A multi-objective correction of machine settings considering loaded tooth contact performance in spiral bevel gears by nonlinear interval number optimization
•Relationships of loaded tooth contact performance items with respect to the machine settings.•Multi-objective correction of the optimal machine settings.•Nonlinear interval number optimization in correction process.•A multi-objective correction of machine setting considering the loaded tooth contac...
Saved in:
| Published in: | Mechanism and machine theory Vol. 113; pp. 85 - 108 |
|---|---|
| Main Authors: | , , , , |
| Format: | Journal Article |
| Language: | English |
| Published: |
Elsevier Ltd
01.07.2017
|
| Subjects: | |
| ISSN: | 0094-114X, 1873-3999 |
| Online Access: | Get full text |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Abstract | •Relationships of loaded tooth contact performance items with respect to the machine settings.•Multi-objective correction of the optimal machine settings.•Nonlinear interval number optimization in correction process.•A multi-objective correction of machine setting considering the loaded tooth contact performance
A novel multi-objective correction of machine settings correlating to the loaded tooth contact performance is proposed by nonlinear interval optimization algorithm for spiral bevel gears. There are three items, namely, the maximum contact pressure, the maximum loaded transmission error and the contact ratio, are set to provide a comprehensive evaluation of the gear tooth contact performance. A universal machine setting correction is first applied to identify an initial set of machine settings only considering the ease-off. Then, a basic flowchart of multi-objective machine setting correction is established by the initial universal machine setting correction and the next proportional modification considering loaded tooth contact performance. Finally, multi-objective correction based on the nonlinear interval number algorithm is performed to obtain the high tooth contact performance. In this process, there are two major parts: i) the function of loaded tooth contact performance items with respect to machine setting and load is obtained by applying a polynomial interpolation fitting, and ii) the multi-objective correction is established based on nonlinear interval number optimization considering the uncertainty which only exists in constraints. A numerical instance is provided to verify the validity of the proposed multi-objective correction. |
|---|---|
| AbstractList | •Relationships of loaded tooth contact performance items with respect to the machine settings.•Multi-objective correction of the optimal machine settings.•Nonlinear interval number optimization in correction process.•A multi-objective correction of machine setting considering the loaded tooth contact performance
A novel multi-objective correction of machine settings correlating to the loaded tooth contact performance is proposed by nonlinear interval optimization algorithm for spiral bevel gears. There are three items, namely, the maximum contact pressure, the maximum loaded transmission error and the contact ratio, are set to provide a comprehensive evaluation of the gear tooth contact performance. A universal machine setting correction is first applied to identify an initial set of machine settings only considering the ease-off. Then, a basic flowchart of multi-objective machine setting correction is established by the initial universal machine setting correction and the next proportional modification considering loaded tooth contact performance. Finally, multi-objective correction based on the nonlinear interval number algorithm is performed to obtain the high tooth contact performance. In this process, there are two major parts: i) the function of loaded tooth contact performance items with respect to machine setting and load is obtained by applying a polynomial interpolation fitting, and ii) the multi-objective correction is established based on nonlinear interval number optimization considering the uncertainty which only exists in constraints. A numerical instance is provided to verify the validity of the proposed multi-objective correction. |
| Author | Wan, Guoxin Zhong, Jue Zhou, Yuansheng Ding, Han Tang, Jinyuan |
| Author_xml | – sequence: 1 givenname: Han surname: Ding fullname: Ding, Han email: dinghan0204@163.com – sequence: 2 givenname: Jinyuan surname: Tang fullname: Tang, Jinyuan email: jytangcsu_312@163.com – sequence: 3 givenname: Yuansheng surname: Zhou fullname: Zhou, Yuansheng email: zyszby@hotmail.com – sequence: 4 givenname: Jue surname: Zhong fullname: Zhong, Jue – sequence: 5 givenname: Guoxin surname: Wan fullname: Wan, Guoxin |
| BookMark | eNqNkcFu1DAQhi1UJLaFd_CBa8I4zm5iqZe2ooBUiQtI3CzHHne9SuzV2F1peRfeFYdygVNPtjUzn-b_fMkuYorI2HsBrQCx-3BoF7T7xdh92WOic9uBGFroWoDdK7YR4yAbqZS6YBsA1TdC9D_esMucDwAwbHu5Yb9u-PI0l9Ck6YC2hBNym4jWa4o8eb7SQ0SesZQQH3MtxxwcUn3wORmHjpeUyn4tFGMLPyL5RIuJFnmIPB8DmZlPeMKZP6KhzKczr0nmijVUWwrSqXbEp2VC4ulYwhJ-mnWBt-y1N3PGd3_PK_b9_uO3u8_Nw9dPX-5uHhorJZRmsAZQKq_GUVp0Qtl-GJUw0HfdFodB7bAXAiZ0ftgab8etV250vusUGiOlvGLXz1xLKWdCr48UFkNnLUCvqvVB_6tar6o1dLqqruO3_43bUP4EKGTC_FLI_TMEa9BTQNLZBqwSXVi_Q7sUXgb6DdfKr3w |
| CitedBy_id | crossref_primary_10_1007_s12206_022_0631_7 crossref_primary_10_1016_j_ijmecsci_2018_11_014 crossref_primary_10_1016_j_mechmachtheory_2021_104596 crossref_primary_10_1016_j_jclepro_2021_129566 crossref_primary_10_3390_ma16114183 crossref_primary_10_1016_j_engfracmech_2025_111537 crossref_primary_10_1016_j_aei_2021_101305 crossref_primary_10_1016_j_apm_2021_11_014 crossref_primary_10_1177_09544089221113639 crossref_primary_10_1177_16878132221082849 crossref_primary_10_1016_j_mechmachtheory_2022_104884 crossref_primary_10_1016_j_mechmachtheory_2025_106148 crossref_primary_10_1016_j_ijmecsci_2023_108459 crossref_primary_10_1016_j_asoc_2018_05_047 crossref_primary_10_1016_j_ijheatmasstransfer_2021_121301 crossref_primary_10_1007_s12541_021_00584_0 crossref_primary_10_1016_j_simpat_2022_102566 crossref_primary_10_1016_j_rcim_2017_10_003 crossref_primary_10_1155_2017_6143054 crossref_primary_10_1016_j_mechmachtheory_2020_104028 crossref_primary_10_1016_j_jmapro_2020_02_035 crossref_primary_10_3390_ma11081301 crossref_primary_10_3390_s19071589 crossref_primary_10_1177_0954405420956767 crossref_primary_10_1016_j_mechmachtheory_2017_12_003 crossref_primary_10_1016_j_mechmachtheory_2019_103727 crossref_primary_10_1007_s11012_025_01970_y crossref_primary_10_1016_j_isatra_2021_11_036 crossref_primary_10_1016_j_asoc_2019_105600 crossref_primary_10_1016_j_ijmecsci_2019_105397 crossref_primary_10_1007_s40436_019_00286_x crossref_primary_10_1016_j_mechmachtheory_2018_11_013 crossref_primary_10_1016_j_mechmachtheory_2019_03_013 crossref_primary_10_1016_j_mechmachtheory_2021_104499 crossref_primary_10_1166_jmihi_2021_3690 crossref_primary_10_1177_1350650119866027 crossref_primary_10_1016_j_wear_2019_01_053 crossref_primary_10_1016_j_rcim_2018_05_004 crossref_primary_10_1016_j_tws_2021_108794 crossref_primary_10_3390_machines10100929 crossref_primary_10_1177_09544054211023625 crossref_primary_10_1016_j_measurement_2018_03_004 crossref_primary_10_1016_j_mechmachtheory_2024_105754 crossref_primary_10_1016_j_aei_2023_102098 crossref_primary_10_1016_j_ijmecsci_2022_107987 crossref_primary_10_1088_1742_6596_2853_1_012070 crossref_primary_10_1016_j_mechmachtheory_2022_104943 crossref_primary_10_1016_j_ymssp_2024_111434 crossref_primary_10_1177_1077546320959529 crossref_primary_10_1016_j_mechmachtheory_2018_08_009 crossref_primary_10_1016_j_mechmachtheory_2017_07_020 crossref_primary_10_3390_app12020822 crossref_primary_10_1016_j_mechmachtheory_2018_10_022 crossref_primary_10_1016_j_aei_2022_101697 crossref_primary_10_1166_jmihi_2021_3698 crossref_primary_10_1016_j_mechmachtheory_2022_105123 crossref_primary_10_1177_0954405420978039 crossref_primary_10_1016_j_advengsoft_2019_05_005 crossref_primary_10_3390_ma17051185 |
| Cites_doi | 10.1016/S0045-7825(01)00316-4 10.1016/j.ejor.2007.03.031 10.1115/1.3013844 10.1016/j.mechmachtheory.2016.11.007 10.1016/0045-7825(93)90018-S 10.1177/0954406215592922 10.1115/1.4005234 10.1115/1.2976454 10.1016/j.mechmachtheory.2011.05.002 10.1007/s12008-012-0163-y 10.1016/j.mechmachtheory.2012.10.005 10.1016/j.jmsy.2016.09.003 10.1177/0954405416640171 10.1016/j.mechmachtheory.2014.09.002 10.1115/1.4006002 10.1115/1.2898878 10.1115/1.4001485 10.1007/BF01203525 10.1016/j.cma.2008.04.027 10.1016/j.jmsy.2016.08.004 10.1006/mssp.2000.1379 10.1115/1.4000645 10.1115/1.1561044 10.1115/1.1286124 10.1115/1.4004546 10.1016/j.mechmachtheory.2010.03.010 10.2514/3.11967 10.1109/4235.985692 10.1115/1.4026264 10.1115/1.4027635 10.1115/1.4000646 10.1115/1.2168466 10.1115/1.2337316 10.1016/j.mechmachtheory.2016.01.008 10.1115/1.4006096 10.1016/j.cma.2007.03.024 10.1016/j.mechmachtheory.2009.03.009 |
| ContentType | Journal Article |
| Copyright | 2017 Elsevier Ltd |
| Copyright_xml | – notice: 2017 Elsevier Ltd |
| DBID | AAYXX CITATION |
| DOI | 10.1016/j.mechmachtheory.2017.02.006 |
| DatabaseName | CrossRef |
| DatabaseTitle | CrossRef |
| DatabaseTitleList | |
| DeliveryMethod | fulltext_linktorsrc |
| Discipline | Engineering |
| EISSN | 1873-3999 |
| EndPage | 108 |
| ExternalDocumentID | 10_1016_j_mechmachtheory_2017_02_006 S0094114X17302173 |
| GroupedDBID | --K --M -~X .~1 0R~ 1B1 1~. 1~5 29M 4.4 457 4G. 5GY 5VS 7-5 71M 8P~ 9JN AACTN AAEDT AAEDW AAIAV AAIKJ AAKOC AALRI AAOAW AAQFI AAQXK AAXUO ABFNM ABJNI ABMAC ABTAH ABXDB ABYKQ ACDAQ ACGFS ACNNM ACRLP ADBBV ADEZE ADMUD ADTZH AEBSH AECPX AEKER AENEX AFFNX AFKWA AFTJW AGHFR AGUBO AGYEJ AHHHB AHJVU AIEXJ AIKHN AITUG AJBFU AJOXV ALMA_UNASSIGNED_HOLDINGS AMFUW AMRAJ ASPBG AVWKF AXJTR AZFZN BJAXD BKOJK BLXMC CS3 EBS EFJIC EFLBG EJD EO8 EO9 EP2 EP3 FDB FEDTE FGOYB FIRID FNPLU FYGXN G-2 G-Q GBLVA HVGLF HZ~ IHE J1W JJJVA KOM LY7 M41 MO0 N9A O-L O9- OAUVE OZT P-8 P-9 P2P PC. Q38 R2- RIG ROL RPZ SDF SDG SES SET SEW SPC SPCBC SST SSZ T5K T9H TN5 TWZ WUQ XPP ZMT ZY4 ~G- 9DU AATTM AAXKI AAYWO AAYXX ABWVN ACLOT ACRPL ACVFH ADCNI ADNMO AEIPS AEUPX AFJKZ AFPUW AGQPQ AIGII AIIUN AKBMS AKRWK AKYEP ANKPU APXCP CITATION EFKBS ~HD |
| ID | FETCH-LOGICAL-c330t-7ca0e39f9883ced19c47891a04225e7796e4110bedf75afc85f9d8df229eaa333 |
| ISICitedReferencesCount | 61 |
| ISICitedReferencesURI | http://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=Summon&SrcAuth=ProQuest&DestLinkType=CitingArticles&DestApp=WOS_CPL&KeyUT=000401396700006&url=https%3A%2F%2Fcvtisr.summon.serialssolutions.com%2F%23%21%2Fsearch%3Fho%3Df%26include.ft.matches%3Dt%26l%3Dnull%26q%3D |
| ISSN | 0094-114X |
| IngestDate | Sat Nov 29 03:05:08 EST 2025 Tue Nov 18 22:34:11 EST 2025 Fri Feb 23 02:18:29 EST 2024 |
| IsPeerReviewed | true |
| IsScholarly | true |
| Keywords | Ease-off Multi-objective correction of machine setting Proportional modification Nonlinear interval optimization Spiral bevel gears Loaded tooth contact performance |
| Language | English |
| LinkModel | OpenURL |
| MergedId | FETCHMERGED-LOGICAL-c330t-7ca0e39f9883ced19c47891a04225e7796e4110bedf75afc85f9d8df229eaa333 |
| PageCount | 24 |
| ParticipantIDs | crossref_primary_10_1016_j_mechmachtheory_2017_02_006 crossref_citationtrail_10_1016_j_mechmachtheory_2017_02_006 elsevier_sciencedirect_doi_10_1016_j_mechmachtheory_2017_02_006 |
| PublicationCentury | 2000 |
| PublicationDate | July 2017 2017-07-00 |
| PublicationDateYYYYMMDD | 2017-07-01 |
| PublicationDate_xml | – month: 07 year: 2017 text: July 2017 |
| PublicationDecade | 2010 |
| PublicationTitle | Mechanism and machine theory |
| PublicationYear | 2017 |
| Publisher | Elsevier Ltd |
| Publisher_xml | – name: Elsevier Ltd |
| References | Jiang, Han, Liu (bib0030) 2008; 197 Simon (bib0015) 2011; 46 Wang (bib0027) 2003; 125 Gabiccini, Artoni, Guiggni (bib0011) 2012; 134 Jiang, Han, Liu (bib0041) 2008; 188 Simon (bib0014) 2014; 136 Artoni, Bracci, Gabiccini, Guiggiani (bib0018) 2009; 131 Gabiccini, Bracci, Guiggiani (bib0022) 2010; 132 Fan (bib0032) 2006; 128 Xu (bib0039) 1990 Litvin, Zhang, Krenzer (bib0002) 1993; 110 Shih, Chen (bib0012) 2012; 134 Jones (bib0021) 2001 Renaud, Gabriele (bib0028) 1994; 32 Simon (bib0003) 2014; 136 Fan (bib0010) 2011; 133 Jiang, Han, Liu (bib0037) 2007; 196 Jiang (bib0038) 2008 Artoni, Gabiccini, Kolivand (bib0004) 2013; 61 Ding, Tang, Zhong (bib0024) 2016; 41 Ding, Tang, Zhong, Wan, Zhou (bib0031) 2016; 230 Artoni, Kolivand, Kahraman (bib0019) 2010; 132 Shih (bib0013) 2010; 45 Artoni, Gabiccini, Guiggiani (bib0005) 2011; 133 Ding, Tang, Zhong, Zhou (bib0025) 2016; 41 Clerc (bib0042) 1999 Fan (bib0009) 2010; 132 Chen (bib0040) 2002 (bib0045) 2005 Zhou, Chen (bib0033) 2015; 83 Pantelides, Ganzerli (bib0036) 2001; 15 Argyris, Fuentes, Litvin (bib0001) 2002; 191 Litvin, Fuentes (bib0023) 2004 Ding, Tang, Zhong (bib0035) 2016; 99 Stadtfeld, Gaiser (bib0006) 2000; 122 Ding, Tang, Zhou, Cui (bib0026) 2016; 230 Clerc, Kennedy (bib0043) 2002; 6 Rodriguez, Renaud (bib0029) 1998; 15 Astoul, Geneix, Mermoz (bib0008) 2013; 7 Artoni, Gabiccini, Guiggni (bib0034) 2008; 130 Fan, DaFoe, Swanger (bib0016) 2008; 130 Stantfeld (bib0007) 2000 Ding, Zhou, Tang, Zhong, Zhou, Wan (bib0044) 2017; 109 Kolivand, Guiggiani (bib0020) 2009; 44 Wang, Fong (bib0017) 2006; 128 (10.1016/j.mechmachtheory.2017.02.006_bib0045) 2005 Artoni (10.1016/j.mechmachtheory.2017.02.006_bib0004) 2013; 61 Stadtfeld (10.1016/j.mechmachtheory.2017.02.006_bib0006) 2000; 122 Simon (10.1016/j.mechmachtheory.2017.02.006_bib0014) 2014; 136 Jiang (10.1016/j.mechmachtheory.2017.02.006_bib0030) 2008; 197 Argyris (10.1016/j.mechmachtheory.2017.02.006_bib0001) 2002; 191 Zhou (10.1016/j.mechmachtheory.2017.02.006_bib0033) 2015; 83 Fan (10.1016/j.mechmachtheory.2017.02.006_bib0009) 2010; 132 Gabiccini (10.1016/j.mechmachtheory.2017.02.006_bib0022) 2010; 132 Rodriguez (10.1016/j.mechmachtheory.2017.02.006_bib0029) 1998; 15 Xu (10.1016/j.mechmachtheory.2017.02.006_bib0039) 1990 Clerc (10.1016/j.mechmachtheory.2017.02.006_bib0042) 1999 Shih (10.1016/j.mechmachtheory.2017.02.006_bib0012) 2012; 134 Ding (10.1016/j.mechmachtheory.2017.02.006_bib0044) 2017; 109 Ding (10.1016/j.mechmachtheory.2017.02.006_bib0024) 2016; 41 Simon (10.1016/j.mechmachtheory.2017.02.006_bib0015) 2011; 46 Artoni (10.1016/j.mechmachtheory.2017.02.006_bib0018) 2009; 131 Jiang (10.1016/j.mechmachtheory.2017.02.006_bib0041) 2008; 188 Gabiccini (10.1016/j.mechmachtheory.2017.02.006_bib0011) 2012; 134 Ding (10.1016/j.mechmachtheory.2017.02.006_bib0031) 2016; 230 Litvin (10.1016/j.mechmachtheory.2017.02.006_bib0002) 1993; 110 Simon (10.1016/j.mechmachtheory.2017.02.006_bib0003) 2014; 136 Artoni (10.1016/j.mechmachtheory.2017.02.006_bib0019) 2010; 132 Pantelides (10.1016/j.mechmachtheory.2017.02.006_bib0036) 2001; 15 Stantfeld (10.1016/j.mechmachtheory.2017.02.006_bib0007) 2000 Astoul (10.1016/j.mechmachtheory.2017.02.006_bib0008) 2013; 7 Kolivand (10.1016/j.mechmachtheory.2017.02.006_bib0020) 2009; 44 Ding (10.1016/j.mechmachtheory.2017.02.006_bib0026) 2016; 230 Chen (10.1016/j.mechmachtheory.2017.02.006_bib0040) 2002 Fan (10.1016/j.mechmachtheory.2017.02.006_bib0016) 2008; 130 Ding (10.1016/j.mechmachtheory.2017.02.006_bib0035) 2016; 99 Artoni (10.1016/j.mechmachtheory.2017.02.006_bib0005) 2011; 133 Fan (10.1016/j.mechmachtheory.2017.02.006_bib0010) 2011; 133 Shih (10.1016/j.mechmachtheory.2017.02.006_bib0013) 2010; 45 Artoni (10.1016/j.mechmachtheory.2017.02.006_bib0034) 2008; 130 Jones (10.1016/j.mechmachtheory.2017.02.006_bib0021) 2001 Jiang (10.1016/j.mechmachtheory.2017.02.006_bib0037) 2007; 196 Litvin (10.1016/j.mechmachtheory.2017.02.006_bib0023) 2004 Jiang (10.1016/j.mechmachtheory.2017.02.006_bib0038) 2008 Wang (10.1016/j.mechmachtheory.2017.02.006_bib0017) 2006; 128 Ding (10.1016/j.mechmachtheory.2017.02.006_bib0025) 2016; 41 Clerc (10.1016/j.mechmachtheory.2017.02.006_bib0043) 2002; 6 Renaud (10.1016/j.mechmachtheory.2017.02.006_bib0028) 1994; 32 Wang (10.1016/j.mechmachtheory.2017.02.006_bib0027) 2003; 125 Fan (10.1016/j.mechmachtheory.2017.02.006_bib0032) 2006; 128 |
| References_xml | – year: 1990 ident: bib0039 article-title: Applied Multiobjective Optimization – volume: 7 start-page: 37 year: 2013 end-page: 49 ident: bib0008 article-title: A simple and robust method for spiral bevel gear generation and tooth contact analysis publication-title: Int. J. Interact. Des. Manuf. – volume: 109 start-page: 155 year: 2017 end-page: 170 ident: bib0044 article-title: A novel operation approach to determine initial contact point for tooth contact analysis with errors of spiral bevel and hypoid gears publication-title: Mech. Mach. Theory – volume: 41 start-page: 228 year: 2016 end-page: 238 ident: bib0025 article-title: A hybrid modification approach of machine-tool setting considering high tooth contact performance in spiral bevel and hypoid gears publication-title: J. Manuf. Syst. – volume: 125 start-page: 210 year: 2003 end-page: 220 ident: bib0027 article-title: Adaptive response surface method using inherited latin hypercube design points publication-title: ASME J. Mech. Des. – start-page: 1951 year: 1999 end-page: 1957 ident: bib0042 article-title: The swarm and queen: towards a deterministic and adaptive particle swarm optimization publication-title: Proceedings of the IEEE Congress on Evolutionary Computation – year: 2005 ident: bib0045 article-title: Design Manual for Bevel Gears – volume: 230 start-page: 1897 year: 2016 end-page: 1909 ident: bib0031 article-title: Simulation and optimization of computer numerical control-milling model for machining a spiral bevel gear with new tooth flank publication-title: Proc. IMechE Part B – volume: 132 year: 2010 ident: bib0009 article-title: Tooth surface error corrections for face-hobbed hypoid gears publication-title: ASME J. Mech. Des. – volume: 128 start-page: 1315 year: 2006 end-page: 1327 ident: bib0032 article-title: Computerized modeling and simulation of spiral bevel and hypoid gears manufactured by Gleason face hobbing process publication-title: ASME J. Mech. Des. – volume: 46 start-page: 1980 year: 2011 end-page: 1998 ident: bib0015 article-title: Influence of tooth modifications on tooth contact in face-hobbed spiral bevel gears publication-title: Mech. Mach. Theory – volume: 6 start-page: 58 year: 2002 end-page: 73 ident: bib0043 article-title: The particle swarm-explosion, stability, and convergence in a multidimensional complex space publication-title: IEEE Trans. Evol. Comput. – volume: 99 start-page: 155 year: 2016 end-page: 175 ident: bib0035 article-title: Accurate nonlinear modeling and computing of grinding machine settings modification considering spatial geometric errors for hypoid gears publication-title: Mech. Mach. Theory – volume: 136 year: 2014 ident: bib0003 article-title: Optimal tooth modifications in face-hobbed spiral bevel gears to reduce the influence of misalignments on elastohydrodynamic lubrication publication-title: ASME J. Mech. Des. – volume: 44 start-page: 1848 year: 2009 end-page: 1865 ident: bib0020 article-title: A load distribution model for hypoid gears using ease-off topography and shell theory publication-title: Mech. Mach. Theory – volume: 15 start-page: 141 year: 1998 end-page: 156 ident: bib0029 article-title: Convergence of trust region augmented Lagrangian methods using variable fidelity approximation data publication-title: Struct. Optim – volume: 130 year: 2008 ident: bib0016 article-title: Higher-order tooth flank form error correction for face-milled spiral bevel and hypoid Gears publication-title: ASME J. Mech. Des. – year: 2002 ident: bib0040 article-title: Optimization Theories and Algorithms – volume: 196 start-page: 4791 year: 2007 end-page: 4800 ident: bib0037 article-title: Optimization of structures with uncertain constraints based on convex model and satisfaction degree of interval, Comput publication-title: Methods Appl. Mech. Eng. – volume: 134 year: 2012 ident: bib0011 article-title: On the identification of machine settings for gear surface topography corrections (DETC2011-47727) publication-title: ASME J. Mech. Des. – volume: 41 start-page: 111 year: 2016 end-page: 119 ident: bib0024 article-title: An accurate model of high-performance manufacturing spiral bevel and hypoid gears based on machine setting modification publication-title: J. Manuf. Syst. – volume: 230 start-page: 2260 year: 2016 end-page: 2272 ident: bib0026 article-title: Tooth flank reconstruction and optimizations after simulation process modeling for the spiral bevel gear publication-title: Proc. IMechE Part C – volume: 130 year: 2008 ident: bib0034 article-title: Nonlinear identification of machine settings for flank form modifications in hypoid gears publication-title: ASME J. Mech. Des. – year: 2000 ident: bib0007 article-title: Advanced Bevel Gear Technology – volume: 133 year: 2011 ident: bib0010 article-title: Optimization of face cone element for spiral bevel and hypoid gears publication-title: ASME J. Mech. Des. – volume: 15 start-page: 499 year: 2001 end-page: 511 ident: bib0036 article-title: Comparison of fuzzy set and convex model theories in structural design publication-title: Mech. Syst. Signal. Process. – volume: 128 start-page: 457 year: 2006 end-page: 467 ident: bib0017 article-title: Fourth-order kinematic synthesis for Face-milling spiral bevel sears with Modified Radial Motion (MRM) correction publication-title: ASME J. Mech. Des. – volume: 132 year: 2010 ident: bib0022 article-title: Robust optimization of the load contact pattern in hypoid gears with uncertain misalignments publication-title: ASME J. Mech. Des. – year: 2001 ident: bib0021 article-title: Direct global optimization algorithm publication-title: Encyclopedia of Optimization – volume: 133 year: 2011 ident: bib0005 article-title: Multi-objective ease-off optimization of hypoid gears for their efficiency, noise, and durability performances publication-title: ASME J. Mech. Des. – volume: 132 year: 2010 ident: bib0019 article-title: An ease-off based optimization of the loaded transmission error of hypoid gears publication-title: ASME J. Mech. Des. – year: 2004 ident: bib0023 article-title: Gear Geometry and Applied Theory – year: 2008 ident: bib0038 article-title: Theories and Algorithms of Uncertain Optimization based on Interval – volume: 188 start-page: 1 year: 2008 end-page: 13 ident: bib0041 article-title: A nonlinear interval number programming method for uncertain optimization problems, Eur publication-title: J. Oper. Res. – volume: 131 year: 2009 ident: bib0018 article-title: Optimization of the loaded contact pattern in hypoid gears by automatic topography modification publication-title: ASME J. Mech. Des. – volume: 134 year: 2012 ident: bib0012 article-title: Free-from flank correction in helical gear grinding on a five-axis CNC gear profile grinding machine publication-title: ASME J. Manuf. Sci. E-T. – volume: 61 start-page: 84 year: 2013 end-page: 101 ident: bib0004 article-title: Ease-off based compensation of tooth surface deviations for spiral bevel and hypoid gears: only the pinion needs corrections publication-title: Mech. Mach. Theory – volume: 110 start-page: 39 year: 1993 end-page: 55 ident: bib0002 article-title: Computerized generation of surfaces with optimal approximation to idea surfaces publication-title: Comput. Methods Appl. Mech. Eng. – volume: 136 year: 2014 ident: bib0014 article-title: Manufacture of optimized face-hobbed spiral bevel gears on computer numerical control hypoid generator publication-title: ASME J. Mech. Des. – volume: 191 start-page: 1057 year: 2002 end-page: 1095 ident: bib0001 article-title: Computerized integrated approach for design and stress analysis of spiral bevel gears publication-title: Comput. Methods Appl. Mech. Eng. – volume: 45 start-page: 1108 year: 2010 end-page: 1124 ident: bib0013 article-title: A novel ease-off flank modification methodology for spiral bevel and hypoid gears publication-title: Mech. Mach. Theory – volume: 32 start-page: 198 year: 1994 end-page: 205 ident: bib0028 article-title: Improved coordination in nonhierarchic system optimization, publication-title: AIAA J. – volume: 197 start-page: 4250 year: 2008 end-page: 4265 ident: bib0030 article-title: A sequential nonlinear interval number programming method for uncertain structures publication-title: Comput. Methods Appl. Mech. Eng. – volume: 122 start-page: 317 year: 2000 end-page: 322 ident: bib0006 article-title: The ultimate motion graph publication-title: ASME J. Mech. Des. – volume: 83 start-page: 91 year: 2015 end-page: 108 ident: bib0033 article-title: A new geometric meshing theory for a closed-form vector representation of the face-milled generated gear tooth surface and its curvature analysis publication-title: Mec. Mach. Theory – volume: 191 start-page: 1057 year: 2002 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0001 article-title: Computerized integrated approach for design and stress analysis of spiral bevel gears publication-title: Comput. Methods Appl. Mech. Eng. doi: 10.1016/S0045-7825(01)00316-4 – volume: 188 start-page: 1 year: 2008 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0041 article-title: A nonlinear interval number programming method for uncertain optimization problems, Eur publication-title: J. Oper. Res. doi: 10.1016/j.ejor.2007.03.031 – volume: 131 year: 2009 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0018 article-title: Optimization of the loaded contact pattern in hypoid gears by automatic topography modification publication-title: ASME J. Mech. Des. doi: 10.1115/1.3013844 – volume: 109 start-page: 155 year: 2017 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0044 article-title: A novel operation approach to determine initial contact point for tooth contact analysis with errors of spiral bevel and hypoid gears publication-title: Mech. Mach. Theory doi: 10.1016/j.mechmachtheory.2016.11.007 – year: 2008 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0038 – volume: 110 start-page: 39 issue: 1 year: 1993 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0002 article-title: Computerized generation of surfaces with optimal approximation to idea surfaces publication-title: Comput. Methods Appl. Mech. Eng. doi: 10.1016/0045-7825(93)90018-S – volume: 230 start-page: 2260 year: 2016 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0026 article-title: Tooth flank reconstruction and optimizations after simulation process modeling for the spiral bevel gear publication-title: Proc. IMechE Part C doi: 10.1177/0954406215592922 – year: 2005 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0045 – volume: 133 year: 2011 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0005 article-title: Multi-objective ease-off optimization of hypoid gears for their efficiency, noise, and durability performances publication-title: ASME J. Mech. Des. doi: 10.1115/1.4005234 – volume: 130 year: 2008 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0034 article-title: Nonlinear identification of machine settings for flank form modifications in hypoid gears publication-title: ASME J. Mech. Des. doi: 10.1115/1.2976454 – volume: 46 start-page: 1980 year: 2011 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0015 article-title: Influence of tooth modifications on tooth contact in face-hobbed spiral bevel gears publication-title: Mech. Mach. Theory doi: 10.1016/j.mechmachtheory.2011.05.002 – year: 2000 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0007 – volume: 7 start-page: 37 year: 2013 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0008 article-title: A simple and robust method for spiral bevel gear generation and tooth contact analysis publication-title: Int. J. Interact. Des. Manuf. doi: 10.1007/s12008-012-0163-y – volume: 61 start-page: 84 year: 2013 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0004 article-title: Ease-off based compensation of tooth surface deviations for spiral bevel and hypoid gears: only the pinion needs corrections publication-title: Mech. Mach. Theory doi: 10.1016/j.mechmachtheory.2012.10.005 – volume: 41 start-page: 228 year: 2016 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0025 article-title: A hybrid modification approach of machine-tool setting considering high tooth contact performance in spiral bevel and hypoid gears publication-title: J. Manuf. Syst. doi: 10.1016/j.jmsy.2016.09.003 – volume: 230 start-page: 1897 year: 2016 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0031 article-title: Simulation and optimization of computer numerical control-milling model for machining a spiral bevel gear with new tooth flank publication-title: Proc. IMechE Part B doi: 10.1177/0954405416640171 – volume: 83 start-page: 91 year: 2015 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0033 article-title: A new geometric meshing theory for a closed-form vector representation of the face-milled generated gear tooth surface and its curvature analysis publication-title: Mec. Mach. Theory doi: 10.1016/j.mechmachtheory.2014.09.002 – volume: 134 year: 2012 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0011 article-title: On the identification of machine settings for gear surface topography corrections (DETC2011-47727) publication-title: ASME J. Mech. Des. doi: 10.1115/1.4006002 – start-page: 1951 year: 1999 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0042 article-title: The swarm and queen: towards a deterministic and adaptive particle swarm optimization – volume: 130 year: 2008 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0016 article-title: Higher-order tooth flank form error correction for face-milled spiral bevel and hypoid Gears publication-title: ASME J. Mech. Des. doi: 10.1115/1.2898878 – volume: 132 year: 2010 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0022 article-title: Robust optimization of the load contact pattern in hypoid gears with uncertain misalignments publication-title: ASME J. Mech. Des. doi: 10.1115/1.4001485 – volume: 15 start-page: 141 year: 1998 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0029 article-title: Convergence of trust region augmented Lagrangian methods using variable fidelity approximation data publication-title: Struct. Optim doi: 10.1007/BF01203525 – year: 1990 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0039 – volume: 197 start-page: 4250 year: 2008 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0030 article-title: A sequential nonlinear interval number programming method for uncertain structures publication-title: Comput. Methods Appl. Mech. Eng. doi: 10.1016/j.cma.2008.04.027 – year: 2001 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0021 article-title: Direct global optimization algorithm – year: 2004 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0023 – volume: 41 start-page: 111 year: 2016 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0024 article-title: An accurate model of high-performance manufacturing spiral bevel and hypoid gears based on machine setting modification publication-title: J. Manuf. Syst. doi: 10.1016/j.jmsy.2016.08.004 – volume: 15 start-page: 499 issue: 3 year: 2001 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0036 article-title: Comparison of fuzzy set and convex model theories in structural design publication-title: Mech. Syst. Signal. Process. doi: 10.1006/mssp.2000.1379 – volume: 132 year: 2010 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0019 article-title: An ease-off based optimization of the loaded transmission error of hypoid gears publication-title: ASME J. Mech. Des. doi: 10.1115/1.4000645 – volume: 125 start-page: 210 year: 2003 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0027 article-title: Adaptive response surface method using inherited latin hypercube design points publication-title: ASME J. Mech. Des. doi: 10.1115/1.1561044 – year: 2002 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0040 – volume: 122 start-page: 317 year: 2000 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0006 article-title: The ultimate motion graph publication-title: ASME J. Mech. Des. doi: 10.1115/1.1286124 – volume: 133 year: 2011 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0010 article-title: Optimization of face cone element for spiral bevel and hypoid gears publication-title: ASME J. Mech. Des. doi: 10.1115/1.4004546 – volume: 45 start-page: 1108 year: 2010 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0013 article-title: A novel ease-off flank modification methodology for spiral bevel and hypoid gears publication-title: Mech. Mach. Theory doi: 10.1016/j.mechmachtheory.2010.03.010 – volume: 32 start-page: 198 year: 1994 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0028 article-title: Improved coordination in nonhierarchic system optimization, publication-title: AIAA J. doi: 10.2514/3.11967 – volume: 6 start-page: 58 issue: 1 year: 2002 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0043 article-title: The particle swarm-explosion, stability, and convergence in a multidimensional complex space publication-title: IEEE Trans. Evol. Comput. doi: 10.1109/4235.985692 – volume: 136 year: 2014 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0003 article-title: Optimal tooth modifications in face-hobbed spiral bevel gears to reduce the influence of misalignments on elastohydrodynamic lubrication publication-title: ASME J. Mech. Des. doi: 10.1115/1.4026264 – volume: 136 year: 2014 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0014 article-title: Manufacture of optimized face-hobbed spiral bevel gears on computer numerical control hypoid generator publication-title: ASME J. Mech. Des. doi: 10.1115/1.4027635 – volume: 132 year: 2010 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0009 article-title: Tooth surface error corrections for face-hobbed hypoid gears publication-title: ASME J. Mech. Des. doi: 10.1115/1.4000646 – volume: 128 start-page: 457 year: 2006 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0017 article-title: Fourth-order kinematic synthesis for Face-milling spiral bevel sears with Modified Radial Motion (MRM) correction publication-title: ASME J. Mech. Des. doi: 10.1115/1.2168466 – volume: 128 start-page: 1315 year: 2006 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0032 article-title: Computerized modeling and simulation of spiral bevel and hypoid gears manufactured by Gleason face hobbing process publication-title: ASME J. Mech. Des. doi: 10.1115/1.2337316 – volume: 99 start-page: 155 year: 2016 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0035 article-title: Accurate nonlinear modeling and computing of grinding machine settings modification considering spatial geometric errors for hypoid gears publication-title: Mech. Mach. Theory doi: 10.1016/j.mechmachtheory.2016.01.008 – volume: 134 year: 2012 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0012 article-title: Free-from flank correction in helical gear grinding on a five-axis CNC gear profile grinding machine publication-title: ASME J. Manuf. Sci. E-T. doi: 10.1115/1.4006096 – volume: 196 start-page: 4791 year: 2007 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0037 article-title: Optimization of structures with uncertain constraints based on convex model and satisfaction degree of interval, Comput publication-title: Methods Appl. Mech. Eng. doi: 10.1016/j.cma.2007.03.024 – volume: 44 start-page: 1848 issue: 10 year: 2009 ident: 10.1016/j.mechmachtheory.2017.02.006_bib0020 article-title: A load distribution model for hypoid gears using ease-off topography and shell theory publication-title: Mech. Mach. Theory doi: 10.1016/j.mechmachtheory.2009.03.009 |
| SSID | ssj0007543 |
| Score | 2.422442 |
| Snippet | •Relationships of loaded tooth contact performance items with respect to the machine settings.•Multi-objective correction of the optimal machine... |
| SourceID | crossref elsevier |
| SourceType | Enrichment Source Index Database Publisher |
| StartPage | 85 |
| SubjectTerms | Ease-off Loaded tooth contact performance Multi-objective correction of machine setting Nonlinear interval optimization Proportional modification Spiral bevel gears |
| Title | A multi-objective correction of machine settings considering loaded tooth contact performance in spiral bevel gears by nonlinear interval number optimization |
| URI | https://dx.doi.org/10.1016/j.mechmachtheory.2017.02.006 |
| Volume | 113 |
| WOSCitedRecordID | wos000401396700006&url=https%3A%2F%2Fcvtisr.summon.serialssolutions.com%2F%23%21%2Fsearch%3Fho%3Df%26include.ft.matches%3Dt%26l%3Dnull%26q%3D |
| hasFullText | 1 |
| inHoldings | 1 |
| isFullTextHit | |
| isPrint | |
| journalDatabaseRights | – providerCode: PRVESC databaseName: Elsevier SD Freedom Collection Journals 2021 customDbUrl: eissn: 1873-3999 dateEnd: 99991231 omitProxy: false ssIdentifier: ssj0007543 issn: 0094-114X databaseCode: AIEXJ dateStart: 19950101 isFulltext: true titleUrlDefault: https://www.sciencedirect.com providerName: Elsevier |
| link | http://cvtisr.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwtV1bb9MwFLZKhxA8IK5i3OSHvUVBSZzUtnhAFRoaE0xIFFTxEjmJs7Vqk2lJp-3H8LP4PxzfkmyAVIR4iSo3Tmyfr-ccu985B6E9FjAeRXzi84IIP85J5GciS_yEsRIMNBeBznjz9QM9OmLzOf80Gv1wsTDnK1pV7OKCn_5XUUMbCFuFzv6FuLuHQgN8BqHDFcQO160EPzUkQb_OlkaZebmqwJE713Ct6ZPSa6SmPDeKeK5rdqpDg1UtCnBB27o2jPRWmNTGXXDBovL0f_MrL1N0I-8Ylq9RPmxlcm4oTqumUcIdptqIV4NWWttwz6Ev_FGqqGNXpMMNq3XJAox_bUuuHPQgntkT7sNFdbnpm7-d1BttT6CtOZHWIJsvbIeNHJ5xhLTjw9qDNxd80zOdtDLnsQ_bubkxZUZ_M0p88Ln4FQUfkoGKNhWCrLEPdVKJX-2IOdJYvlrDSqj5m7krJiA1KV6vpe_WDsFnNSI1oBDUJmz1yA20E9GEszHamb7fnx92LgJNLJ3TzuAW2uuJh39-5-99p4E_NLuH7tqNDJ4aAN5HI1k9QHcG6S0fou9TfA2KuIcirktsZY4dFPEAithAEWsoYgtFPIAiXlTYQBFrKGINRZxd4g6K2EERGyjiIRQfoS_v9mdvD3xbDsTPCQlan-YikISXnDGSyyLkeUwZD4XKYpdISvlEwuoHmSxKmogyZ0nJC1aUoIqkEISQx2gMA5BPEIYbZUyTrJgQGRel4NkEOoSspFTGkkW76LVb6DS3ufJVyZZV6kiRy_SqmFIlpjSIUhDTLkq63qcmZ8yW_d44mabW_zV-bQqw3OoJT__5Cc_Q7f4H-ByN27ONfIFu5uftojl7aXH8EzHz60w |
| linkProvider | Elsevier |
| openUrl | ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=A+multi-objective+correction+of+machine+settings+considering+loaded+tooth+contact+performance+in+spiral+bevel+gears+by+nonlinear+interval+number+optimization&rft.jtitle=Mechanism+and+machine+theory&rft.au=Ding%2C+Han&rft.au=Tang%2C+Jinyuan&rft.au=Zhou%2C+Yuansheng&rft.au=Zhong%2C+Jue&rft.date=2017-07-01&rft.pub=Elsevier+Ltd&rft.issn=0094-114X&rft.eissn=1873-3999&rft.volume=113&rft.spage=85&rft.epage=108&rft_id=info:doi/10.1016%2Fj.mechmachtheory.2017.02.006&rft.externalDocID=S0094114X17302173 |
| thumbnail_l | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=0094-114X&client=summon |
| thumbnail_m | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=0094-114X&client=summon |
| thumbnail_s | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=0094-114X&client=summon |