Effect of Cr3C2 Content on Microstructure and Properties of Laser Cladding Ti(C, B)/Ni Coatings
In order to solve the problems of low hardness and poor wear resistance of titanium alloy, laser cladding technology was used to prepare Ti(C,B)/Ni coatings with different amount of Cr 3 C 2 on the surface of Ti-6Al-4V titanium alloy. The effects of Cr 3 C 2 content on the microstructure, hardness a...
Gespeichert in:
| Veröffentlicht in: | Journal of materials engineering and performance Jg. 31; H. 7; S. 5189 - 5200 |
|---|---|
| Hauptverfasser: | , , , , |
| Format: | Journal Article |
| Sprache: | Englisch |
| Veröffentlicht: |
New York
Springer US
01.07.2022
|
| Schlagworte: | |
| ISSN: | 1059-9495, 1544-1024 |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Abstract | In order to solve the problems of low hardness and poor wear resistance of titanium alloy, laser cladding technology was used to prepare Ti(C,B)/Ni coatings with different amount of Cr
3
C
2
on the surface of Ti-6Al-4V titanium alloy. The effects of Cr
3
C
2
content on the microstructure, hardness and wear resistance of Ti(C,B)/Ni coating were investigated by methods of scanning electron microscope (SEM), x-ray diffractometer (XRD), microhardness tester and M-200 wear tester. The results showed that phases existing in coating mainly contain γ-Ni, Ni
3
Ti, NiTi, TiB
2
, Ti(C,B) and CrB. With the increase of Cr
3
C
2
content, the size and number of black bulk precipitates in the coating reduced. Meanwhile, the short rod-like Ti(C,B) particles grew and the amount of the particles increased, and Ti(C,B) particles existed in the form of cellular dendritic crystals in the coating. The average microhardness of the cladding layer without Cr
3
C
2
addition is 896.7 HV
0.2
, which is about 1.5 times higher than that of Ti-6Al-4V substrate (360 HV
0.2
). With the increase of Cr
3
C
2
content (10, 20, 30 wt.%), the average microhardness of the coating increased to 948.7, 990.4 and 1035.8 HV
0.2
, respectively. The average hardness of the coating added 30 wt.%Cr
3
C
2
is 15.5% higher than that of the Cr
3
C
2
-free coating. At the same time, the wear resistance increased with the increase of Cr
3
C
2
content. |
|---|---|
| AbstractList | In order to solve the problems of low hardness and poor wear resistance of titanium alloy, laser cladding technology was used to prepare Ti(C,B)/Ni coatings with different amount of Cr
3
C
2
on the surface of Ti-6Al-4V titanium alloy. The effects of Cr
3
C
2
content on the microstructure, hardness and wear resistance of Ti(C,B)/Ni coating were investigated by methods of scanning electron microscope (SEM), x-ray diffractometer (XRD), microhardness tester and M-200 wear tester. The results showed that phases existing in coating mainly contain γ-Ni, Ni
3
Ti, NiTi, TiB
2
, Ti(C,B) and CrB. With the increase of Cr
3
C
2
content, the size and number of black bulk precipitates in the coating reduced. Meanwhile, the short rod-like Ti(C,B) particles grew and the amount of the particles increased, and Ti(C,B) particles existed in the form of cellular dendritic crystals in the coating. The average microhardness of the cladding layer without Cr
3
C
2
addition is 896.7 HV
0.2
, which is about 1.5 times higher than that of Ti-6Al-4V substrate (360 HV
0.2
). With the increase of Cr
3
C
2
content (10, 20, 30 wt.%), the average microhardness of the coating increased to 948.7, 990.4 and 1035.8 HV
0.2
, respectively. The average hardness of the coating added 30 wt.%Cr
3
C
2
is 15.5% higher than that of the Cr
3
C
2
-free coating. At the same time, the wear resistance increased with the increase of Cr
3
C
2
content. |
| Author | Yunlong, Liang Jian, Lin Hanguang, Fu Xingye, Guo Zhenguo, Xing |
| Author_xml | – sequence: 1 givenname: Liang surname: Yunlong fullname: Yunlong, Liang organization: Key Laboratory of Advanced Functional Materials, Ministry of Education, School of Materials Science and Engineering, Beijing University of Technology – sequence: 2 givenname: Fu surname: Hanguang fullname: Hanguang, Fu email: hgfu@bjut.edu.cn organization: Key Laboratory of Advanced Functional Materials, Ministry of Education, School of Materials Science and Engineering, Beijing University of Technology, Key Laboratory of High-Strength and Wear-Resistant Metal Materials of Hebei Province – sequence: 3 givenname: Xing surname: Zhenguo fullname: Zhenguo, Xing organization: Key Laboratory of High-Strength and Wear-Resistant Metal Materials of Hebei Province, Engineering Research Center of Hebei for Abrasion Resistant Metal Matrix Composite, Handan Huiqiao Composite Material Technology Co., Ltd – sequence: 4 givenname: Guo surname: Xingye fullname: Xingye, Guo organization: Key Laboratory of Advanced Functional Materials, Ministry of Education, School of Materials Science and Engineering, Beijing University of Technology – sequence: 5 givenname: Lin surname: Jian fullname: Jian, Lin organization: Key Laboratory of Advanced Functional Materials, Ministry of Education, School of Materials Science and Engineering, Beijing University of Technology |
| BookMark | eNp9kEtPAyEUhYmpiW31D7hiqYlYYBgcljqpj6Q-FnVNKHNpaCrTAF3035daVy66ujcn97s554zQIPQBELpm9J5R-jBJjElZE8o5oVJSQXZnaMhqIQijXAzKTmtFlFD1BRqltKIF4lwMkZ46Bzbj3uE2Vi3HbR8yhCIE_O5t7FOOW5u3EbAJHf6K_QZi9pAOxMwkiLhdm67zYYnn_qa9w0-3kw9f3phctHSJzp1ZJ7j6m2P0_Tydt69k9vny1j7OiOWcZaIqtRCKVkZZLrlUwFXDTOckgJHUNcCYWwgBpmssK0dK1lCbzlAFthJSVmPUHP8eLKcITlufi4WSJhq_1ozqQ1H6WJQuRenfovSuoPwfuon-x8Tdaag6QqkchyVEveq3MZSIp6g93Tx9TA |
| CitedBy_id | crossref_primary_10_1007_s11837_024_06985_6 crossref_primary_10_3390_ma16134542 crossref_primary_10_1007_s11665_025_10642_7 crossref_primary_10_3390_ma18133206 crossref_primary_10_1080_02670836_2022_2122175 crossref_primary_10_1007_s11665_024_10366_0 crossref_primary_10_3390_app15179308 crossref_primary_10_1016_j_surfcoat_2023_130005 crossref_primary_10_1016_j_surfcoat_2024_131047 crossref_primary_10_3390_met14101136 crossref_primary_10_1016_j_jmapro_2025_08_060 crossref_primary_10_1007_s11837_022_05610_8 crossref_primary_10_1016_j_optlastec_2022_108817 crossref_primary_10_1080_01694243_2024_2365419 |
| Cites_doi | 10.1080/00202967.2018.1502934 10.1007/s12613-013-0693-8 10.1016/j.surfcoat.2013.04.002 10.1016/j.matdes.2014.01.077 10.1016/j.materresbull.2013.02.026 10.1007/s00170-020-05380-0 10.1007/s11665-014-0987-7 10.1016/j.msea.2020.140145 10.1016/j.msea.2020.139185 10.1016/j.triboint.2018.02.031 10.1088/2053-1591/abe54e 10.1016/j.apsusc.2012.03.152 10.3390/ma10030281 10.1016/j.tsf.2011.01.034 10.1080/09507116.2010.540880 10.1016/j.ceramint.2020.08.186 10.1016/j.surfcoat.2011.01.031 10.1016/j.ijrmhm.2019.105112 10.1051/jp4:2004120034 10.1016/j.apsusc.2019.03.092 10.1016/j.jallcom.2011.01.199 10.1016/j.surfcoat.2021.127664 10.1016/j.apsusc.2008.10.006 10.1051/metal/2019060 10.1016/j.matlet.2016.08.075 10.1016/j.optlastec.2021.106915 10.1142/S0218625X18502074 10.1016/j.jallcom.2015.05.081 10.1063/1.1721448 10.1016/j.optlastec.2015.07.010 10.1016/j.matdes.2018.11.039 10.1515/secm-2015-0032 10.1016/j.triboint.2020.106719 10.3390/met10060705 10.1016/j.jmst.2021.01.015 10.1016/j.corsci.2020.108922 |
| ContentType | Journal Article |
| Copyright | ASM International 2022 |
| Copyright_xml | – notice: ASM International 2022 |
| DBID | AAYXX CITATION |
| DOI | 10.1007/s11665-022-06604-y |
| DatabaseName | CrossRef |
| DatabaseTitle | CrossRef |
| DatabaseTitleList | |
| DeliveryMethod | fulltext_linktorsrc |
| Discipline | Engineering |
| EISSN | 1544-1024 |
| EndPage | 5200 |
| ExternalDocumentID | 10_1007_s11665_022_06604_y |
| GroupedDBID | -4Y -58 -5G -BR -EM -Y2 -~C .4S .86 .DC .VR 06C 06D 0R~ 0VY 199 1N0 1SB 2.D 203 28- 29K 2J2 2JN 2JY 2KG 2KM 2LR 2VQ 2~H 30V 3V. 4.4 406 408 40D 40E 5GY 5VS 67Z 6NX 6TJ 78A 88I 8AF 8FE 8FG 8TC 8UJ 8WZ 95- 95. 95~ 96X 9M8 A6W AAAVM AABHQ AACDK AAHNG AAIAL AAIKT AAJBT AAJKR AANZL AARHV AARTL AASML AATNV AATVU AAUYE AAWCG AAYIU AAYQN AAYTO AAYZH ABAKF ABDZT ABECU ABFTD ABFTV ABHLI ABHQN ABJCF ABJNI ABJOX ABKCH ABMNI ABMQK ABNWP ABQBU ABQSL ABSXP ABTEG ABTHY ABTKH ABTMW ABULA ABUWG ABWNU ABXPI ACAOD ACBXY ACDTI ACGFS ACGOD ACHSB ACHXU ACIWK ACKNC ACMDZ ACMLO ACOKC ACOMO ACPIV ACSVP ACZOJ ADHHG ADHIR ADINQ ADKNI ADKPE ADRFC ADTPH ADURQ ADYFF ADZKW AEBTG AEFQL AEGAL AEGNC AEJHL AEJRE AEKMD AEMSY AENEX AEOHA AEPYU AESKC AETLH AEVLU AEXYK AFBBN AFEXP AFGCZ AFKRA AFLOW AFQWF AFWTZ AFZKB AGAYW AGDGC AGGDS AGJBK AGMZJ AGQEE AGQMX AGRTI AGWIL AGWZB AGYKE AHAVH AHBYD AHKAY AHSBF AHYZX AIAKS AIGIU AIIXL AILAN AITGF AJBLW AJRNO AJZVZ ALMA_UNASSIGNED_HOLDINGS ALWAN AMKLP AMXSW AMYLF AMYQR AOCGG ARCSS ARMRJ ASPBG AVWKF AXYYD AYJHY AZFZN AZQEC B-. BA0 BBWZM BDATZ BENPR BGLVJ BGNMA BPHCQ CAG CCPQU COF CS3 CSCUP CZ9 D-I D1I DDRTE DNIVK DPUIP DU5 DWQXO EBLON EBS EDO EIOEI EJD ESBYG F5P FEDTE FERAY FFXSO FIGPU FINBP FNLPD FRRFC FSGXE FWDCC G-Y G-Z GGCAI GGRSB GJIRD GNUQQ GNWQR GQ6 GQ7 H13 HCIFZ HF~ HG5 HG6 HMJXF HRMNR HVGLF HZ~ I-F IJ- IKXTQ ITM IWAJR IXC IZQ I~X I~Z J-C J0Z JBSCW JZLTJ KB. KC. KDC KOV L6V LLZTM M2P M4Y M7S MA- MK~ N2Q NB0 NDZJH NF0 NPVJJ NQJWS NU0 O9- O93 O9G O9I O9J OAM P19 P2P P9N PDBOC PF0 PQQKQ PROAC PT4 PT5 PTHSS Q2X QF4 QM1 QN7 QO4 QOK QOR QOS R4E R89 R9I RHV RIG RNI RNS ROL RPX RSV RZK S16 S1Z S26 S27 S28 S3B SAP SCG SCLPG SCM SDH SDM SHX SISQX SJYHP SNE SNPRN SNX SOHCF SOJ SPISZ SRMVM SSLCW STPWE SZN T13 T16 TSG TSK TSV TUC TUS U2A UG4 ULE UOJIU UTJUX UZXMN VC2 VFIZW VXZ W48 W4F WK8 XSW YLTOR Z45 Z5O Z7R Z7S Z7V Z7W Z7X Z7Y Z7Z Z81 Z83 Z85 Z86 Z88 Z8M Z8N Z8Q Z8R Z8T Z8W Z8Z Z92 ZMTXR ~EX AAPKM AAYXX ABBRH ABDBE ABFSG ABRTQ ACSTC ADHKG AEZWR AFDZB AFFHD AFHIU AFOHR AGQPQ AHPBZ AHWEU AIXLP ATHPR AYFIA CITATION PHGZM PHGZT PQGLB |
| ID | FETCH-LOGICAL-c221t-939b4903a9c26269e2981adf6eea60f8e11fb44ead8c1a9c965e5ada09ec34663 |
| IEDL.DBID | RSV |
| ISICitedReferencesCount | 14 |
| ISICitedReferencesURI | http://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=Summon&SrcAuth=ProQuest&DestLinkType=CitingArticles&DestApp=WOS_CPL&KeyUT=000749935100001&url=https%3A%2F%2Fcvtisr.summon.serialssolutions.com%2F%23%21%2Fsearch%3Fho%3Df%26include.ft.matches%3Dt%26l%3Dnull%26q%3D |
| ISSN | 1059-9495 |
| IngestDate | Tue Nov 18 21:43:00 EST 2025 Sat Nov 29 06:29:36 EST 2025 Fri Feb 21 02:45:44 EST 2025 |
| IsPeerReviewed | true |
| IsScholarly | true |
| Issue | 7 |
| Keywords | hardness C laser cladding microstructure wear resistance Ti(C,B)/Ni coatings Cr addition TiC |
| Language | English |
| LinkModel | DirectLink |
| MergedId | FETCHMERGED-LOGICAL-c221t-939b4903a9c26269e2981adf6eea60f8e11fb44ead8c1a9c965e5ada09ec34663 |
| PageCount | 12 |
| ParticipantIDs | crossref_citationtrail_10_1007_s11665_022_06604_y crossref_primary_10_1007_s11665_022_06604_y springer_journals_10_1007_s11665_022_06604_y |
| PublicationCentury | 2000 |
| PublicationDate | 20220700 2022-07-00 |
| PublicationDateYYYYMMDD | 2022-07-01 |
| PublicationDate_xml | – month: 7 year: 2022 text: 20220700 |
| PublicationDecade | 2020 |
| PublicationPlace | New York |
| PublicationPlace_xml | – name: New York |
| PublicationTitle | Journal of materials engineering and performance |
| PublicationTitleAbbrev | J. of Materi Eng and Perform |
| PublicationYear | 2022 |
| Publisher | Springer US |
| Publisher_xml | – name: Springer US |
| References | Liu, Ding, Qu (CR25) 2017; 10 Li, Chen, Lin (CR28) 2011; 509 Archard (CR36) 1953; 24 Ali, Hussein, Nofal (CR15) 2019; 116 Birger, Moskvitin, Polyakov, Arkhipov (CR9) 2011; 25 CR17 Xu, Song, Ma (CR31) 2021; 154 Li Jun, Zhihui (CR35) 2011; 519 Yi, Xing, Yu (CR37) 2018; 122 Zhu, Xue, Lan, Meng, Ren, Yang, Xu, Liu (CR12) 2021; 138 Zhu, Bo, Liu, Wang, Meng, Liang (CR10) 2021; 424 Yuan, Li (CR20) 2013; 228 Cai, Zhao, Yang (CR2) 2021; 81 Zhang, Yu, Chen (CR8) 2017; 24 Williams, Boyer (CR1) 2020; 10 Weng, Chen, Yu (CR11) 2014; 58 Sahoo, Jha, Sahoo (CR3) 2014; 23 Bai, Li, Chen (CR23) 2016; 76 An, Huang, Jiao (CR34) 2019; 162 Zhao, Yu, Sun, Jiang (CR18) 2020; 86 Du, Huang, Zhang (CR6) 2011; 205 Drezet, Pellerin, Bezençon (CR22) 2004; 120 Li, Wu, Liu (CR26) 2013; 48 Wang, Du, Liu (CR33) 2020; 176 Wang, Du, Liu (CR32) 2020; 780 Zhou, Bo, Liu, Yang, Wang, Wang (CR4) 2019; 481 Zhu, Wang, Jia (CR5) 2012; 262 Li, Zhang, Wang, Li (CR14) 2013; 20 Chaliampalias, Vourlias, Pavlidou (CR13) 2009; 255 Chen, Li, Liu (CR24) 2020; 47 Waqar, Wadood, Mateen (CR27) 2020; 108 Ping, Sun, Wang, Fu (CR29) 2019; 26 Qu, Li, Bai (CR30) 2015; 644 Ping, Fu (CR21) 2018; 96 Li, Sun, LI, Song (CR19) 2021; 8 Wang, Zhu, Yang (CR16) 2020; 797 Lee, Jang, Song, Kim, Jung (CR7) 2016; 185 6604_CR17 R Wang (6604_CR16) 2020; 797 S Waqar (6604_CR27) 2020; 108 JF Archard (6604_CR36) 1953; 24 K Wang (6604_CR32) 2020; 780 Q An (6604_CR34) 2019; 162 DG Cai (6604_CR2) 2021; 81 LZ Du (6604_CR6) 2011; 205 JC Williams (6604_CR1) 2020; 10 LL Bai (6604_CR23) 2016; 76 JN Li (6604_CR28) 2011; 509 YH Liu (6604_CR25) 2017; 10 PT Li (6604_CR26) 2013; 48 XL Ping (6604_CR21) 2018; 96 YL Yi (6604_CR37) 2018; 122 LJ Xu (6604_CR31) 2021; 154 ZY Zhou (6604_CR4) 2019; 481 EM Birger (6604_CR9) 2011; 25 Y Yuan (6604_CR20) 2013; 228 JM Drezet (6604_CR22) 2004; 120 LD Zhu (6604_CR12) 2021; 138 R Sahoo (6604_CR3) 2014; 23 Y Zhao (6604_CR18) 2020; 86 DM Li (6604_CR19) 2021; 8 HX Zhang (6604_CR8) 2017; 24 AS Ali (6604_CR15) 2019; 116 Y Zhu (6604_CR10) 2021; 424 T Chen (6604_CR24) 2020; 47 Yu Li Jun (6604_CR35) 2011; 519 K Wang (6604_CR33) 2020; 176 CC Qu (6604_CR30) 2015; 644 H Lee (6604_CR7) 2016; 185 F Weng (6604_CR11) 2014; 58 XL Ping (6604_CR29) 2019; 26 YH Zhu (6604_CR5) 2012; 262 J Li (6604_CR14) 2013; 20 D Chaliampalias (6604_CR13) 2009; 255 |
| References_xml | – volume: 96 start-page: 304 issue: 6 year: 2018 end-page: 312 ident: CR21 article-title: Effect of Nb Addition on Microstructure and Properties of Laser Cladding NiCrBSi Coatings publication-title: Trans. Inst. Met. Finish doi: 10.1080/00202967.2018.1502934 – volume: 20 start-page: 57 issue: 1 year: 2013 end-page: 64 ident: CR14 article-title: Microstructure and Mechanical Properties of Ni-Based Composite Coatings Reinforced by In Situ Synthesized TiB + TiC by laser cladding publication-title: Int. J. Miner. Metall. Mater. doi: 10.1007/s12613-013-0693-8 – volume: 228 start-page: 41 year: 2013 end-page: 47 ident: CR20 article-title: Analysis of Nucleation of Carbide (Cr, Fe)(7)C-3 in the Cr C /Fe-CrNiBSi Composite Coating publication-title: Surf. Coat. Technol. doi: 10.1016/j.surfcoat.2013.04.002 – volume: 58 start-page: 412 year: 2014 end-page: 425 ident: CR11 article-title: Research Status of Laser Cladding on Titanium and its Alloys: A Review publication-title: Mater. Des. doi: 10.1016/j.matdes.2014.01.077 – volume: 48 start-page: 2044 issue: 6 year: 2013 end-page: 2048 ident: CR26 article-title: Controlled Synthesis of Different Morphologies of TiB Microcrystals by Aluminum Melt Reaction Method publication-title: Mater. Res. Bull. doi: 10.1016/j.materresbull.2013.02.026 – volume: 108 start-page: 625 issue: 3 year: 2020 end-page: 634 ident: CR27 article-title: Effects of Ni and Cr addition on the Wear Performance of NiTi Alloy publication-title: Int. J. Adv. Manuf. Technol. doi: 10.1007/s00170-020-05380-0 – volume: 23 start-page: 2092 issue: 6 year: 2014 end-page: 2102 ident: CR3 article-title: Effect of Microstructural Variation on Dry Sliding Wear Behavior of Ti-6Al-4V Alloy publication-title: J. Mater. Eng. Perform. doi: 10.1007/s11665-014-0987-7 – volume: 797 start-page: 140 year: 2020 end-page: 145 ident: CR16 article-title: Novel Selective Laser Melting Processed In-Situ TiC Particle-Reinforced Ni Matrix Composite with Excellent Processability and Mechanical Properties publication-title: Mater. Sci. Eng. doi: 10.1016/j.msea.2020.140145 – volume: 780 start-page: 139185 year: 2020 ident: CR32 article-title: Microstructure and Mechanical Properties of High Chromium Nickel-Based Superalloy Fabricated by Laser Metal Deposition publication-title: Mater. Sci. Eng. doi: 10.1016/j.msea.2020.139185 – volume: 122 start-page: 179 year: 2018 end-page: 188 ident: CR37 article-title: Effect of Casting Thickness on Microstructure, Mechanical Properties and Abrasion Resistance of Fe-B Cast Alloy publication-title: Tribol. Int. doi: 10.1016/j.triboint.2018.02.031 – volume: 8 start-page: 026516 issue: 2 year: 2021 ident: CR19 article-title: Effect of TiC Content on the Microstructure and Properties of Large-Area Laser-Cladded TiC Ni-Based Composite Coatings publication-title: Mater. Res. Express doi: 10.1088/2053-1591/abe54e – volume: 262 start-page: 156 year: 2012 end-page: 158 ident: CR5 article-title: Deposition of TiC Film on Titanium for Abrasion Resistant Implant Material by Ion-Enhanced Triode Plasma CVD publication-title: Appl. Surf. Sci. doi: 10.1016/j.apsusc.2012.03.152 – volume: 10 start-page: 1 issue: 3 year: 2017 end-page: 9 ident: CR25 article-title: Microstructure Evolution of TiC Particles in situ publication-title: Synthesized Laser Cladd. Mater. doi: 10.3390/ma10030281 – volume: 519 start-page: 4804 issue: 15 year: 2011 end-page: 4808 ident: CR35 article-title: Wear Behaviors of on (TiB+TiC)/Ti Composite Coating Fabricated on Ti6Al4V by Laser Cladding publication-title: Thin Solid Films doi: 10.1016/j.tsf.2011.01.034 – volume: 25 start-page: 234 issue: 3 year: 2011 end-page: 243 ident: CR9 article-title: Industrial Laser Cladding: Current State and Future publication-title: Weld. Int. doi: 10.1080/09507116.2010.540880 – volume: 47 start-page: 755 issue: 1 year: 2020 end-page: 768 ident: CR24 article-title: Effects of Heat Treatment on Microstructure and Mechanical Properties of TiC/TiB Composite Bioinert Ceramic Coatings In-Situ Synthesized By Laser Cladding on Ti6Al4V publication-title: Ceram. Int. doi: 10.1016/j.ceramint.2020.08.186 – volume: 205 start-page: 3722 year: 2011 end-page: 3728 ident: CR6 article-title: Preparation and Wearperformance of NiCr/Cr C -NiCr/hBN Plasma Sprayed Compositecoating publication-title: Surf. Coat. Technol. doi: 10.1016/j.surfcoat.2011.01.031 – volume: 86 start-page: 105 year: 2020 end-page: 112 ident: CR18 article-title: Microstructure and Properties of Laser Cladded B4C/TiC/Ni-Based Composite Coating publication-title: Int. J. Refract. Met. Hard Mater. doi: 10.1016/j.ijrmhm.2019.105112 – volume: 120 start-page: 299 year: 2004 end-page: 306 ident: CR22 article-title: Modelling the Marangoni convection in Laser Heat Treatment publication-title: J. Phys. doi: 10.1051/jp4:2004120034 – volume: 424 start-page: 127664 year: 2021 ident: CR10 article-title: Development and Characterization of Co-Cu/Ti3SiC2 Self-Lubricating Wear Resistant Composite Coatings on Ti6Al4V Alloy by Laser Cladding publication-title: Surf. Coat. Technol. doi: 10.1016/j.apsusc.2019.03.092 – volume: 509 start-page: 4882 issue: 14 year: 2011 end-page: 4886 ident: CR28 article-title: Phase Constituents and Microstructure of Laser Cladding Al O /Ti Al Reinforced Ceramic Layer on Titanium Alloy publication-title: J. Alloys Compd. doi: 10.1016/j.jallcom.2011.01.199 – volume: 481 start-page: 209 year: 2019 end-page: 218 ident: CR4 article-title: Preparation and High Temperature Tribological Properties of Laser Insitu Synthesized Self-Lubricating Composite Coatings Containing Metal sulfides on Ti6Al4V alloy publication-title: Appl. Surf. Sci. doi: 10.1016/j.surfcoat.2021.127664 – volume: 255 start-page: 3605 year: 2009 end-page: 3612 ident: CR13 article-title: Comparative examination of the Microstructure and High Temperature Oxidation Performance of NiCrBSi Flame Sprayed and Pack Cementation Coatings publication-title: Appl. Surf. Sci. doi: 10.1016/j.apsusc.2008.10.006 – volume: 116 start-page: 634 issue: 6 year: 2019 end-page: 646 ident: CR15 article-title: A Contribution to Laser Cladding of Ti-6Al-4V Titanium Alloy publication-title: Metall. Res. Technol. doi: 10.1051/metal/2019060 – volume: 185 start-page: 21 year: 2016 end-page: 24 ident: CR7 article-title: Multi-scale Porous Ti6Al4V Scaffolds with Enhanced Strength and Biocompatibility Formed via Dynamic Freeze-Casting Coupled with Micro-Arc Oxidation publication-title: Mater. Lett. doi: 10.1016/j.matlet.2016.08.075 – volume: 138 start-page: 106915 year: 2021 ident: CR12 article-title: Recent Research and Development Status of Laser Cladding: A review publication-title: Opt. Laser Technol. doi: 10.1016/j.optlastec.2021.106915 – ident: CR17 – volume: 26 start-page: 1850207 issue: 6 year: 2019 ident: CR29 article-title: Effect of Cr C Addition on the Microstructure and Properties of Laser Cladding NiCrBSi Coatings publication-title: Surf. Rev. Lett. doi: 10.1142/S0218625X18502074 – volume: 644 start-page: 450 year: 2015 end-page: 463 ident: CR30 article-title: Chen Effects of the Thickness of the Pre-Placed Layer on Microstructural Evolution and Mechanical Properties of the Laser-Clad Coatings publication-title: J Alloys Compd doi: 10.1016/j.jallcom.2015.05.081 – volume: 24 start-page: 981 year: 1953 end-page: 988 ident: CR36 article-title: Contact and Rubbing of flat Surfaces publication-title: J. Appl. Phys. doi: 10.1063/1.1721448 – volume: 76 start-page: 33 year: 2016 end-page: 45 ident: CR23 article-title: Effect of the Content of B C on Microstructural Evolution and Wear Behaviors of the Laser-Clad Coatings Fabricated on Ti6Al4V publication-title: Opt. Laser Technol. doi: 10.1016/j.optlastec.2015.07.010 – volume: 162 start-page: 33 year: 2019 end-page: 44 ident: CR34 article-title: Intergrowth Microstructure and Superior Wear Resistance of (TiB + TiC)/Ti64 Hybrid Coatings by Gas Tungsten Arc Cladding publication-title: Mater. Des. doi: 10.1016/j.matdes.2018.11.039 – volume: 24 start-page: 541 issue: 4 year: 2017 end-page: 546 ident: CR8 article-title: Microstructure and Wear Resistance of Composite Coating by Laser Cladding Ni60A/B C Pre-Placed Powders on Ti-6Al-4V Substrate publication-title: Sci. Eng. Compos. Mater. doi: 10.1515/secm-2015-0032 – volume: 154 start-page: 106719 year: 2021 ident: CR31 article-title: Effect of Slippage Rate on Frictional Wear Behaviors of High-Speed Steel with Dual-Scale Tungsten Carbides (M6C) Under High-Pressure Sliding-Rolling condition publication-title: Tribol. Int. doi: 10.1016/j.triboint.2020.106719 – volume: 10 start-page: 705 issue: 6 year: 2020 end-page: 727 ident: CR1 article-title: Opportunities and Issues in the Application of Titanium Alloys for Aerospace Components publication-title: Metals doi: 10.3390/met10060705 – volume: 81 start-page: 13 year: 2021 end-page: 25 ident: CR2 article-title: A Novel Biomedical Titanium Alloy with High Antibacterial Property and Low Elastic Modulus publication-title: J. Mater. Sci. Technol. doi: 10.1016/j.jmst.2021.01.015 – volume: 176 start-page: 108922 year: 2020 ident: CR33 article-title: High-Temperature Oxidation Behaviour of High Chromium Superalloys Additively Manufactured by Conventional or Extreme High-Speed Laser Metal Deposition publication-title: Corros. Sci. doi: 10.1016/j.corsci.2020.108922 – volume: 10 start-page: 705 issue: 6 year: 2020 ident: 6604_CR1 publication-title: Metals doi: 10.3390/met10060705 – volume: 23 start-page: 2092 issue: 6 year: 2014 ident: 6604_CR3 publication-title: J. Mater. Eng. Perform. doi: 10.1007/s11665-014-0987-7 – volume: 24 start-page: 541 issue: 4 year: 2017 ident: 6604_CR8 publication-title: Sci. Eng. Compos. Mater. doi: 10.1515/secm-2015-0032 – volume: 120 start-page: 299 year: 2004 ident: 6604_CR22 publication-title: J. Phys. doi: 10.1051/jp4:2004120034 – volume: 262 start-page: 156 year: 2012 ident: 6604_CR5 publication-title: Appl. Surf. Sci. doi: 10.1016/j.apsusc.2012.03.152 – volume: 10 start-page: 1 issue: 3 year: 2017 ident: 6604_CR25 publication-title: Synthesized Laser Cladd. Mater. doi: 10.3390/ma10030281 – volume: 424 start-page: 127664 year: 2021 ident: 6604_CR10 publication-title: Surf. Coat. Technol. doi: 10.1016/j.apsusc.2019.03.092 – volume: 96 start-page: 304 issue: 6 year: 2018 ident: 6604_CR21 publication-title: Trans. Inst. Met. Finish doi: 10.1080/00202967.2018.1502934 – volume: 47 start-page: 755 issue: 1 year: 2020 ident: 6604_CR24 publication-title: Ceram. Int. doi: 10.1016/j.ceramint.2020.08.186 – volume: 81 start-page: 13 year: 2021 ident: 6604_CR2 publication-title: J. Mater. Sci. Technol. doi: 10.1016/j.jmst.2021.01.015 – volume: 780 start-page: 139185 year: 2020 ident: 6604_CR32 publication-title: Mater. Sci. Eng. doi: 10.1016/j.msea.2020.139185 – volume: 25 start-page: 234 issue: 3 year: 2011 ident: 6604_CR9 publication-title: Weld. Int. doi: 10.1080/09507116.2010.540880 – volume: 8 start-page: 026516 issue: 2 year: 2021 ident: 6604_CR19 publication-title: Mater. Res. Express doi: 10.1088/2053-1591/abe54e – volume: 122 start-page: 179 year: 2018 ident: 6604_CR37 publication-title: Tribol. Int. doi: 10.1016/j.triboint.2018.02.031 – volume: 86 start-page: 105 year: 2020 ident: 6604_CR18 publication-title: Int. J. Refract. Met. Hard Mater. doi: 10.1016/j.ijrmhm.2019.105112 – volume: 185 start-page: 21 year: 2016 ident: 6604_CR7 publication-title: Mater. Lett. doi: 10.1016/j.matlet.2016.08.075 – volume: 138 start-page: 106915 year: 2021 ident: 6604_CR12 publication-title: Opt. Laser Technol. doi: 10.1016/j.optlastec.2021.106915 – volume: 26 start-page: 1850207 issue: 6 year: 2019 ident: 6604_CR29 publication-title: Surf. Rev. Lett. doi: 10.1142/S0218625X18502074 – volume: 797 start-page: 140 year: 2020 ident: 6604_CR16 publication-title: Mater. Sci. Eng. doi: 10.1016/j.msea.2020.140145 – volume: 205 start-page: 3722 year: 2011 ident: 6604_CR6 publication-title: Surf. Coat. Technol. doi: 10.1016/j.surfcoat.2011.01.031 – volume: 58 start-page: 412 year: 2014 ident: 6604_CR11 publication-title: Mater. Des. doi: 10.1016/j.matdes.2014.01.077 – volume: 162 start-page: 33 year: 2019 ident: 6604_CR34 publication-title: Mater. Des. doi: 10.1016/j.matdes.2018.11.039 – volume: 481 start-page: 209 year: 2019 ident: 6604_CR4 publication-title: Appl. Surf. Sci. doi: 10.1016/j.surfcoat.2021.127664 – volume: 255 start-page: 3605 year: 2009 ident: 6604_CR13 publication-title: Appl. Surf. Sci. doi: 10.1016/j.apsusc.2008.10.006 – volume: 76 start-page: 33 year: 2016 ident: 6604_CR23 publication-title: Opt. Laser Technol. doi: 10.1016/j.optlastec.2015.07.010 – volume: 24 start-page: 981 year: 1953 ident: 6604_CR36 publication-title: J. Appl. Phys. doi: 10.1063/1.1721448 – volume: 644 start-page: 450 year: 2015 ident: 6604_CR30 publication-title: J Alloys Compd doi: 10.1016/j.jallcom.2015.05.081 – volume: 108 start-page: 625 issue: 3 year: 2020 ident: 6604_CR27 publication-title: Int. J. Adv. Manuf. Technol. doi: 10.1007/s00170-020-05380-0 – volume: 20 start-page: 57 issue: 1 year: 2013 ident: 6604_CR14 publication-title: Int. J. Miner. Metall. Mater. doi: 10.1007/s12613-013-0693-8 – volume: 176 start-page: 108922 year: 2020 ident: 6604_CR33 publication-title: Corros. Sci. doi: 10.1016/j.corsci.2020.108922 – volume: 48 start-page: 2044 issue: 6 year: 2013 ident: 6604_CR26 publication-title: Mater. Res. Bull. doi: 10.1016/j.materresbull.2013.02.026 – volume: 116 start-page: 634 issue: 6 year: 2019 ident: 6604_CR15 publication-title: Metall. Res. Technol. doi: 10.1051/metal/2019060 – ident: 6604_CR17 – volume: 509 start-page: 4882 issue: 14 year: 2011 ident: 6604_CR28 publication-title: J. Alloys Compd. doi: 10.1016/j.jallcom.2011.01.199 – volume: 154 start-page: 106719 year: 2021 ident: 6604_CR31 publication-title: Tribol. Int. doi: 10.1016/j.triboint.2020.106719 – volume: 228 start-page: 41 year: 2013 ident: 6604_CR20 publication-title: Surf. Coat. Technol. doi: 10.1016/j.surfcoat.2013.04.002 – volume: 519 start-page: 4804 issue: 15 year: 2011 ident: 6604_CR35 publication-title: Thin Solid Films doi: 10.1016/j.tsf.2011.01.034 |
| SSID | ssj0007224 |
| Score | 2.372299 |
| Snippet | In order to solve the problems of low hardness and poor wear resistance of titanium alloy, laser cladding technology was used to prepare Ti(C,B)/Ni coatings... |
| SourceID | crossref springer |
| SourceType | Enrichment Source Index Database Publisher |
| StartPage | 5189 |
| SubjectTerms | Characterization and Evaluation of Materials Chemistry and Materials Science Corrosion and Coatings Engineering Design Materials Science Quality Control Reliability Safety and Risk Technical Article Tribology |
| Title | Effect of Cr3C2 Content on Microstructure and Properties of Laser Cladding Ti(C, B)/Ni Coatings |
| URI | https://link.springer.com/article/10.1007/s11665-022-06604-y |
| Volume | 31 |
| WOSCitedRecordID | wos000749935100001&url=https%3A%2F%2Fcvtisr.summon.serialssolutions.com%2F%23%21%2Fsearch%3Fho%3Df%26include.ft.matches%3Dt%26l%3Dnull%26q%3D |
| hasFullText | 1 |
| inHoldings | 1 |
| isFullTextHit | |
| isPrint | |
| journalDatabaseRights | – providerCode: PRVAVX databaseName: SpringerLink Contemporary customDbUrl: eissn: 1544-1024 dateEnd: 99991231 omitProxy: false ssIdentifier: ssj0007224 issn: 1059-9495 databaseCode: RSV dateStart: 19970101 isFulltext: true titleUrlDefault: https://link.springer.com/search?facet-content-type=%22Journal%22 providerName: Springer Nature |
| link | http://cvtisr.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV3dS8MwEA86fdAHv8X5RR58ULTYpGnWPGpx-DDH0Cl7K2mayGB00k5h_72XfmwOZKCv5RLCfeTumrvfIXRhJOfM1ZDkcBU4LBZgc5Jox_e1l_g0VtoUku60ut1gMBC9qiksr6vd6yfJ4qaeN7sRzm03MbVd8y5zpqtoDdxdYAc2PL-8ze7fFi1H2ULg4AiI_6tWmd_3WHRHi2-hhYtpb__vcDtoqwop8V2pA7toRad7aPMH0OA-ikqQYjw2OMy8kOIClCqFDyl-siV5JYzsZ6axTBPcs3_oMwu1ald0wNFlOBzZ0qP0HfeHl-ENvr-67Q5hG2nLpvMD9Np-6IePTjVawVGUkokjPBEz4XpSKAopjdBUBEQmhmstuWsCTYiJGQM1CxQBIsF97ctEukIrj0GUcoga6TjVRwh7zDDmShVIsDdDuYSEj6kWYcaiuxneRKTmcKQq3HE7_mIUzRGTLfMiYF5UMC-aNtH1bM1HibqxlPqmFkpUWWC-hPz4b-QnaIMWcrUluqeoAfLQZ2hdfU2GeXZeqN43EgfRiw |
| linkProvider | Springer Nature |
| linkToHtml | http://cvtisr.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV3dS8MwEA86BfXBb3F-5sEHRYtNmmbNoxbHxG4MnbK3kqaJDEYn7RT235v0Y3MgA30tlxDuI3fX3P0OgAvFKSW21EkOFZ5FIqZtjiNpua50YhdHQqpc0kGj0_H6fdYtm8Kyqtq9epLMb-pZsxui1HQTY9M1bxNrsgxWiPZYBjH_-eVtev82cDHKVgcOFtPxf9kq8_se8-5o_i00dzHNrf8dbhtsliElvCt0YAcsyWQXbPwAGtwDYQFSDEcK-qnjY5iDUiX6QwLbpiSvgJH9TCXkSQy75g99aqBWzYpAO7oU-kNTepS8w97g0r-B91e3nYHehpuy6WwfvDYfen7LKkcrWAJjNLaYwyLCbIczgXVKwyRmHuKxolJyaitPIqQiQrSaeQJpIkZd6fKY20wKh-go5QDUklEiDwF0iCLE5sLj2t4UplwnfEQ0EFEG3U3ROkAVh0NR4o6b8RfDcIaYbJgXauaFOfPCSR1cT9d8FKgbC6lvKqGEpQVmC8iP_kZ-DtZavXYQBo-dp2OwjnMZm3LdE1DTspGnYFV8jQdZepar4Tft_dRv |
| linkToPdf | http://cvtisr.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwpV3dS8MwEA86RfTBb3F-5sEHxZU1aZo1j1odinMMnLK3kKaJDEY3uinsvzdpuy-Qgfh-Ocp95O6au98BcKUFpcRVpsihMnBIxIzPCaQc31de7ONIKp1pulFrNoNOh7XmpvizbvfJk2Q-02BRmpJRdRDr6mzwDVFqJ4uxnaB3iTNeBWvENtLbev3tY3oX13C-1tYkEQ4ztUAxNvM7j8XQtPgumoWb-s7_P3QXbBepJrzLbWMPrKhkH2zNARAeAJ6DF8O-hmHqhRiGOXfYT-CrbdXL4WW_UgVFEsOW_XOfWghWe6JhAmAKw55tSUo-Ybt7HVbg_U212TVshG2nHh6C9_pjO3xyipULjsQYjRzmsYgw1xNMYlPqMIVZgESsqVKCujpQCOmIEGN-gUSGiFFf-SIWLlPSIyZ7OQKlpJ-oYwA9oglxhQyE8UONqTCFIJE1RLRFfdO0DNBE2lwWeOR2LUaPz5CUrfC4ER7PhMfHZXA7PTPI0TiWUlcmCuKFZw6XkJ_8jfwSbLQe6rzx3Hw5BZs4U7Ht4j0DJaMadQ7W5feoO0wvMov8AU9A3VM |
| openUrl | ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Effect+of+Cr3C2+Content+on+Microstructure+and+Properties+of+Laser+Cladding+Ti%28C%2C+B%29%2FNi+Coatings&rft.jtitle=Journal+of+materials+engineering+and+performance&rft.au=Yunlong%2C+Liang&rft.au=Hanguang%2C+Fu&rft.au=Zhenguo%2C+Xing&rft.au=Xingye%2C+Guo&rft.date=2022-07-01&rft.issn=1059-9495&rft.eissn=1544-1024&rft.volume=31&rft.issue=7&rft.spage=5189&rft.epage=5200&rft_id=info:doi/10.1007%2Fs11665-022-06604-y&rft.externalDBID=n%2Fa&rft.externalDocID=10_1007_s11665_022_06604_y |
| thumbnail_l | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=1059-9495&client=summon |
| thumbnail_m | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=1059-9495&client=summon |
| thumbnail_s | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=1059-9495&client=summon |