Zobrazit v EDS

Dynamic vehicle–track interaction and structural loading in a crossing panel–calibration and assessment of a model with a 3D representation of the crossing rail

Uloženo v:
Podrobná bibliografie
Název: Dynamic vehicle–track interaction and structural loading in a crossing panel–calibration and assessment of a model with a 3D representation of the crossing rail
Autoři: Vilhelmson, Henrik, 1997, Pålsson, Björn, 1981, Nielsen, Jens, 1963, Ossberger, Uwe, Sehner, Michael, Loy, Harald
Zdroj: Vehicle System Dynamics. 62(12):3168-3190
Témata: dynamic vehicle–track interaction, multibody simulation, switches & crossings, turnout, Railway, 3D finite element model
Popis: A three-dimensional (3D) finite element model of a railway crossing panel for use in multibody simulation (MBS) of dynamic vehicle–track interaction is presented. It is a two-layer track model with stock rails and sleepers represented by beam elements and a crossing rail represented by 3D solid elements. The track model uses linear bushings for the rail fastenings and bi-linear bushings for the ballast to allow for potentially voided sleepers. Based on the output from the MBS, the structural loading of the crossing in terms of strains, stresses and sleeper-ballast contact pressures is extracted in a post-processing step. The model is calibrated and validated to measurement data from a comprehensively instrumented switch & crossing (S&C) demonstrator installed in the Austrian railway network as a part of the European research programme Shift2Rail. The applied procedure for the calibration and critical assessment of the crossing model is described in detail. It is based on a model parameterisation with eight parameters relating to the rail fastening and foundation stiffnesses and to a distribution of the ballast voids. The calibration method uses Latin hypercube samples to explore the parameter space in a sensitivity analysis before a parameter optimisation is performed using a gradient-based method on a response surface built from a polyharmonic spline. In a comparative study it is shown that the 3D model and a more conventional beam model of the crossing rail show similar calibration results and good agreement with the measured data. The 3D model allows for the extraction of stress concentrations in the crossing rail but has an increased computational time of about 30% compared to the beam model.
Popis souboru: electronic
Přístupová URL adresa: https://research.chalmers.se/publication/540267
https://research.chalmers.se/publication/540267/file/540267_Fulltext.pdf
Databáze: SwePub
FullText Text:
  Availability: 0
CustomLinks:
  – Url: https://research.chalmers.se/publication/540267#
    Name: EDS - SwePub (s4221598)
    Category: fullText
    Text: View record in SwePub
  – Url: https://resolver.ebscohost.com/openurl?sid=EBSCO:edsswe&genre=article&issn=17445159&ISBN=&volume=62&issue=12&date=20240101&spage=3168&pages=3168-3190&title=Vehicle System Dynamics&atitle=Dynamic%20vehicle%E2%80%93track%20interaction%20and%20structural%20loading%20in%20a%20crossing%20panel%E2%80%93calibration%20and%20assessment%20of%20a%20model%20with%20a%203D%20representation%20of%20the%20crossing%20rail&aulast=Vilhelmson%2C%20Henrik&id=DOI:10.1080/00423114.2024.2319275
    Name: Full Text Finder
    Category: fullText
    Text: Full Text Finder
    Icon: https://imageserver.ebscohost.com/branding/images/FTF.gif
    MouseOverText: Full Text Finder
  – Url: https://www.webofscience.com/api/gateway?GWVersion=2&SrcApp=EBSCO&SrcAuth=EBSCO&DestApp=WOS&ServiceName=TransferToWoS&DestLinkType=GeneralSearchSummary&Func=Links&author=Vilhelmson%20H
    Name: ISI
    Category: fullText
    Text: Nájsť tento článok vo Web of Science
    Icon: https://imagesrvr.epnet.com/ls/20docs.gif
    MouseOverText: Nájsť tento článok vo Web of Science
Header DbId: edsswe
DbLabel: SwePub
An: edsswe.oai.research.chalmers.se.cc40c0b3.4eb5.4aa3.80ee.0e2ec1a3129b
RelevancyScore: 1064
AccessLevel: 6
PubType: Academic Journal
PubTypeId: academicJournal
PreciseRelevancyScore: 1064.41540527344
IllustrationInfo
Items – Name: Title
  Label: Title
  Group: Ti
  Data: Dynamic vehicle–track interaction and structural loading in a crossing panel–calibration and assessment of a model with a 3D representation of the crossing rail
– Name: Author
  Label: Authors
  Group: Au
  Data: <searchLink fieldCode="AR" term="%22Vilhelmson%2C+Henrik%22">Vilhelmson, Henrik</searchLink>, 1997<br /><searchLink fieldCode="AR" term="%22Pålsson%2C+Björn%22">Pålsson, Björn</searchLink>, 1981<br /><searchLink fieldCode="AR" term="%22Nielsen%2C+Jens%22">Nielsen, Jens</searchLink>, 1963<br /><searchLink fieldCode="AR" term="%22Ossberger%2C+Uwe%22">Ossberger, Uwe</searchLink><br /><searchLink fieldCode="AR" term="%22Sehner%2C+Michael%22">Sehner, Michael</searchLink><br /><searchLink fieldCode="AR" term="%22Loy%2C+Harald%22">Loy, Harald</searchLink>
– Name: TitleSource
  Label: Source
  Group: Src
  Data: <i>Vehicle System Dynamics</i>. 62(12):3168-3190
– Name: Subject
  Label: Subject Terms
  Group: Su
  Data: <searchLink fieldCode="DE" term="%22dynamic+vehicle–track+interaction%22">dynamic vehicle–track interaction</searchLink><br /><searchLink fieldCode="DE" term="%22multibody+simulation%22">multibody simulation</searchLink><br /><searchLink fieldCode="DE" term="%22switches+%26+crossings%22">switches & crossings</searchLink><br /><searchLink fieldCode="DE" term="%22turnout%22">turnout</searchLink><br /><searchLink fieldCode="DE" term="%22Railway%22">Railway</searchLink><br /><searchLink fieldCode="DE" term="%223D+finite+element+model%22">3D finite element model</searchLink>
– Name: Abstract
  Label: Description
  Group: Ab
  Data: A three-dimensional (3D) finite element model of a railway crossing panel for use in multibody simulation (MBS) of dynamic vehicle–track interaction is presented. It is a two-layer track model with stock rails and sleepers represented by beam elements and a crossing rail represented by 3D solid elements. The track model uses linear bushings for the rail fastenings and bi-linear bushings for the ballast to allow for potentially voided sleepers. Based on the output from the MBS, the structural loading of the crossing in terms of strains, stresses and sleeper-ballast contact pressures is extracted in a post-processing step. The model is calibrated and validated to measurement data from a comprehensively instrumented switch & crossing (S&C) demonstrator installed in the Austrian railway network as a part of the European research programme Shift2Rail. The applied procedure for the calibration and critical assessment of the crossing model is described in detail. It is based on a model parameterisation with eight parameters relating to the rail fastening and foundation stiffnesses and to a distribution of the ballast voids. The calibration method uses Latin hypercube samples to explore the parameter space in a sensitivity analysis before a parameter optimisation is performed using a gradient-based method on a response surface built from a polyharmonic spline. In a comparative study it is shown that the 3D model and a more conventional beam model of the crossing rail show similar calibration results and good agreement with the measured data. The 3D model allows for the extraction of stress concentrations in the crossing rail but has an increased computational time of about 30% compared to the beam model.
– Name: Format
  Label: File Description
  Group: SrcInfo
  Data: electronic
– Name: URL
  Label: Access URL
  Group: URL
  Data: <link linkTarget="URL" linkTerm="https://research.chalmers.se/publication/540267" linkWindow="_blank">https://research.chalmers.se/publication/540267</link><br /><link linkTarget="URL" linkTerm="https://research.chalmers.se/publication/540267/file/540267_Fulltext.pdf" linkWindow="_blank">https://research.chalmers.se/publication/540267/file/540267_Fulltext.pdf</link>
PLink https://erproxy.cvtisr.sk/sfx/access?url=https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&db=edsswe&AN=edsswe.oai.research.chalmers.se.cc40c0b3.4eb5.4aa3.80ee.0e2ec1a3129b
RecordInfo BibRecord:
  BibEntity:
    Identifiers:
      – Type: doi
        Value: 10.1080/00423114.2024.2319275
    Languages:
      – Text: English
    PhysicalDescription:
      Pagination:
        PageCount: 23
        StartPage: 3168
    Subjects:
      – SubjectFull: dynamic vehicle–track interaction
        Type: general
      – SubjectFull: multibody simulation
        Type: general
      – SubjectFull: switches & crossings
        Type: general
      – SubjectFull: turnout
        Type: general
      – SubjectFull: Railway
        Type: general
      – SubjectFull: 3D finite element model
        Type: general
    Titles:
      – TitleFull: Dynamic vehicle–track interaction and structural loading in a crossing panel–calibration and assessment of a model with a 3D representation of the crossing rail
        Type: main
  BibRelationships:
    HasContributorRelationships:
      – PersonEntity:
          Name:
            NameFull: Vilhelmson, Henrik
      – PersonEntity:
          Name:
            NameFull: Pålsson, Björn
      – PersonEntity:
          Name:
            NameFull: Nielsen, Jens
      – PersonEntity:
          Name:
            NameFull: Ossberger, Uwe
      – PersonEntity:
          Name:
            NameFull: Sehner, Michael
      – PersonEntity:
          Name:
            NameFull: Loy, Harald
    IsPartOfRelationships:
      – BibEntity:
          Dates:
            – D: 01
              M: 01
              Type: published
              Y: 2024
          Identifiers:
            – Type: issn-print
              Value: 17445159
            – Type: issn-print
              Value: 00423114
            – Type: issn-locals
              Value: SWEPUB_FREE
            – Type: issn-locals
              Value: CTH_SWEPUB
          Numbering:
            – Type: volume
              Value: 62
            – Type: issue
              Value: 12
          Titles:
            – TitleFull: Vehicle System Dynamics
              Type: main
ResultId 1