Optimum displacement profile for the direct displacement-based design of steel moment-resisting frames

The direct displacement-based design (DDBD) procedure is well established for designing reinforced concrete and steel moment-resisting frames (SMRFs). However, a limited number of researches is available on optimum DDBD of SMRFs. Furthermore, the nonlinear time-history analysis response of structure...

Celý popis

Uloženo v:

Podrobná bibliografie
Vydáno v:	Structures (Oxford) Ročník 44; s. 323 - 342
Hlavní autoři:	Arab, Mohammadamin, Tajmir Riahi, Hossein, Daei, Maryam
Médium:	Journal Article
Jazyk:	angličtina
Vydáno:	Elsevier Ltd 01.10.2022
Témata:	Design Displacement Profile Direct Displacement Based Design Nonlinear Time History Analysis Particle Swarm Optimization Algorithm Steel Moment-resisting Frame Nonlinear Time History Analysis Particle Swarm Optimization Algorithm Direct Displacement Based Design Steel Moment-resisting Frame Design Displacement Profile
ISSN:	2352-0124, 2352-0124
On-line přístup:	Získat plný text
Tagy:	Přidat tag Žádné tagy, Buďte první, kdo vytvoří štítek k tomuto záznamu!

Popis
Shrnutí:	The direct displacement-based design (DDBD) procedure is well established for designing reinforced concrete and steel moment-resisting frames (SMRFs). However, a limited number of researches is available on optimum DDBD of SMRFs. Furthermore, the nonlinear time-history analysis response of structures designed based on this procedure is inconsistent with its initial assumptions. Design displacement profile is one of the most essential and influential parameters in the DDBD method because it can impress other design parameters. In this paper, an optimum displacement profile is proposed to improve the results of the DDBD procedure via using the particle swarm optimization (PSO) algorithm. In this regard, nine SMRFs with a different number of stories have been designed using the DDBD procedure. Nonlinear time history analyses are performed for these frames using OpenSees software. The models are subjected to a set of 20 ground motion records. Then, PSO algorithm has been used to optimize the displacement profile of the DDBD procedure to achieve uniform drift distribution along with the height of the frames. Finally, based on regression analysis, the optimum design displacement profile for SMRFs with a different number of stories is formulated. The proposed equations show an average reduction of about 20% and 40% in steel usage and design base shear of the frames, respectively, while they have uniform drift along their heights.
ISSN:	2352-0124 2352-0124
DOI:	10.1016/j.istruc.2022.07.082