Experimental and numerical analysis of wrinkling during forming of multi-layered textile composites
Wrinkling is one of the main flaws that can appear during forming processes of textile composite reinforcements. When the forming is carried out on a multi-layered fabric the wrinkle development is strongly increased if the plies have different orientations. This phenomenon has been observed in prev...
Uloženo v:
| Vydáno v: | Composite structures Ročník 208; s. 213 - 223 |
|---|---|
| Hlavní autoři: | , , , |
| Médium: | Journal Article |
| Jazyk: | angličtina |
| Vydáno: |
Elsevier Ltd
15.01.2019
|
| Témata: | |
| ISSN: | 0263-8223, 1879-1085 |
| On-line přístup: | Získat plný text |
| Tagy: |
Přidat tag
Žádné tagy, Buďte první, kdo vytvoří štítek k tomuto záznamu!
|
| Abstract | Wrinkling is one of the main flaws that can appear during forming processes of textile composite reinforcements. When the forming is carried out on a multi-layered fabric the wrinkle development is strongly increased if the plies have different orientations. This phenomenon has been observed in previous experimental studies and is confirmed by a set of forming tests on multi-layered reinforcements. Beyond these experiments, a multilayered fabric forming process numerical simulation based on stress-resultant textile shell elements is presented. It is shown that this simulation is able to accurately describe multi-layered fabric forming processes and in particular the development of wrinkles. In the case of multi-layered reinforcements where the neighboring plies are oriented differently, the numerical simulations shows the development of zones where the fibers in one direction are subjected to compression which gives rise to wrinkles. The analysis of the forming for different friction coefficients confirms the major role of the friction between the plies in wrinkling. The influence of the pressure imposed by the blank holder has also been studied. |
|---|---|
| AbstractList | Wrinkling is one of the main flaws that can appear during forming processes of textile composite reinforcements. When the forming is carried out on a multi-layered fabric the wrinkle development is strongly increased if the plies have different orientations. This phenomenon has been observed in previous experimental studies and is confirmed by a set of forming tests on multi-layered reinforcements. Beyond these experiments, a multilayered fabric forming process numerical simulation based on stress-resultant textile shell elements is presented. It is shown that this simulation is able to accurately describe multi-layered fabric forming processes and in particular the development of wrinkles. In the case of multi-layered reinforcements where the neighboring plies are oriented differently, the numerical simulations shows the development of zones where the fibers in one direction are subjected to compression which gives rise to wrinkles. The analysis of the forming for different friction coefficients confirms the major role of the friction between the plies in wrinkling. The influence of the pressure imposed by the blank holder has also been studied. |
| Author | Guzman-Maldonado, E. Wang, P. Hamila, N. Boisse, P. |
| Author_xml | – sequence: 1 givenname: E. surname: Guzman-Maldonado fullname: Guzman-Maldonado, E. organization: Université de Lyon, LaMCoS, INSA Lyon, F-69621, France – sequence: 2 givenname: P. surname: Wang fullname: Wang, P. organization: Université de Lille, GEMTEX, ENSAIT Roubaix, F-59056, France – sequence: 3 givenname: N. surname: Hamila fullname: Hamila, N. organization: Université de Lyon, LaMCoS, INSA Lyon, F-69621, France – sequence: 4 givenname: P. surname: Boisse fullname: Boisse, P. email: philippe.boisse@insa-lyon.fr organization: Université de Lyon, LaMCoS, INSA Lyon, F-69621, France |
| BookMark | eNqNkMtOwzAQRS1UJNrCP_gHEuwkbewNElS8pEpsuo-mzgS5OHZlO9D-PQ5FQmIDq-N53fHcGZlYZ5EQylnOGV9e73Ll-n2IflAxLxgXKZ0nnJEpF7XMOBOLCZmyYllmoijKCzILYccYExXnU6LuD3v0ukcbwVCwLbVDnxLqKwJzDDpQ19EPr-2b0faVtoMf0Tnfj0y1fjBRZwaO6LGlEQ9RG6Tjt1zQEcMlOe_ABLz65pxsHu43q6ds_fL4vLpdZ6qspMg4QClRQiekqsdLEJgqMT1hyRaKbVlVi62oWV1VQmIhu7qCtu0AxYLJqpyTm5Os8i4Ej12jdISonY0etGk4a0bHml3z41gz7hkrCUlA_BLYJ2fAH_8zencaxXTfu0bfBKXRKmy1x9TbOv23yCdv_5JH |
| CitedBy_id | crossref_primary_10_1016_j_measurement_2024_115754 crossref_primary_10_1002_pc_28309 crossref_primary_10_1016_j_compositesb_2020_108462 crossref_primary_10_1016_j_compositesb_2021_108981 crossref_primary_10_1016_j_compstruct_2025_119356 crossref_primary_10_1007_s10443_025_10306_8 crossref_primary_10_1016_j_compstruct_2021_114816 crossref_primary_10_1007_s12289_020_01606_4 crossref_primary_10_1016_j_compositesa_2023_107458 crossref_primary_10_1016_j_ijfatigue_2021_106507 crossref_primary_10_3390_ma14030682 crossref_primary_10_1007_s00170_023_12730_1 crossref_primary_10_1016_j_compositesa_2025_109032 crossref_primary_10_1016_j_compstruct_2021_113844 crossref_primary_10_1016_j_compositesb_2021_109196 crossref_primary_10_1016_j_compstruct_2022_116401 crossref_primary_10_1002_pc_29790 crossref_primary_10_1016_j_compstruct_2021_115156 crossref_primary_10_1016_j_compstruct_2022_115995 crossref_primary_10_1177_07316844231197251 crossref_primary_10_1016_j_ijnonlinmec_2020_103589 crossref_primary_10_1016_j_compositesa_2021_106558 crossref_primary_10_1016_j_ijsolstr_2023_112150 crossref_primary_10_1016_j_tws_2024_112362 crossref_primary_10_3389_fmats_2023_1126933 crossref_primary_10_1016_j_compositesa_2025_108818 crossref_primary_10_1016_j_tws_2025_113052 crossref_primary_10_1002_pc_29118 crossref_primary_10_1016_j_matdes_2022_110682 crossref_primary_10_3389_fmats_2020_571779 crossref_primary_10_1088_1361_6501_accec0 crossref_primary_10_1002_pc_70353 crossref_primary_10_1016_j_matdes_2025_114418 crossref_primary_10_4028_p_165q46 crossref_primary_10_1016_j_compstruct_2019_03_080 crossref_primary_10_1016_j_compositesa_2021_106611 crossref_primary_10_1177_0021998320937066 crossref_primary_10_1016_j_coco_2020_100539 crossref_primary_10_1051_meca_2019016 crossref_primary_10_1007_s11740_023_01187_6 crossref_primary_10_1016_j_compositesb_2023_110536 crossref_primary_10_1016_j_coco_2022_101107 crossref_primary_10_1177_00405175211041720 crossref_primary_10_1016_j_tws_2025_113229 crossref_primary_10_3390_jmmp7010014 crossref_primary_10_1007_s00170_025_15351_y crossref_primary_10_1016_j_compositesb_2022_109777 crossref_primary_10_1016_j_compositesa_2024_108644 crossref_primary_10_1002_pc_26901 crossref_primary_10_1007_s40684_025_00700_9 crossref_primary_10_1016_j_cma_2023_116476 crossref_primary_10_4028_p_809h64 crossref_primary_10_3390_polym14132618 crossref_primary_10_1016_j_cja_2020_09_027 crossref_primary_10_1016_j_compositesa_2024_108240 crossref_primary_10_1016_j_compstruct_2024_118324 crossref_primary_10_1016_j_compositesa_2024_108683 crossref_primary_10_3390_jcs5030081 crossref_primary_10_1016_j_compstruct_2022_116586 crossref_primary_10_1016_j_ijsolstr_2021_03_001 crossref_primary_10_1016_j_jmapro_2022_11_049 crossref_primary_10_1007_s12221_023_00259_9 crossref_primary_10_1016_j_jmapro_2022_12_025 crossref_primary_10_1016_j_compositesa_2019_105604 crossref_primary_10_1002_pc_28837 crossref_primary_10_1016_j_compositesa_2021_106272 crossref_primary_10_1177_08927057221142222 crossref_primary_10_1016_j_compositesa_2023_107967 crossref_primary_10_1016_j_compositesb_2020_108357 crossref_primary_10_1007_s12289_022_01682_8 crossref_primary_10_1016_j_coco_2025_102555 crossref_primary_10_1016_j_compositesb_2024_111269 crossref_primary_10_1016_j_compositesb_2024_111268 crossref_primary_10_1016_j_compositesa_2020_106135 crossref_primary_10_1016_j_compstruct_2023_117738 crossref_primary_10_1177_1558925020958521 crossref_primary_10_1016_j_compositesa_2024_108431 crossref_primary_10_1016_j_compstruct_2020_111854 crossref_primary_10_1016_j_compositesb_2024_111549 crossref_primary_10_1177_0021998319846556 crossref_primary_10_3389_fmats_2022_825830 crossref_primary_10_1016_j_compositesa_2021_106308 crossref_primary_10_1016_j_matdes_2019_108388 crossref_primary_10_3390_polym13234088 crossref_primary_10_1016_j_compscitech_2020_108078 crossref_primary_10_1016_j_polymertesting_2023_107963 crossref_primary_10_1007_s13272_025_00880_9 |
| Cites_doi | 10.1016/j.compositesa.2017.06.006 10.1016/S1359-835X(96)00150-9 10.1007/s12289-016-1294-7 10.1016/0956-7143(95)95003-H 10.1016/j.compstruct.2017.11.033 10.1016/j.compositesa.2009.03.004 10.1016/S0924-0136(01)00987-6 10.1016/j.compositesa.2017.08.008 10.1016/j.compstruct.2017.01.030 10.1016/j.compositesa.2009.02.005 10.1016/j.compositesa.2017.10.008 10.1080/00405008908659185 10.1016/j.compstruct.2015.07.125 10.1007/s10443-016-9475-6 10.1016/j.compositesa.2012.08.005 10.1016/j.compositesa.2013.04.004 10.1016/j.compositesa.2006.03.006 10.1016/S1359-835X(00)00100-7 10.1103/PhysRevLett.90.074302 10.1016/j.compstruct.2015.06.056 10.1115/1.4039555 10.1002/(SICI)1097-0207(20000110/30)47:1/3<557::AID-NME784>3.0.CO;2-9 10.1016/j.compositesa.2015.11.005 10.1016/j.compositesa.2006.11.005 10.1016/j.compositesa.2013.03.013 10.1016/j.compositesa.2017.04.011 10.1016/j.compositesa.2015.08.025 10.1016/S0045-7949(00)00072-9 10.1016/0020-7403(86)90054-8 10.1111/str.12206 10.1016/j.compositesa.2014.08.020 10.1016/j.compositesa.2013.09.009 10.1016/S0263-8223(03)00057-6 10.1016/j.compositesb.2017.12.061 10.3390/ma10101184 10.1007/s12289-009-0646-y 10.1016/j.compositesa.2003.09.001 10.1016/j.compositesa.2013.03.002 10.1016/j.compstruct.2018.02.041 10.1016/j.compositesa.2012.03.012 10.1016/S0924-0136(97)00368-3 10.1016/0022-5096(58)90029-2 10.1016/j.compstruct.2011.04.030 10.1016/0020-7403(94)90056-6 10.1016/j.compositesa.2015.10.012 10.1016/j.compscitech.2006.09.009 10.1016/j.compositesa.2016.09.016 10.1007/s12289-008-0002-7 10.1016/j.compscitech.2014.10.007 10.1016/j.compositesa.2004.12.001 10.1016/j.compositesb.2013.03.045 10.1016/j.jmatprotec.2007.11.239 10.1016/j.compositesa.2015.07.011 10.1016/j.compscitech.2007.03.040 10.1002/nme.2625 10.1016/S0020-7683(96)00008-X 10.1002/pc.10655 10.1007/s12289-010-0865-2 10.1016/S1359-835X(97)00060-2 10.1177/004051759006001103 10.1016/j.compositesa.2014.10.017 10.1016/j.compositesa.2016.02.023 10.1177/0021998308098237 10.1016/j.compscitech.2011.01.011 10.1016/j.compositesa.2013.07.010 10.1115/1.3167186 |
| ContentType | Journal Article |
| Copyright | 2018 Elsevier Ltd |
| Copyright_xml | – notice: 2018 Elsevier Ltd |
| DBID | AAYXX CITATION |
| DOI | 10.1016/j.compstruct.2018.10.018 |
| DatabaseName | CrossRef |
| DatabaseTitle | CrossRef |
| DatabaseTitleList | |
| DeliveryMethod | fulltext_linktorsrc |
| Discipline | Engineering |
| EISSN | 1879-1085 |
| EndPage | 223 |
| ExternalDocumentID | 10_1016_j_compstruct_2018_10_018 S0263822318314326 |
| GroupedDBID | --K --M .~1 0R~ 1B1 1~. 1~5 4.4 457 4G. 5GY 5VS 6TJ 7-5 71M 8P~ 9JN AABNK AABXZ AACTN AAEDT AAEDW AAEPC AAIAV AAIKJ AAKOC AALRI AAOAW AAQFI AAXUO ABMAC ABXRA ABYKQ ACDAQ ACGFS ACRLP ADBBV ADEZE ADTZH AEBSH AECPX AEKER AENEX AEZYN AFKWA AFRZQ AFTJW AGHFR AGUBO AGYEJ AHHHB AHJVU AIEXJ AIKHN AITUG AJOXV ALMA_UNASSIGNED_HOLDINGS AMFUW AMRAJ AXJTR BJAXD BKOJK BLXMC CS3 DU5 EBS EFJIC EFLBG EJD EO8 EO9 EP2 EP3 FDB FIRID FNPLU FYGXN G-Q GBLVA IHE J1W JJJVA KOM LY7 M24 M41 MAGPM MO0 N9A O-L O9- OAUVE OZT P-8 P-9 P2P PC. Q38 RIG RNS ROL RPZ SDF SDG SES SPC SPCBC SSM SST SSZ T5K XPP ZMT ~02 ~G- 29F 9DU AAQXK AATTM AAXKI AAYWO AAYXX ABFNM ABJNI ABWVN ABXDB ACLOT ACNNM ACRPL ACVFH ADCNI ADIYS ADMUD ADNMO AEIPS AEUPX AFJKZ AFPUW AGQPQ AIGII AIIUN AKBMS AKRWK AKYEP ANKPU APXCP ASPBG AVWKF AZFZN CITATION EFKBS FEDTE FGOYB G-2 HVGLF HZ~ R2- SET SEW SMS WUQ ~HD |
| ID | FETCH-LOGICAL-c3498-1aa39e9af89c72018ea0c3e720a605c0b0478b87074489e29f74addfae850943 |
| ISSN | 0263-8223 |
| IngestDate | Sat Nov 29 07:22:33 EST 2025 Tue Nov 18 22:16:23 EST 2025 Fri Feb 23 02:48:14 EST 2024 |
| IsDoiOpenAccess | false |
| IsOpenAccess | true |
| IsPeerReviewed | true |
| IsScholarly | true |
| Keywords | Wrinkling Composite reinforcements Multi-layer forming Friction Fabrics/textiles Computational modelling |
| Language | English |
| LinkModel | OpenURL |
| MergedId | FETCHMERGED-LOGICAL-c3498-1aa39e9af89c72018ea0c3e720a605c0b0478b87074489e29f74addfae850943 |
| OpenAccessLink | https://hal.science/hal-04661599 |
| PageCount | 11 |
| ParticipantIDs | crossref_citationtrail_10_1016_j_compstruct_2018_10_018 crossref_primary_10_1016_j_compstruct_2018_10_018 elsevier_sciencedirect_doi_10_1016_j_compstruct_2018_10_018 |
| PublicationCentury | 2000 |
| PublicationDate | 2019-01-15 |
| PublicationDateYYYYMMDD | 2019-01-15 |
| PublicationDate_xml | – month: 01 year: 2019 text: 2019-01-15 day: 15 |
| PublicationDecade | 2010 |
| PublicationTitle | Composite structures |
| PublicationYear | 2019 |
| Publisher | Elsevier Ltd |
| Publisher_xml | – name: Elsevier Ltd |
| References | Clapp, Peng (b0040) 1990; 60 Ouagne, Soulat, Tephany, Gillibert (b0280) 2016; 52 Leutz, Vermilyea, Bel, Hinterhölzl (b0190) 2016; 23 Kärger, Galkin, Zimmerling, Dörr, Linden, Oeckerath (b0295) 2018; 192 Gutowski, Dillon, Chey, Li (b0045) 1995; 6 Lightfoot, Wisnom, Potter (b0160) 2013; 51 Lebrun, Bureau, Denault (b0060) 2003; 61 Rozant, Bourban, Månson (b0055) 2000; 31 Skordos, Aceves, Sutcliffe (b0130) 2007; 38 Boisse, Colmars, Hamila, Naouar, Steer (b0290) 2018; 141 Bel, Hamila, Boisse, Dumont (b0310) 2012; 43 Jauffrès, Sherwood, Morris, Chen (b0135) 2010; 3 Hallander, Sjölander, Åkermo (b0180) 2015; 78 Dodwell, Butler, Hunt (b0170) 2014; 105 Lightfoot, Wisnom, Potter (b0155) 2013; 49 Gorczyca-Cole, Sherwood, Chen (b0315) 2007; 38 Haanappel, Ten Thije, Sachs, Rietman, Akkerman (b0175) 2014; 56 Syerko, Comas-Cardona, Binetruy (b0270) 2012; 43 Wang, Kinzel, Altan (b0010) 1994; 36 Wang, Hamila, Boisse (b0320) 2013; 52 Hill (b0005) 1958; 6 Harrison (b0145) 2016; 81 Boisse, Hamila, Helenon, Hagège, Cao (b0265) 2008; 1 Hamila, Boisse, Sabourin, Brunet (b0260) 2009; 79 Boisse, Hamila, Vidal-Sallé, Dumont (b0115) 2011; 71 Chen, McGregor, Harper, Endruweit, Warrior (b0185) 2016; 91 Amirbayat, Hearle (b0035) 1989; 80 Farnand, Zobeiry, Poursartip, Fernlund (b0200) 2017; 103 Cherouat, Billoët (b0125) 2001; 118 Hallander, Akermo, Mattei, Petersson, Nyman (b0165) 2013; 50 Dangora, Mitchell, Sherwood (b0140) 2015; 78 Vanclooster K, Lomov SV, Verpoest I. On the formability of multi-layered fabric composites, In: ICCM—17th International Conference on Composite Materials. Edinburgh, UK; 2009. Onate, Zarate (b0300) 2000; 47 ten Thije, Akkerman (b0220) 2009; 40 Hughes, Belytschko (b0250) 1983; 50 Obermeyer, Majlessi (b0330) 1998; 75 Prodromou, Chen (b0050) 1997; 28A Sjölander, Hallander, Åkermo (b0195) 2016; 81 Allaoui, Cellard, Hivet (b0240) 2015; 68 Friedl, Rammerstorfer, Fischer (b0020) 2000; 78 Gatouillat, Bareggi, Vidal-Sallé, Boisse (b0100) 2013; 54 Lin, Wang, Long, Clifford, Harrison (b0340) 2007; 67 Marjanović, Vuksanović (b0305) 2016; 156 Breuer, Neitzel, Ketzer, Reinicke (b0325) 1996; 17 Amirbayat, Hearle (b0030) 1986; 28 De Luca, Lefébure, Pickett (b0235) 1998; 29 Boisse, Hamila, Guzman-Maldonado, Madeo, Hivet, Dell’Isola (b0120) 2017; 10 Cao, Boyce (b0015) 1997; 34 Belnoue, Mesogitis, Nixon-Pearson, Kratz, Ivanov, Partridge (b0205) 2017; 102 Vanclooster, Lomov, Verpoest (b0230) 2010; 3 Michaud (b0085) 2012 Beakou, Cano, Le Cam, Verney (b0150) 2011; 93 Hosseini, Kashani, Sassani, Milani, Ko (b0095) 2017; 10 Crisfield, Remmers, Verhoosel (b0255) 2012 Nezami, Gereke, Cherif (b0350) 2017; 99 Hancock, Potter (b0070) 2005; 36 Vanclooster, Lomov, Verpoest (b0080) 2009; 40 Sharma, Sutcliffe, Chang (b0065) 2003; 34 Alsayednoor, Lennard, Yu, Harrison (b0105) 2017; 101 Zhu, Yu, Teng, Tao (b0075) 2009; 43 Nezami, Gereke, Cherif (b0245) 2016; 84 Alshahrani, Hojjati (b0285) 2017; 166 Khan, Reynolds, Williams, Kendall (b0090) 2015; 131 Lee, Hong, Yu, Kang (b0335) 2007; 67 Belnoue, Nixon-Pearson, Thompson, Ivanov, Potter, Hallett (b0210) 2018; 140 Cerda, Mahadevan (b0025) 2003; 90 Shanwan, Allaoui (b0345) 2018; 1–10 Liang, Hamila, Peillon, Boisse (b0275) 2014; 67 Hosseini, Kashani, Sassani, Milani, Ko (b0110) 2018; 185 Sadighi, Rabizadeh, Kermansaravi (b0215) 2008; 201 Boisse (10.1016/j.compstruct.2018.10.018_b0290) 2018; 141 Sharma (10.1016/j.compstruct.2018.10.018_b0065) 2003; 34 Lin (10.1016/j.compstruct.2018.10.018_b0340) 2007; 67 Hosseini (10.1016/j.compstruct.2018.10.018_b0110) 2018; 185 Liang (10.1016/j.compstruct.2018.10.018_b0275) 2014; 67 Amirbayat (10.1016/j.compstruct.2018.10.018_b0035) 1989; 80 Farnand (10.1016/j.compstruct.2018.10.018_b0200) 2017; 103 Kärger (10.1016/j.compstruct.2018.10.018_b0295) 2018; 192 Belnoue (10.1016/j.compstruct.2018.10.018_b0205) 2017; 102 Vanclooster (10.1016/j.compstruct.2018.10.018_b0230) 2010; 3 Marjanović (10.1016/j.compstruct.2018.10.018_b0305) 2016; 156 Boisse (10.1016/j.compstruct.2018.10.018_b0120) 2017; 10 Clapp (10.1016/j.compstruct.2018.10.018_b0040) 1990; 60 Hallander (10.1016/j.compstruct.2018.10.018_b0180) 2015; 78 Sjölander (10.1016/j.compstruct.2018.10.018_b0195) 2016; 81 10.1016/j.compstruct.2018.10.018_b0225 Syerko (10.1016/j.compstruct.2018.10.018_b0270) 2012; 43 Hughes (10.1016/j.compstruct.2018.10.018_b0250) 1983; 50 Gorczyca-Cole (10.1016/j.compstruct.2018.10.018_b0315) 2007; 38 Michaud (10.1016/j.compstruct.2018.10.018_b0085) 2012 Sadighi (10.1016/j.compstruct.2018.10.018_b0215) 2008; 201 Lee (10.1016/j.compstruct.2018.10.018_b0335) 2007; 67 Alsayednoor (10.1016/j.compstruct.2018.10.018_b0105) 2017; 101 Hallander (10.1016/j.compstruct.2018.10.018_b0165) 2013; 50 Gutowski (10.1016/j.compstruct.2018.10.018_b0045) 1995; 6 Cherouat (10.1016/j.compstruct.2018.10.018_b0125) 2001; 118 Bel (10.1016/j.compstruct.2018.10.018_b0310) 2012; 43 Cao (10.1016/j.compstruct.2018.10.018_b0015) 1997; 34 Crisfield (10.1016/j.compstruct.2018.10.018_b0255) 2012 Belnoue (10.1016/j.compstruct.2018.10.018_b0210) 2018; 140 Rozant (10.1016/j.compstruct.2018.10.018_b0055) 2000; 31 De Luca (10.1016/j.compstruct.2018.10.018_b0235) 1998; 29 Cerda (10.1016/j.compstruct.2018.10.018_b0025) 2003; 90 Lightfoot (10.1016/j.compstruct.2018.10.018_b0155) 2013; 49 Dodwell (10.1016/j.compstruct.2018.10.018_b0170) 2014; 105 Ouagne (10.1016/j.compstruct.2018.10.018_b0280) 2016; 52 Obermeyer (10.1016/j.compstruct.2018.10.018_b0330) 1998; 75 Prodromou (10.1016/j.compstruct.2018.10.018_b0050) 1997; 28A Boisse (10.1016/j.compstruct.2018.10.018_b0115) 2011; 71 Alshahrani (10.1016/j.compstruct.2018.10.018_b0285) 2017; 166 Khan (10.1016/j.compstruct.2018.10.018_b0090) 2015; 131 Dangora (10.1016/j.compstruct.2018.10.018_b0140) 2015; 78 Hancock (10.1016/j.compstruct.2018.10.018_b0070) 2005; 36 Nezami (10.1016/j.compstruct.2018.10.018_b0245) 2016; 84 Haanappel (10.1016/j.compstruct.2018.10.018_b0175) 2014; 56 Amirbayat (10.1016/j.compstruct.2018.10.018_b0030) 1986; 28 Hamila (10.1016/j.compstruct.2018.10.018_b0260) 2009; 79 Gatouillat (10.1016/j.compstruct.2018.10.018_b0100) 2013; 54 Zhu (10.1016/j.compstruct.2018.10.018_b0075) 2009; 43 Lightfoot (10.1016/j.compstruct.2018.10.018_b0160) 2013; 51 Wang (10.1016/j.compstruct.2018.10.018_b0010) 1994; 36 Nezami (10.1016/j.compstruct.2018.10.018_b0350) 2017; 99 Hosseini (10.1016/j.compstruct.2018.10.018_b0095) 2017; 10 Jauffrès (10.1016/j.compstruct.2018.10.018_b0135) 2010; 3 Boisse (10.1016/j.compstruct.2018.10.018_b0265) 2008; 1 Hill (10.1016/j.compstruct.2018.10.018_b0005) 1958; 6 Wang (10.1016/j.compstruct.2018.10.018_b0320) 2013; 52 Vanclooster (10.1016/j.compstruct.2018.10.018_b0080) 2009; 40 ten Thije (10.1016/j.compstruct.2018.10.018_b0220) 2009; 40 Harrison (10.1016/j.compstruct.2018.10.018_b0145) 2016; 81 Chen (10.1016/j.compstruct.2018.10.018_b0185) 2016; 91 Shanwan (10.1016/j.compstruct.2018.10.018_b0345) 2018; 1–10 Lebrun (10.1016/j.compstruct.2018.10.018_b0060) 2003; 61 Beakou (10.1016/j.compstruct.2018.10.018_b0150) 2011; 93 Onate (10.1016/j.compstruct.2018.10.018_b0300) 2000; 47 Leutz (10.1016/j.compstruct.2018.10.018_b0190) 2016; 23 Friedl (10.1016/j.compstruct.2018.10.018_b0020) 2000; 78 Breuer (10.1016/j.compstruct.2018.10.018_b0325) 1996; 17 Skordos (10.1016/j.compstruct.2018.10.018_b0130) 2007; 38 Allaoui (10.1016/j.compstruct.2018.10.018_b0240) 2015; 68 |
| References_xml | – volume: 43 start-page: 125 year: 2009 end-page: 138 ident: b0075 article-title: Theoretical modeling of large shear deformation and wrinkling of plain woven composite publication-title: J Compos Mater – volume: 43 start-page: 1365 year: 2012 end-page: 1388 ident: b0270 article-title: Models of mechanical properties/behavior of dry fibrous materials at various scales in bending and tension: a review publication-title: Compos A Appl Sci Manuf – volume: 49 start-page: 139 year: 2013 end-page: 147 ident: b0155 article-title: A new mechanism for the formation of ply wrinkles due to shear between plies publication-title: Compos A Appl Sci Manuf – volume: 60 start-page: 641 year: 1990 end-page: 645 ident: b0040 article-title: Buckling of woven fabrics.3. experimental validation of theoretical models publication-title: Text Res J – volume: 43 start-page: 2269 year: 2012 end-page: 2277 ident: b0310 article-title: Finite element model for NCF composite reinforcement preforming: Importance of inter-ply sliding publication-title: Compos A Appl Sci Manuf – volume: 3 start-page: 1205 year: 2010 end-page: 1216 ident: b0135 article-title: Discrete mesoscopic modeling for the simulation of woven-fabric reinforcement forming publication-title: Int J Mater Form – volume: 90 year: 2003 ident: b0025 article-title: Geometry and Physics of Wrinkling publication-title: Phys Rev Lett – volume: 38 start-page: 1318 year: 2007 end-page: 1330 ident: b0130 article-title: A simplified rate dependent model of forming and wrinkling of pre-impregnated woven composites publication-title: Compos A Appl Sci Manuf – volume: 17 start-page: 643 year: 1996 end-page: 647 ident: b0325 article-title: Deep drawing of fabric-reinforced thermoplastics: wrinkle formation and their reduction publication-title: Polym Compos – volume: 80 start-page: 51 year: 1989 end-page: 70 ident: b0035 article-title: The anatomy of buckling of textile fabrics: drape and conformability publication-title: J Text Inst – volume: 81 start-page: 41 year: 2016 end-page: 51 ident: b0195 article-title: Forming induced wrinkling of composite laminates: a numerical study on wrinkling mechanisms publication-title: Compos A Appl Sci Manuf – reference: Vanclooster K, Lomov SV, Verpoest I. On the formability of multi-layered fabric composites, In: ICCM—17th International Conference on Composite Materials. Edinburgh, UK; 2009. – volume: 1 start-page: 21 year: 2008 end-page: 29 ident: b0265 article-title: Different approaches for woven composite reinforcement forming simulation publication-title: Int J Mater Form – volume: 166 start-page: 136 year: 2017 end-page: 145 ident: b0285 article-title: A theoretical model with experimental verification for bending stiffness of thermosetting prepreg during forming process publication-title: Compos Struct – volume: 51 start-page: 99 year: 2013 end-page: 107 ident: b0160 article-title: Defects in woven preforms: Formation mechanisms and the effects of laminate design and layup protocol publication-title: Compos A Appl Sci Manuf – volume: 185 start-page: 764 year: 2018 end-page: 773 ident: b0110 article-title: Identifying the distinct shear wrinkling behavior of woven composite preforms under bias extension and picture frame tests publication-title: Compos Struct – volume: 6 start-page: 123 year: 1995 end-page: 134 ident: b0045 article-title: Laminate wrinkling scaling laws for ideal composites publication-title: Compos Manuf – year: 2012 ident: b0255 article-title: Nonlinear Finite Element Analysis of Solids and Structures – volume: 67 start-page: 357 year: 2007 end-page: 366 ident: b0335 article-title: The effect of blank holder force on the stamp forming behavior of non-crimp fabric with a chain stitch publication-title: Compos Sci Technol – volume: 91 start-page: 156 year: 2016 end-page: 167 ident: b0185 article-title: Defect formation during preforming of a bi-axial non-crimp fabric with a pillar stitch pattern publication-title: Compos A Appl Sci Manuf – volume: 141 start-page: 234 year: 2018 end-page: 249 ident: b0290 article-title: Bending and wrinkling of composite fiber preforms and prepregs. a review and new developments in the draping simulations publication-title: Compos B Eng – volume: 47 start-page: 557 year: 2000 end-page: 603 ident: b0300 article-title: Rotation-free triangular plate and shell elements publication-title: Int J Numer Meth Eng – volume: 81 start-page: 145 year: 2016 end-page: 157 ident: b0145 article-title: Modelling the forming mechanics of engineering fabrics using a mutually constrained pantographic beam and membrane mesh publication-title: Compos A Appl Sci Manuf – volume: 67 start-page: 3242 year: 2007 end-page: 3252 ident: b0340 article-title: Predictive modelling for optimization of textile composite forming publication-title: Compos Sci Technol – volume: 56 start-page: 80 year: 2014 end-page: 92 ident: b0175 article-title: Formability analyses of uni-directional and textile reinforced thermoplastics publication-title: Compos A Appl Sci Manuf – volume: 102 start-page: 196 year: 2017 end-page: 206 ident: b0205 article-title: Understanding and predicting defect formation in automated fibre placement pre-preg laminates publication-title: Compos A Appl Sci Manuf – volume: 192 start-page: 143 year: 2018 end-page: 152 ident: b0295 article-title: Forming optimisation embedded in a CAE chain to assess and enhance the structural performance of composite components publication-title: Compos Struct – volume: 131 start-page: 917 year: 2015 end-page: 926 ident: b0090 article-title: Processing of thermoset prepregs for high-volume applications and their numerical analysis using superimposed finite elements publication-title: Compos Struct – volume: 78 start-page: 234 year: 2015 end-page: 245 ident: b0180 article-title: Forming induced wrinkling of composite laminates with mixed ply material properties; an experimental study publication-title: Compos A Appl Sci Manuf – volume: 101 start-page: 81 year: 2017 end-page: 97 ident: b0105 article-title: Influence of specimen pre-shear and wrinkling on the accuracy of uniaxial bias extension test results publication-title: Compos A Appl Sci Manuf – volume: 79 start-page: 1443 year: 2009 end-page: 1466 ident: b0260 article-title: A semi-discrete shell finite element for textile composite reinforcement forming simulation publication-title: Int J Numer Meth Eng – volume: 36 start-page: 947 year: 2005 end-page: 953 ident: b0070 article-title: Inverse drape modelling—an investigation of the set of shapes that can be formed from continuous aligned woven fibre reinforcements publication-title: Compos A Appl Sci Manuf – volume: 52 start-page: 127 year: 2013 end-page: 136 ident: b0320 article-title: Thermoforming simulation of multilayer composites with continuous fibres and thermoplastic matrix publication-title: Compos B Eng – volume: 105 start-page: 151 year: 2014 end-page: 159 ident: b0170 article-title: Out-of-plane ply wrinkling defects during consolidation over an external radius publication-title: Compos Sci Technol – volume: 6 start-page: 236 year: 1958 end-page: 249 ident: b0005 article-title: A general theory of uniqueness and stability in elastic-plastic solids publication-title: J Mech Phys Solids – volume: 78 start-page: 185 year: 2000 end-page: 190 ident: b0020 article-title: Buckling of stretched strips publication-title: Comput Struct – volume: 38 start-page: 393 year: 2007 end-page: 406 ident: b0315 article-title: A friction model for thermostamping commingled glass–polypropylene woven fabrics publication-title: Compos A Appl Sci Manuf – volume: 10 start-page: 473 year: 2017 end-page: 492 ident: b0120 article-title: The bias-extension test for the analysis of in-plane shear properties of textile composite reinforcements and prepregs: a review publication-title: Int J Mater Form – volume: 93 start-page: 2628 year: 2011 end-page: 2635 ident: b0150 article-title: Modelling slit tape buckling during automated prepreg manufacturing: a local approach publication-title: Compos Struct – volume: 103 start-page: 168 year: 2017 end-page: 177 ident: b0200 article-title: Micro-level mechanisms of fiber waviness and wrinkling during hot drape forming of unidirectional prepreg composites publication-title: Compos A Appl Sci Manuf – volume: 29 start-page: 101 year: 1998 end-page: 110 ident: b0235 article-title: Numerical and experimental investigation of some press forming parameters of two fibre reinforced thermoplastics: Apc2-as4 and pei-cetex publication-title: Compos A Appl Sci Manuf – volume: 61 start-page: 341 year: 2003 end-page: 352 ident: b0060 article-title: Evaluation of bias-extension and picture-frame test methods for the measurement of intraply shear properties of PP/glass commingled fabrics publication-title: Compos Struct – volume: 40 start-page: 530 year: 2009 end-page: 539 ident: b0080 article-title: Experimental validation of forming simulations of fabric reinforced polymers using an unsymmetrical mould configuration publication-title: Compos A Appl Sci Manuf – volume: 50 start-page: 54 year: 2013 end-page: 64 ident: b0165 article-title: An experimental study of mechanisms behind wrinkle development during forming of composite laminates publication-title: Compos A Appl Sci Manuf – volume: 201 start-page: 725 year: 2008 end-page: 730 ident: b0215 article-title: Effects of laminate sequencing on thermoforming of thermoplastic matrix composites publication-title: J Mater Process Technol – volume: 34 start-page: 153 year: 1997 end-page: 176 ident: b0015 article-title: Wrinkling behavior of rectangular plates under lateral constraint publication-title: Int J Solids Struct – volume: 34 start-page: 1167 year: 2003 end-page: 1175 ident: b0065 article-title: Characterisation of material properties for draping of dry woven composite material publication-title: Compos A Appl Sci Manuf – volume: 3 start-page: 695 year: 2010 end-page: 698 ident: b0230 article-title: Simulation of multi-layered composites forming publication-title: Int J Mater Form – volume: 40 start-page: 739 year: 2009 end-page: 753 ident: b0220 article-title: A multi-layer triangular membrane finite element for the forming simulation of laminated composites publication-title: Compos A Appl Sci Manuf – volume: 67 start-page: 111 year: 2014 end-page: 122 ident: b0275 article-title: Analysis of thermoplastic prepreg bending stiffness during manufacturing and of its influence on wrinkling simulations publication-title: Compos A Appl Sci Manuf – volume: 156 start-page: 320 year: 2016 end-page: 332 ident: b0305 article-title: Free vibrations of laminated composite shells using the rotation-free plate elements based on Reddy’s layerwise discontinuous displacement model publication-title: Compos Struct – volume: 140 year: 2018 ident: b0210 article-title: Consolidation-driven defect generation in thick composite parts publication-title: J Manuf Sci Eng – volume: 28A start-page: 491 year: 1997 end-page: 503 ident: b0050 article-title: On the relationship between shear angle and wrinkling of textile composite preforms publication-title: Compos A – volume: 84 start-page: 406 year: 2016 end-page: 416 ident: b0245 article-title: Analyses of interaction mechanisms during forming of multilayer carbon woven fabrics for composite applications publication-title: Compos A Appl Sci Manuf – volume: 10 year: 2017 ident: b0095 article-title: A mesoscopic analytical model to predict the onset of wrinkling in plain woven preforms under bias extension shear deformation publication-title: Materials (Basel) – volume: 75 start-page: 222 year: 1998 end-page: 234 ident: b0330 article-title: A review of recent advances in the application of blank-holder force towards improving the forming limits of sheet metal parts publication-title: J Mater Process Technol – volume: 54 start-page: 135 year: 2013 end-page: 144 ident: b0100 article-title: Meso modelling for composite preform shaping–simulation of the loss of cohesion of the woven fibre network publication-title: Compos A Appl Sci Manuf – volume: 23 start-page: 583 year: 2016 end-page: 600 ident: b0190 article-title: Forming simulation of thick AFP laminates and comparison with live CT imaging publication-title: Appl Compos Mater – volume: 28 start-page: 339 year: 1986 end-page: 358 ident: b0030 article-title: The complex buckling of flexible sheet materials—part I. theoretical approach publication-title: Int J Mech Sci – year: 2012 ident: b0085 publication-title: Fibrous Preforms and Preforming, Wiley Encyclopedia of Composites – volume: 71 start-page: 683 year: 2011 end-page: 692 ident: b0115 article-title: Simulation of wrinkling during textile composite reinforcement forming. influence of tensile, in-plane shear and bending stiffnesses publication-title: Compos Sci Technol – volume: 1–10 year: 2018 ident: b0345 article-title: Different experimental ways to minimize the preforming defects of multi-layered interlock dry fabric publication-title: Int J Mater Form – volume: 78 start-page: 102 year: 2015 end-page: 112 ident: b0140 article-title: Predictive model for the detection of out-of-plane defects formed during textile-composite manufacture publication-title: Compos A Appl Sci Manuf – volume: 118 start-page: 460 year: 2001 end-page: 471 ident: b0125 article-title: Mechanical and numerical modelling of composite manufacturing processes deep-drawing and laying-up of thin pre-impregnated woven fabrics publication-title: J Mater Process Technol – volume: 99 start-page: 94 year: 2017 end-page: 101 ident: b0350 article-title: Active forming manipulation of composite reinforcements for the suppression of forming defects publication-title: Compos A Appl Sci Manuf – volume: 31 start-page: 1167 year: 2000 end-page: 1177 ident: b0055 article-title: Drapability of dry textile fabrics for stampable thermoplastic preforms publication-title: Compos A Appl Sci Manuf – volume: 68 start-page: 336 year: 2015 end-page: 345 ident: b0240 article-title: Effect of inter-ply sliding on the quality of multilayer interlock dry fabric preforms publication-title: Compos A Appl Sci Manuf – volume: 50 start-page: 1033 year: 1983 end-page: 1041 ident: b0250 article-title: A precis of developments in computational methods for transient analysis publication-title: J Appl Mech – volume: 36 start-page: 945 year: 1994 end-page: 960 ident: b0010 article-title: Wrinkling criterion for an anisotropic shell with compound curvatures in sheet forming publication-title: Int J Mech Sci – volume: 52 start-page: 559 year: 2016 end-page: 569 ident: b0280 article-title: Measurement of the appearance and growth of tow buckling defect in the frame of complex shape manufacturing process by using fringe projection technique publication-title: Strain – volume: 101 start-page: 81 year: 2017 ident: 10.1016/j.compstruct.2018.10.018_b0105 article-title: Influence of specimen pre-shear and wrinkling on the accuracy of uniaxial bias extension test results publication-title: Compos A Appl Sci Manuf doi: 10.1016/j.compositesa.2017.06.006 – volume: 28A start-page: 491 year: 1997 ident: 10.1016/j.compstruct.2018.10.018_b0050 article-title: On the relationship between shear angle and wrinkling of textile composite preforms publication-title: Compos A doi: 10.1016/S1359-835X(96)00150-9 – volume: 10 start-page: 473 issue: 4 year: 2017 ident: 10.1016/j.compstruct.2018.10.018_b0120 article-title: The bias-extension test for the analysis of in-plane shear properties of textile composite reinforcements and prepregs: a review publication-title: Int J Mater Form doi: 10.1007/s12289-016-1294-7 – volume: 6 start-page: 123 issue: 3–4 year: 1995 ident: 10.1016/j.compstruct.2018.10.018_b0045 article-title: Laminate wrinkling scaling laws for ideal composites publication-title: Compos Manuf doi: 10.1016/0956-7143(95)95003-H – volume: 185 start-page: 764 year: 2018 ident: 10.1016/j.compstruct.2018.10.018_b0110 article-title: Identifying the distinct shear wrinkling behavior of woven composite preforms under bias extension and picture frame tests publication-title: Compos Struct doi: 10.1016/j.compstruct.2017.11.033 – volume: 40 start-page: 739 year: 2009 ident: 10.1016/j.compstruct.2018.10.018_b0220 article-title: A multi-layer triangular membrane finite element for the forming simulation of laminated composites publication-title: Compos A Appl Sci Manuf doi: 10.1016/j.compositesa.2009.03.004 – volume: 118 start-page: 460 year: 2001 ident: 10.1016/j.compstruct.2018.10.018_b0125 article-title: Mechanical and numerical modelling of composite manufacturing processes deep-drawing and laying-up of thin pre-impregnated woven fabrics publication-title: J Mater Process Technol doi: 10.1016/S0924-0136(01)00987-6 – volume: 102 start-page: 196 year: 2017 ident: 10.1016/j.compstruct.2018.10.018_b0205 article-title: Understanding and predicting defect formation in automated fibre placement pre-preg laminates publication-title: Compos A Appl Sci Manuf doi: 10.1016/j.compositesa.2017.08.008 – ident: 10.1016/j.compstruct.2018.10.018_b0225 – volume: 166 start-page: 136 year: 2017 ident: 10.1016/j.compstruct.2018.10.018_b0285 article-title: A theoretical model with experimental verification for bending stiffness of thermosetting prepreg during forming process publication-title: Compos Struct doi: 10.1016/j.compstruct.2017.01.030 – volume: 40 start-page: 530 issue: 4 year: 2009 ident: 10.1016/j.compstruct.2018.10.018_b0080 article-title: Experimental validation of forming simulations of fabric reinforced polymers using an unsymmetrical mould configuration publication-title: Compos A Appl Sci Manuf doi: 10.1016/j.compositesa.2009.02.005 – year: 2012 ident: 10.1016/j.compstruct.2018.10.018_b0085 – volume: 103 start-page: 168 year: 2017 ident: 10.1016/j.compstruct.2018.10.018_b0200 article-title: Micro-level mechanisms of fiber waviness and wrinkling during hot drape forming of unidirectional prepreg composites publication-title: Compos A Appl Sci Manuf doi: 10.1016/j.compositesa.2017.10.008 – volume: 80 start-page: 51 issue: 1 year: 1989 ident: 10.1016/j.compstruct.2018.10.018_b0035 article-title: The anatomy of buckling of textile fabrics: drape and conformability publication-title: J Text Inst doi: 10.1080/00405008908659185 – volume: 156 start-page: 320 year: 2016 ident: 10.1016/j.compstruct.2018.10.018_b0305 article-title: Free vibrations of laminated composite shells using the rotation-free plate elements based on Reddy’s layerwise discontinuous displacement model publication-title: Compos Struct doi: 10.1016/j.compstruct.2015.07.125 – volume: 23 start-page: 583 year: 2016 ident: 10.1016/j.compstruct.2018.10.018_b0190 article-title: Forming simulation of thick AFP laminates and comparison with live CT imaging publication-title: Appl Compos Mater doi: 10.1007/s10443-016-9475-6 – volume: 43 start-page: 2269 issue: 12 year: 2012 ident: 10.1016/j.compstruct.2018.10.018_b0310 article-title: Finite element model for NCF composite reinforcement preforming: Importance of inter-ply sliding publication-title: Compos A Appl Sci Manuf doi: 10.1016/j.compositesa.2012.08.005 – volume: 51 start-page: 99 year: 2013 ident: 10.1016/j.compstruct.2018.10.018_b0160 article-title: Defects in woven preforms: Formation mechanisms and the effects of laminate design and layup protocol publication-title: Compos A Appl Sci Manuf doi: 10.1016/j.compositesa.2013.04.004 – volume: 38 start-page: 393 issue: 2 year: 2007 ident: 10.1016/j.compstruct.2018.10.018_b0315 article-title: A friction model for thermostamping commingled glass–polypropylene woven fabrics publication-title: Compos A Appl Sci Manuf doi: 10.1016/j.compositesa.2006.03.006 – volume: 31 start-page: 1167 year: 2000 ident: 10.1016/j.compstruct.2018.10.018_b0055 article-title: Drapability of dry textile fabrics for stampable thermoplastic preforms publication-title: Compos A Appl Sci Manuf doi: 10.1016/S1359-835X(00)00100-7 – volume: 1–10 year: 2018 ident: 10.1016/j.compstruct.2018.10.018_b0345 article-title: Different experimental ways to minimize the preforming defects of multi-layered interlock dry fabric publication-title: Int J Mater Form – volume: 90 year: 2003 ident: 10.1016/j.compstruct.2018.10.018_b0025 article-title: Geometry and Physics of Wrinkling publication-title: Phys Rev Lett doi: 10.1103/PhysRevLett.90.074302 – volume: 131 start-page: 917 year: 2015 ident: 10.1016/j.compstruct.2018.10.018_b0090 article-title: Processing of thermoset prepregs for high-volume applications and their numerical analysis using superimposed finite elements publication-title: Compos Struct doi: 10.1016/j.compstruct.2015.06.056 – volume: 140 issue: 7 year: 2018 ident: 10.1016/j.compstruct.2018.10.018_b0210 article-title: Consolidation-driven defect generation in thick composite parts publication-title: J Manuf Sci Eng doi: 10.1115/1.4039555 – volume: 47 start-page: 557 year: 2000 ident: 10.1016/j.compstruct.2018.10.018_b0300 article-title: Rotation-free triangular plate and shell elements publication-title: Int J Numer Meth Eng doi: 10.1002/(SICI)1097-0207(20000110/30)47:1/3<557::AID-NME784>3.0.CO;2-9 – volume: 81 start-page: 145 year: 2016 ident: 10.1016/j.compstruct.2018.10.018_b0145 article-title: Modelling the forming mechanics of engineering fabrics using a mutually constrained pantographic beam and membrane mesh publication-title: Compos A Appl Sci Manuf doi: 10.1016/j.compositesa.2015.11.005 – volume: 38 start-page: 1318 year: 2007 ident: 10.1016/j.compstruct.2018.10.018_b0130 article-title: A simplified rate dependent model of forming and wrinkling of pre-impregnated woven composites publication-title: Compos A Appl Sci Manuf doi: 10.1016/j.compositesa.2006.11.005 – volume: 50 start-page: 54 year: 2013 ident: 10.1016/j.compstruct.2018.10.018_b0165 article-title: An experimental study of mechanisms behind wrinkle development during forming of composite laminates publication-title: Compos A Appl Sci Manuf doi: 10.1016/j.compositesa.2013.03.013 – volume: 99 start-page: 94 year: 2017 ident: 10.1016/j.compstruct.2018.10.018_b0350 article-title: Active forming manipulation of composite reinforcements for the suppression of forming defects publication-title: Compos A Appl Sci Manuf doi: 10.1016/j.compositesa.2017.04.011 – volume: 78 start-page: 234 year: 2015 ident: 10.1016/j.compstruct.2018.10.018_b0180 article-title: Forming induced wrinkling of composite laminates with mixed ply material properties; an experimental study publication-title: Compos A Appl Sci Manuf doi: 10.1016/j.compositesa.2015.08.025 – volume: 78 start-page: 185 year: 2000 ident: 10.1016/j.compstruct.2018.10.018_b0020 article-title: Buckling of stretched strips publication-title: Comput Struct doi: 10.1016/S0045-7949(00)00072-9 – volume: 28 start-page: 339 year: 1986 ident: 10.1016/j.compstruct.2018.10.018_b0030 article-title: The complex buckling of flexible sheet materials—part I. theoretical approach publication-title: Int J Mech Sci doi: 10.1016/0020-7403(86)90054-8 – volume: 52 start-page: 559 issue: 6 year: 2016 ident: 10.1016/j.compstruct.2018.10.018_b0280 article-title: Measurement of the appearance and growth of tow buckling defect in the frame of complex shape manufacturing process by using fringe projection technique publication-title: Strain doi: 10.1111/str.12206 – volume: 67 start-page: 111 year: 2014 ident: 10.1016/j.compstruct.2018.10.018_b0275 article-title: Analysis of thermoplastic prepreg bending stiffness during manufacturing and of its influence on wrinkling simulations publication-title: Compos A Appl Sci Manuf doi: 10.1016/j.compositesa.2014.08.020 – volume: 56 start-page: 80 year: 2014 ident: 10.1016/j.compstruct.2018.10.018_b0175 article-title: Formability analyses of uni-directional and textile reinforced thermoplastics publication-title: Compos A Appl Sci Manuf doi: 10.1016/j.compositesa.2013.09.009 – volume: 61 start-page: 341 year: 2003 ident: 10.1016/j.compstruct.2018.10.018_b0060 article-title: Evaluation of bias-extension and picture-frame test methods for the measurement of intraply shear properties of PP/glass commingled fabrics publication-title: Compos Struct doi: 10.1016/S0263-8223(03)00057-6 – volume: 141 start-page: 234 year: 2018 ident: 10.1016/j.compstruct.2018.10.018_b0290 article-title: Bending and wrinkling of composite fiber preforms and prepregs. a review and new developments in the draping simulations publication-title: Compos B Eng doi: 10.1016/j.compositesb.2017.12.061 – volume: 10 year: 2017 ident: 10.1016/j.compstruct.2018.10.018_b0095 article-title: A mesoscopic analytical model to predict the onset of wrinkling in plain woven preforms under bias extension shear deformation publication-title: Materials (Basel) doi: 10.3390/ma10101184 – volume: 3 start-page: 1205 issue: 2 year: 2010 ident: 10.1016/j.compstruct.2018.10.018_b0135 article-title: Discrete mesoscopic modeling for the simulation of woven-fabric reinforcement forming publication-title: Int J Mater Form doi: 10.1007/s12289-009-0646-y – volume: 34 start-page: 1167 year: 2003 ident: 10.1016/j.compstruct.2018.10.018_b0065 article-title: Characterisation of material properties for draping of dry woven composite material publication-title: Compos A Appl Sci Manuf doi: 10.1016/j.compositesa.2003.09.001 – volume: 49 start-page: 139 year: 2013 ident: 10.1016/j.compstruct.2018.10.018_b0155 article-title: A new mechanism for the formation of ply wrinkles due to shear between plies publication-title: Compos A Appl Sci Manuf doi: 10.1016/j.compositesa.2013.03.002 – volume: 192 start-page: 143 year: 2018 ident: 10.1016/j.compstruct.2018.10.018_b0295 article-title: Forming optimisation embedded in a CAE chain to assess and enhance the structural performance of composite components publication-title: Compos Struct doi: 10.1016/j.compstruct.2018.02.041 – volume: 43 start-page: 1365 issue: 8 year: 2012 ident: 10.1016/j.compstruct.2018.10.018_b0270 article-title: Models of mechanical properties/behavior of dry fibrous materials at various scales in bending and tension: a review publication-title: Compos A Appl Sci Manuf doi: 10.1016/j.compositesa.2012.03.012 – volume: 75 start-page: 222 issue: 1–3 year: 1998 ident: 10.1016/j.compstruct.2018.10.018_b0330 article-title: A review of recent advances in the application of blank-holder force towards improving the forming limits of sheet metal parts publication-title: J Mater Process Technol doi: 10.1016/S0924-0136(97)00368-3 – volume: 6 start-page: 236 year: 1958 ident: 10.1016/j.compstruct.2018.10.018_b0005 article-title: A general theory of uniqueness and stability in elastic-plastic solids publication-title: J Mech Phys Solids doi: 10.1016/0022-5096(58)90029-2 – volume: 93 start-page: 2628 issue: 10 year: 2011 ident: 10.1016/j.compstruct.2018.10.018_b0150 article-title: Modelling slit tape buckling during automated prepreg manufacturing: a local approach publication-title: Compos Struct doi: 10.1016/j.compstruct.2011.04.030 – volume: 36 start-page: 945 year: 1994 ident: 10.1016/j.compstruct.2018.10.018_b0010 article-title: Wrinkling criterion for an anisotropic shell with compound curvatures in sheet forming publication-title: Int J Mech Sci doi: 10.1016/0020-7403(94)90056-6 – volume: 81 start-page: 41 year: 2016 ident: 10.1016/j.compstruct.2018.10.018_b0195 article-title: Forming induced wrinkling of composite laminates: a numerical study on wrinkling mechanisms publication-title: Compos A Appl Sci Manuf doi: 10.1016/j.compositesa.2015.10.012 – volume: 67 start-page: 357 year: 2007 ident: 10.1016/j.compstruct.2018.10.018_b0335 article-title: The effect of blank holder force on the stamp forming behavior of non-crimp fabric with a chain stitch publication-title: Compos Sci Technol doi: 10.1016/j.compscitech.2006.09.009 – volume: 91 start-page: 156 year: 2016 ident: 10.1016/j.compstruct.2018.10.018_b0185 article-title: Defect formation during preforming of a bi-axial non-crimp fabric with a pillar stitch pattern publication-title: Compos A Appl Sci Manuf doi: 10.1016/j.compositesa.2016.09.016 – volume: 1 start-page: 21 issue: 1 year: 2008 ident: 10.1016/j.compstruct.2018.10.018_b0265 article-title: Different approaches for woven composite reinforcement forming simulation publication-title: Int J Mater Form doi: 10.1007/s12289-008-0002-7 – volume: 105 start-page: 151 year: 2014 ident: 10.1016/j.compstruct.2018.10.018_b0170 article-title: Out-of-plane ply wrinkling defects during consolidation over an external radius publication-title: Compos Sci Technol doi: 10.1016/j.compscitech.2014.10.007 – volume: 36 start-page: 947 issue: 7 year: 2005 ident: 10.1016/j.compstruct.2018.10.018_b0070 article-title: Inverse drape modelling—an investigation of the set of shapes that can be formed from continuous aligned woven fibre reinforcements publication-title: Compos A Appl Sci Manuf doi: 10.1016/j.compositesa.2004.12.001 – volume: 52 start-page: 127 year: 2013 ident: 10.1016/j.compstruct.2018.10.018_b0320 article-title: Thermoforming simulation of multilayer composites with continuous fibres and thermoplastic matrix publication-title: Compos B Eng doi: 10.1016/j.compositesb.2013.03.045 – volume: 201 start-page: 725 year: 2008 ident: 10.1016/j.compstruct.2018.10.018_b0215 article-title: Effects of laminate sequencing on thermoforming of thermoplastic matrix composites publication-title: J Mater Process Technol doi: 10.1016/j.jmatprotec.2007.11.239 – volume: 78 start-page: 102 year: 2015 ident: 10.1016/j.compstruct.2018.10.018_b0140 article-title: Predictive model for the detection of out-of-plane defects formed during textile-composite manufacture publication-title: Compos A Appl Sci Manuf doi: 10.1016/j.compositesa.2015.07.011 – volume: 67 start-page: 3242 year: 2007 ident: 10.1016/j.compstruct.2018.10.018_b0340 article-title: Predictive modelling for optimization of textile composite forming publication-title: Compos Sci Technol doi: 10.1016/j.compscitech.2007.03.040 – volume: 79 start-page: 1443 year: 2009 ident: 10.1016/j.compstruct.2018.10.018_b0260 article-title: A semi-discrete shell finite element for textile composite reinforcement forming simulation publication-title: Int J Numer Meth Eng doi: 10.1002/nme.2625 – volume: 34 start-page: 153 year: 1997 ident: 10.1016/j.compstruct.2018.10.018_b0015 article-title: Wrinkling behavior of rectangular plates under lateral constraint publication-title: Int J Solids Struct doi: 10.1016/S0020-7683(96)00008-X – volume: 17 start-page: 643 year: 1996 ident: 10.1016/j.compstruct.2018.10.018_b0325 article-title: Deep drawing of fabric-reinforced thermoplastics: wrinkle formation and their reduction publication-title: Polym Compos doi: 10.1002/pc.10655 – volume: 3 start-page: 695 issue: 1 year: 2010 ident: 10.1016/j.compstruct.2018.10.018_b0230 article-title: Simulation of multi-layered composites forming publication-title: Int J Mater Form doi: 10.1007/s12289-010-0865-2 – year: 2012 ident: 10.1016/j.compstruct.2018.10.018_b0255 – volume: 29 start-page: 101 issue: 1–2 year: 1998 ident: 10.1016/j.compstruct.2018.10.018_b0235 article-title: Numerical and experimental investigation of some press forming parameters of two fibre reinforced thermoplastics: Apc2-as4 and pei-cetex publication-title: Compos A Appl Sci Manuf doi: 10.1016/S1359-835X(97)00060-2 – volume: 60 start-page: 641 issue: 11 year: 1990 ident: 10.1016/j.compstruct.2018.10.018_b0040 article-title: Buckling of woven fabrics.3. experimental validation of theoretical models publication-title: Text Res J doi: 10.1177/004051759006001103 – volume: 68 start-page: 336 year: 2015 ident: 10.1016/j.compstruct.2018.10.018_b0240 article-title: Effect of inter-ply sliding on the quality of multilayer interlock dry fabric preforms publication-title: Compos A Appl Sci Manuf doi: 10.1016/j.compositesa.2014.10.017 – volume: 84 start-page: 406 year: 2016 ident: 10.1016/j.compstruct.2018.10.018_b0245 article-title: Analyses of interaction mechanisms during forming of multilayer carbon woven fabrics for composite applications publication-title: Compos A Appl Sci Manuf doi: 10.1016/j.compositesa.2016.02.023 – volume: 43 start-page: 125 year: 2009 ident: 10.1016/j.compstruct.2018.10.018_b0075 article-title: Theoretical modeling of large shear deformation and wrinkling of plain woven composite publication-title: J Compos Mater doi: 10.1177/0021998308098237 – volume: 71 start-page: 683 year: 2011 ident: 10.1016/j.compstruct.2018.10.018_b0115 article-title: Simulation of wrinkling during textile composite reinforcement forming. influence of tensile, in-plane shear and bending stiffnesses publication-title: Compos Sci Technol doi: 10.1016/j.compscitech.2011.01.011 – volume: 54 start-page: 135 year: 2013 ident: 10.1016/j.compstruct.2018.10.018_b0100 article-title: Meso modelling for composite preform shaping–simulation of the loss of cohesion of the woven fibre network publication-title: Compos A Appl Sci Manuf doi: 10.1016/j.compositesa.2013.07.010 – volume: 50 start-page: 1033 year: 1983 ident: 10.1016/j.compstruct.2018.10.018_b0250 article-title: A precis of developments in computational methods for transient analysis publication-title: J Appl Mech doi: 10.1115/1.3167186 |
| SSID | ssj0008411 |
| Score | 2.5586293 |
| Snippet | Wrinkling is one of the main flaws that can appear during forming processes of textile composite reinforcements. When the forming is carried out on a... |
| SourceID | crossref elsevier |
| SourceType | Enrichment Source Index Database Publisher |
| StartPage | 213 |
| SubjectTerms | Composite reinforcements Computational modelling Fabrics/textiles Friction Multi-layer forming Wrinkling |
| Title | Experimental and numerical analysis of wrinkling during forming of multi-layered textile composites |
| URI | https://dx.doi.org/10.1016/j.compstruct.2018.10.018 |
| Volume | 208 |
| hasFullText | 1 |
| inHoldings | 1 |
| isFullTextHit | |
| isPrint | |
| journalDatabaseRights | – providerCode: PRVESC databaseName: Elsevier SD Freedom Collection Journals 2021 customDbUrl: eissn: 1879-1085 dateEnd: 99991231 omitProxy: false ssIdentifier: ssj0008411 issn: 0263-8223 databaseCode: AIEXJ dateStart: 19950101 isFulltext: true titleUrlDefault: https://www.sciencedirect.com providerName: Elsevier |
| link | http://cvtisr.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwtV1NTxsxELVS6KEcENBWBQrygRtylOy62BYnVIUvCcQhh9xWjteugpZNFAjQ_gh-MzNr70cACYrEZbNxbCfOvDyPnTdjQnaMNV1tnGU2MoJxbjTw4FDDqlWlKVCldWlaHDYhzs_lYKAuWq2HMhbmNhN5Lu_v1eRDTQ1lYGwMnf0Pc1edQgHcg9HhCmaH65sM32vm7Mdt8Xzm_5XBZ3UGkrvpqDit_U8ZqYjea5BAFypDlum_eJDnLmpDgDsK9TlKvILqsExvUJbu-lS0s2mtSjya_bvSOTvTWQoOf1rsyvba9R6-55mLdk2DV6NM-wCwap9gjIqBRr2wRYFRUV3mgzQDk0V7MQNPJG7SbtSRc8QZN-bgUPUZvfudhku0zsQPCsV5so36vEDjcxm1n8x0lf6wlLZdJnVPCfYExQk8fCKLkfilgCUXD056g9Nqbpe8ONG5GlDQhnnF4Muf6mWHp-HE9FfIclh90AOPmlXSsvkaWWrkpPxKTBM_FPBDK_zQEj907GiFH-rxQwN-8LU5_NCAH1rj5xvpH_b6v49ZOImDmZgrybpax8oq7aQyAsdmdcfEFm41LIdNZ4g5noZA_QJW-8pGygkOE6fTVmKCxvg7WcjHuf1BqOpIoS2PHJA_31Nc28hx8HFFyp0dunidiPLbSkzIUo-HpWTJazZbJ92q5cRnanlDm_3SIEnwOL0nmQDiXm298Y533CRf6l_IT7IAFewW-Wxub0bX0-0At0dZ8K7c |
| linkProvider | Elsevier |
| openUrl | ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Experimental+and+numerical+analysis+of+wrinkling+during+forming+of+multi-layered+textile+composites&rft.jtitle=Composite+structures&rft.au=Guzman-Maldonado%2C+E.&rft.au=Wang%2C+P.&rft.au=Hamila%2C+N.&rft.au=Boisse%2C+P.&rft.date=2019-01-15&rft.issn=0263-8223&rft.volume=208&rft.spage=213&rft.epage=223&rft_id=info:doi/10.1016%2Fj.compstruct.2018.10.018&rft.externalDBID=n%2Fa&rft.externalDocID=10_1016_j_compstruct_2018_10_018 |
| thumbnail_l | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=0263-8223&client=summon |
| thumbnail_m | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=0263-8223&client=summon |
| thumbnail_s | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=0263-8223&client=summon |