_bib33) 1990 Binning (10.1016/j.ijimpeng.2012.03.009_bib46) 1984; 24 Krajcinovic (10.1016/j.ijimpeng.2012.03.009_bib12) 1996 Chen (10.1016/j.ijimpeng.2012.03.009_bib3) 1996; 27 Chen (10.1016/j.ijimpeng.2012.03.009_bib5) 1998 Cordebois (10.1016/j.ijimpeng.2012.03.009_bib34) 1980 Tuler (10.1016/j.ijimpeng.2012.03.009_bib38) 1968; 4 Lemaitre (10.1016/j.ijimpeng.2012.03.009_bib13) 1985; 107 Hill (10.1016/j.ijimpeng.2012.03.009_bib37) 1950 Gray (10.1016/j.ijimpeng.2012.03.009_bib6) 1999; 30 Goto (10.1016/j.ijimpeng.2012.03.009_bib4) 2000; 31 10.1016/j.ijimpeng.2012.03.009_bib15 Preston (10.1016/j.ijimpeng.2012.03.009_bib23) 2003; 93 Hansen (10.1016/j.ijimpeng.2012.03.009_bib27) 1994; 31 Noll (10.1016/j.ijimpeng.2012.03.009_bib26) 1965 Chevrier (10.1016/j.ijimpeng.2012.03.009_bib44) 1999; 63 Klepaczko (10.1016/j.ijimpeng.2012.03.009_bib1) 1990 Chow (10.1016/j.ijimpeng.2012.03.009_bib18) 1987; 33 Voyiadjis (10.1016/j.ijimpeng.2012.03.009_bib21) 2006; 22 Voyiadjis (10.1016/j.ijimpeng.2012.03.009_bib22) 2005; 37 Krausz (10.1016/j.ijimpeng.2012.03.009_bib42) 1975 Tvergaard (10.1016/j.ijimpeng.2012.03.009_bib11) 1984; 32 Bammann (10.1016/j.ijimpeng.2012.03.009_bib32) 1990; 43 Rosakis (10.1016/j.ijimpeng.2012.03.009_bib29) 2000; 48 Liu (10.1016/j.ijimpeng.2012.03.009_bib8) 2004 Kachanov (10.1016/j.ijimpeng.2012.03.009_bib35) 1958; 8 Lubarda (10.1016/j.ijimpeng.2012.03.009_bib28) 1995; 11 Zhurkov (10.1016/j.ijimpeng.2012.03.009_bib40) 1984; 26 Gurson (10.1016/j.ijimpeng.2012.03.009_bib9) 1977; 99 Carol (10.1016/j.ijimpeng.2012.03.009_bib36) 2001; 38 Meyers (10.1016/j.ijimpeng.2012.03.009_bib41) 1994 Banerjee (10.1016/j.ijimpeng.2012.03.009_bib24) 2008; 3 Hanim (10.1016/j.ijimpeng.2012.03.009_bib45) 1999; 22 Steinberg (10.1016/j.ijimpeng.2012.03.009_bib7) 1991 Voyiadjis (10.1016/j.ijimpeng.2012.03.009_bib14) 2000; 183 Simo (10.1016/j.ijimpeng.2012.03.009_bib19) 1987; 23 Saanouni (10.1016/j.ijimpeng.2012.03.009_bib30) 1994; 3 Dremin (10.1016/j.ijimpeng.2012.03.009_bib43) 1985 |
| References_xml | – volume: 48 start-page: 581 year: 2000 end-page: 607 ident: bib29 article-title: Thermodynamic internal variable model for the partition of plastic work into heat and stored energy in metals publication-title: J Mech Phys Solids – volume: 22 start-page: 1398 year: 2006 end-page: 1431 ident: bib21 article-title: A coupled temperature and strain rate dependent yield function for dynamic deformations of bcc metals publication-title: Int J Plast – volume: 4 start-page: 431 year: 1968 end-page: 437 ident: bib38 article-title: A criterion for the time dependence of dynamic fracture publication-title: Int J Fract Mech – year: 1985 ident: bib43 article-title: On the spall strength of metals – volume: 32 start-page: 157 year: 1984 end-page: 169 ident: bib11 article-title: Analysis of the cup-cone fracture in a round tensile bar publication-title: Acta Metal – year: 1994 ident: bib41 article-title: Dynamic behaviour of materials – volume: 31 start-page: 1985 year: 2000 end-page: 1996 ident: bib4 article-title: The mechanical threshold stress constitutive-strength model description of HY-100 steel publication-title: Metal Mater Trans A: Phys Metal Mater Sci – volume: 3 start-page: 391 year: 2008 end-page: 424 ident: bib24 article-title: An extended mechanical threshold stress plasticity model: modeling 6061-T9 aluminum alloy publication-title: J Mech Mater Struct – volume: 3 start-page: 140 year: 1994 end-page: 169 ident: bib30 article-title: On the anelastic flow with damage publication-title: Int J Damage Mech – volume: 27 start-page: 2994 year: 1996 end-page: 3006 ident: bib3 article-title: Constitutive behavior of tantalum and tantalum-tungsten alloys publication-title: Metal Mater Trans A – volume: 38 start-page: 491 year: 2001 end-page: 518 ident: bib36 article-title: On the formulation of anisotropic elastic degradation. I. Theory based on a pseudo-logarithmic damage tensor rate publication-title: Int J Solids Struct – volume: 32 start-page: 1607 year: 1995 end-page: 1641 ident: bib17 article-title: A fully coupled elasto-visco-plastic damage theory for anisotropic materials publication-title: Int J Solids Struct – year: 1969 ident: bib31 article-title: Introduction to the mechanics of a continuous medium – volume: 33 start-page: 3 year: 1987 end-page: 16 ident: bib18 article-title: An anisotropic theory of elasticity for continuum damage mechanics publication-title: Int J Fract – year: 1950 ident: bib37 article-title: The mathematical theory of plasticity – year: 1965 ident: bib26 article-title: The non-linear field theories of mechanics – volume: 30 start-page: 1235 year: 1999 end-page: 1247 ident: bib6 article-title: Influence of grain size on the constitutive response and substructure evolution of MONEL 400 publication-title: Metal Mater Trans A – volume: 26 start-page: 295 year: 1984 end-page: 307 ident: bib40 article-title: Kinetic concept of the strength of solids publication-title: Int J Fract – year: 1990 ident: bib33 article-title: A strain rate dependent flow surface model of plasticity – volume: 8 start-page: 26 year: 1958 end-page: 31 ident: bib35 article-title: Time of the rupture process under creep conditions publication-title: Ivz Akad Nauk SSR Otd Tech Nauk – volume: 63 start-page: 273 year: 1999 end-page: 294 ident: bib44 article-title: Spall fracture: mechanical and microstructural aspects publication-title: Eng Fract Mech – volume: 31 start-page: 359 year: 1994 end-page: 389 ident: bib27 article-title: A thermodynamically consistent framework for theories of elastoplasticity coupled with damage publication-title: Int J Solids Struct – volume: 43 start-page: S312 year: 1990 end-page: S319 ident: bib32 article-title: Modeling temperature and strain rate dependent large deformations of metals publication-title: Appl Mech Rev – year: 1975 ident: bib42 article-title: Deformation kinetics – volume: 93 start-page: 211 year: 2003 end-page: 220 ident: bib23 article-title: Model of plastic deformation for extreme loading conditions publication-title: J Appl Phys – start-page: 45 year: 1980 end-page: 59 ident: bib34 article-title: Anisotropic damage in elasticity and plasticity publication-title: J Mec Theor Appl – volume: 183 start-page: 159 year: 2000 end-page: 199 ident: bib14 article-title: A coupled anisotropic damage model for the inelastic response of composite materials publication-title: Comput Methods Appl Mech Eng – reference: Hammi Y. Simulation Numerique de l'Endommagement dans les Precedes de Mise en Forme; 2000. – year: 1996 ident: bib12 article-title: Damage mechanics – year: 1960 ident: bib25 article-title: Principle of classical mechanics and field theory – Strömungsmechanik III – year: 1991 ident: bib7 article-title: Equation of state and strength properties of selected materials – volume: 99 start-page: 2 year: 1977 end-page: 15 ident: bib9 article-title: Continuum theory of ductile rupture by void nucleation and growth: part 1 – yield criteria and flow rules for porous ductile media publication-title: J Eng Mater Technol Trans ASME – volume: 23 start-page: 841 year: 1987 end-page: 869 ident: bib20 article-title: Strain- and stress-based continuum damage models – II. Computational aspects publication-title: Int J Solids Struct – start-page: 321 year: 2003 end-page: 376 ident: bib16 article-title: Computational damage mechanics. application to metal forming publication-title: Numerical and computational methods – start-page: 155 year: 1998 end-page: 172 ident: bib5 article-title: Mechanical properties and constitutive relations for molybdenum under high rate deformation, molybdenum and molybdenum alloys – year: 2004 ident: bib8 article-title: Dyna3D: a nonlinear, explicit, three-dimensional finite element code for solid and structural mechanics – volume: 11 start-page: 763 year: 1995 end-page: 797 ident: bib28 article-title: Some fundamental issues in rate theory of damage-elastoplasticity publication-title: Int J Plast – volume: 22 start-page: 649 year: 1999 end-page: 673 ident: bib45 article-title: Numerical study of spalling in an aluminum alloy 7020-T6 publication-title: Int J Impact Eng – volume: 24 start-page: 97 year: 1984 end-page: 105 ident: bib46 article-title: Subzero tensile properties of 7010 aluminium alloy and Ti–6A1–4V and IMI550 titanium alloys in sheet form publication-title: Cryogenics – start-page: 428 year: 1990 end-page: 445 ident: bib1 article-title: Dynamic crack initiation, some experimental methods and modelling publication-title: Crack dynamics in metallic materials – volume: 18 start-page: 659 year: 1982 end-page: 672 ident: bib10 article-title: Material failure by void coalescence in localized shear bands publication-title: Int J Solids Struct – volume: 107 start-page: 83 year: 1985 end-page: 89 ident: bib13 article-title: Continuous damage mechanics model for ductile fracture publication-title: J Eng Mater Technol Trans ASME – volume: 36 start-page: 81 year: 1988 end-page: 93 ident: bib2 article-title: A constitutive description of the deformation of copper based on the use of the mechanical threshold stress as an internal state variable publication-title: Acta Metal – volume: 37 start-page: 355 year: 2005 end-page: 378 ident: bib22 article-title: Microstructural based models for bcc and fcc metals with temperature and strain rate dependency publication-title: Mech Mater – volume: 6 start-page: 169 year: 1970 end-page: 182 ident: bib39 article-title: Dynamic fracture by spallation in metals publication-title: Int J Fract Mech – volume: 23 start-page: 821 year: 1987 end-page: 840 ident: bib19 article-title: Strain- and stress-based continuum damage models – I. Formulation publication-title: Int J Solids Struct – start-page: 45 year: 1980 ident: 10.1016/j.ijimpeng.2012.03.009_bib34 article-title: Anisotropic damage in elasticity and plasticity publication-title: J Mec Theor Appl – volume: 3 start-page: 140 year: 1994 ident: 10.1016/j.ijimpeng.2012.03.009_bib30 article-title: On the anelastic flow with damage publication-title: Int J Damage Mech doi: 10.1177/105678959400300203 – volume: 99 start-page: 2 issue: 1 year: 1977 ident: 10.1016/j.ijimpeng.2012.03.009_bib9 article-title: Continuum theory of ductile rupture by void nucleation and growth: part 1 – yield criteria and flow rules for porous ductile media publication-title: J Eng Mater Technol Trans ASME doi: 10.1115/1.3443401 – volume: 24 start-page: 97 issue: 2 year: 1984 ident: 10.1016/j.ijimpeng.2012.03.009_bib46 article-title: Subzero tensile properties of 7010 aluminium alloy and Ti–6A1–4V and IMI550 titanium alloys in sheet form publication-title: Cryogenics doi: 10.1016/0011-2275(84)90069-9 – volume: 183 start-page: 159 issue: 3-4 year: 2000 ident: 10.1016/j.ijimpeng.2012.03.009_bib14 article-title: A coupled anisotropic damage model for the inelastic response of composite materials publication-title: Comput Methods Appl Mech Eng doi: 10.1016/S0045-7825(99)00218-2 – volume: 22 start-page: 649 issue: 7 year: 1999 ident: 10.1016/j.ijimpeng.2012.03.009_bib45 article-title: Numerical study of spalling in an aluminum alloy 7020-T6 publication-title: Int J Impact Eng doi: 10.1016/S0734-743X(99)00023-8 – volume: 23 start-page: 821 issue: 7 year: 1987 ident: 10.1016/j.ijimpeng.2012.03.009_bib19 article-title: Strain- and stress-based continuum damage models – I. Formulation publication-title: Int J Solids Struct doi: 10.1016/0020-7683(87)90083-7 – volume: 43 start-page: S312 issue: 5S year: 1990 ident: 10.1016/j.ijimpeng.2012.03.009_bib32 article-title: Modeling temperature and strain rate dependent large deformations of metals publication-title: Appl Mech Rev doi: 10.1115/1.3120834 – year: 1950 ident: 10.1016/j.ijimpeng.2012.03.009_bib37 – year: 1990 ident: 10.1016/j.ijimpeng.2012.03.009_bib33 – year: 2004 ident: 10.1016/j.ijimpeng.2012.03.009_bib8 – volume: 8 start-page: 26 year: 1958 ident: 10.1016/j.ijimpeng.2012.03.009_bib35 article-title: Time of the rupture process under creep conditions publication-title: Ivz Akad Nauk SSR Otd Tech Nauk – year: 1975 ident: 10.1016/j.ijimpeng.2012.03.009_bib42 – volume: 93 start-page: 211 issue: 1 year: 2003 ident: 10.1016/j.ijimpeng.2012.03.009_bib23 article-title: Model of plastic deformation for extreme loading conditions publication-title: J Appl Phys doi: 10.1063/1.1524706 – volume: 4 start-page: 431 issue: 4 year: 1968 ident: 10.1016/j.ijimpeng.2012.03.009_bib38 article-title: A criterion for the time dependence of dynamic fracture publication-title: Int J Fract Mech doi: 10.1007/BF00186808 – volume: 30 start-page: 1235 issue: 5 year: 1999 ident: 10.1016/j.ijimpeng.2012.03.009_bib6 article-title: Influence of grain size on the constitutive response and substructure evolution of MONEL 400 publication-title: Metal Mater Trans A doi: 10.1007/s11661-999-0273-8 – year: 1985 ident: 10.1016/j.ijimpeng.2012.03.009_bib43 – volume: 3 start-page: 391 issue: 3 year: 2008 ident: 10.1016/j.ijimpeng.2012.03.009_bib24 article-title: An extended mechanical threshold stress plasticity model: modeling 6061-T9 aluminum alloy publication-title: J Mech Mater Struct doi: 10.2140/jomms.2008.3.391 – year: 1994 ident: 10.1016/j.ijimpeng.2012.03.009_bib41 – volume: 36 start-page: 81 issue: 1 year: 1988 ident: 10.1016/j.ijimpeng.2012.03.009_bib2 article-title: A constitutive description of the deformation of copper based on the use of the mechanical threshold stress as an internal state variable publication-title: Acta Metal doi: 10.1016/0001-6160(88)90030-2 – volume: 11 start-page: 763 issue: 7 year: 1995 ident: 10.1016/j.ijimpeng.2012.03.009_bib28 article-title: Some fundamental issues in rate theory of damage-elastoplasticity publication-title: Int J Plast doi: 10.1016/S0749-6419(95)00029-1 – volume: 38 start-page: 491 issue: 4 year: 2001 ident: 10.1016/j.ijimpeng.2012.03.009_bib36 article-title: On the formulation of anisotropic elastic degradation. I. Theory based on a pseudo-logarithmic damage tensor rate publication-title: Int J Solids Struct doi: 10.1016/S0020-7683(00)00030-5 – year: 1969 ident: 10.1016/j.ijimpeng.2012.03.009_bib31 – volume: 32 start-page: 1607 issue: 11 year: 1995 ident: 10.1016/j.ijimpeng.2012.03.009_bib17 article-title: A fully coupled elasto-visco-plastic damage theory for anisotropic materials publication-title: Int J Solids Struct doi: 10.1016/0020-7683(94)00195-3 – volume: 23 start-page: 841 issue: 7 year: 1987 ident: 10.1016/j.ijimpeng.2012.03.009_bib20 article-title: Strain- and stress-based continuum damage models – II. Computational aspects publication-title: Int J Solids Struct doi: 10.1016/0020-7683(87)90084-9 – volume: 22 start-page: 1398 issue: 8 year: 2006 ident: 10.1016/j.ijimpeng.2012.03.009_bib21 article-title: A coupled temperature and strain rate dependent yield function for dynamic deformations of bcc metals publication-title: Int J Plast doi: 10.1016/j.ijplas.2005.10.005 – volume: 6 start-page: 169 issue: 2 year: 1970 ident: 10.1016/j.ijimpeng.2012.03.009_bib39 article-title: Dynamic fracture by spallation in metals publication-title: Int J Fract Mech doi: 10.1007/BF00189824 – year: 1965 ident: 10.1016/j.ijimpeng.2012.03.009_bib26 – year: 1996 ident: 10.1016/j.ijimpeng.2012.03.009_bib12 – volume: 18 start-page: 659 issue: 8 year: 1982 ident: 10.1016/j.ijimpeng.2012.03.009_bib10 article-title: Material failure by void coalescence in localized shear bands publication-title: Int J Solids Struct doi: 10.1016/0020-7683(82)90046-4 – year: 1960 ident: 10.1016/j.ijimpeng.2012.03.009_bib25 – volume: 31 start-page: 1985 issue: 8 year: 2000 ident: 10.1016/j.ijimpeng.2012.03.009_bib4 article-title: The mechanical threshold stress constitutive-strength model description of HY-100 steel publication-title: Metal Mater Trans A: Phys Metal Mater Sci doi: 10.1007/s11661-000-0226-8 – volume: 63 start-page: 273 issue: 3 year: 1999 ident: 10.1016/j.ijimpeng.2012.03.009_bib44 article-title: Spall fracture: mechanical and microstructural aspects publication-title: Eng Fract Mech doi: 10.1016/S0013-7944(99)00022-3 – start-page: 321 year: 2003 ident: 10.1016/j.ijimpeng.2012.03.009_bib16 article-title: Computational damage mechanics. application to metal forming – volume: 27 start-page: 2994 issue: 10 year: 1996 ident: 10.1016/j.ijimpeng.2012.03.009_bib3 article-title: Constitutive behavior of tantalum and tantalum-tungsten alloys publication-title: Metal Mater Trans A doi: 10.1007/BF02663849 – volume: 37 start-page: 355 issue: 2–3 year: 2005 ident: 10.1016/j.ijimpeng.2012.03.009_bib22 article-title: Microstructural based models for bcc and fcc metals with temperature and strain rate dependency publication-title: Mech Mater doi: 10.1016/j.mechmat.2004.02.003 – start-page: 428 year: 1990 ident: 10.1016/j.ijimpeng.2012.03.009_bib1 article-title: Dynamic crack initiation, some experimental methods and modelling doi: 10.1007/978-3-7091-2824-4_3 – volume: 31 start-page: 359 issue: 3 year: 1994 ident: 10.1016/j.ijimpeng.2012.03.009_bib27 article-title: A thermodynamically consistent framework for theories of elastoplasticity coupled with damage publication-title: Int J Solids Struct doi: 10.1016/0020-7683(94)90112-0 – volume: 48 start-page: 581 issue: 3 year: 2000 ident: 10.1016/j.ijimpeng.2012.03.009_bib29 article-title: Thermodynamic internal variable model for the partition of plastic work into heat and stored energy in metals publication-title: J Mech Phys Solids doi: 10.1016/S0022-5096(99)00048-4 – ident: 10.1016/j.ijimpeng.2012.03.009_bib15 – volume: 32 start-page: 157 issue: 1 year: 1984 ident: 10.1016/j.ijimpeng.2012.03.009_bib11 article-title: Analysis of the cup-cone fracture in a round tensile bar publication-title: Acta Metal doi: 10.1016/0001-6160(84)90213-X – volume: 26 start-page: 295 issue: 4 year: 1984 ident: 10.1016/j.ijimpeng.2012.03.009_bib40 article-title: Kinetic concept of the strength of solids publication-title: Int J Fract doi: 10.1007/BF00962961 – start-page: 155 year: 1998 ident: 10.1016/j.ijimpeng.2012.03.009_bib5 article-title: Mechanical properties and constitutive relations for molybdenum under high rate deformation, molybdenum and molybdenum alloys – volume: 107 start-page: 83 issue: 1 year: 1985 ident: 10.1016/j.ijimpeng.2012.03.009_bib13 article-title: Continuous damage mechanics model for ductile fracture publication-title: J Eng Mater Technol Trans ASME doi: 10.1115/1.3225775 – year: 1991 ident: 10.1016/j.ijimpeng.2012.03.009_bib7 – volume: 33 start-page: 3 issue: 1 year: 1987 ident: 10.1016/j.ijimpeng.2012.03.009_bib18 article-title: An anisotropic theory of elasticity for continuum damage mechanics publication-title: Int J Fract doi: 10.1007/BF00034895 |
| SSID | ssj0017050 |
| Score | 2.1310532 |
| Snippet | A physically based damage and failure model, applicable to orthotropic metals is proposed in this paper. To account for the physical mechanisms of failure, the... |
| SourceID | proquest pascalfrancis crossref elsevier |
| SourceType | Aggregation Database Index Database Enrichment Source Publisher |
| StartPage | 61 |
| SubjectTerms | Aluminium alloys Aluminum base alloys Constitutive relationships Damage Exact sciences and technology Failure Finite elements Fracture mechanics (crack, fatigue, damage...) Fundamental areas of phenomenology (including applications) Inelasticity (thermoplasticity, viscoplasticity...) Mathematical models Mathematics Meshless methods Methods of scientific computing (including symbolic computation, algebraic computation) Modelling Numerical analysis. Scientific computation Physics Sciences and techniques of general use Solid mechanics Strain rate Structural and continuum mechanics |
| Title | Modelling of dynamic damage and failure in aluminium alloys |
| URI | https://dx.doi.org/10.1016/j.ijimpeng.2012.03.009 https://www.proquest.com/docview/1082214046 |
| Volume | 49 |
| WOSCitedRecordID | wos000308623800006&url=https%3A%2F%2Fcvtisr.summon.serialssolutions.com%2F%23%21%2Fsearch%3Fho%3Df%26include.ft.matches%3Dt%26l%3Dnull%26q%3D |
| hasFullText | 1 |
| inHoldings | 1 |
| isFullTextHit | |
| isPrint | |
| journalDatabaseRights | – providerCode: PRVESC databaseName: Elsevier SD Freedom Collection Journals 2021 customDbUrl: eissn: 1879-3509 dateEnd: 99991231 omitProxy: false ssIdentifier: ssj0017050 issn: 0734-743X databaseCode: AIEXJ dateStart: 19950201 isFulltext: true titleUrlDefault: https://www.sciencedirect.com providerName: Elsevier |
| link | http://cvtisr.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwtV3di9QwEA_rng-KiJ-4fhwRfJOubZI2DT4dcqL3sBx6yr6VNEmPlrW73O4tJ_7zTpo02-OUU8SXsgTaZjPTmV8mM79B6FWpqTRMxFGsqYmYquJIyNxEaWrZzoXhLC-7ZhN8Nsvnc3E8Gv3oa2G2C962-cWFWP1XUcMYCNuWzv6FuMNDYQB-g9DhCmKH6x8J3nY3c0TbgAO1azj_WstvNjnHRskrWdtUdBvokGCZ6ra2-cmLxfL7eohUL4cKhwQTrq7S7IgMe6F9rU_bBhxt1zT90zRg5AY2uGF8FsaHxx5HYfRYtsttl307HUYkEuJL80KYrC-V2eUlWWvGKYsArsyd43HWNuciomkshubYMZh6e-qI2r1ndo1irth8F35opnUDCwB_3ubrEcdcK3ZeLuQefrYzsRNJSAeg-A20R3gq8jHaO_h4OD8Kh1A87hr8hpkPCsx__bbfYZs7K7mGL65yrVKueP0OypzcQ3f9HgQfON25j0amfYBuD5gpH6K3QYvwssJei7DTIgxahL0W4brFQYuw06JH6Mv7w5N3HyLfZyNSlKebiFe05EwKUQqW2HPUiplEMWFImSSclhlNNDemIpXSWlNWZgD8UqmZ5qXmgAcfo3G7bM0ThPOMUiXyDPyCYiU8l2pZVlpJaZSB3fgEpf0KFcqT0NteKIuizzZsin5lC7uyRUwLWNkJehPuWzkalmvvEL0ACg8mHUgsQG-uvXf_ksTCK0lG8pixdIJe9iIswBzbMzbZmuX52vLtEmIpq7Kn_zCBZ-jW7sN6jsabs3PzAt1U2029Ptv3evoTqka09Q |
| linkProvider | Elsevier |
| openUrl | ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Modelling+of+dynamic+damage+and+failure+in+aluminium+alloys&rft.jtitle=International+journal+of+impact+engineering&rft.au=Vignjevic%2C+R.&rft.au=Djordjevic%2C+N.&rft.au=Campbell%2C+J.&rft.au=Panov%2C+V.&rft.date=2012-11-01&rft.pub=Elsevier+Ltd&rft.issn=0734-743X&rft.eissn=1879-3509&rft.volume=49&rft.spage=61&rft.epage=76&rft_id=info:doi/10.1016%2Fj.ijimpeng.2012.03.009&rft.externalDocID=S0734743X12000747 |
| thumbnail_l | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=0734-743X&client=summon |
| thumbnail_m | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=0734-743X&client=summon |
| thumbnail_s | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=0734-743X&client=summon |