Effect of Zr addition on the structure, nanomechanical properties, and helium irradiation behavior of the novel MoTaTiV body-centered cubic concentrated solid solution alloy

The rapidly developing technology of fusion reactors requires the development of new materials with enhanced radiation resistance. In this study, two new equimolar concentrated solid solution alloys (CSAs), MoTaTiV and MoTaTiVZr, designed for nuclear applications, were synthesized using magnetron sp...

Celý popis

Uloženo v:
Podrobná bibliografie
Vydáno v:Journal of nuclear materials Ročník 615; s. 155994
Hlavní autoři: Kalita, Damian, Mulewska, Katarzyna, Jóźwik, Iwona, Zhang, Yanwen, Kurpaska, Łukasz, Rack, Philip D., Weber, William J., Jagielski, Jacek
Médium: Journal Article
Jazyk:angličtina
Vydáno: Elsevier B.V 01.09.2025
Témata:
Concentrated solid solution alloys
He bubbles
High entropy alloys
Ion irradiation
Nuclear materials
Radiation damage
High entropy alloys
Ion irradiation
Nuclear materials
Concentrated solid solution alloys
Radiation damage
He bubbles
ISSN:0022-3115
On-line přístup:Získat plný text
Tagy: Přidat tag
Žádné tagy, Buďte první, kdo vytvoří štítek k tomuto záznamu!
Popis
Shrnutí:The rapidly developing technology of fusion reactors requires the development of new materials with enhanced radiation resistance. In this study, two new equimolar concentrated solid solution alloys (CSAs), MoTaTiV and MoTaTiVZr, designed for nuclear applications, were synthesized using magnetron sputtering. The MoTaTiV alloy exhibited a columnar microstructure, characteristic for materials produced via magnetron sputtering, and a body-centered cubic (BCC) structure. The addition of Zr to form the quinary MoTaTiVZr alloy led to the formation of an amorphous phase due to increased lattice distortion caused by the introduction of Zr into the crystal structure of the base alloy. To evaluate the irradiation resistance of the synthesized alloys, the materials were irradiated with 200 keV He⁺ ions. In the case of MoTaTiV, helium bubble formation was initially observed primarily at column boundaries, which serve as preferential nucleation sites. However, at a fluence of 5 × 10¹⁶ cm⁻², bubbles were also detected within the matrix. For the MoTaTiVZr alloy, due to its amorphous structure, bubbles were uniformly distributed throughout the matrix. Despite these differences in He accumulation behavior, the bubbles in the MoTaTiVZr CSA were slightly smaller, indicating that increasing lattice distortion inhibits bubble growth. Furthermore, the absence of radiation-induced hardening in both materials suggests a high intrinsic resistance to radiation damage.
ISSN:0022-3115
DOI:10.1016/j.jnucmat.2025.155994