Automatic Calibration of Groundwater Models With Bias Correction and Data Filtering: Working With Drawdown Data

The drawdown response to a hydraulic stress contains crucial information to characterize an aquifer. Modeling drawdowns is far easier than modeling heads because they are subject to homogeneous (zero) internal sink/sources, and boundary and initial conditions. The problem lies on the fact that drawd...

Celý popis

Uložené v:
Podrobná bibliografia
Vydané v:Water resources research Ročník 57; číslo 3
Hlavní autori: Trabucchi, Michela, Fernàndez‐Garcia, Daniel, Carrera, Jesús
Médium: Journal Article
Jazyk:English
Vydavateľské údaje: Washington John Wiley & Sons, Inc 01.03.2021
Predmet:
Algorithms
Aquifers
Bias
Calibration
complex aquifer systems
Complex systems
Data
data filtering
Drawdown
Errors
evolution
Groundwater
groundwater modeling
Groundwater models
head
head measurements
hydrologic models
Initial conditions
inverse problem
Inverse problems
Iterative methods
Mathematical models
Modelling
Optimization
Parameters
Systematic errors
Transmissivity
ISSN:0043-1397, 1944-7973
On-line prístup:Získať plný text
Tagy: Pridať tag
Žiadne tagy, Buďte prvý, kto otaguje tento záznam!
Popis
Shrnutí:The drawdown response to a hydraulic stress contains crucial information to characterize an aquifer. Modeling drawdowns is far easier than modeling heads because they are subject to homogeneous (zero) internal sink/sources, and boundary and initial conditions. The problem lies on the fact that drawdowns are not measured directly but derived from measurements of head fluctuations. Resulting drawdowns may suffer persistent inaccuracies in complex systems with uncertain long‐acting external stresses, so that they are affected not only by errors in head measurements, but also in estimates of the natural head evolution. This hinders the use of drawdowns in groundwater models, and forces modelers to employ absolute heads and soft information. In this context, we present a method to filter systematic errors in drawdown data during the calibration of a groundwater model. To do this, we introduce a bias correction term in a composite inverse problem that combines a natural head model with a drawdown model. Since these two models share the same parameters, a two‐stage iterative optimization algorithm is developed to jointly estimate the bias, natural trends, and parameters. The method is illustrated by a synthetic example in a heterogeneous aquifer. The example shows that the method converges to the best conditional estimate even when absolute head data is strongly biased. In the same example, we demonstrate that the use of biased absolute head data in the traditional inverse problem can also provide good fittings but, in this case, the bias leads to an incorrect estimation of the transmissivity field. Key Points We estimates drawdowns caused by hydraulic testing to characterize a complex aquifer system We employ a numerical groundwater model to calculate natural heads to de‐trend head measurements We introduce a corrective factor to remove errors that arise in the modeling and measuring process
Bibliografia:ObjectType-Article-1
SourceType-Scholarly Journals-1
ObjectType-Feature-2
content type line 14
content type line 23
ISSN:0043-1397
1944-7973
DOI:10.1029/2020WR028097