Thermal analysis of tubular arrangements submitted to external flow using constructal theory
Present work performs a numerical study about the energy removal in a heated tubular array submitted to an external flow. Taking into account that a large variety of tubular arrangements can exists, in this work it is developed a tubular array that does not use any kind of initial predefined arrange...
Gespeichert in:
| Veröffentlicht in: | International communications in heat and mass transfer Jg. 111; S. 104458 |
|---|---|
| Hauptverfasser: | , , , |
| Format: | Journal Article |
| Sprache: | Englisch |
| Veröffentlicht: |
Elsevier Ltd
01.02.2020
|
| Schlagworte: | |
| ISSN: | 0735-1933, 1879-0178 |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Abstract | Present work performs a numerical study about the energy removal in a heated tubular array submitted to an external flow. Taking into account that a large variety of tubular arrangements can exists, in this work it is developed a tubular array that does not use any kind of initial predefined arrangement. Using the principles of Constructal Theory (or Law) and a positioning function dependent on the velocity and temperature fields, it is calculated, in a deterministic way, the location where each tube should be positioned. Pressure drop is not taken in to account in this first algorithm implementation as a performance indicator. In order to validate the proposed methodology, the Constructal Array is compared with standard aligned and staggered arrangements suggested in literature. The minimum distance between tubes (p) is considered as a degree of freedom. Four variations are studied: p = 1D, p = 1.25D, p = 1.5D and p = 2D, where D is the tube diameter. It is considered here the simulation of a transient, incompressible and laminar flow of a Newtonian fluid in a two-dimensional domain with forced convection and Prandtl number equal to 0.71. Results are computed when the flow reaches to the steady state condition. It is evaluated three values for Reynolds number: ReD = 10, 50 and 100. Thermal analysis of the formed patterns has shown that best thermal performance was not obtained with p = 1D, neither with p = 2D, i.e., tube distance has an influence on its formation and, consequently, on the heat transfer exchange. In all performed analyzes, Constructal arrays configuration showed higher energy removal (up to 71%) than the aligned and staggered arrangements, which highlights the capacity of proposed method. Constructal Array for p = 1.5D showed the most homogeneous distribution and proved to be the most effective in 4 of the six studied cases. |
|---|---|
| AbstractList | Present work performs a numerical study about the energy removal in a heated tubular array submitted to an external flow. Taking into account that a large variety of tubular arrangements can exists, in this work it is developed a tubular array that does not use any kind of initial predefined arrangement. Using the principles of Constructal Theory (or Law) and a positioning function dependent on the velocity and temperature fields, it is calculated, in a deterministic way, the location where each tube should be positioned. Pressure drop is not taken in to account in this first algorithm implementation as a performance indicator. In order to validate the proposed methodology, the Constructal Array is compared with standard aligned and staggered arrangements suggested in literature. The minimum distance between tubes (p) is considered as a degree of freedom. Four variations are studied: p = 1D, p = 1.25D, p = 1.5D and p = 2D, where D is the tube diameter. It is considered here the simulation of a transient, incompressible and laminar flow of a Newtonian fluid in a two-dimensional domain with forced convection and Prandtl number equal to 0.71. Results are computed when the flow reaches to the steady state condition. It is evaluated three values for Reynolds number: ReD = 10, 50 and 100. Thermal analysis of the formed patterns has shown that best thermal performance was not obtained with p = 1D, neither with p = 2D, i.e., tube distance has an influence on its formation and, consequently, on the heat transfer exchange. In all performed analyzes, Constructal arrays configuration showed higher energy removal (up to 71%) than the aligned and staggered arrangements, which highlights the capacity of proposed method. Constructal Array for p = 1.5D showed the most homogeneous distribution and proved to be the most effective in 4 of the six studied cases. |
| ArticleNumber | 104458 |
| Author | de Escobar, C.C. Souza, J.A. Pedroti, V.A. dos Santos, E.D. |
| Author_xml | – sequence: 1 givenname: V.A. surname: Pedroti fullname: Pedroti, V.A. – sequence: 2 givenname: C.C. surname: de Escobar fullname: de Escobar, C.C. – sequence: 3 givenname: E.D. surname: dos Santos fullname: dos Santos, E.D. – sequence: 4 givenname: J.A. surname: Souza fullname: Souza, J.A. email: jefersonsouza@furg.br |
| BookMark | eNqVkD1PwzAQhi0EEm3hP3hkSbHjNrE3UEX5UCWWsiFFF-fSukpsZDtA_z2uygQLTCfdq_fR3TMmp9ZZJOSKsylnvLjeTY3eIsQeQogebGjRT3PGVYpns7k8ISMuS5UxXspTMmKlmGdcCXFOxiHsGGNccjkir-st-h46Cha6fTCBupbGoR468BR8Am-wRxsDDUPdmxixodFR_IzoU4O2nfugQzB2Q7Wz6ZJBx7SOW3R-f0HOWugCXn7PCXlZ3q0XD9nq-f5xcbvKtJjlMWtqoQrgc1brUmKji0ZjnkMhFKhaSZgXDdeciVIy0JLnLWheaGB1wdtUUGJClkeu9i4Ej22lTYRonE1mTFdxVh2cVbvqt7Pq4Kw6Okugmx-gN2968Pv_IJ6OCEwPv5uUBm3QamyMRx2rxpm_w74AhZidtQ |
| CitedBy_id | crossref_primary_10_1007_s10973_025_14293_7 crossref_primary_10_1016_j_icheatmasstransfer_2021_105622 crossref_primary_10_1134_S1810232823020078 crossref_primary_10_3390_e23111528 crossref_primary_10_1007_s10973_025_14630_w crossref_primary_10_3390_fluids8120317 crossref_primary_10_32604_fdmp_2023_019763 crossref_primary_10_1016_j_solmat_2023_112315 crossref_primary_10_1016_j_tca_2021_178941 crossref_primary_10_1016_j_icheatmasstransfer_2024_107553 crossref_primary_10_4028_p_26iX9b crossref_primary_10_3390_e22060651 crossref_primary_10_1016_j_icheatmasstransfer_2023_106891 |
| Cites_doi | 10.1115/1.4029851 10.1016/j.ijthermalsci.2014.04.011 10.1016/j.ijheatmasstransfer.2013.03.006 10.1016/j.ijheatmasstransfer.2005.12.015 10.1016/j.energy.2013.11.035 10.1016/j.jfluidstructs.2010.07.001 10.1115/1.4027195 10.2514/1.26824 10.1115/1.4029868 10.1115/1.4043570 10.1016/j.ijthermalsci.2017.01.015 10.1016/j.ijheatmasstransfer.2018.04.134 10.1007/s12046-018-0951-6 10.1115/1.4027421 10.1063/1.4978611 10.1016/j.applthermaleng.2016.10.052 10.1590/1679-78252893 10.1016/j.ijheatmasstransfer.2013.09.062 10.1016/j.energy.2015.09.058 10.1002/nme.2579 10.1016/j.ijheatmasstransfer.2017.07.010 10.1016/j.ijheatmasstransfer.2011.02.004 10.1016/j.apm.2008.01.017 10.1016/j.ijheatmasstransfer.2016.03.092 10.2514/1.T5033 10.1016/j.ijheatmasstransfer.2005.09.030 10.1063/1.5078745 10.1016/j.ijheatmasstransfer.2017.11.057 10.1016/j.ijheatmasstransfer.2018.11.057 10.1016/0017-9310(95)00122-P 10.1016/j.renene.2017.03.007 10.1016/j.energy.2018.07.092 10.1016/S1290-0729(03)00058-9 10.1016/j.ijheatmasstransfer.2016.06.026 10.1016/j.compfluid.2010.01.002 10.1016/j.ijheatmasstransfer.2005.05.023 10.1016/j.ijthermalsci.2018.08.013 10.1016/j.ijthermalsci.2018.07.020 10.1134/S181023281901003X 10.1016/j.ijthermalsci.2017.12.023 10.1016/j.jweia.2017.08.013 |
| ContentType | Journal Article |
| Copyright | 2019 Elsevier Ltd |
| Copyright_xml | – notice: 2019 Elsevier Ltd |
| DBID | AAYXX CITATION |
| DOI | 10.1016/j.icheatmasstransfer.2019.104458 |
| DatabaseName | CrossRef |
| DatabaseTitle | CrossRef |
| DatabaseTitleList | |
| DeliveryMethod | fulltext_linktorsrc |
| Discipline | Engineering Physics |
| EISSN | 1879-0178 |
| ExternalDocumentID | 10_1016_j_icheatmasstransfer_2019_104458 S0735193319303240 |
| GroupedDBID | --K --M -~X .~1 0R~ 1B1 1~. 1~5 29J 4.4 457 4G. 5GY 5VS 6TJ 7-5 71M 8P~ 9JN AACTN AAEDT AAEDW AAIAV AAIKJ AAKOC AALRI AAOAW AAQFI AAQXK AAXUO ABEFU ABFNM ABJNI ABMAC ABNUV ABXDB ABYKQ ACDAQ ACGFS ACNNM ACRLP ADBBV ADEWK ADEZE ADMUD ADTZH AEBSH AECPX AEKER AENEX AFKWA AFTJW AGHFR AGUBO AGYEJ AHHHB AHJVU AHPOS AIEXJ AIKHN AITUG AJBFU AJOXV AKURH ALMA_UNASSIGNED_HOLDINGS AMFUW AMRAJ ASPBG AVWKF AXJTR AZFZN BJAXD BKOJK BLXMC CS3 DU5 EBS EFJIC EFLBG EJD ENUVR EO8 EO9 EP2 EP3 FDB FEDTE FGOYB FIRID FNPLU FYGXN G-2 G-Q GBLVA HVGLF HZ~ IHE J1W JJJVA KOM LY7 M41 MO0 N9A O-L O9- OAUVE OZT P-8 P-9 P2P PC. Q38 R2- RIG RNS ROL RPZ SDF SDG SDP SES SET SEW SPC SPCBC SSG SST SSZ T5K WUQ XPP ~G- 9DU AATTM AAXKI AAYWO AAYXX ABWVN ACLOT ACRPL ACVFH ADCNI ADNMO AEIPS AEUPX AFJKZ AFPUW AGQPQ AIGII AIIUN AKBMS AKRWK AKYEP ANKPU APXCP CITATION EFKBS ~HD |
| ID | FETCH-LOGICAL-c342t-db396a150bc78edc6dce22a639a9b98a56d1c103780ac812fac16ca0b61f78e93 |
| ISICitedReferencesCount | 15 |
| ISICitedReferencesURI | http://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=Summon&SrcAuth=ProQuest&DestLinkType=CitingArticles&DestApp=WOS_CPL&KeyUT=000517659400017&url=https%3A%2F%2Fcvtisr.summon.serialssolutions.com%2F%23%21%2Fsearch%3Fho%3Df%26include.ft.matches%3Dt%26l%3Dnull%26q%3D |
| ISSN | 0735-1933 |
| IngestDate | Tue Nov 18 22:30:58 EST 2025 Sat Nov 29 07:12:44 EST 2025 Fri Feb 23 02:48:30 EST 2024 |
| IsPeerReviewed | true |
| IsScholarly | true |
| Keywords | Constructal Theory GA Deterministic algorithm Tube heat exchanger Numerical Modeling |
| Language | English |
| LinkModel | OpenURL |
| MergedId | FETCHMERGED-LOGICAL-c342t-db396a150bc78edc6dce22a639a9b98a56d1c103780ac812fac16ca0b61f78e93 |
| ParticipantIDs | crossref_citationtrail_10_1016_j_icheatmasstransfer_2019_104458 crossref_primary_10_1016_j_icheatmasstransfer_2019_104458 elsevier_sciencedirect_doi_10_1016_j_icheatmasstransfer_2019_104458 |
| PublicationCentury | 2000 |
| PublicationDate | February 2020 2020-02-00 |
| PublicationDateYYYYMMDD | 2020-02-01 |
| PublicationDate_xml | – month: 02 year: 2020 text: February 2020 |
| PublicationDecade | 2020 |
| PublicationTitle | International communications in heat and mass transfer |
| PublicationYear | 2020 |
| Publisher | Elsevier Ltd |
| Publisher_xml | – name: Elsevier Ltd |
| References | Yilmaz, Erdinç, Yilmaz (bb0085) 2017; 31 Bejan (bb0115) 2000 Xie, Song, Asadi, Lorenzini (bb0160) 2015; 137 Ranut, Janiga, Nobile, Thévenin (bb0110) 2014; 68 Hilbert, Janiga, Baron, Thévenin (bb0105) 2006; 49 Bejan (bb0165) 2018; 160 Lorenzini, Biserni, Estrada, Isoldi, dos Santos, Rocha (bb0265) 2014; 136 Vieira, Petry, Rocha, Isoldi, dos Santos (bb0155) 2017; 109 Versteeg, Malalasekra (bb0250) 2007 Bao, Zhou, Huang (bb0065) 2010; 39 Helbig, da Silva, Real, dos Santos, Isoldi, Rocha (bb0140) 2016; 13 Ordonez, Bejan, Cherry (bb0210) 2003; 42 Barros, Lorenzini, Isoldi, Rocha, dos Santos (bb0190) 2017; 114 Çengel (bb0260) 2011 Khanafer, Aithal, Vafai (bb0055) 2019; 135 Zdravkovich (bb0005) 1997 Lorenzini, Biserni, Correa, dos Santos, Isoldi, Rocha (bb0145) 2014; 83 Lorenzini, Biserni, da Silva Diaz Estrada, Domingues Dos Santos, André Isoldi, Oliveira Rocha (bb0150) 2014; 136 Geuzaine, Remacle (bb0240) 2009; 79 Qiu, Liu, He, He, Dong (bb0070) 2017; 170 Gupta, Chandra, Gupta (bb0045) 2018; 43 Teixeira, Lorenzini, Errera, Rocha, Isoldi, dos Santos (bb0195) 2018; 126 Bejan, Lorente (bb0120) 2008 Daróczy, Janiga, Thévenin (bb0095) 2014; 65 Li, Zhou, Sun, Dong (bb0035) 2016; 99 Khan, Culham, Yovanovich (bb0090) 2007; 21 Salcedo, Treviño, Palacios-Morales, Zenit, Martínez-Suástegui (bb0060) 2017; 115 Wang, Shu, Yu, Tian, Ma, Chen (bb0025) 2018; 119 Horvat, Leskovar, Mavko (bb0080) 2006; 49 Patankar (bb0245) 1980 Rajani, Kandasamy, Majumdar (bb0015) 2009; 33 Errera, Bejan (bb0205) 1998; 6 Vianna, Estrada, Isoldi, dos Santos, Souza (bb0220) 2018; 126 Bello-Ochende, Meyer, Ogunronbi (bb0180) 2011; 54 Estrada, Fagundes, Isoldi, dos Santos, Xie, Rocha (bb0135) 2015; 137 Kumar, Dhiman, Baranyi (bb0030) 2016; 102 Souza, Ordonez (bb0215) 2013 Rashidi, Tamayol, Valipour, Shokri (bb0020) 2013; 63 ANSYS (bb0255) 2012 Bouzari, Ghazanfarian (bb0040) 2017; 112 Bejan (bb0130) 2016 Gonzales, Estrada, Emmendorfer, Isoldi, Xie, Rocha, dos Santos (bb0270) 2015; 93 Bejan (bb0125) 2012 Avendaño, Souza, Adamatti (bb0230) 2018; 134 Fagundes, Lorenzini, Estrada, Isoldi, dos Santos, Rocha, da Silva Neto (bb0200) 2019; 28 Bejan (bb0235) 2013 Gouvêa, Moreira, Souza (bb0225) 2019; 125 Bello-Ochende, Bejan (bb0175) 2005; 48 Rocha, das Gomes, Galarça, Acunha, da Silva, Isoldi, Santos (bb0185) 2013 Stanescu, Fowler, Bejan (bb0075) 1996; 39 Sumner (bb0010) 2010; 26 Chamoli, Tang, Yu, Lu (bb0050) 2019; 131 Ge, Xin, Pan, Liu, Liu (bb0100) 2019; 141 Bejan (bb0170) 2017; 4 Vianna (10.1016/j.icheatmasstransfer.2019.104458_bb0220) 2018; 126 Bejan (10.1016/j.icheatmasstransfer.2019.104458_bb0165) 2018; 160 Horvat (10.1016/j.icheatmasstransfer.2019.104458_bb0080) 2006; 49 Yilmaz (10.1016/j.icheatmasstransfer.2019.104458_bb0085) 2017; 31 Xie (10.1016/j.icheatmasstransfer.2019.104458_bb0160) 2015; 137 Bejan (10.1016/j.icheatmasstransfer.2019.104458_bb0235) 2013 Teixeira (10.1016/j.icheatmasstransfer.2019.104458_bb0195) 2018; 126 Rocha (10.1016/j.icheatmasstransfer.2019.104458_bb0185) 2013 Ge (10.1016/j.icheatmasstransfer.2019.104458_bb0100) 2019; 141 Rajani (10.1016/j.icheatmasstransfer.2019.104458_bb0015) 2009; 33 Bejan (10.1016/j.icheatmasstransfer.2019.104458_bb0130) 2016 Vieira (10.1016/j.icheatmasstransfer.2019.104458_bb0155) 2017; 109 Stanescu (10.1016/j.icheatmasstransfer.2019.104458_bb0075) 1996; 39 Rashidi (10.1016/j.icheatmasstransfer.2019.104458_bb0020) 2013; 63 Bouzari (10.1016/j.icheatmasstransfer.2019.104458_bb0040) 2017; 112 Hilbert (10.1016/j.icheatmasstransfer.2019.104458_bb0105) 2006; 49 Gupta (10.1016/j.icheatmasstransfer.2019.104458_bb0045) 2018; 43 Sumner (10.1016/j.icheatmasstransfer.2019.104458_bb0010) 2010; 26 Ranut (10.1016/j.icheatmasstransfer.2019.104458_bb0110) 2014; 68 Li (10.1016/j.icheatmasstransfer.2019.104458_bb0035) 2016; 99 Bello-Ochende (10.1016/j.icheatmasstransfer.2019.104458_bb0180) 2011; 54 Estrada (10.1016/j.icheatmasstransfer.2019.104458_bb0135) 2015; 137 Bejan (10.1016/j.icheatmasstransfer.2019.104458_bb0115) 2000 Bejan (10.1016/j.icheatmasstransfer.2019.104458_bb0120) 2008 Gouvêa (10.1016/j.icheatmasstransfer.2019.104458_bb0225) 2019; 125 Bejan (10.1016/j.icheatmasstransfer.2019.104458_bb0170) 2017; 4 Çengel (10.1016/j.icheatmasstransfer.2019.104458_bb0260) 2011 Geuzaine (10.1016/j.icheatmasstransfer.2019.104458_bb0240) 2009; 79 Fagundes (10.1016/j.icheatmasstransfer.2019.104458_bb0200) 2019; 28 Souza (10.1016/j.icheatmasstransfer.2019.104458_bb0215) 2013 Kumar (10.1016/j.icheatmasstransfer.2019.104458_bb0030) 2016; 102 Khan (10.1016/j.icheatmasstransfer.2019.104458_bb0090) 2007; 21 Bello-Ochende (10.1016/j.icheatmasstransfer.2019.104458_bb0175) 2005; 48 Ordonez (10.1016/j.icheatmasstransfer.2019.104458_bb0210) 2003; 42 Lorenzini (10.1016/j.icheatmasstransfer.2019.104458_bb0265) 2014; 136 Versteeg (10.1016/j.icheatmasstransfer.2019.104458_bb0250) 2007 ANSYS (10.1016/j.icheatmasstransfer.2019.104458_bb0255) Chamoli (10.1016/j.icheatmasstransfer.2019.104458_bb0050) 2019; 131 Lorenzini (10.1016/j.icheatmasstransfer.2019.104458_bb0145) 2014; 83 Barros (10.1016/j.icheatmasstransfer.2019.104458_bb0190) 2017; 114 Helbig (10.1016/j.icheatmasstransfer.2019.104458_bb0140) 2016; 13 Bejan (10.1016/j.icheatmasstransfer.2019.104458_bb0125) 2012 Zdravkovich (10.1016/j.icheatmasstransfer.2019.104458_bb0005) 1997 Avendaño (10.1016/j.icheatmasstransfer.2019.104458_bb0230) 2018; 134 Lorenzini (10.1016/j.icheatmasstransfer.2019.104458_bb0150) 2014; 136 Daróczy (10.1016/j.icheatmasstransfer.2019.104458_bb0095) 2014; 65 Khanafer (10.1016/j.icheatmasstransfer.2019.104458_bb0055) 2019; 135 Gonzales (10.1016/j.icheatmasstransfer.2019.104458_bb0270) 2015; 93 Wang (10.1016/j.icheatmasstransfer.2019.104458_bb0025) 2018; 119 Qiu (10.1016/j.icheatmasstransfer.2019.104458_bb0070) 2017; 170 Patankar (10.1016/j.icheatmasstransfer.2019.104458_bb0245) 1980 Salcedo (10.1016/j.icheatmasstransfer.2019.104458_bb0060) 2017; 115 Bao (10.1016/j.icheatmasstransfer.2019.104458_bb0065) 2010; 39 Errera (10.1016/j.icheatmasstransfer.2019.104458_bb0205) 1998; 6 |
| References_xml | – volume: 170 start-page: 185 year: 2017 end-page: 196 ident: bb0070 article-title: Experimental study for the cross-flow around three cylinders in an isosceles right triangle configuration publication-title: J. Wind Eng. Ind. Aerodyn. – year: 2012 ident: bb0125 article-title: Design in Nature: How the Constructal Law Governs Evolution in Biology, Physics, Technology, and Social Organization – volume: 43 year: 2018 ident: bb0045 article-title: Buoyancy-driven convective heat transfer from a semi-circular cylinder for various confinements publication-title: Sādhanā. – volume: 99 start-page: 20 year: 2016 end-page: 30 ident: bb0035 article-title: External forced convection from circular cylinders with surface protrusions publication-title: Int. J. Heat Mass Transf. – volume: 83 start-page: 96 year: 2014 end-page: 103 ident: bb0145 article-title: Constructal design of T-shaped assemblies of fins cooling a cylindrical solid body publication-title: Int. J. Therm. Sci. – volume: 115 start-page: 176 year: 2017 end-page: 196 ident: bb0060 article-title: Experimental study on laminar flow over two confined isothermal cylinders in tandem during mixed convection publication-title: Int. J. Therm. Sci. – year: 2011 ident: bb0260 article-title: Heat and Mass Transfer: Fundamentals & Applications – volume: 141 year: 2019 ident: bb0100 article-title: Optimal arrangement design of a tube bundle in cross-flow using computational fluid dynamics and multi-objective genetic algorithm publication-title: J. Heat Transf. – volume: 136 year: 2014 ident: bb0150 article-title: Genetic algorithm applied to geometric optimization of isothermal Y-shaped cavities publication-title: J. Electron. Packag. – year: 2013 ident: bb0235 article-title: Convection Heat Transfer: Bejan/Convection Heat Transfer 4e – year: 2012 ident: bb0255 article-title: ANSYS FLUENT 14 Theory Guide – volume: 31 start-page: 878 year: 2017 end-page: 888 ident: bb0085 article-title: Optimization of crossflow staggered tube banks for prescribed pressure loss and effectiveness publication-title: J. Thermophys. Heat Transf. – volume: 134 start-page: 200 year: 2018 end-page: 207 ident: bb0230 article-title: Construction of conductive pathways using genetic algorithms and constructal theory publication-title: Int. J. Therm. Sci. – volume: 49 start-page: 1027 year: 2006 end-page: 1038 ident: bb0080 article-title: Comparison of heat transfer conditions in tube bundle cross-flow for different tube shapes publication-title: Int. J. Heat Mass Transf. – start-page: 174 year: 2013 end-page: 184 ident: bb0185 article-title: Constructal design of turbulent forced convective flows over a pair of circular cylinders publication-title: Proceedings of Constructal Law Conference – volume: 109 start-page: 222 year: 2017 end-page: 234 ident: bb0155 article-title: Numerical evaluation of a solar chimney geometry for different ground temperatures by means of constructal design publication-title: Renew. Energy – volume: 54 start-page: 2568 year: 2011 end-page: 2577 ident: bb0180 article-title: Constructal multiscale cylinders rotating in cross-flow publication-title: Int. J. Heat Mass Transf. – volume: 125 year: 2019 ident: bb0225 article-title: Evolutionary design algorithm for optimal light trapping in solar cells publication-title: J. Appl. Phys. – volume: 26 start-page: 849 year: 2010 end-page: 899 ident: bb0010 article-title: Two circular cylinders in cross-flow: a review publication-title: J. Fluid. Struct. – volume: 119 start-page: 742 year: 2018 end-page: 751 ident: bb0025 article-title: Numerical analysis of forced convection of high-temperature exhaust gas around a metal-foam wrapped cylinder publication-title: Int. J. Heat Mass Transf. – volume: 13 start-page: 1912 year: 2016 end-page: 1936 ident: bb0140 article-title: Study about buckling phenomenon in perforated thin steel plates employing computational modeling and constructal design method publication-title: Latin Am. J. Solid. Struct. – volume: 126 start-page: 118 year: 2018 end-page: 124 ident: bb0220 article-title: A new constructal theory based algorithm applied to thermal problems publication-title: Int. J. Therm. Sci. – volume: 79 start-page: 1309 year: 2009 end-page: 1331 ident: bb0240 article-title: Gmsh: a 3-D finite element mesh generator with built-in pre- and post-processing facilities publication-title: Int. J. Numer. Methods Eng. – year: 2016 ident: bb0130 article-title: The Physics of Life: The Evolution of Everything – start-page: 91 year: 2013 end-page: 111 ident: bb0215 article-title: Constructal design of high-conductivity inserts publication-title: Constructal Law and the Unifying Principle of Design – volume: 39 start-page: 882 year: 2010 end-page: 899 ident: bb0065 article-title: Numerical simulation of flow over three circular cylinders in equilateral arrangements at low Reynolds number by a second-order characteristic-based split finite element method publication-title: Comput. Fluids – volume: 137 year: 2015 ident: bb0135 article-title: Constructal design associated to genetic algorithm of asymmetric V-shaped pathways publication-title: J. Heat Transf. – volume: 4 year: 2017 ident: bb0170 article-title: Evolution in thermodynamics publication-title: Appl. Phys. Rev. – volume: 135 start-page: 117 year: 2019 end-page: 132 ident: bb0055 article-title: Mixed convection heat transfer in a differentially heated cavity with two rotating cylinders publication-title: Int. J. Therm. Sci. – volume: 6 start-page: 245 year: 1998 end-page: 261 ident: bb0205 article-title: Deterministic tree networks for river drainage basins, fractals - an interdisciplinary journal on the complex geometry of publication-title: Nature. – volume: 63 start-page: 91 year: 2013 end-page: 100 ident: bb0020 article-title: Fluid flow and forced convection heat transfer around a solid cylinder wrapped with a porous ring publication-title: Int. J. Heat Mass Transf. – volume: 102 start-page: 417 year: 2016 end-page: 425 ident: bb0030 article-title: Fluid flow and heat transfer around a confined semi-circular cylinder: onset of vortex shedding and effects of Reynolds and Prandtl numbers publication-title: Int. J. Heat Mass Transf. – year: 2008 ident: bb0120 article-title: Design with Constructal Theory – volume: 136 year: 2014 ident: bb0265 article-title: Constructal Design of Convective Y-shaped cavities by means of genetic algorithm publication-title: J. Heat Transf. – volume: 65 start-page: 364 year: 2014 end-page: 373 ident: bb0095 article-title: Systematic analysis of the heat exchanger arrangement problem using multi-objective genetic optimization publication-title: Energy. – volume: 28 start-page: 26 year: 2019 end-page: 42 ident: bb0200 article-title: Constructal design of conductive asymmetric tri-forked pathways publication-title: J. Eng. Thermophys. – volume: 126 start-page: 521 year: 2018 end-page: 535 ident: bb0195 article-title: Constructal design of triangular arrangements of square bluff bodies under forced convective turbulent flows publication-title: Int. J. Heat Mass Transf. – year: 1980 ident: bb0245 article-title: Numerical Heat Transfer and Fluid Flow – volume: 93 start-page: 372 year: 2015 end-page: 382 ident: bb0270 article-title: A comparison of simulated annealing schedules for constructal design of complex cavities intruded into conductive walls with internal heat generation publication-title: Energy – year: 1997 ident: bb0005 article-title: Flow around Circular Cylinders: A Comprehensive Guide through Flow Phenomena, Experiments, Applications, Mathematical Models, and Computer Simulations – volume: 114 start-page: 1188 year: 2017 end-page: 1200 ident: bb0190 article-title: Influence of mixed convection laminar flows on the geometrical evaluation of a triangular arrangement of circular cylinders publication-title: Int. J. Heat Mass Transf. – volume: 49 start-page: 2567 year: 2006 end-page: 2577 ident: bb0105 article-title: Multi-objective shape optimization of a heat exchanger using parallel genetic algorithms publication-title: Int. J. Heat Mass Transf. – volume: 112 start-page: 214 year: 2017 end-page: 225 ident: bb0040 article-title: Unsteady forced convection over cylinder with radial fins in cross flow publication-title: Appl. Therm. Eng. – volume: 68 start-page: 585 year: 2014 end-page: 598 ident: bb0110 article-title: Multi-objective shape optimization of a tube bundle in cross-flow publication-title: Int. J. Heat Mass Transf. – volume: 39 start-page: 311 year: 1996 end-page: 317 ident: bb0075 article-title: The optimal spacing of cylinders in free-stream cross-flow forced convection publication-title: Int. J. Heat Mass Transf. – volume: 160 start-page: 1208 year: 2018 end-page: 1219 ident: bb0165 article-title: Thermodynamics today publication-title: Energy. – volume: 131 start-page: 1147 year: 2019 end-page: 1163 ident: bb0050 article-title: Effect of shape modification on heat transfer and drag for fluid flow past a cam-shaped cylinder publication-title: Int. J. Heat Mass Transf. – year: 2007 ident: bb0250 article-title: An Introduction to Computational Fluid Dynamics: The Finite Volume Method – volume: 21 start-page: 372 year: 2007 end-page: 378 ident: bb0090 article-title: Optimal design of tube banks in crossflow using entropy generation minimization method publication-title: J. Thermophys. Heat Transf. – year: 2000 ident: bb0115 article-title: Shape and Structure, from Engineering to Nature – volume: 137 year: 2015 ident: bb0160 article-title: Optimization of pin-fins for a heat exchanger by entropy generation minimization and constructal law publication-title: J. Heat Transf. – volume: 48 start-page: 4300 year: 2005 end-page: 4306 ident: bb0175 article-title: Constructal multi-scale cylinders with natural convection publication-title: Int. J. Heat Mass Transf. – volume: 33 start-page: 1228 year: 2009 end-page: 1247 ident: bb0015 article-title: Numerical simulation of laminar flow past a circular cylinder publication-title: Appl. Math. Model. – volume: 42 start-page: 857 year: 2003 end-page: 870 ident: bb0210 article-title: Designed porous media: optimally nonuniform flow structures connecting one point with more points publication-title: Int. J. Therm. Sci. – volume: 137 year: 2015 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0160 article-title: Optimization of pin-fins for a heat exchanger by entropy generation minimization and constructal law publication-title: J. Heat Transf. doi: 10.1115/1.4029851 – volume: 83 start-page: 96 year: 2014 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0145 article-title: Constructal design of T-shaped assemblies of fins cooling a cylindrical solid body publication-title: Int. J. Therm. Sci. doi: 10.1016/j.ijthermalsci.2014.04.011 – volume: 63 start-page: 91 year: 2013 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0020 article-title: Fluid flow and forced convection heat transfer around a solid cylinder wrapped with a porous ring publication-title: Int. J. Heat Mass Transf. doi: 10.1016/j.ijheatmasstransfer.2013.03.006 – volume: 49 start-page: 2567 year: 2006 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0105 article-title: Multi-objective shape optimization of a heat exchanger using parallel genetic algorithms publication-title: Int. J. Heat Mass Transf. doi: 10.1016/j.ijheatmasstransfer.2005.12.015 – volume: 65 start-page: 364 year: 2014 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0095 article-title: Systematic analysis of the heat exchanger arrangement problem using multi-objective genetic optimization publication-title: Energy. doi: 10.1016/j.energy.2013.11.035 – volume: 26 start-page: 849 year: 2010 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0010 article-title: Two circular cylinders in cross-flow: a review publication-title: J. Fluid. Struct. doi: 10.1016/j.jfluidstructs.2010.07.001 – volume: 136 year: 2014 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0265 article-title: Constructal Design of Convective Y-shaped cavities by means of genetic algorithm publication-title: J. Heat Transf. doi: 10.1115/1.4027195 – volume: 21 start-page: 372 year: 2007 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0090 article-title: Optimal design of tube banks in crossflow using entropy generation minimization method publication-title: J. Thermophys. Heat Transf. doi: 10.2514/1.26824 – volume: 137 year: 2015 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0135 article-title: Constructal design associated to genetic algorithm of asymmetric V-shaped pathways publication-title: J. Heat Transf. doi: 10.1115/1.4029868 – volume: 141 year: 2019 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0100 article-title: Optimal arrangement design of a tube bundle in cross-flow using computational fluid dynamics and multi-objective genetic algorithm publication-title: J. Heat Transf. doi: 10.1115/1.4043570 – ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0255 – volume: 115 start-page: 176 year: 2017 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0060 article-title: Experimental study on laminar flow over two confined isothermal cylinders in tandem during mixed convection publication-title: Int. J. Therm. Sci. doi: 10.1016/j.ijthermalsci.2017.01.015 – volume: 126 start-page: 521 year: 2018 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0195 article-title: Constructal design of triangular arrangements of square bluff bodies under forced convective turbulent flows publication-title: Int. J. Heat Mass Transf. doi: 10.1016/j.ijheatmasstransfer.2018.04.134 – volume: 43 year: 2018 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0045 article-title: Buoyancy-driven convective heat transfer from a semi-circular cylinder for various confinements publication-title: Sādhanā. doi: 10.1007/s12046-018-0951-6 – volume: 136 year: 2014 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0150 article-title: Genetic algorithm applied to geometric optimization of isothermal Y-shaped cavities publication-title: J. Electron. Packag. doi: 10.1115/1.4027421 – volume: 4 year: 2017 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0170 article-title: Evolution in thermodynamics publication-title: Appl. Phys. Rev. doi: 10.1063/1.4978611 – volume: 112 start-page: 214 year: 2017 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0040 article-title: Unsteady forced convection over cylinder with radial fins in cross flow publication-title: Appl. Therm. Eng. doi: 10.1016/j.applthermaleng.2016.10.052 – volume: 13 start-page: 1912 year: 2016 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0140 article-title: Study about buckling phenomenon in perforated thin steel plates employing computational modeling and constructal design method publication-title: Latin Am. J. Solid. Struct. doi: 10.1590/1679-78252893 – volume: 68 start-page: 585 year: 2014 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0110 article-title: Multi-objective shape optimization of a tube bundle in cross-flow publication-title: Int. J. Heat Mass Transf. doi: 10.1016/j.ijheatmasstransfer.2013.09.062 – volume: 93 start-page: 372 year: 2015 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0270 article-title: A comparison of simulated annealing schedules for constructal design of complex cavities intruded into conductive walls with internal heat generation publication-title: Energy doi: 10.1016/j.energy.2015.09.058 – year: 2008 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0120 – year: 2007 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0250 – start-page: 91 year: 2013 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0215 article-title: Constructal design of high-conductivity inserts – volume: 79 start-page: 1309 year: 2009 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0240 article-title: Gmsh: a 3-D finite element mesh generator with built-in pre- and post-processing facilities publication-title: Int. J. Numer. Methods Eng. doi: 10.1002/nme.2579 – volume: 114 start-page: 1188 year: 2017 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0190 article-title: Influence of mixed convection laminar flows on the geometrical evaluation of a triangular arrangement of circular cylinders publication-title: Int. J. Heat Mass Transf. doi: 10.1016/j.ijheatmasstransfer.2017.07.010 – volume: 54 start-page: 2568 year: 2011 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0180 article-title: Constructal multiscale cylinders rotating in cross-flow publication-title: Int. J. Heat Mass Transf. doi: 10.1016/j.ijheatmasstransfer.2011.02.004 – volume: 33 start-page: 1228 year: 2009 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0015 article-title: Numerical simulation of laminar flow past a circular cylinder publication-title: Appl. Math. Model. doi: 10.1016/j.apm.2008.01.017 – volume: 99 start-page: 20 year: 2016 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0035 article-title: External forced convection from circular cylinders with surface protrusions publication-title: Int. J. Heat Mass Transf. doi: 10.1016/j.ijheatmasstransfer.2016.03.092 – year: 2013 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0235 – volume: 6 start-page: 245 year: 1998 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0205 article-title: Deterministic tree networks for river drainage basins, fractals - an interdisciplinary journal on the complex geometry of publication-title: Nature. – volume: 31 start-page: 878 year: 2017 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0085 article-title: Optimization of crossflow staggered tube banks for prescribed pressure loss and effectiveness publication-title: J. Thermophys. Heat Transf. doi: 10.2514/1.T5033 – year: 2012 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0125 – volume: 49 start-page: 1027 year: 2006 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0080 article-title: Comparison of heat transfer conditions in tube bundle cross-flow for different tube shapes publication-title: Int. J. Heat Mass Transf. doi: 10.1016/j.ijheatmasstransfer.2005.09.030 – volume: 125 year: 2019 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0225 article-title: Evolutionary design algorithm for optimal light trapping in solar cells publication-title: J. Appl. Phys. doi: 10.1063/1.5078745 – volume: 119 start-page: 742 year: 2018 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0025 article-title: Numerical analysis of forced convection of high-temperature exhaust gas around a metal-foam wrapped cylinder publication-title: Int. J. Heat Mass Transf. doi: 10.1016/j.ijheatmasstransfer.2017.11.057 – year: 1997 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0005 – volume: 131 start-page: 1147 year: 2019 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0050 article-title: Effect of shape modification on heat transfer and drag for fluid flow past a cam-shaped cylinder publication-title: Int. J. Heat Mass Transf. doi: 10.1016/j.ijheatmasstransfer.2018.11.057 – year: 2000 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0115 – volume: 39 start-page: 311 year: 1996 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0075 article-title: The optimal spacing of cylinders in free-stream cross-flow forced convection publication-title: Int. J. Heat Mass Transf. doi: 10.1016/0017-9310(95)00122-P – volume: 109 start-page: 222 year: 2017 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0155 article-title: Numerical evaluation of a solar chimney geometry for different ground temperatures by means of constructal design publication-title: Renew. Energy doi: 10.1016/j.renene.2017.03.007 – volume: 160 start-page: 1208 year: 2018 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0165 article-title: Thermodynamics today publication-title: Energy. doi: 10.1016/j.energy.2018.07.092 – volume: 42 start-page: 857 year: 2003 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0210 article-title: Designed porous media: optimally nonuniform flow structures connecting one point with more points publication-title: Int. J. Therm. Sci. doi: 10.1016/S1290-0729(03)00058-9 – volume: 102 start-page: 417 year: 2016 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0030 article-title: Fluid flow and heat transfer around a confined semi-circular cylinder: onset of vortex shedding and effects of Reynolds and Prandtl numbers publication-title: Int. J. Heat Mass Transf. doi: 10.1016/j.ijheatmasstransfer.2016.06.026 – volume: 39 start-page: 882 year: 2010 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0065 article-title: Numerical simulation of flow over three circular cylinders in equilateral arrangements at low Reynolds number by a second-order characteristic-based split finite element method publication-title: Comput. Fluids doi: 10.1016/j.compfluid.2010.01.002 – year: 2016 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0130 – volume: 48 start-page: 4300 year: 2005 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0175 article-title: Constructal multi-scale cylinders with natural convection publication-title: Int. J. Heat Mass Transf. doi: 10.1016/j.ijheatmasstransfer.2005.05.023 – start-page: 174 year: 2013 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0185 article-title: Constructal design of turbulent forced convective flows over a pair of circular cylinders – volume: 134 start-page: 200 year: 2018 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0230 article-title: Construction of conductive pathways using genetic algorithms and constructal theory publication-title: Int. J. Therm. Sci. doi: 10.1016/j.ijthermalsci.2018.08.013 – volume: 135 start-page: 117 year: 2019 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0055 article-title: Mixed convection heat transfer in a differentially heated cavity with two rotating cylinders publication-title: Int. J. Therm. Sci. doi: 10.1016/j.ijthermalsci.2018.07.020 – year: 2011 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0260 – volume: 28 start-page: 26 year: 2019 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0200 article-title: Constructal design of conductive asymmetric tri-forked pathways publication-title: J. Eng. Thermophys. doi: 10.1134/S181023281901003X – volume: 126 start-page: 118 year: 2018 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0220 article-title: A new constructal theory based algorithm applied to thermal problems publication-title: Int. J. Therm. Sci. doi: 10.1016/j.ijthermalsci.2017.12.023 – volume: 170 start-page: 185 year: 2017 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0070 article-title: Experimental study for the cross-flow around three cylinders in an isosceles right triangle configuration publication-title: J. Wind Eng. Ind. Aerodyn. doi: 10.1016/j.jweia.2017.08.013 – year: 1980 ident: 10.1016/j.icheatmasstransfer.2019.104458_bb0245 |
| SSID | ssj0001818 |
| Score | 2.336042 |
| Snippet | Present work performs a numerical study about the energy removal in a heated tubular array submitted to an external flow. Taking into account that a large... |
| SourceID | crossref elsevier |
| SourceType | Enrichment Source Index Database Publisher |
| StartPage | 104458 |
| SubjectTerms | Constructal Theory Deterministic algorithm Numerical Modeling Tube heat exchanger |
| Title | Thermal analysis of tubular arrangements submitted to external flow using constructal theory |
| URI | https://dx.doi.org/10.1016/j.icheatmasstransfer.2019.104458 |
| Volume | 111 |
| WOSCitedRecordID | wos000517659400017&url=https%3A%2F%2Fcvtisr.summon.serialssolutions.com%2F%23%21%2Fsearch%3Fho%3Df%26include.ft.matches%3Dt%26l%3Dnull%26q%3D |
| hasFullText | 1 |
| inHoldings | 1 |
| isFullTextHit | |
| isPrint | |
| journalDatabaseRights | – providerCode: PRVESC databaseName: ScienceDirect database customDbUrl: eissn: 1879-0178 dateEnd: 99991231 omitProxy: false ssIdentifier: ssj0001818 issn: 0735-1933 databaseCode: AIEXJ dateStart: 19950101 isFulltext: true titleUrlDefault: https://www.sciencedirect.com providerName: Elsevier |
| link | http://cvtisr.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwtV1da9swFBVZu431YWxdx_qxoYc9DIKNHX_IehohTdnGKIV2JQ8DI8kytGR2iZ2u9If19-3KkmxnHSNl7MUEObpYvidXR8q5Vwi9T3wvJx7NHCDDxIGA5zuMk9DhjKvamxEPGoHs-VdyfJzMZvRkMLizuTDXc1IUyc0NvfqvroY2cLZKnX2Au1uj0ACfwelwBbfDdV3HQ7BVFQC6ciP1kjdyU7ZYqGQCndZWwVR4USvGCfzTVoMe5vPy53BpcnFNeVklSLc5_C2VXd1LFP1Ek0Zjq6J889fED-Dn6igKIMidFPhEZotSSwnO3bFrmzM5nFYCYoxOT3Qn3Z2yGp6qE491_oR72N45LZe3WvFrDZldDFiyeq0iRAc7EkQOkMlgJTKbOKxjKywcQ13m_V7Y1zsQl65Sz7JaDcuOSon3qNt1Xa24_dtM2OoTrfTtMr1vMVUWU23xEdockYhCNN0cf57OvrQcAHhTwwHsqJ6iD52y8O9P-WeC1CM9Zy_Qc7NawWONspdoIItttNWrYbmNnjQaYlG9Qt8N8rBFHi5zbJCH-8jDLfJwXWL7TrBCHm6Qh3vIwxp5O-jb0fRs8skxh3c4IghHtZPxgMYMlhtckERmIs6EHI0YEGJGOU1YFGe-UEmqiccEsMycCT8WzOOxn0MHGrxGG0VZyDcI5zGEjSj0JWFxKGGKoRGDr3uChZR7NN9FH-0bS4WpbK8OWJmn6_pxF9HWwpWu8vKAvhPrpNSwVs1GU0Dn2lb2_uEJ9tGz7id1gDbAP_Iteiyu64tq8c5A8xdFGc1O |
| linkProvider | Elsevier |
| openUrl | ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Thermal+analysis+of+tubular+arrangements+submitted+to+external+flow+using+constructal+theory&rft.jtitle=International+communications+in+heat+and+mass+transfer&rft.au=Pedroti%2C+V.A.&rft.au=de+Escobar%2C+C.C.&rft.au=dos+Santos%2C+E.D.&rft.au=Souza%2C+J.A.&rft.date=2020-02-01&rft.issn=0735-1933&rft.volume=111&rft.spage=104458&rft_id=info:doi/10.1016%2Fj.icheatmasstransfer.2019.104458&rft.externalDBID=n%2Fa&rft.externalDocID=10_1016_j_icheatmasstransfer_2019_104458 |
| thumbnail_l | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=0735-1933&client=summon |
| thumbnail_m | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=0735-1933&client=summon |
| thumbnail_s | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=0735-1933&client=summon |