Experimental investigation of nano materials applicability in Hot Mix Asphalt (HMA)
•The efficacy of using Nano materials in Hot Mix Asphalt (HMA) was examined.•The effect of CNT and NC, loading frequency and temperature on dynamic modulus and resilient modulus were investigated.•Nano materials (CNT and NC) led to higher stiffness improved Dynamic stability rutting resistance and m...
Uložené v:
| Vydané v: | Construction & building materials Ročník 350; s. 128882 |
|---|---|
| Hlavní autori: | , , |
| Médium: | Journal Article |
| Jazyk: | English |
| Vydavateľské údaje: |
Elsevier Ltd
03.10.2022
|
| Predmet: | |
| ISSN: | 0950-0618, 1879-0526 |
| On-line prístup: | Získať plný text |
| Tagy: |
Pridať tag
Žiadne tagy, Buďte prvý, kto otaguje tento záznam!
|
| Abstract | •The efficacy of using Nano materials in Hot Mix Asphalt (HMA) was examined.•The effect of CNT and NC, loading frequency and temperature on dynamic modulus and resilient modulus were investigated.•Nano materials (CNT and NC) led to higher stiffness improved Dynamic stability rutting resistance and moisture resistance of HMA.•The optimized percentage of CNT and 1.5% CNT with NC in HMA was determined to be 1.5% and 6%, respectively.•MEP and regression techniques was developed in predicting the dynamic modulus of the nano material modified HMA.
Nanotechnology for asphalt modification and incorporating nanomaterials into Hot Mix Asphalt (HMA) to deal with road failure have gained popularity recently. Researchers have reported the improved performance of asphalt modified by nanomaterials but most of the study is limited to binder modification using nanomaterials. The utilization of Nanomaterials in HMA can significantly improve the performance indicators in the form of extension in pavement service life and decrease pavement distresses. The Nanomaterials reinforcement of HMA can enhance pavement performance indicators, including low and high-temperature dynamic modulus and stability and enhancement in rut resistance and stiffness modulus. Nano Materials modified is a suitable solution to improve the mechanical properties of HMA. The current study objectives focus on the experimental investigation of Nano Materials such as Carbon Nano Tubes (CNT) and Nano Clay (NC) applicability in HMA. CNT and NC percentages used in HMA to the weight of bitumen are 0.5%, 1.5%, 2.5% and 2%, 4%, 6%, 8%. Conventional and Nanomaterial modified asphalt mixes were subjected to performance tests such as Simple Performance Tester (SPT), Dynamic Stability and Rutting, Tensile Strength Ratio (TSR), and Resilient Modulus (MR) using UTM-25. The present study further aimed to predicting dynamic modulus of nanomaterial modified HMA through Artificial intelligence (AI) modeling using Multi Expression Programming (MEPX) and Regression modelling with validation. Results have indicated that the addition of CNT and NC has improved HMA properties such as enhancement in dynamic modulus and dynamic stability and improves stiffness, rut resistance, and moisture resistance. It has been observed that 1.5% CNT with 6% NC content by weight of bitumen in asphalt mixtures outperformed other CNT and NC percentages. Moreover, Dynamic stability and Rut resistance have been improved by 820% and 64.7%, respectively, while resilient modulus increased by 309% and moisture susceptibility has been reduced by 22.26%. Overall, the asphalt mixtures with 1.5% CNT with 6% NC content has the best results. |
|---|---|
| AbstractList | •The efficacy of using Nano materials in Hot Mix Asphalt (HMA) was examined.•The effect of CNT and NC, loading frequency and temperature on dynamic modulus and resilient modulus were investigated.•Nano materials (CNT and NC) led to higher stiffness improved Dynamic stability rutting resistance and moisture resistance of HMA.•The optimized percentage of CNT and 1.5% CNT with NC in HMA was determined to be 1.5% and 6%, respectively.•MEP and regression techniques was developed in predicting the dynamic modulus of the nano material modified HMA.
Nanotechnology for asphalt modification and incorporating nanomaterials into Hot Mix Asphalt (HMA) to deal with road failure have gained popularity recently. Researchers have reported the improved performance of asphalt modified by nanomaterials but most of the study is limited to binder modification using nanomaterials. The utilization of Nanomaterials in HMA can significantly improve the performance indicators in the form of extension in pavement service life and decrease pavement distresses. The Nanomaterials reinforcement of HMA can enhance pavement performance indicators, including low and high-temperature dynamic modulus and stability and enhancement in rut resistance and stiffness modulus. Nano Materials modified is a suitable solution to improve the mechanical properties of HMA. The current study objectives focus on the experimental investigation of Nano Materials such as Carbon Nano Tubes (CNT) and Nano Clay (NC) applicability in HMA. CNT and NC percentages used in HMA to the weight of bitumen are 0.5%, 1.5%, 2.5% and 2%, 4%, 6%, 8%. Conventional and Nanomaterial modified asphalt mixes were subjected to performance tests such as Simple Performance Tester (SPT), Dynamic Stability and Rutting, Tensile Strength Ratio (TSR), and Resilient Modulus (MR) using UTM-25. The present study further aimed to predicting dynamic modulus of nanomaterial modified HMA through Artificial intelligence (AI) modeling using Multi Expression Programming (MEPX) and Regression modelling with validation. Results have indicated that the addition of CNT and NC has improved HMA properties such as enhancement in dynamic modulus and dynamic stability and improves stiffness, rut resistance, and moisture resistance. It has been observed that 1.5% CNT with 6% NC content by weight of bitumen in asphalt mixtures outperformed other CNT and NC percentages. Moreover, Dynamic stability and Rut resistance have been improved by 820% and 64.7%, respectively, while resilient modulus increased by 309% and moisture susceptibility has been reduced by 22.26%. Overall, the asphalt mixtures with 1.5% CNT with 6% NC content has the best results. |
| ArticleNumber | 128882 |
| Author | Zahid, Awais Ahmed, Sarfraz Irfan, Muhammad |
| Author_xml | – sequence: 1 givenname: Awais surname: Zahid fullname: Zahid, Awais email: Awazahid.pg19mce@student.nust.edu.pk, Awaiszahid8655@gmail.com – sequence: 2 givenname: Sarfraz surname: Ahmed fullname: Ahmed, Sarfraz email: sarfraz@mce.nust.edu.pk – sequence: 3 givenname: Muhammad surname: Irfan fullname: Irfan, Muhammad email: mirfan@mce.nust.edu.pk |
| BookMark | eNqNkEFPwjAYhhuDiYj-h3rTw-bXwrruZAhBMYF4UM9N13ZaMtplrQT-vUU8GE-cvsvzPcn7XKKB884gdEMgJ0DY_TpX3tVfttUbGXMKlOaEcs7pGRoSXlYZFJQN0BCqAjJghF-gyxDWAMAoo0P0Ot91prcb46JssXVbE6L9kNF6h32DnXQeJ3NCZBuw7LrWKlnb1sZ9ovHCR7yyOzwN3adsI75drKZ3V-i8SbS5_r0j9P44f5stsuXL0_NsuswU5ZOYVWUxbggYMpGsKhRoOdGaMKUIlGoMoHkha860JERpIAktKWfAQde6BjDjEaqOXtX7EHrTiC4tkf1eEBCHOmIt_tQRhzriWCf9Pvz7VTb-zI69tO1JhtnRYNLErTW9CMoap4y2vVFRaG9PsHwD8JCL2Q |
| CitedBy_id | crossref_primary_10_3390_su17125472 crossref_primary_10_1007_s42947_024_00416_0 crossref_primary_10_1080_14680629_2024_2446427 crossref_primary_10_3390_infrastructures9120216 crossref_primary_10_1016_j_conbuildmat_2025_140474 crossref_primary_10_1016_j_rineng_2025_106219 crossref_primary_10_1016_j_clwas_2025_100214 crossref_primary_10_1016_j_jtte_2024_10_002 crossref_primary_10_3390_lubricants12100332 crossref_primary_10_1016_j_conbuildmat_2024_135157 crossref_primary_10_1016_j_conbuildmat_2023_134136 crossref_primary_10_3390_buildings13092352 crossref_primary_10_1016_j_conbuildmat_2024_139246 crossref_primary_10_1016_j_conbuildmat_2025_142896 |
| Cites_doi | 10.1016/j.conbuildmat.2017.08.187 10.1080/00401706.1959.10489866 10.1080/10298430008901701 10.1016/j.jclepro.2020.120732 10.1080/10298436.2014.923099 10.1016/j.conbuildmat.2009.02.027 10.1007/s42947-020-0006-3 10.1080/10298436.2011.560267 10.1016/j.conbuildmat.2015.10.153 10.1016/j.trpro.2014.07.009 10.1016/j.conbuildmat.2010.03.014 10.1007/s11771-017-3504-y 10.1080/14680629.2017.1323661 10.1080/14680629.2018.1527718 10.1016/j.jmst.2013.04.008 10.1016/j.ijfatigue.2015.05.008 10.1016/j.conbuildmat.2009.08.032 10.1016/j.conbuildmat.2018.10.155 10.3390/su12093531 10.1016/j.conbuildmat.2015.03.035 10.1016/j.conbuildmat.2016.05.168 10.1557/mrs2004.81 10.1016/j.conbuildmat.2016.09.038 10.1016/j.conbuildmat.2010.06.070 10.1016/j.conbuildmat.2019.07.252 10.1016/j.conbuildmat.2019.01.114 10.3390/ma3020918 10.1038/381678a0 10.1016/j.sbspro.2012.09.905 10.3390/ma10040416 10.1016/j.conbuildmat.2019.08.005 10.1080/10298436.2018.1519190 10.28991/cej-2020-03091525 10.1016/j.ejpe.2012.11.008 10.17485/ijst/2013/v6i11.13 10.1111/1467-9884.00179 10.1016/j.jclepro.2019.04.409 10.1139/L07-126 10.1002/9781444317992 10.1016/j.conbuildmat.2017.03.158 10.1016/j.conbuildmat.2020.118391 |
| ContentType | Journal Article |
| Copyright | 2022 Elsevier Ltd |
| Copyright_xml | – notice: 2022 Elsevier Ltd |
| DBID | AAYXX CITATION |
| DOI | 10.1016/j.conbuildmat.2022.128882 |
| DatabaseName | CrossRef |
| DatabaseTitle | CrossRef |
| DatabaseTitleList | |
| DeliveryMethod | fulltext_linktorsrc |
| Discipline | Engineering |
| EISSN | 1879-0526 |
| ExternalDocumentID | 10_1016_j_conbuildmat_2022_128882 S0950061822025387 |
| GroupedDBID | --K --M .~1 0R~ 1B1 1~. 1~5 29F 4.4 457 4G. 5GY 5VS 6J9 7-5 71M 8P~ 9JN AABNK AABXZ AACTN AAEDT AAEDW AAEPC AAIAV AAIKJ AAKOC AALRI AAOAW AAQFI AAXUO ABFRF ABJNI ABMAC ABXRA ABYKQ ACDAQ ACGFO ACGFS ACRLP ADBBV ADEZE ADHUB ADTZH AEBSH AECPX AEFWE AEKER AENEX AEZYN AFKWA AFRZQ AFTJW AGHFR AGUBO AGYEJ AHHHB AHJVU AIEXJ AIKHN AITUG AJOXV ALMA_UNASSIGNED_HOLDINGS AMFUW AMRAJ AXJTR BAAKF BJAXD BKOJK BLXMC CS3 DU5 EBS EFJIC EFLBG EO8 EO9 EP2 EP3 FDB FIRID FNPLU FYGXN G-Q GBLVA IAO IEA IGG IHE IHM IOF ISM J1W JJJVA KOM LY7 M24 M41 MAGPM MO0 N95 N9A O-L O9- OAUVE OZT P-8 P-9 P2P PC. PV9 Q38 ROL RPZ RZL SDF SDG SES SPC SPCBC SSM SST SSZ T5K UNMZH XI7 ~G- 9DU AAQXK AATTM AAXKI AAYWO AAYXX ABFNM ABWVN ABXDB ACLOT ACNNM ACRPL ACVFH ADCNI ADMUD ADNMO AEIPS AEUPX AFJKZ AFPUW AHDLI AI. AIGII AIIUN AKBMS AKRWK AKYEP ANKPU APXCP ASPBG AVWKF AZFZN BAIFH BBTPI CITATION EFKBS EJD FEDTE FGOYB G-2 HVGLF HZ~ ITC R2- RNS SET SEW SMS VH1 WUQ ZMT ~HD |
| ID | FETCH-LOGICAL-c284t-9753f10e14a695c0da4dd16cc107c300d85ab86da11cd01f107286080dbdb00e3 |
| ISICitedReferencesCount | 18 |
| ISICitedReferencesURI | http://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=Summon&SrcAuth=ProQuest&DestLinkType=CitingArticles&DestApp=WOS_CPL&KeyUT=000861324700001&url=https%3A%2F%2Fcvtisr.summon.serialssolutions.com%2F%23%21%2Fsearch%3Fho%3Df%26include.ft.matches%3Dt%26l%3Dnull%26q%3D |
| ISSN | 0950-0618 |
| IngestDate | Sat Nov 29 07:08:04 EST 2025 Tue Nov 18 22:33:27 EST 2025 Fri Feb 23 02:38:17 EST 2024 |
| IsPeerReviewed | true |
| IsScholarly | true |
| Keywords | Dynamic modulus Rutting Nanomaterials Artificial Intelligence (AI) Hot Mix Asphalt (HMA) |
| Language | English |
| LinkModel | OpenURL |
| MergedId | FETCHMERGED-LOGICAL-c284t-9753f10e14a695c0da4dd16cc107c300d85ab86da11cd01f107286080dbdb00e3 |
| ParticipantIDs | crossref_primary_10_1016_j_conbuildmat_2022_128882 crossref_citationtrail_10_1016_j_conbuildmat_2022_128882 elsevier_sciencedirect_doi_10_1016_j_conbuildmat_2022_128882 |
| PublicationCentury | 2000 |
| PublicationDate | 2022-10-03 |
| PublicationDateYYYYMMDD | 2022-10-03 |
| PublicationDate_xml | – month: 10 year: 2022 text: 2022-10-03 day: 03 |
| PublicationDecade | 2020 |
| PublicationTitle | Construction & building materials |
| PublicationYear | 2022 |
| Publisher | Elsevier Ltd |
| Publisher_xml | – name: Elsevier Ltd |
| References | Chen, Zhang, Zhu, Zhao (b0015) 2015; 101 AASHTO T312, “Standard Method for Preparing and Determining the Density of Hot Mix Asphalt (HMA) Specimens By Means of the SHRP Gyratory Compactor (AASHTO T 312),” Am. Assoc. State Highw. Transp. Off. Washingt. DC, pp. 1–6, 2015. Treacy, Ebbesen, Gibson (b0125) 1996; 381 Mitchell, Link, Amirkhanian, Xiao, Amirkhanian (b0190) 2011; 39 L. M. J. Mahdi, “Effect of Short Term Aging on Organic Montmorillonite Nanoclay Modified Asphalt,” Indian J. Sci. Technol., 6(11), pp. 1–9, 2013, doi:10.17485/ijst/2013/v6i11.13. Amin, Esmail (b0135) 2017; 24 Sanchez, Sobolev (b0075) 2010; 24 Jahromi, Khodaii (b0165) 2009; 23 C. F. J. W. Rahul Mukerjee, A Modern Theory of Factorial Designs. New York, NY: Springer New York, 2006. JTG E20 T0719, “Rutting Test of Asphalt Mixtures; Ministry of Transport of the People’s Republic of China: Beijing, China, 2011.,” 2011. Raki, Beaudoin, Alizadeh, Makar, Sato (b0070) 2010; 3 F. Allhoff, P. Lin, and D. Moore, What is nanotechnology and why does it matter?: From science to ethics. 2009. Omar, Yusoff, Sajuri, Ceylan, Jakarni, Ismail (b0160) 2016; 126 Yu, Zhu, Zhang, Yu, Oeser, Wang (b0005) 2019; 229 Mee (b0245) 2009 M. Iqbal, A. Hussain, A. Khattak, and K. Ahmad, “Improving the Aging Resistance of Asphalt by Addition of Polyethylene and Sulphur,” Civ. Eng. J., 6(5), pp. 1017–1030, 2020, doi:10.28991/cej-2020-03091525. Sibal, Das, Pandey (b0060) 2000; 1 Z. Hasan, R. Kamran, F. Mohammad, G. Ahmad, and F. Hosein, “Evaluation of Different Conditions on The Mixing Bitumen and Carbon NanoTubes,” 2012. Li, Xiao, Amirkhanian, You, Huang (b0085) 2017; 143 Xiao, Amirkhanian, Amirkhanian (b0185) 2011; 12 Santagata, Baglieri, Tsantilis, Chiappinelli (b0205) 2015; 80 M. Alamri, Q. Lu, and C. Xin, “Preliminary evaluation of hot mix asphalt containing reclaimed epoxy asphalt materials,” Sustain., 12(9), 2020, doi:10.3390/SU12093531. Memon, Khaskheli, Qureshi (b0065) 2008; 35 ASTM D 6931-12, “Standard Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures,” ASTM Int., no. Fixed desination D6981, pp. 1–5, 2007, 10.1520/D6931-12.2. Ashish, Singh (b0105) 2020; 21 Fang, Yu, Liu, Li (b0115) 2013; 29 Arabani, Faramarzi (b0195) 2015; 83 Broota (b0260) 1989 S. H. Mousavinezhad, G. H. Shafabakhsh, and O. Jafari Ani, “Nano-clay and styrene-butadiene-styrene modified bitumen for improvement of rutting performance in asphalt mixtures containing steel slag aggregates,” Constr. Build. Mater Mamun, Arifuzzaman (b0100) 2018; 193 B. Shu, S. Wu, L. Pang, and B. Javilla, “The utilization of multiple-walled carbon nanotubes in polymer modified bitumen,” Materials (Basel)., 10(4), 2017, doi:10.3390/ma10040416. Zhang, Luo, Deng, Hou, Shi, Lytton (b0045) 2020; 247 Santagata, Baglieri, Tsantilis, Chiappinelli (b0200) 2015; 16 Kiel, Smith, Ubbels (b0040) 2014; 1 Galooyak, Dabir, Nazarbeygi, Moeini (b0050) 2010; 24 de Heer (b0130) 2004; 29 Gong, Yang, Yao, Wang, Niu, Haddock (b0150) 2018; 19 Santagata, Baglieri, Tsantilis, Dalmazzo (b0120) 2012; 53 El-Shafie, Ibrahim, Abd El Rahman (b0140) 2012; 21 Amin, El-Badawy, Breakah, Ibrahim (b0155) 2016; 121 Fakhri, Kianfar (b0110) 2021; 14 226, pp. 793–801, 2019, doi:10.1016/j.conbuildmat.2019.07.252. EN 12697-26, “Bituminous mixtures - Test methods for hot mix asphalt -Part 26: Stiffness,” Eur. Stand., no. June, p. 104, 2012. Daniel (b0255) 1959; 1 D. C. Montgomery, “Experimental Design for Product and Process Design and Development,” J. R. Stat. Soc. Ser. D (The Stat., 48(2), pp. 159–177, 1999, doi:10.1111/1467-9884.00179. Yan, Chen, You, Tian (b0030) 2020; 258 Jia, Sha, Zhang, Li, Yuan, Jiang (b0025) 2019; 227 AASHTO-TP 62-07, “Determining Dynamic Modulus of Hot Mix Asphalt (HMA),” Am. Assoc. State Highw. Transp. Off., pp. 1–18, 2009. ASTM D 6925, “Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Giratory Compactor,” ASTM - Am. Soc. Test. Mater., vol. i, pp. 1–4, 2003. Ding (b0055) 2019; 203 Al-Omari, Taamneh, Khasawneh, Al-Hosainat (b0095) 2020; 21 Han, Zheng, Li, Li, Zhu, Ma (b0090) 2017; 157 You (b0170) 2011; 25 de Heer (10.1016/j.conbuildmat.2022.128882_b0130) 2004; 29 10.1016/j.conbuildmat.2022.128882_b0215 10.1016/j.conbuildmat.2022.128882_b0210 Santagata (10.1016/j.conbuildmat.2022.128882_b0120) 2012; 53 10.1016/j.conbuildmat.2022.128882_b0010 10.1016/j.conbuildmat.2022.128882_b0175 Raki (10.1016/j.conbuildmat.2022.128882_b0070) 2010; 3 10.1016/j.conbuildmat.2022.128882_b0250 Al-Omari (10.1016/j.conbuildmat.2022.128882_b0095) 2020; 21 Mamun (10.1016/j.conbuildmat.2022.128882_b0100) 2018; 193 Yan (10.1016/j.conbuildmat.2022.128882_b0030) 2020; 258 El-Shafie (10.1016/j.conbuildmat.2022.128882_b0140) 2012; 21 Ashish (10.1016/j.conbuildmat.2022.128882_b0105) 2020; 21 Fakhri (10.1016/j.conbuildmat.2022.128882_b0110) 2021; 14 Amin (10.1016/j.conbuildmat.2022.128882_b0155) 2016; 121 Amin (10.1016/j.conbuildmat.2022.128882_b0135) 2017; 24 Li (10.1016/j.conbuildmat.2022.128882_b0085) 2017; 143 Treacy (10.1016/j.conbuildmat.2022.128882_b0125) 1996; 381 Jia (10.1016/j.conbuildmat.2022.128882_b0025) 2019; 227 10.1016/j.conbuildmat.2022.128882_b0240 Galooyak (10.1016/j.conbuildmat.2022.128882_b0050) 2010; 24 10.1016/j.conbuildmat.2022.128882_b0080 Mee (10.1016/j.conbuildmat.2022.128882_b0245) 2009 Omar (10.1016/j.conbuildmat.2022.128882_b0160) 2016; 126 Ding (10.1016/j.conbuildmat.2022.128882_b0055) 2019; 203 Mitchell (10.1016/j.conbuildmat.2022.128882_b0190) 2011; 39 Arabani (10.1016/j.conbuildmat.2022.128882_b0195) 2015; 83 You (10.1016/j.conbuildmat.2022.128882_b0170) 2011; 25 10.1016/j.conbuildmat.2022.128882_b0235 Broota (10.1016/j.conbuildmat.2022.128882_b0260) 1989 10.1016/j.conbuildmat.2022.128882_b0035 10.1016/j.conbuildmat.2022.128882_b0230 Sanchez (10.1016/j.conbuildmat.2022.128882_b0075) 2010; 24 Daniel (10.1016/j.conbuildmat.2022.128882_b0255) 1959; 1 Xiao (10.1016/j.conbuildmat.2022.128882_b0185) 2011; 12 Zhang (10.1016/j.conbuildmat.2022.128882_b0045) 2020; 247 Gong (10.1016/j.conbuildmat.2022.128882_b0150) 2018; 19 Jahromi (10.1016/j.conbuildmat.2022.128882_b0165) 2009; 23 Fang (10.1016/j.conbuildmat.2022.128882_b0115) 2013; 29 Chen (10.1016/j.conbuildmat.2022.128882_b0015) 2015; 101 Sibal (10.1016/j.conbuildmat.2022.128882_b0060) 2000; 1 10.1016/j.conbuildmat.2022.128882_b0225 10.1016/j.conbuildmat.2022.128882_b0145 Santagata (10.1016/j.conbuildmat.2022.128882_b0205) 2015; 80 10.1016/j.conbuildmat.2022.128882_b0220 10.1016/j.conbuildmat.2022.128882_b0020 Han (10.1016/j.conbuildmat.2022.128882_b0090) 2017; 157 Kiel (10.1016/j.conbuildmat.2022.128882_b0040) 2014; 1 10.1016/j.conbuildmat.2022.128882_b0180 Memon (10.1016/j.conbuildmat.2022.128882_b0065) 2008; 35 Yu (10.1016/j.conbuildmat.2022.128882_b0005) 2019; 229 Santagata (10.1016/j.conbuildmat.2022.128882_b0200) 2015; 16 |
| References_xml | – volume: 229 start-page: 22 year: 2019 end-page: 31 ident: b0005 article-title: Recycling waste packaging tape into bituminous mixtures towards enhanced mechanical properties and environmental benefits publication-title: J. Clean. Prod. – reference: M. Alamri, Q. Lu, and C. Xin, “Preliminary evaluation of hot mix asphalt containing reclaimed epoxy asphalt materials,” Sustain., 12(9), 2020, doi:10.3390/SU12093531. – volume: 29 start-page: 281 year: 2004 end-page: 285 ident: b0130 article-title: Nanotubes and the Pursuit of Applications publication-title: MRS Bull. – reference: Z. Hasan, R. Kamran, F. Mohammad, G. Ahmad, and F. Hosein, “Evaluation of Different Conditions on The Mixing Bitumen and Carbon NanoTubes,” 2012. – volume: 80 start-page: 30 year: 2015 end-page: 39 ident: b0205 article-title: Fatigue and healing properties of nano-reinforced bituminous binders publication-title: Int. J. Fatigue – volume: 157 start-page: 277 year: 2017 end-page: 291 ident: b0090 article-title: Effect of nano silica and pretreated rubber on the properties of terminal blend crumb rubber modified asphalt publication-title: Constr. Build. Mater. – volume: 21 start-page: 757 year: 2020 end-page: 779 ident: b0095 article-title: Effect of crumb tire rubber, microcrystalline synthetic wax, and nano silica on asphalt rheology publication-title: Road Mater. Pavement Des. – volume: 35 start-page: 443 year: 2008 end-page: 453 ident: b0065 article-title: Operating speed models for two-lane rural roads in Pakistan publication-title: Can. J. Civ. Eng. – volume: 227 year: 2019 ident: b0025 article-title: Effect of organic reagents on high temperature rheological characteristics of organic rectorite modified asphalt publication-title: Constr. Build. Mater. – volume: 258 year: 2020 ident: b0030 article-title: Characteristics of compound asphalt modified by waste tire rubber (WTR) and ethylene vinyl acetate (EVA): Conventional, rheological, and microstructural properties publication-title: J. Clean. Prod. – reference: AASHTO-TP 62-07, “Determining Dynamic Modulus of Hot Mix Asphalt (HMA),” Am. Assoc. State Highw. Transp. Off., pp. 1–18, 2009. – volume: 21 start-page: 1069 year: 2020 end-page: 1082 ident: b0105 article-title: Study on understanding functional characteristics of multi-wall CNT modified asphalt binder publication-title: Int. J. Pavement Eng. – reference: , 226, pp. 793–801, 2019, doi:10.1016/j.conbuildmat.2019.07.252. – volume: 3 start-page: 918 year: 2010 end-page: 942 ident: b0070 article-title: Cement and Concrete Nanoscience and Nanotechnology publication-title: Materials (Basel) – volume: 193 start-page: 268 year: 2018 end-page: 275 ident: b0100 article-title: Nano-scale moisture damage evaluation of carbon nanotube-modified asphalt publication-title: Constr. Build. Mater. – reference: L. M. J. Mahdi, “Effect of Short Term Aging on Organic Montmorillonite Nanoclay Modified Asphalt,” Indian J. Sci. Technol., 6(11), pp. 1–9, 2013, doi:10.17485/ijst/2013/v6i11.13. – year: 1989 ident: b0260 article-title: Experimental design in behavioural research – volume: 39 year: 2011 ident: b0190 article-title: Evaluation of High Temperature Rheological Characteristics of Asphalt Binder with Carbon Nano Particles publication-title: J. Test. Eval. – reference: D. C. Montgomery, “Experimental Design for Product and Process Design and Development,” J. R. Stat. Soc. Ser. D (The Stat., 48(2), pp. 159–177, 1999, doi:10.1111/1467-9884.00179. – volume: 23 start-page: 2894 year: 2009 end-page: 2904 ident: b0165 article-title: Effects of nanoclay on rheological properties of bitumen binder publication-title: Constr. Build. Mater. – volume: 25 start-page: 1072 year: 2011 end-page: 1078 ident: b0170 article-title: Nanoclay-modified asphalt materials: Preparation and characterization publication-title: Constr. Build. Mater. – reference: C. F. J. W. Rahul Mukerjee, A Modern Theory of Factorial Designs. New York, NY: Springer New York, 2006. – reference: EN 12697-26, “Bituminous mixtures - Test methods for hot mix asphalt -Part 26: Stiffness,” Eur. Stand., no. June, p. 104, 2012. – reference: AASHTO T312, “Standard Method for Preparing and Determining the Density of Hot Mix Asphalt (HMA) Specimens By Means of the SHRP Gyratory Compactor (AASHTO T 312),” Am. Assoc. State Highw. Transp. Off. Washingt. DC, pp. 1–6, 2015. – volume: 24 start-page: 300 year: 2010 end-page: 307 ident: b0050 article-title: Rheological properties and storage stability of bitumen/SBS/montmorillonite composites publication-title: Constr. Build. Mater. – volume: 12 start-page: 533 year: 2011 end-page: 541 ident: b0185 article-title: Long-term ageing influence on rheological characteristics of asphalt binders containing carbon nanoparticles publication-title: Int. J. Pavement Eng. – reference: S. H. Mousavinezhad, G. H. Shafabakhsh, and O. Jafari Ani, “Nano-clay and styrene-butadiene-styrene modified bitumen for improvement of rutting performance in asphalt mixtures containing steel slag aggregates,” Constr. Build. Mater – volume: 24 start-page: 2060 year: 2010 end-page: 2071 ident: b0075 article-title: Nanotechnology in concrete - A review publication-title: Constr. Build. Mater. – reference: ASTM D 6931-12, “Standard Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures,” ASTM Int., no. Fixed desination D6981, pp. 1–5, 2007, 10.1520/D6931-12.2. – volume: 83 start-page: 207 year: 2015 end-page: 215 ident: b0195 article-title: Characterization of CNTs-modified HMA’s mechanical properties publication-title: Constr. Build. Mater. – volume: 101 start-page: 884 year: 2015 end-page: 891 ident: b0015 article-title: Rheological examination of aging in bitumen with inorganic nanoparticles and organic expanded vermiculite publication-title: Constr. Build. Mater. – volume: 53 start-page: 546 year: 2012 end-page: 555 ident: b0120 article-title: Rheological Characterization of Bituminous Binders Modified with Carbon Nanotubes publication-title: Procedia - Soc. Behav. Sci. – volume: 14 start-page: 85 year: 2021 end-page: 97 ident: b0110 article-title: Comparison of BBR results of EVA polymer and nano-CaCO3-modified bitumen using burger model, relaxation modulus, dissipation energy ratio, ANOVA, and artificial neural networks publication-title: Int. J. Pavement Res. Technol. – reference: F. Allhoff, P. Lin, and D. Moore, What is nanotechnology and why does it matter?: From science to ethics. 2009. – volume: 247 year: 2020 ident: b0045 article-title: Evaluation of rutting potential of flexible pavement structures using energy-based pseudo variables publication-title: Constr. Build. Mater. – volume: 1 start-page: 311 year: 1959 end-page: 341 ident: b0255 article-title: Use of Half-Normal Plots in Interpreting Factorial Two-Level Experiments publication-title: Technometrics – volume: 203 start-page: 552 year: 2019 end-page: 557 ident: b0055 article-title: Laboratory investigation of the recycled asphalt concrete with stable crumb rubber asphalt binder publication-title: Constr. Build. Mater. – reference: B. Shu, S. Wu, L. Pang, and B. Javilla, “The utilization of multiple-walled carbon nanotubes in polymer modified bitumen,” Materials (Basel)., 10(4), 2017, doi:10.3390/ma10040416. – reference: M. Iqbal, A. Hussain, A. Khattak, and K. Ahmad, “Improving the Aging Resistance of Asphalt by Addition of Polyethylene and Sulphur,” Civ. Eng. J., 6(5), pp. 1017–1030, 2020, doi:10.28991/cej-2020-03091525. – volume: 1 start-page: 119 year: 2000 end-page: 132 ident: b0060 article-title: Flexural Fatigue Characteristics of Asphalt Concrete with Crumb Rubber publication-title: Int. J. Pavement Eng. – volume: 19 start-page: 1499 year: 2018 end-page: 1522 ident: b0150 article-title: Investigating the performance, chemical, and microstructure properties of carbon nanotube-modified asphalt binder publication-title: Road Mater. Pavement Des. – reference: JTG E20 T0719, “Rutting Test of Asphalt Mixtures; Ministry of Transport of the People’s Republic of China: Beijing, China, 2011.,” 2011. – volume: 121 start-page: 361 year: 2016 end-page: 372 ident: b0155 article-title: Laboratory evaluation of asphalt binder modified with carbon nanotubes for Egyptian climate publication-title: Constr. Build. Mater. – volume: 29 start-page: 589 year: 2013 end-page: 594 ident: b0115 article-title: Nanomaterials Applied in Asphalt Modification: A Review publication-title: J. Mater. Sci. Technol. – volume: 24 start-page: 1019 year: 2017 end-page: 1026 ident: b0135 article-title: Application of nano silica to improve self-healing of asphalt mixes publication-title: J. Cent. South Univ. – volume: 21 start-page: 149 year: 2012 end-page: 154 ident: b0140 article-title: The addition effects of macro and nano clay on the performance of asphalt binder publication-title: Egypt. J. Pet. – reference: ASTM D 6925, “Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Giratory Compactor,” ASTM - Am. Soc. Test. Mater., vol. i, pp. 1–4, 2003. – volume: 143 start-page: 633 year: 2017 end-page: 648 ident: b0085 article-title: Developments of nano materials and technologies on asphalt materials – A review publication-title: Constr. Build. Mater. – volume: 381 start-page: 678 year: 1996 end-page: 680 ident: b0125 article-title: Exceptionally high Young’s modulus observed for individual carbon nanotubes publication-title: Nature – year: 2009 ident: b0245 article-title: A Comprehensive Guide to Factorial Two-Level Experimentation – volume: 16 start-page: 80 year: 2015 end-page: 90 ident: b0200 article-title: Fatigue properties of bituminous binders reinforced with carbon nanotubes publication-title: Int. J. Pavement Eng. – volume: 126 start-page: 245 year: 2016 end-page: 252 ident: b0160 article-title: Determining the effects of aging on halloysite nano-tube modified binders through the pull-off test method publication-title: Constr. Build. Mater. – volume: 1 start-page: 77 year: 2014 end-page: 88 ident: b0040 article-title: The impact of transport investments on competitiveness publication-title: Transp. Res. Procedia – ident: 10.1016/j.conbuildmat.2022.128882_b0225 – year: 2009 ident: 10.1016/j.conbuildmat.2022.128882_b0245 – ident: 10.1016/j.conbuildmat.2022.128882_b0250 – volume: 157 start-page: 277 year: 2017 ident: 10.1016/j.conbuildmat.2022.128882_b0090 article-title: Effect of nano silica and pretreated rubber on the properties of terminal blend crumb rubber modified asphalt publication-title: Constr. Build. Mater. doi: 10.1016/j.conbuildmat.2017.08.187 – ident: 10.1016/j.conbuildmat.2022.128882_b0215 – volume: 1 start-page: 311 issue: 4 year: 1959 ident: 10.1016/j.conbuildmat.2022.128882_b0255 article-title: Use of Half-Normal Plots in Interpreting Factorial Two-Level Experiments publication-title: Technometrics doi: 10.1080/00401706.1959.10489866 – volume: 1 start-page: 119 issue: 2 year: 2000 ident: 10.1016/j.conbuildmat.2022.128882_b0060 article-title: Flexural Fatigue Characteristics of Asphalt Concrete with Crumb Rubber publication-title: Int. J. Pavement Eng. doi: 10.1080/10298430008901701 – volume: 258 year: 2020 ident: 10.1016/j.conbuildmat.2022.128882_b0030 article-title: Characteristics of compound asphalt modified by waste tire rubber (WTR) and ethylene vinyl acetate (EVA): Conventional, rheological, and microstructural properties publication-title: J. Clean. Prod. doi: 10.1016/j.jclepro.2020.120732 – volume: 16 start-page: 80 issue: 1 year: 2015 ident: 10.1016/j.conbuildmat.2022.128882_b0200 article-title: Fatigue properties of bituminous binders reinforced with carbon nanotubes publication-title: Int. J. Pavement Eng. doi: 10.1080/10298436.2014.923099 – volume: 23 start-page: 2894 issue: 8 year: 2009 ident: 10.1016/j.conbuildmat.2022.128882_b0165 article-title: Effects of nanoclay on rheological properties of bitumen binder publication-title: Constr. Build. Mater. doi: 10.1016/j.conbuildmat.2009.02.027 – ident: 10.1016/j.conbuildmat.2022.128882_b0180 – volume: 14 start-page: 85 issue: 1 year: 2021 ident: 10.1016/j.conbuildmat.2022.128882_b0110 article-title: Comparison of BBR results of EVA polymer and nano-CaCO3-modified bitumen using burger model, relaxation modulus, dissipation energy ratio, ANOVA, and artificial neural networks publication-title: Int. J. Pavement Res. Technol. doi: 10.1007/s42947-020-0006-3 – volume: 12 start-page: 533 issue: 6 year: 2011 ident: 10.1016/j.conbuildmat.2022.128882_b0185 article-title: Long-term ageing influence on rheological characteristics of asphalt binders containing carbon nanoparticles publication-title: Int. J. Pavement Eng. doi: 10.1080/10298436.2011.560267 – year: 1989 ident: 10.1016/j.conbuildmat.2022.128882_b0260 – volume: 101 start-page: 884 year: 2015 ident: 10.1016/j.conbuildmat.2022.128882_b0015 article-title: Rheological examination of aging in bitumen with inorganic nanoparticles and organic expanded vermiculite publication-title: Constr. Build. Mater. doi: 10.1016/j.conbuildmat.2015.10.153 – volume: 1 start-page: 77 issue: 1 year: 2014 ident: 10.1016/j.conbuildmat.2022.128882_b0040 article-title: The impact of transport investments on competitiveness publication-title: Transp. Res. Procedia doi: 10.1016/j.trpro.2014.07.009 – volume: 24 start-page: 2060 issue: 11 year: 2010 ident: 10.1016/j.conbuildmat.2022.128882_b0075 article-title: Nanotechnology in concrete - A review publication-title: Constr. Build. Mater. doi: 10.1016/j.conbuildmat.2010.03.014 – volume: 24 start-page: 1019 issue: 5 year: 2017 ident: 10.1016/j.conbuildmat.2022.128882_b0135 article-title: Application of nano silica to improve self-healing of asphalt mixes publication-title: J. Cent. South Univ. doi: 10.1007/s11771-017-3504-y – ident: 10.1016/j.conbuildmat.2022.128882_b0230 – volume: 19 start-page: 1499 issue: 7 year: 2018 ident: 10.1016/j.conbuildmat.2022.128882_b0150 article-title: Investigating the performance, chemical, and microstructure properties of carbon nanotube-modified asphalt binder publication-title: Road Mater. Pavement Des. doi: 10.1080/14680629.2017.1323661 – volume: 21 start-page: 757 issue: 3 year: 2020 ident: 10.1016/j.conbuildmat.2022.128882_b0095 article-title: Effect of crumb tire rubber, microcrystalline synthetic wax, and nano silica on asphalt rheology publication-title: Road Mater. Pavement Des. doi: 10.1080/14680629.2018.1527718 – volume: 29 start-page: 589 issue: 7 year: 2013 ident: 10.1016/j.conbuildmat.2022.128882_b0115 article-title: Nanomaterials Applied in Asphalt Modification: A Review publication-title: J. Mater. Sci. Technol. doi: 10.1016/j.jmst.2013.04.008 – volume: 80 start-page: 30 year: 2015 ident: 10.1016/j.conbuildmat.2022.128882_b0205 article-title: Fatigue and healing properties of nano-reinforced bituminous binders publication-title: Int. J. Fatigue doi: 10.1016/j.ijfatigue.2015.05.008 – volume: 24 start-page: 300 issue: 3 year: 2010 ident: 10.1016/j.conbuildmat.2022.128882_b0050 article-title: Rheological properties and storage stability of bitumen/SBS/montmorillonite composites publication-title: Constr. Build. Mater. doi: 10.1016/j.conbuildmat.2009.08.032 – volume: 193 start-page: 268 year: 2018 ident: 10.1016/j.conbuildmat.2022.128882_b0100 article-title: Nano-scale moisture damage evaluation of carbon nanotube-modified asphalt publication-title: Constr. Build. Mater. doi: 10.1016/j.conbuildmat.2018.10.155 – ident: 10.1016/j.conbuildmat.2022.128882_b0010 doi: 10.3390/su12093531 – volume: 83 start-page: 207 year: 2015 ident: 10.1016/j.conbuildmat.2022.128882_b0195 article-title: Characterization of CNTs-modified HMA’s mechanical properties publication-title: Constr. Build. Mater. doi: 10.1016/j.conbuildmat.2015.03.035 – volume: 121 start-page: 361 year: 2016 ident: 10.1016/j.conbuildmat.2022.128882_b0155 article-title: Laboratory evaluation of asphalt binder modified with carbon nanotubes for Egyptian climate publication-title: Constr. Build. Mater. doi: 10.1016/j.conbuildmat.2016.05.168 – volume: 29 start-page: 281 issue: 4 year: 2004 ident: 10.1016/j.conbuildmat.2022.128882_b0130 article-title: Nanotubes and the Pursuit of Applications publication-title: MRS Bull. doi: 10.1557/mrs2004.81 – volume: 126 start-page: 245 year: 2016 ident: 10.1016/j.conbuildmat.2022.128882_b0160 article-title: Determining the effects of aging on halloysite nano-tube modified binders through the pull-off test method publication-title: Constr. Build. Mater. doi: 10.1016/j.conbuildmat.2016.09.038 – volume: 25 start-page: 1072 issue: 2 year: 2011 ident: 10.1016/j.conbuildmat.2022.128882_b0170 article-title: Nanoclay-modified asphalt materials: Preparation and characterization publication-title: Constr. Build. Mater. doi: 10.1016/j.conbuildmat.2010.06.070 – ident: 10.1016/j.conbuildmat.2022.128882_b0020 doi: 10.1016/j.conbuildmat.2019.07.252 – volume: 203 start-page: 552 year: 2019 ident: 10.1016/j.conbuildmat.2022.128882_b0055 article-title: Laboratory investigation of the recycled asphalt concrete with stable crumb rubber asphalt binder publication-title: Constr. Build. Mater. doi: 10.1016/j.conbuildmat.2019.01.114 – volume: 3 start-page: 918 issue: 2 year: 2010 ident: 10.1016/j.conbuildmat.2022.128882_b0070 article-title: Cement and Concrete Nanoscience and Nanotechnology publication-title: Materials (Basel) doi: 10.3390/ma3020918 – ident: 10.1016/j.conbuildmat.2022.128882_b0210 – volume: 381 start-page: 678 issue: 6584 year: 1996 ident: 10.1016/j.conbuildmat.2022.128882_b0125 article-title: Exceptionally high Young’s modulus observed for individual carbon nanotubes publication-title: Nature doi: 10.1038/381678a0 – volume: 53 start-page: 546 year: 2012 ident: 10.1016/j.conbuildmat.2022.128882_b0120 article-title: Rheological Characterization of Bituminous Binders Modified with Carbon Nanotubes publication-title: Procedia - Soc. Behav. Sci. doi: 10.1016/j.sbspro.2012.09.905 – ident: 10.1016/j.conbuildmat.2022.128882_b0145 doi: 10.3390/ma10040416 – volume: 227 year: 2019 ident: 10.1016/j.conbuildmat.2022.128882_b0025 article-title: Effect of organic reagents on high temperature rheological characteristics of organic rectorite modified asphalt publication-title: Constr. Build. Mater. doi: 10.1016/j.conbuildmat.2019.08.005 – volume: 21 start-page: 1069 issue: 9 year: 2020 ident: 10.1016/j.conbuildmat.2022.128882_b0105 article-title: Study on understanding functional characteristics of multi-wall CNT modified asphalt binder publication-title: Int. J. Pavement Eng. doi: 10.1080/10298436.2018.1519190 – ident: 10.1016/j.conbuildmat.2022.128882_b0035 doi: 10.28991/cej-2020-03091525 – volume: 39 issue: 4 year: 2011 ident: 10.1016/j.conbuildmat.2022.128882_b0190 article-title: Evaluation of High Temperature Rheological Characteristics of Asphalt Binder with Carbon Nano Particles publication-title: J. Test. Eval. – ident: 10.1016/j.conbuildmat.2022.128882_b0220 – volume: 21 start-page: 149 issue: 2 year: 2012 ident: 10.1016/j.conbuildmat.2022.128882_b0140 article-title: The addition effects of macro and nano clay on the performance of asphalt binder publication-title: Egypt. J. Pet. doi: 10.1016/j.ejpe.2012.11.008 – ident: 10.1016/j.conbuildmat.2022.128882_b0175 doi: 10.17485/ijst/2013/v6i11.13 – ident: 10.1016/j.conbuildmat.2022.128882_b0240 doi: 10.1111/1467-9884.00179 – volume: 229 start-page: 22 year: 2019 ident: 10.1016/j.conbuildmat.2022.128882_b0005 article-title: Recycling waste packaging tape into bituminous mixtures towards enhanced mechanical properties and environmental benefits publication-title: J. Clean. Prod. doi: 10.1016/j.jclepro.2019.04.409 – volume: 35 start-page: 443 issue: 5 year: 2008 ident: 10.1016/j.conbuildmat.2022.128882_b0065 article-title: Operating speed models for two-lane rural roads in Pakistan publication-title: Can. J. Civ. Eng. doi: 10.1139/L07-126 – ident: 10.1016/j.conbuildmat.2022.128882_b0235 – ident: 10.1016/j.conbuildmat.2022.128882_b0080 doi: 10.1002/9781444317992 – volume: 143 start-page: 633 year: 2017 ident: 10.1016/j.conbuildmat.2022.128882_b0085 article-title: Developments of nano materials and technologies on asphalt materials – A review publication-title: Constr. Build. Mater. doi: 10.1016/j.conbuildmat.2017.03.158 – volume: 247 year: 2020 ident: 10.1016/j.conbuildmat.2022.128882_b0045 article-title: Evaluation of rutting potential of flexible pavement structures using energy-based pseudo variables publication-title: Constr. Build. Mater. doi: 10.1016/j.conbuildmat.2020.118391 |
| SSID | ssj0006262 |
| Score | 2.4588442 |
| Snippet | •The efficacy of using Nano materials in Hot Mix Asphalt (HMA) was examined.•The effect of CNT and NC, loading frequency and temperature on dynamic modulus and... |
| SourceID | crossref elsevier |
| SourceType | Enrichment Source Index Database Publisher |
| StartPage | 128882 |
| SubjectTerms | Artificial Intelligence (AI) Dynamic modulus Hot Mix Asphalt (HMA) Nanomaterials Rutting |
| Title | Experimental investigation of nano materials applicability in Hot Mix Asphalt (HMA) |
| URI | https://dx.doi.org/10.1016/j.conbuildmat.2022.128882 |
| Volume | 350 |
| WOSCitedRecordID | wos000861324700001&url=https%3A%2F%2Fcvtisr.summon.serialssolutions.com%2F%23%21%2Fsearch%3Fho%3Df%26include.ft.matches%3Dt%26l%3Dnull%26q%3D |
| hasFullText | 1 |
| inHoldings | 1 |
| isFullTextHit | |
| isPrint | |
| journalDatabaseRights | – providerCode: PRVESC databaseName: Elsevier SD Freedom Collection Journals 2021 customDbUrl: eissn: 1879-0526 dateEnd: 99991231 omitProxy: false ssIdentifier: ssj0006262 issn: 0950-0618 databaseCode: AIEXJ dateStart: 19950201 isFulltext: true titleUrlDefault: https://www.sciencedirect.com providerName: Elsevier |
| link | http://cvtisr.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwtV3da9swEBdZO0b3MLqP0q5b0WAPG8FF_pQNfQklJR2kDNZB3ow-LOLS2CFN27C_fidL_ki30m7QFycI66zk9_Pp7iTdIfRZuZ7kSlJHeSxwAupzJ5FgyEnmE6E4SQgXVbEJenYWTybJ917vtj4Lc3NJiyJerZL5k0INbQC2Pjr7D3A3QqEBvgPocAXY4foo4IfdnP15m0bDGIYFK8o-WKlmJH27fl3tkK1OAI7KZX-crwC2uV5J1wboaDyo4wV1SoOyzTtbcYfb4tqt5CYgzaa5CV3fsrxpHUxnWR2QVgv2qyHoQpmA7Ph6ymYzJrtBCfBn9ZK6vxZd1PVsrGq1itY3KWatqoSJMTZ1h_7Q4iagcAEgFNX4YeyH-imHbZ_1zNl3ZrRmn2G9he0i7YhKtajUiHqGNj0aJqAONwenw8m3ZhIHP88zaRrN73iBPrVbA-8Z199Nm465cr6NXlk_Aw8MP16jXla8QS872Sffoh9dpuA1puBSYc0U3OCJ15gCd2NgCgamYMsU_AV48vUd-nkyPD8eObbGhiPAMFk6-ly1cknmBixKQkEkC6R0IyFcQoVPiIxDxuNIMtcVkrhwK_XiCNwMySVo7MzfQRtFWWS7CEeSU7COIy6oH4RhyLn-8JQAn53KmO2huP57UmET0Os6KJfpgzDtIa_pOjdZWB7T6ajGILXmpDETU-DZw93f_88z99FW-zp8QBvwLmYf0XNxs8yvFgeWZL8BjWGeMg |
| linkProvider | Elsevier |
| openUrl | ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Experimental+investigation+of+nano+materials+applicability+in+Hot+Mix+Asphalt+%28HMA%29&rft.jtitle=Construction+%26+building+materials&rft.au=Zahid%2C+Awais&rft.au=Ahmed%2C+Sarfraz&rft.au=Irfan%2C+Muhammad&rft.date=2022-10-03&rft.issn=0950-0618&rft.volume=350&rft.spage=128882&rft_id=info:doi/10.1016%2Fj.conbuildmat.2022.128882&rft.externalDBID=n%2Fa&rft.externalDocID=10_1016_j_conbuildmat_2022_128882 |
| thumbnail_l | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=0950-0618&client=summon |
| thumbnail_m | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=0950-0618&client=summon |
| thumbnail_s | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=0950-0618&client=summon |