Advances in 3D Printing for Electrochemical Energy Storage Systems
Uložené v:
| Názov: | Advances in 3D Printing for Electrochemical Energy Storage Systems |
|---|---|
| Autori: | Peter Samora Owuor, M. J. Jabeen Fatima, Prasanth Raghavan, Carlos A. Leon y Leon, Abdullah Khan, Haris Ali Khan, Ankitha Menon, Neethu T. M. Balakrishnan |
| Zdroj: | Journal of Material Science and Technology Research. 8:50-69 |
| Informácie o vydavateľovi: | Zeal Press, 2025. |
| Rok vydania: | 2025 |
| Predmety: | 02 engineering and technology, 0210 nano-technology, 7. Clean energy, 01 natural sciences, 0104 chemical sciences |
| Popis: | In the current scenario, energy generation is relied on the portable gadgets with more efficiency paving a way for new versatile and smart techniques for device fabrication. 3D printing is one of the most adaptable fabrication techniques based on designed architecture. The fabrication of 3D printed energy storage devices minimizes the manual labor enhancing the perfection of fabrication and reducing the risk of hazards. The perfection in fabrication technique enhances the performance of the device. The idea has been built upon by industry as well as academic research to print a variety of battery components such as cathode, anode, separator, etc. The main attraction of 3D printing is its cost-efficiency. There are tremendous savings in not having to manufacture battery cells separately and then assemble them into modules. This review highlights recent and important advances made in 3D printing of energy storage devices. The present review explains the common 3D printing techniques that have been used for the printing of electrode materials, separators, battery casings, etc. Also highlights the challenges present in the technique during the energy storage device fabrication in order to overcome the same to develop the process of 3D printing of the batteries to have comparable performance to, or even better performance than, conventional batteries. |
| Druh dokumentu: | Article Other literature type |
| ISSN: | 2410-4701 |
| DOI: | 10.31875/2410-4701.2021.08.7 |
| Prístupová URL adresa: | https://www.zealpress.com/jms/index.php/jmstr/article/download/333/299 |
| Prístupové číslo: | edsair.doi.dedup.....b1f761151adfc76626eff05082313c6c |
| Databáza: | OpenAIRE |
Nájsť tento článok vo Web of Science | Abstrakt: | In the current scenario, energy generation is relied on the portable gadgets with more efficiency paving a way for new versatile and smart techniques for device fabrication. 3D printing is one of the most adaptable fabrication techniques based on designed architecture. The fabrication of 3D printed energy storage devices minimizes the manual labor enhancing the perfection of fabrication and reducing the risk of hazards. The perfection in fabrication technique enhances the performance of the device. The idea has been built upon by industry as well as academic research to print a variety of battery components such as cathode, anode, separator, etc. The main attraction of 3D printing is its cost-efficiency. There are tremendous savings in not having to manufacture battery cells separately and then assemble them into modules. This review highlights recent and important advances made in 3D printing of energy storage devices. The present review explains the common 3D printing techniques that have been used for the printing of electrode materials, separators, battery casings, etc. Also highlights the challenges present in the technique during the energy storage device fabrication in order to overcome the same to develop the process of 3D printing of the batteries to have comparable performance to, or even better performance than, conventional batteries. |
|---|---|
| ISSN: | 24104701 |
| DOI: | 10.31875/2410-4701.2021.08.7 |