Effect of pitting defects on the buckling strength of thick-wall cylinder under axial compression
•The effect of pits on the collapse pressure of cylinder under axial compression was experimental and numerical studied.•A novel shell model with pitting defects was proposed.•Realistic pits can be simulated based on the user defined Python program.•The distribution of pit affects the bucking mode h...
Gespeichert in:
| Veröffentlicht in: | Construction & building materials Jg. 224; S. 226 - 241 |
|---|---|
| Hauptverfasser: | , , , , , , |
| Format: | Journal Article |
| Sprache: | Englisch |
| Veröffentlicht: |
Elsevier Ltd
10.11.2019
|
| Schlagworte: | |
| ISSN: | 0950-0618, 1879-0526 |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Abstract | •The effect of pits on the collapse pressure of cylinder under axial compression was experimental and numerical studied.•A novel shell model with pitting defects was proposed.•Realistic pits can be simulated based on the user defined Python program.•The distribution of pit affects the bucking mode hence govern the collapse pressure.•Volume loss is a good parameter to relate the collapse pressure and corrosion damage.
This paper is aimed at assessing the effects of uniformly and randomly distributed pitting defects on the collapse pressure (FCO) of thick-wall cylinder under axial compression, which is exposed to the marine splash zone. The buckling performance of locally corroded cylinder was experimental and numerical studied. The experimental program involved seamless stainless steel tubes (316L) with different size of pitting defects, which were simulated by cylindrical hole. The pitting defects were introduced into the outside surface of cylinder by milling and drilling, and then the buckling strength of such structure was obtained experimentally. The profile of cylinder was examined in details using RA7320 Portable Arm Coordinate Measuring Machine (PACMM), and the measured data was analyzed carefully. A novel shell model was also established by a user defined Python program, where both uniformly and randomly distributed pits can be considered and the computational efficiency was highly improved. After calibrated with the experiment results, the model was used to carry out a systematic parametric study. It indicated that the radial imperfection and out-of-straightness as well as pitting defects (pitting size, perforated or un-perforated and distribution pattern) are key parameters governing the collapse pressure of such cylinder, and the maximum cross sectional area loss or volume loss are good parameter to correlate the collapse pressure and pitting damage. For engineering practice, the uniformly distributed pits model is better due to the convenience and conservative point of view, and the computational cost is also lower. However, the randomly distributed pitting model is more realistic, and some special collapse mode can only be observed when the random nature was taken into account. |
|---|---|
| AbstractList | •The effect of pits on the collapse pressure of cylinder under axial compression was experimental and numerical studied.•A novel shell model with pitting defects was proposed.•Realistic pits can be simulated based on the user defined Python program.•The distribution of pit affects the bucking mode hence govern the collapse pressure.•Volume loss is a good parameter to relate the collapse pressure and corrosion damage.
This paper is aimed at assessing the effects of uniformly and randomly distributed pitting defects on the collapse pressure (FCO) of thick-wall cylinder under axial compression, which is exposed to the marine splash zone. The buckling performance of locally corroded cylinder was experimental and numerical studied. The experimental program involved seamless stainless steel tubes (316L) with different size of pitting defects, which were simulated by cylindrical hole. The pitting defects were introduced into the outside surface of cylinder by milling and drilling, and then the buckling strength of such structure was obtained experimentally. The profile of cylinder was examined in details using RA7320 Portable Arm Coordinate Measuring Machine (PACMM), and the measured data was analyzed carefully. A novel shell model was also established by a user defined Python program, where both uniformly and randomly distributed pits can be considered and the computational efficiency was highly improved. After calibrated with the experiment results, the model was used to carry out a systematic parametric study. It indicated that the radial imperfection and out-of-straightness as well as pitting defects (pitting size, perforated or un-perforated and distribution pattern) are key parameters governing the collapse pressure of such cylinder, and the maximum cross sectional area loss or volume loss are good parameter to correlate the collapse pressure and pitting damage. For engineering practice, the uniformly distributed pits model is better due to the convenience and conservative point of view, and the computational cost is also lower. However, the randomly distributed pitting model is more realistic, and some special collapse mode can only be observed when the random nature was taken into account. |
| Author | Yu, Jianxing Yu, Yang Xu, Weipeng Wang, Huakun Han, Mengxue Chen, Haicheng Wang, Zhaoyu |
| Author_xml | – sequence: 1 givenname: Huakun orcidid: 0000-0002-7640-9115 surname: Wang fullname: Wang, Huakun email: tjuwhk@tju.edu.cn organization: State Key Laboratory of Hydraulic Engineering Simulation and Safety, Tianjin University, Tianjin 300072, China – sequence: 2 givenname: Yang orcidid: 0000-0002-6708-9885 surname: Yu fullname: Yu, Yang email: yang.yu@tju.edu.cn organization: State Key Laboratory of Hydraulic Engineering Simulation and Safety, Tianjin University, Tianjin 300072, China – sequence: 3 givenname: Jianxing surname: Yu fullname: Yu, Jianxing organization: State Key Laboratory of Hydraulic Engineering Simulation and Safety, Tianjin University, Tianjin 300072, China – sequence: 4 givenname: Weipeng surname: Xu fullname: Xu, Weipeng organization: State Key Laboratory of Hydraulic Engineering Simulation and Safety, Tianjin University, Tianjin 300072, China – sequence: 5 givenname: Haicheng surname: Chen fullname: Chen, Haicheng organization: State Key Laboratory of Hydraulic Engineering Simulation and Safety, Tianjin University, Tianjin 300072, China – sequence: 6 givenname: Zhaoyu surname: Wang fullname: Wang, Zhaoyu organization: State Key Laboratory of Hydraulic Engineering Simulation and Safety, Tianjin University, Tianjin 300072, China – sequence: 7 givenname: Mengxue surname: Han fullname: Han, Mengxue organization: State Key Laboratory of Hydraulic Engineering Simulation and Safety, Tianjin University, Tianjin 300072, China |
| BookMark | eNqNUNtKAzEQDVLBtvoP8QN2TdLdzeZJpNQLFHzR55DNpU27TUqSqv17s9YH8akwzDBn5hxmzgSMnHcagFuMSoxwc7cppXfdwfZqJ1JJEGYlojmqCzDGLWUFqkkzAmPEalSgBrdXYBLjBiHUkIaMgVgYo2WC3sC9Tcm6FVR6QCL0Dqa1ht1BbvsBjylot0rrYTetrdwWn6LvoTzmqdIBHn6y-LIig363DzpG6901uDSij_rmt07B--Pibf5cLF-fXuYPy0LOCE5FrZg0WnV1baiRpG5NbjvSVrSlyNSsYUoKoXWnKsGoNLipaIVMNVMCEanobAruT7oy-BiDNlzaJFK-IAVhe44RHxzjG_7HMT44xhHNUWUF9k9hH-xOhONZ3PmJq_OLH1YHHqXVTmplQ3aTK2_PUPkGVmGT6w |
| CitedBy_id | crossref_primary_10_1016_j_jobe_2024_110358 crossref_primary_10_3390_ma18132934 crossref_primary_10_1016_j_engstruct_2024_118243 crossref_primary_10_1016_j_jcsr_2022_107247 crossref_primary_10_1016_j_apor_2024_104064 crossref_primary_10_1016_j_jngse_2020_103472 crossref_primary_10_1016_j_oceaneng_2023_115963 crossref_primary_10_1016_j_triboint_2023_109111 crossref_primary_10_1016_j_tws_2021_108336 crossref_primary_10_1016_j_tws_2021_108479 crossref_primary_10_1016_j_istruc_2024_105858 crossref_primary_10_3390_en14164866 crossref_primary_10_1007_s13344_025_0068_8 crossref_primary_10_1016_j_istruc_2024_106683 crossref_primary_10_1088_1742_6596_1676_1_012227 crossref_primary_10_1016_j_jksus_2021_101547 crossref_primary_10_1016_j_jcsr_2025_109800 crossref_primary_10_1016_j_marstruc_2022_103157 crossref_primary_10_1016_j_tws_2024_111594 crossref_primary_10_1016_j_conbuildmat_2025_143645 crossref_primary_10_1016_j_wear_2019_203043 crossref_primary_10_1016_j_jcsr_2024_108792 crossref_primary_10_1016_j_conbuildmat_2022_127038 crossref_primary_10_1016_j_tws_2021_108608 crossref_primary_10_1007_s12541_020_00443_4 crossref_primary_10_1016_j_conbuildmat_2025_141142 crossref_primary_10_1016_j_probengmech_2021_103161 crossref_primary_10_1016_j_istruc_2023_03_054 crossref_primary_10_1016_j_marstruc_2020_102805 crossref_primary_10_1016_j_oceaneng_2025_120801 crossref_primary_10_1016_j_oceaneng_2025_120723 crossref_primary_10_1007_s10853_023_08569_2 crossref_primary_10_3390_jmse10091325 crossref_primary_10_1016_j_tws_2019_106579 crossref_primary_10_1016_j_compstruc_2024_107597 crossref_primary_10_1016_j_jcsr_2021_107011 crossref_primary_10_3390_ma16186123 |
| Cites_doi | 10.1016/j.conbuildmat.2009.11.012 10.1016/j.tws.2008.02.005 10.1016/j.compstruct.2016.10.108 10.1016/j.tws.2018.04.015 10.1016/j.corsci.2014.04.043 10.1016/S0263-8231(98)00003-2 10.1016/j.jcsr.2014.04.015 10.1016/j.triboint.2019.05.019 10.1016/j.tws.2018.04.014 10.1016/j.tws.2016.12.017 10.1007/BF02330057 10.1016/j.conbuildmat.2016.11.037 10.1016/j.tws.2014.05.004 10.1016/j.corsci.2011.05.050 10.1016/j.jcsr.2014.10.020 10.1016/j.corsci.2013.07.002 10.1016/j.tws.2005.11.003 10.1016/j.corsci.2018.01.007 10.1016/j.jcsr.2018.02.003 10.1016/j.tws.2015.03.017 10.1007/BF03215830 10.1016/j.conbuildmat.2014.08.001 10.1016/j.tws.2015.10.027 10.2514/1.J053816 10.1016/j.tws.2014.11.009 10.1016/j.tws.2017.07.025 10.1016/j.marstruc.2017.10.010 10.1016/j.corsci.2006.05.049 10.1016/j.conbuildmat.2012.07.087 10.1016/j.ijimpeng.2016.05.014 10.1016/j.jcsr.2017.06.006 10.1016/j.tws.2015.07.024 10.1016/j.tws.2017.06.023 10.1016/j.corsci.2004.10.008 10.1016/j.compstruct.2017.02.031 10.1016/j.conbuildmat.2017.07.035 10.1016/j.tws.2017.08.008 10.1016/j.tws.2017.02.032 |
| ContentType | Journal Article |
| Copyright | 2019 Elsevier Ltd |
| Copyright_xml | – notice: 2019 Elsevier Ltd |
| DBID | AAYXX CITATION |
| DOI | 10.1016/j.conbuildmat.2019.07.074 |
| DatabaseName | CrossRef |
| DatabaseTitle | CrossRef |
| DatabaseTitleList | |
| DeliveryMethod | fulltext_linktorsrc |
| Discipline | Engineering |
| EISSN | 1879-0526 |
| EndPage | 241 |
| ExternalDocumentID | 10_1016_j_conbuildmat_2019_07_074 S0950061819317477 |
| GroupedDBID | --K --M .~1 0R~ 1B1 1~. 1~5 29F 4.4 457 4G. 5GY 5VS 6J9 7-5 71M 8P~ 9JN AABNK AABXZ AACTN AAEDT AAEDW AAEPC AAIAV AAIKJ AAKOC AALRI AAOAW AAQFI AAXUO ABFRF ABJNI ABMAC ABXRA ABYKQ ACDAQ ACGFO ACGFS ACRLP ADBBV ADEZE ADHUB ADTZH AEBSH AECPX AEFWE AEKER AENEX AEZYN AFKWA AFRZQ AFTJW AGHFR AGUBO AGYEJ AHHHB AHJVU AIEXJ AIKHN AITUG AJOXV ALMA_UNASSIGNED_HOLDINGS AMFUW AMRAJ AXJTR BAAKF BJAXD BKOJK BLXMC CS3 DU5 EBS EFJIC EFLBG EJD EO8 EO9 EP2 EP3 FDB FIRID FNPLU FYGXN G-Q GBLVA IAO IEA IGG IHE IHM IOF ISM J1W JJJVA KOM LY7 M24 M41 MAGPM MO0 N95 N9A O-L O9- OAUVE OZT P-8 P-9 P2P PC. PV9 Q38 RIG ROL RPZ RZL SDF SDG SES SPC SPCBC SSM SST SSZ T5K UNMZH XI7 ~G- 9DU AAQXK AATTM AAXKI AAYWO AAYXX ABFNM ABWVN ABXDB ACLOT ACNNM ACRPL ACVFH ADCNI ADMUD ADNMO AEIPS AEUPX AFJKZ AFPUW AHDLI AI. AIGII AIIUN AKBMS AKRWK AKYEP ANKPU APXCP ASPBG AVWKF AZFZN BAIFH BBTPI CITATION EFKBS FEDTE FGOYB G-2 HVGLF HZ~ ITC R2- RNS SET SEW SMS VH1 WUQ ZMT ~HD |
| ID | FETCH-LOGICAL-c321t-5d9cfedb55f7fc258fcfeb2847870f5969dcaaeebd4a97cf164740f43da02cd73 |
| ISICitedReferencesCount | 39 |
| ISICitedReferencesURI | http://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=Summon&SrcAuth=ProQuest&DestLinkType=CitingArticles&DestApp=WOS_CPL&KeyUT=000487572800021&url=https%3A%2F%2Fcvtisr.summon.serialssolutions.com%2F%23%21%2Fsearch%3Fho%3Df%26include.ft.matches%3Dt%26l%3Dnull%26q%3D |
| ISSN | 0950-0618 |
| IngestDate | Tue Nov 18 22:17:17 EST 2025 Sat Nov 29 07:05:56 EST 2025 Fri Feb 23 02:17:35 EST 2024 |
| IsPeerReviewed | true |
| IsScholarly | true |
| Keywords | Cylinder Pitting corrosion Axial compression Buckling |
| Language | English |
| LinkModel | OpenURL |
| MergedId | FETCHMERGED-LOGICAL-c321t-5d9cfedb55f7fc258fcfeb2847870f5969dcaaeebd4a97cf164740f43da02cd73 |
| ORCID | 0000-0002-6708-9885 0000-0002-7640-9115 |
| PageCount | 16 |
| ParticipantIDs | crossref_citationtrail_10_1016_j_conbuildmat_2019_07_074 crossref_primary_10_1016_j_conbuildmat_2019_07_074 elsevier_sciencedirect_doi_10_1016_j_conbuildmat_2019_07_074 |
| PublicationCentury | 2000 |
| PublicationDate | 2019-11-10 |
| PublicationDateYYYYMMDD | 2019-11-10 |
| PublicationDate_xml | – month: 11 year: 2019 text: 2019-11-10 day: 10 |
| PublicationDecade | 2010 |
| PublicationTitle | Construction & building materials |
| PublicationYear | 2019 |
| Publisher | Elsevier Ltd |
| Publisher_xml | – name: Elsevier Ltd |
| References | Hao, Wang, Tian, Kaifan, Zhang (b0215) 2015; 93 Vaza, Cyrino, Hernández, Zegarra, Martinez, Liang (b0220) 2018; 58 Sun (b0190) 2018 Hao, Wang, Li, Meng, Tian, Tang (b0200) 2014; 82 Toda (b0225) 1983; 23 Wang, Yu, Yu, Duan, Yu Zhang, Li (b0085) 2018; 127 European Committee for Standardization, Eurocode 3: Design of Steel Structures, Part 1–6: Strength and Stability of Shell Structures, 2006. Yu, Wang, Fan, Yu (b0080) 2017; 119 Ghazijahani, Jiao, Holloway (b0160) 2015; 105 Yu, Jin, Yu, Wang, Tan (b0050) 2019 Wang, Wharton, Shenoi (b0030) 2014; 86 Wang, Xu, Wang, Li (b0075) 2017; 152 Karagah, Cheng, Dawood, Belarbi (b0010) 2015; 87 Akrami, Erfani (b0140) 2017; 119 Talebi, Zeinoddini, Mo'Tamedi, Zandi (b0015) 2018; 144 Fan, Yu, Sun, Wang (b0035) 2017; 116 Peterson, Seide, Weingarten (b0130) 1968 Yu, Wang, Yu, Luo, Liu, Wang (b0005) 2018; 133C Jullien, Limam (b0230) 1998; 31 D.N. Veritas, Recommended practice DNV-RP-F101 corroded pipelines, 11; 2015. Hovik, Norway. Hao, Wang, Li (b0210) 2015; 53 Ifayefunmi (b0100) 2016; 98 Apostolopoulos, Demis, Papadakis (b0055) 2013; 38 Horner, Connolly, Zhou, Crocker, Turnbull (b0265) 2011; 53 Rajabipour, Melchers (b0185) 2013; 76 Malumbela, Alexander, Moyo (b0060) 2010; 24 Dong (b0245) 2005 Alsalah, Holloway, Ghazijahani (b0170) 2017; 137 Komazaki, Kobayashi, Misawa, Fukuzumi (b0260) 2005; 47 Shariati, Rokhi (b0155) 2010; 10 Tang, Lin, Chen, Yi (b0065) 2014; 70 Dimopoulos, Gantes (b0175) 2015; 96 Shariati, Mahdizadeh Rokhi (b0150) 2008; 46 GB/T 228.1-2010. Metallic materials—Tensile testing—Part 1: Method of test at room temperature (ISO 6892-1:2009, MOD). 2011. Sheng, Xia (b0070) 2017; 131 Institute (b0020) 2012 ABAQUS, User's Manual: Version 6.12, Simulia, United States, 2013. Wagner, Hühne, Niemann, Khakimova (b0115) 2017; 115 Wagner, Hühne, Niemann (b0205) 2017; 173 Southwell (b0095) 1914; 213 Wang, Yang, Yu, Jin, Zhao, Fan, Zhang (b0090) 2018; 129 Han, Cheng, Taheri, Pegg (b0145) 2006; 44 C. Hühne, R. Rolfes, J. Teßmer, A new approach for robust design of composite cylindrical shells under axial compression. In: Proceedings of the European conference on spacecraft structures. Yu, Jin, Wang, Yu, Tan (b0045) 2019 Yılmaza, Kocabaş, Özyurt (b0165) 2017; 119 Arbocz (b0125) 1982 Wang, Yu, Yu, Wang, Li (b0040) 2019; 137 Ravi Sankar, Parameswaran (b0180) 2016; 96 Ghazijahani, Jiao, Holloway (b0235) 2014; 100 Shariati, Sedighi, Saemi, Eipakchi, Allahbakhsh (b0105) 2010; 84 Valor, Caleyo, Alfonso, Rivas, Hallen (b0270) 2007; 49 Wagner, Hühne, Rohwer, Niemann, Wiedemann (b0135) 2017; 160 Koiter (b0120) 1963; 66 Teng, Rotter (b0110) 2004 Sun (10.1016/j.conbuildmat.2019.07.074_b0190) 2018 Rajabipour (10.1016/j.conbuildmat.2019.07.074_b0185) 2013; 76 Talebi (10.1016/j.conbuildmat.2019.07.074_b0015) 2018; 144 Teng (10.1016/j.conbuildmat.2019.07.074_b0110) 2004 Valor (10.1016/j.conbuildmat.2019.07.074_b0270) 2007; 49 Alsalah (10.1016/j.conbuildmat.2019.07.074_b0170) 2017; 137 Han (10.1016/j.conbuildmat.2019.07.074_b0145) 2006; 44 Yu (10.1016/j.conbuildmat.2019.07.074_b0045) 2019 Institute (10.1016/j.conbuildmat.2019.07.074_b0020) 2012 10.1016/j.conbuildmat.2019.07.074_b0025 Dimopoulos (10.1016/j.conbuildmat.2019.07.074_b0175) 2015; 96 Wagner (10.1016/j.conbuildmat.2019.07.074_b0115) 2017; 115 Hao (10.1016/j.conbuildmat.2019.07.074_b0215) 2015; 93 Shariati (10.1016/j.conbuildmat.2019.07.074_b0105) 2010; 84 Horner (10.1016/j.conbuildmat.2019.07.074_b0265) 2011; 53 Hao (10.1016/j.conbuildmat.2019.07.074_b0200) 2014; 82 Ghazijahani (10.1016/j.conbuildmat.2019.07.074_b0160) 2015; 105 Koiter (10.1016/j.conbuildmat.2019.07.074_b0120) 1963; 66 Ifayefunmi (10.1016/j.conbuildmat.2019.07.074_b0100) 2016; 98 Yu (10.1016/j.conbuildmat.2019.07.074_b0005) 2018; 133C Tang (10.1016/j.conbuildmat.2019.07.074_b0065) 2014; 70 10.1016/j.conbuildmat.2019.07.074_b0250 Wang (10.1016/j.conbuildmat.2019.07.074_b0030) 2014; 86 Shariati (10.1016/j.conbuildmat.2019.07.074_b0155) 2010; 10 10.1016/j.conbuildmat.2019.07.074_b0255 Jullien (10.1016/j.conbuildmat.2019.07.074_b0230) 1998; 31 Yu (10.1016/j.conbuildmat.2019.07.074_b0050) 2019 Vaza (10.1016/j.conbuildmat.2019.07.074_b0220) 2018; 58 Dong (10.1016/j.conbuildmat.2019.07.074_b0245) 2005 Wang (10.1016/j.conbuildmat.2019.07.074_b0090) 2018; 129 Yılmaza (10.1016/j.conbuildmat.2019.07.074_b0165) 2017; 119 Ghazijahani (10.1016/j.conbuildmat.2019.07.074_b0235) 2014; 100 Yu (10.1016/j.conbuildmat.2019.07.074_b0080) 2017; 119 Karagah (10.1016/j.conbuildmat.2019.07.074_b0010) 2015; 87 Toda (10.1016/j.conbuildmat.2019.07.074_b0225) 1983; 23 10.1016/j.conbuildmat.2019.07.074_b0240 Peterson (10.1016/j.conbuildmat.2019.07.074_b0130) 1968 Arbocz (10.1016/j.conbuildmat.2019.07.074_b0125) 1982 Fan (10.1016/j.conbuildmat.2019.07.074_b0035) 2017; 116 Hao (10.1016/j.conbuildmat.2019.07.074_b0210) 2015; 53 Wang (10.1016/j.conbuildmat.2019.07.074_b0085) 2018; 127 Southwell (10.1016/j.conbuildmat.2019.07.074_b0095) 1914; 213 Wang (10.1016/j.conbuildmat.2019.07.074_b0075) 2017; 152 Shariati (10.1016/j.conbuildmat.2019.07.074_b0150) 2008; 46 Ravi Sankar (10.1016/j.conbuildmat.2019.07.074_b0180) 2016; 96 Wagner (10.1016/j.conbuildmat.2019.07.074_b0205) 2017; 173 Malumbela (10.1016/j.conbuildmat.2019.07.074_b0060) 2010; 24 Akrami (10.1016/j.conbuildmat.2019.07.074_b0140) 2017; 119 Apostolopoulos (10.1016/j.conbuildmat.2019.07.074_b0055) 2013; 38 Wagner (10.1016/j.conbuildmat.2019.07.074_b0135) 2017; 160 Sheng (10.1016/j.conbuildmat.2019.07.074_b0070) 2017; 131 Komazaki (10.1016/j.conbuildmat.2019.07.074_b0260) 2005; 47 10.1016/j.conbuildmat.2019.07.074_b0195 Wang (10.1016/j.conbuildmat.2019.07.074_b0040) 2019; 137 |
| References_xml | – volume: 119 start-page: 727 year: 2017 end-page: 736 ident: b0080 article-title: Computation of plastic collapse capacity of 2D ring with random pitting corrosion defect publication-title: Thin-Wall Struct. – reference: European Committee for Standardization, Eurocode 3: Design of Steel Structures, Part 1–6: Strength and Stability of Shell Structures, 2006. – volume: 66 start-page: 265 year: 1963 end-page: 279 ident: b0120 article-title: The effect ofaxisymmetric imperfections on the buckling of cylindrical shells under axial compression publication-title: Proe. Koninklijke Nederlandse Akademie van Wetensehappen. – volume: 44 start-page: 254 year: 2006 end-page: 270 ident: b0145 article-title: Numerical and experimental investigations of the response of aluminum cylinders with a cutout subject to axial compression publication-title: Thin-Walled Struct. – volume: 137 start-page: 387 year: 2019 end-page: 404 ident: b0040 article-title: Development of erosion equation and numerical simulation methods with the consideration of applied stress publication-title: Tribol. Int. – volume: 70 start-page: 104 year: 2014 end-page: 117 ident: b0065 article-title: Three-dimensional corrosion pit measurement and statistical mechanical degradation analysis of deformed steel bars subjected to accelerated corrosion publication-title: Constr. Build. Mater. – volume: 129 start-page: 527 year: 2018 end-page: 541 ident: b0090 article-title: Effect of 3D random pitting defects on the collapse pressure of pipe — part II: numerical analysis publication-title: Thin-Wall Struct. – volume: 49 start-page: 559 year: 2007 end-page: 579 ident: b0270 article-title: Stochastic modeling of pitting corrosion: a new model for initiation and growth of multiple corrosion pits publication-title: Corros. Sci. – volume: 84 start-page: 12 year: 2010 end-page: 19 ident: b0105 article-title: Numerical and experimental investigation on ultimate strength of cracked cylindrical shells subjected to combined loading publication-title: Mechanika – reference: D.N. Veritas, Recommended practice DNV-RP-F101 corroded pipelines, 11; 2015. Hovik, Norway. – volume: 137 start-page: 169 year: 2017 end-page: 179 ident: b0170 article-title: Recovery of capacity lost due to openings in cylindrical shells under compression publication-title: J. Constr. Steel Res. – volume: 96 start-page: 11 year: 2015 end-page: 28 ident: b0175 article-title: Numerical methods for the design of cylindrical steel shells with unreinforced or reinforced cutouts publication-title: Thin-Walled Struct. – volume: 76 start-page: 292 year: 2013 end-page: 301 ident: b0185 article-title: A numerical study of damage caused by combined pitting corrosion and axial stress in steel pipes publication-title: Corros. Sci. – volume: 116 start-page: 19 year: 2017 end-page: 25 ident: b0035 article-title: On the effect of axial length parameters of ovality on the collapse pressure of pipelines publication-title: Thin-Wall Struct. – year: 2012 ident: b0020 article-title: Manual for determining the remaining strength of corroded pipelines: a supplement to ASME B31 code for pressure piping publication-title: Am. Soc. Mech. Eng. – volume: 87 start-page: 191 year: 2015 end-page: 199 ident: b0010 article-title: Experimental investigation of short steel columns with localized corrosion publication-title: Thin-Walled Struct. – volume: 173 start-page: 281 year: 2017 end-page: 303 ident: b0205 article-title: Robust knockdown factors for the design of axially loaded cylindrical and conical composite shells – development and validation publication-title: Compos. Struct. – year: 2018 ident: b0190 publication-title: Corros. Sci. – reference: GB/T 228.1-2010. Metallic materials—Tensile testing—Part 1: Method of test at room temperature (ISO 6892-1:2009, MOD). 2011. – year: 2019 ident: b0050 article-title: Research of plastic collapse capacity of 2D ring with internal random pitting corrosion defects publication-title: J. Tianjin Univ. (Sci. Technol.) – volume: 38 start-page: 139 year: 2013 end-page: 146 ident: b0055 article-title: Chloride-induced corrosion of steel reinforcement – mechanical performance and pit depth analysis publication-title: Constr. Build. Mater. – volume: 100 start-page: 12 year: 2014 end-page: 20 ident: b0235 article-title: Influence of a cutout on circular steel hollow sections under cyclic loading publication-title: J. Constr. Steel Res. – year: 1982 ident: b0125 article-title: The Imperfections Data Bank, a Means to Obtain Realistic Buckling Loads – volume: 127 start-page: 512 year: 2018 end-page: 526 ident: b0085 article-title: Effect of 3D random pitting defects on the collapse pressure of pipe — part I: experiment publication-title: Thin-Wall Struct. – volume: 31 start-page: 187 year: 1998 end-page: 202 ident: b0230 article-title: Effect of openings on the buckling of cylindrical shells subjected to axial compression publication-title: Thin Wall Struct. – volume: 105 start-page: 129 year: 2015 end-page: 137 ident: b0160 article-title: Structural behavior of shells with different cutouts under compression: an experimental study publication-title: J. Constr. Steel Res. – volume: 213 start-page: 187 year: 1914 end-page: 244 ident: b0095 article-title: On the general theory of elastic stability publication-title: Philos. Trans. R. Soc. Lond. Ser. A, Pap. A Math. Phys. Charact. – volume: 24 start-page: 1051 year: 2010 end-page: 1059 ident: b0060 article-title: Variation of steel loss and its effect on the ultimate flexural capacity of RC beams corroded and repaired under load publication-title: Constr. Build. Mater. – volume: 86 start-page: 42 year: 2014 end-page: 60 ident: b0030 article-title: Ultimate strength analysis of aged steel-plated structures exposed to marine corrosion damage: a review publication-title: Corros. Sci. – year: 1968 ident: b0130 article-title: Buckling of Thin-walled Circular Cylinders – NASA SP-8007 – volume: 23 start-page: 414 year: 1983 end-page: 417 ident: b0225 article-title: Buckling of cylinders with cutouts under axial compression publication-title: Exp. Mech. – volume: 98 start-page: 558 year: 2016 end-page: 564 ident: b0100 article-title: Buckling behavior of axially compressed cylindrical shells: comparison of theoretical and experimental data publication-title: Thin-Walled Struct. – reference: ABAQUS, User's Manual: Version 6.12, Simulia, United States, 2013. – volume: 82 start-page: 321 year: 2014 end-page: 330 ident: b0200 article-title: Worst multiple perturbation load approach of stiffened shells with and without cutouts for improved knockdown factors publication-title: Thin-Walled Struct. – volume: 133C start-page: 276 year: 2018 end-page: 287 ident: b0005 article-title: Corrosion behavior of X65 pipeline steel: comparison of wet-dry cycle and full immersion publication-title: Corros. Sci. – year: 2004 ident: b0110 article-title: Buckling of Thin Metal Shells – volume: 47 start-page: 2450 year: 2005 end-page: 2460 ident: b0260 article-title: Environmental embrittlement of automobile spring steels caused by wet-dry cyclic corrosion in sodium chloride solution publication-title: Corros. Sci. – volume: 115 start-page: 154 year: 2017 end-page: 162 ident: b0115 article-title: Robust design criterion for axially loaded cylindrical shells – simulation and validation publication-title: Thin-Walled Struct. – volume: 119 start-page: 457 year: 2017 end-page: 469 ident: b0140 article-title: An analytical and numerical study on the buckling of cracked cylindrical shells publication-title: Thin-Walled Struct. – volume: 46 start-page: 1251 year: 2008 end-page: 1261 ident: b0150 article-title: Numerical and experimental investigations on buckling of steel cylindrical shells with elliptical cutout subject to axial compression publication-title: Thin-Walled Struct. – volume: 93 start-page: 177 year: 2015 end-page: 187 ident: b0215 article-title: Influence of imperfection distributions for cylindrical stiffened shells with weld lands publication-title: Thin-Walled Struct. – volume: 144 start-page: 253 year: 2018 end-page: 269 ident: b0015 article-title: Collapse of HSLA steel pipes under corrosion exposure and uniaxial inelastic cycling publication-title: J. Constr. Steel Res. – volume: 58 start-page: 1 year: 2018 end-page: 17 ident: b0220 article-title: Experimental and numerical analyses of the ultimate compressive strength of perforated offshore tubular members publication-title: Mar. Struct. – volume: 119 start-page: 868 year: 2017 end-page: 878 ident: b0165 article-title: Empirical equations to estimate non-linear collapse of medium-length cylindrical shells with circular cutouts publication-title: Thin-Walled Struct. – volume: 160 start-page: 1095 year: 2017 end-page: 1104 ident: b0135 article-title: Stimulating the realistic worst case buckling scenario of axially compressed unstiffened cylindrical composite shells publication-title: Compos. Struct. – year: 2019 ident: b0045 article-title: Research of collapse pressure of 90° elbow with internal erosion-corrosion damage publication-title: J. Tianjin Univ. (Sci. Technol.) – volume: 53 start-page: 2878 year: 2015 end-page: 2889 ident: b0210 article-title: Hybrid framework for reliability-based design optimization of imperfect stiffened shells publication-title: AIAA J. – volume: 152 start-page: 777 year: 2017 end-page: 793 ident: b0075 article-title: Predicting the residual strength and deformability of corroded steel plate based on the corrosion morphology publication-title: Constr. Build. Mater. – volume: 10 start-page: 193 year: 2010 end-page: 205 ident: b0155 article-title: Buckling of steel cylindrical shells with an elliptical cutout publication-title: Int. J. Steel Struct. – volume: 96 start-page: 129 year: 2016 end-page: 145 ident: b0180 article-title: Effect of multiple holes on dynamic buckling of stubby shells: an experimental and numerical investigation publication-title: Int. J. Impact Eng. – volume: 131 start-page: 90 year: 2017 end-page: 100 ident: b0070 article-title: Effect of simulated pitting corrosion on the tensile properties of steel publication-title: Constr. Build. Mater. – volume: 53 start-page: 3466 year: 2011 end-page: 3485 ident: b0265 article-title: Novel images of the evolution of stress corrosion cracks from corrosion pits publication-title: Corros. Sci. – reference: C. Hühne, R. Rolfes, J. Teßmer, A new approach for robust design of composite cylindrical shells under axial compression. In: Proceedings of the European conference on spacecraft structures. – start-page: 12 year: 2005 ident: b0245 article-title: Wave Loads and Response of the Oil-Extraction Platform in Deep Ocen – volume: 24 start-page: 1051 issue: 6 year: 2010 ident: 10.1016/j.conbuildmat.2019.07.074_b0060 article-title: Variation of steel loss and its effect on the ultimate flexural capacity of RC beams corroded and repaired under load publication-title: Constr. Build. Mater. doi: 10.1016/j.conbuildmat.2009.11.012 – ident: 10.1016/j.conbuildmat.2019.07.074_b0255 – volume: 66 start-page: 265 issue: B year: 1963 ident: 10.1016/j.conbuildmat.2019.07.074_b0120 article-title: The effect ofaxisymmetric imperfections on the buckling of cylindrical shells under axial compression publication-title: Proe. Koninklijke Nederlandse Akademie van Wetensehappen. – volume: 46 start-page: 1251 year: 2008 ident: 10.1016/j.conbuildmat.2019.07.074_b0150 article-title: Numerical and experimental investigations on buckling of steel cylindrical shells with elliptical cutout subject to axial compression publication-title: Thin-Walled Struct. doi: 10.1016/j.tws.2008.02.005 – volume: 213 start-page: 187 year: 1914 ident: 10.1016/j.conbuildmat.2019.07.074_b0095 article-title: On the general theory of elastic stability publication-title: Philos. Trans. R. Soc. Lond. Ser. A, Pap. A Math. Phys. Charact. – volume: 160 start-page: 1095 year: 2017 ident: 10.1016/j.conbuildmat.2019.07.074_b0135 article-title: Stimulating the realistic worst case buckling scenario of axially compressed unstiffened cylindrical composite shells publication-title: Compos. Struct. doi: 10.1016/j.compstruct.2016.10.108 – volume: 127 start-page: 512 year: 2018 ident: 10.1016/j.conbuildmat.2019.07.074_b0085 article-title: Effect of 3D random pitting defects on the collapse pressure of pipe — part I: experiment publication-title: Thin-Wall Struct. doi: 10.1016/j.tws.2018.04.015 – volume: 86 start-page: 42 issue: 9 year: 2014 ident: 10.1016/j.conbuildmat.2019.07.074_b0030 article-title: Ultimate strength analysis of aged steel-plated structures exposed to marine corrosion damage: a review publication-title: Corros. Sci. doi: 10.1016/j.corsci.2014.04.043 – volume: 31 start-page: 187 year: 1998 ident: 10.1016/j.conbuildmat.2019.07.074_b0230 article-title: Effect of openings on the buckling of cylindrical shells subjected to axial compression publication-title: Thin Wall Struct. doi: 10.1016/S0263-8231(98)00003-2 – volume: 100 start-page: 12 year: 2014 ident: 10.1016/j.conbuildmat.2019.07.074_b0235 article-title: Influence of a cutout on circular steel hollow sections under cyclic loading publication-title: J. Constr. Steel Res. doi: 10.1016/j.jcsr.2014.04.015 – ident: 10.1016/j.conbuildmat.2019.07.074_b0195 – volume: 137 start-page: 387 year: 2019 ident: 10.1016/j.conbuildmat.2019.07.074_b0040 article-title: Development of erosion equation and numerical simulation methods with the consideration of applied stress publication-title: Tribol. Int. doi: 10.1016/j.triboint.2019.05.019 – volume: 129 start-page: 527 year: 2018 ident: 10.1016/j.conbuildmat.2019.07.074_b0090 article-title: Effect of 3D random pitting defects on the collapse pressure of pipe — part II: numerical analysis publication-title: Thin-Wall Struct. doi: 10.1016/j.tws.2018.04.014 – volume: 115 start-page: 154 year: 2017 ident: 10.1016/j.conbuildmat.2019.07.074_b0115 article-title: Robust design criterion for axially loaded cylindrical shells – simulation and validation publication-title: Thin-Walled Struct. doi: 10.1016/j.tws.2016.12.017 – volume: 23 start-page: 414 issue: 4 year: 1983 ident: 10.1016/j.conbuildmat.2019.07.074_b0225 article-title: Buckling of cylinders with cutouts under axial compression publication-title: Exp. Mech. doi: 10.1007/BF02330057 – volume: 131 start-page: 90 year: 2017 ident: 10.1016/j.conbuildmat.2019.07.074_b0070 article-title: Effect of simulated pitting corrosion on the tensile properties of steel publication-title: Constr. Build. Mater. doi: 10.1016/j.conbuildmat.2016.11.037 – volume: 82 start-page: 321 year: 2014 ident: 10.1016/j.conbuildmat.2019.07.074_b0200 article-title: Worst multiple perturbation load approach of stiffened shells with and without cutouts for improved knockdown factors publication-title: Thin-Walled Struct. doi: 10.1016/j.tws.2014.05.004 – year: 2012 ident: 10.1016/j.conbuildmat.2019.07.074_b0020 article-title: Manual for determining the remaining strength of corroded pipelines: a supplement to ASME B31 code for pressure piping publication-title: Am. Soc. Mech. Eng. – volume: 53 start-page: 3466 issue: 11 year: 2011 ident: 10.1016/j.conbuildmat.2019.07.074_b0265 article-title: Novel images of the evolution of stress corrosion cracks from corrosion pits publication-title: Corros. Sci. doi: 10.1016/j.corsci.2011.05.050 – volume: 105 start-page: 129 year: 2015 ident: 10.1016/j.conbuildmat.2019.07.074_b0160 article-title: Structural behavior of shells with different cutouts under compression: an experimental study publication-title: J. Constr. Steel Res. doi: 10.1016/j.jcsr.2014.10.020 – year: 2019 ident: 10.1016/j.conbuildmat.2019.07.074_b0050 article-title: Research of plastic collapse capacity of 2D ring with internal random pitting corrosion defects publication-title: J. Tianjin Univ. (Sci. Technol.) – volume: 76 start-page: 292 year: 2013 ident: 10.1016/j.conbuildmat.2019.07.074_b0185 article-title: A numerical study of damage caused by combined pitting corrosion and axial stress in steel pipes publication-title: Corros. Sci. doi: 10.1016/j.corsci.2013.07.002 – year: 1982 ident: 10.1016/j.conbuildmat.2019.07.074_b0125 – volume: 44 start-page: 254 year: 2006 ident: 10.1016/j.conbuildmat.2019.07.074_b0145 article-title: Numerical and experimental investigations of the response of aluminum cylinders with a cutout subject to axial compression publication-title: Thin-Walled Struct. doi: 10.1016/j.tws.2005.11.003 – volume: 133C start-page: 276 year: 2018 ident: 10.1016/j.conbuildmat.2019.07.074_b0005 article-title: Corrosion behavior of X65 pipeline steel: comparison of wet-dry cycle and full immersion publication-title: Corros. Sci. doi: 10.1016/j.corsci.2018.01.007 – volume: 144 start-page: 253 year: 2018 ident: 10.1016/j.conbuildmat.2019.07.074_b0015 article-title: Collapse of HSLA steel pipes under corrosion exposure and uniaxial inelastic cycling publication-title: J. Constr. Steel Res. doi: 10.1016/j.jcsr.2018.02.003 – year: 1968 ident: 10.1016/j.conbuildmat.2019.07.074_b0130 – ident: 10.1016/j.conbuildmat.2019.07.074_b0240 – start-page: 12 year: 2005 ident: 10.1016/j.conbuildmat.2019.07.074_b0245 – volume: 93 start-page: 177 year: 2015 ident: 10.1016/j.conbuildmat.2019.07.074_b0215 article-title: Influence of imperfection distributions for cylindrical stiffened shells with weld lands publication-title: Thin-Walled Struct. doi: 10.1016/j.tws.2015.03.017 – volume: 10 start-page: 193 issue: 2 year: 2010 ident: 10.1016/j.conbuildmat.2019.07.074_b0155 article-title: Buckling of steel cylindrical shells with an elliptical cutout publication-title: Int. J. Steel Struct. doi: 10.1007/BF03215830 – year: 2019 ident: 10.1016/j.conbuildmat.2019.07.074_b0045 article-title: Research of collapse pressure of 90° elbow with internal erosion-corrosion damage publication-title: J. Tianjin Univ. (Sci. Technol.) – ident: 10.1016/j.conbuildmat.2019.07.074_b0250 – volume: 70 start-page: 104 issue: 2 year: 2014 ident: 10.1016/j.conbuildmat.2019.07.074_b0065 article-title: Three-dimensional corrosion pit measurement and statistical mechanical degradation analysis of deformed steel bars subjected to accelerated corrosion publication-title: Constr. Build. Mater. doi: 10.1016/j.conbuildmat.2014.08.001 – ident: 10.1016/j.conbuildmat.2019.07.074_b0025 – volume: 98 start-page: 558 year: 2016 ident: 10.1016/j.conbuildmat.2019.07.074_b0100 article-title: Buckling behavior of axially compressed cylindrical shells: comparison of theoretical and experimental data publication-title: Thin-Walled Struct. doi: 10.1016/j.tws.2015.10.027 – volume: 53 start-page: 2878 issue: 10 year: 2015 ident: 10.1016/j.conbuildmat.2019.07.074_b0210 article-title: Hybrid framework for reliability-based design optimization of imperfect stiffened shells publication-title: AIAA J. doi: 10.2514/1.J053816 – volume: 87 start-page: 191 year: 2015 ident: 10.1016/j.conbuildmat.2019.07.074_b0010 article-title: Experimental investigation of short steel columns with localized corrosion publication-title: Thin-Walled Struct. doi: 10.1016/j.tws.2014.11.009 – volume: 119 start-page: 727 year: 2017 ident: 10.1016/j.conbuildmat.2019.07.074_b0080 article-title: Computation of plastic collapse capacity of 2D ring with random pitting corrosion defect publication-title: Thin-Wall Struct. doi: 10.1016/j.tws.2017.07.025 – year: 2018 ident: 10.1016/j.conbuildmat.2019.07.074_b0190 publication-title: Corros. Sci. – volume: 58 start-page: 1 year: 2018 ident: 10.1016/j.conbuildmat.2019.07.074_b0220 article-title: Experimental and numerical analyses of the ultimate compressive strength of perforated offshore tubular members publication-title: Mar. Struct. doi: 10.1016/j.marstruc.2017.10.010 – volume: 49 start-page: 559 issue: 2 year: 2007 ident: 10.1016/j.conbuildmat.2019.07.074_b0270 article-title: Stochastic modeling of pitting corrosion: a new model for initiation and growth of multiple corrosion pits publication-title: Corros. Sci. doi: 10.1016/j.corsci.2006.05.049 – volume: 38 start-page: 139 year: 2013 ident: 10.1016/j.conbuildmat.2019.07.074_b0055 article-title: Chloride-induced corrosion of steel reinforcement – mechanical performance and pit depth analysis publication-title: Constr. Build. Mater. doi: 10.1016/j.conbuildmat.2012.07.087 – year: 2004 ident: 10.1016/j.conbuildmat.2019.07.074_b0110 – volume: 96 start-page: 129 year: 2016 ident: 10.1016/j.conbuildmat.2019.07.074_b0180 article-title: Effect of multiple holes on dynamic buckling of stubby shells: an experimental and numerical investigation publication-title: Int. J. Impact Eng. doi: 10.1016/j.ijimpeng.2016.05.014 – volume: 137 start-page: 169 year: 2017 ident: 10.1016/j.conbuildmat.2019.07.074_b0170 article-title: Recovery of capacity lost due to openings in cylindrical shells under compression publication-title: J. Constr. Steel Res. doi: 10.1016/j.jcsr.2017.06.006 – volume: 96 start-page: 11 year: 2015 ident: 10.1016/j.conbuildmat.2019.07.074_b0175 article-title: Numerical methods for the design of cylindrical steel shells with unreinforced or reinforced cutouts publication-title: Thin-Walled Struct. doi: 10.1016/j.tws.2015.07.024 – volume: 119 start-page: 457 year: 2017 ident: 10.1016/j.conbuildmat.2019.07.074_b0140 article-title: An analytical and numerical study on the buckling of cracked cylindrical shells publication-title: Thin-Walled Struct. doi: 10.1016/j.tws.2017.06.023 – volume: 47 start-page: 2450 issue: 10 year: 2005 ident: 10.1016/j.conbuildmat.2019.07.074_b0260 article-title: Environmental embrittlement of automobile spring steels caused by wet-dry cyclic corrosion in sodium chloride solution publication-title: Corros. Sci. doi: 10.1016/j.corsci.2004.10.008 – volume: 173 start-page: 281 year: 2017 ident: 10.1016/j.conbuildmat.2019.07.074_b0205 article-title: Robust knockdown factors for the design of axially loaded cylindrical and conical composite shells – development and validation publication-title: Compos. Struct. doi: 10.1016/j.compstruct.2017.02.031 – volume: 152 start-page: 777 year: 2017 ident: 10.1016/j.conbuildmat.2019.07.074_b0075 article-title: Predicting the residual strength and deformability of corroded steel plate based on the corrosion morphology publication-title: Constr. Build. Mater. doi: 10.1016/j.conbuildmat.2017.07.035 – volume: 84 start-page: 12 year: 2010 ident: 10.1016/j.conbuildmat.2019.07.074_b0105 article-title: Numerical and experimental investigation on ultimate strength of cracked cylindrical shells subjected to combined loading publication-title: Mechanika – volume: 119 start-page: 868 year: 2017 ident: 10.1016/j.conbuildmat.2019.07.074_b0165 article-title: Empirical equations to estimate non-linear collapse of medium-length cylindrical shells with circular cutouts publication-title: Thin-Walled Struct. doi: 10.1016/j.tws.2017.08.008 – volume: 116 start-page: 19 year: 2017 ident: 10.1016/j.conbuildmat.2019.07.074_b0035 article-title: On the effect of axial length parameters of ovality on the collapse pressure of pipelines publication-title: Thin-Wall Struct. doi: 10.1016/j.tws.2017.02.032 |
| SSID | ssj0006262 |
| Score | 2.4493856 |
| Snippet | •The effect of pits on the collapse pressure of cylinder under axial compression was experimental and numerical studied.•A novel shell model with pitting... |
| SourceID | crossref elsevier |
| SourceType | Enrichment Source Index Database Publisher |
| StartPage | 226 |
| SubjectTerms | Axial compression Buckling Cylinder Pitting corrosion |
| Title | Effect of pitting defects on the buckling strength of thick-wall cylinder under axial compression |
| URI | https://dx.doi.org/10.1016/j.conbuildmat.2019.07.074 |
| Volume | 224 |
| WOSCitedRecordID | wos000487572800021&url=https%3A%2F%2Fcvtisr.summon.serialssolutions.com%2F%23%21%2Fsearch%3Fho%3Df%26include.ft.matches%3Dt%26l%3Dnull%26q%3D |
| hasFullText | 1 |
| inHoldings | 1 |
| isFullTextHit | |
| isPrint | |
| journalDatabaseRights | – providerCode: PRVESC databaseName: Elsevier SD Freedom Collection Journals 2021 customDbUrl: eissn: 1879-0526 dateEnd: 99991231 omitProxy: false ssIdentifier: ssj0006262 issn: 0950-0618 databaseCode: AIEXJ dateStart: 19950201 isFulltext: true titleUrlDefault: https://www.sciencedirect.com providerName: Elsevier |
| link | http://cvtisr.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwtV1Lb9NAEF6FFiE4VDxFoaBF4lZZctZrr1fqpUJFpYeKQxHhZK33AW7TTRSSEv5Jfy6zDz_KQy1ISJGVjOJ1NvN5ZnY8-w1Cr3MCa-NSSLejR7tslUnKgmUJuH5VFpRltBa-2QQ7Pi4nE_5-NLps98JcTJm15XrN5_9V1SADZbuts3-h7m5QEMB7UDocQe1wvJHiIx-xq2RuQlGz0rFmI5Q01u5xbkgjLLT9vPwS6gQaeZZ8cw-q5fep41Bc-Ba5i12xbjyHyHksmbXDeNb1-2wZaD2K6thmexci4TDbPmUfzMrhSpytOkh-WnknIKID7SRHANt100snXvpRN3MdhTFVMeaJL5e7knN0XW6iwY3mlxA6NKCkGPhiEkixfjHzIeNwClqyflowJVelxz0Pa-j6c5Va-yeX1xUitjVup9VgqMoNVaUMXvQW2iQs52AvN_ffHUyOOi8PC0ESeBzDlO6gV33t4B9-1-9jn0E8c3IfbcWFCN4PAHqARto-RPcG9JSPkAhQwjODI5RwhBKeWQxQwi2UcAsl990eSriFEvZQwh5KeAClx-jD24OTN4dJbMmRyIyMl0muuDRa1XlumJEkLw18rF2IA3bf5LzgSgqhda2o4Ewax1ZHU0MzJVIiFcueoA07s_opwqnJiiJVY6JVRh1JEQdnkNZpbSBmrinbRmX7Z1Uy8tW7tinT6lqlbSPSnToPpC03OWmv1UgVo88QVVaAuutPf_Yv13yO7vb3yQ7agBtWv0C35cWy-bp4GSH3AzdUsao |
| linkProvider | Elsevier |
| openUrl | ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Effect+of+pitting+defects+on+the+buckling+strength+of+thick-wall+cylinder+under+axial+compression&rft.jtitle=Construction+%26+building+materials&rft.au=Wang%2C+Huakun&rft.au=Yu%2C+Yang&rft.au=Yu%2C+Jianxing&rft.au=Xu%2C+Weipeng&rft.date=2019-11-10&rft.issn=0950-0618&rft.volume=224&rft.spage=226&rft.epage=241&rft_id=info:doi/10.1016%2Fj.conbuildmat.2019.07.074&rft.externalDBID=n%2Fa&rft.externalDocID=10_1016_j_conbuildmat_2019_07_074 |
| thumbnail_l | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=0950-0618&client=summon |
| thumbnail_m | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=0950-0618&client=summon |
| thumbnail_s | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=0950-0618&client=summon |